- 04 Oct, 2007 3 commits
-
-
Scott Wood authored
This introduces a new device binding for the CPM and other devices on these boards. Some of the changes include: 1. Proper namespace scoping for Freescale compatibles and properties. 2. Use compatible rather than things like device_type and model to determine which particular variant of a device is present. 3. Give the drivers the relevant CPM command word directly, rather than requiring it to have a lookup table based on device-id, SCC v. SMC, and CPM version. 4. Specify the CPCR and the usable DPRAM region in the CPM's reg property. Boards that do not require the legacy bindings should select CONFIG_PPC_CPM_NEW_BINDING to enable the of_platform CPM devices. Once all existing boards are converted and tested, the config option can become default y to prevent new boards from using the old model. Once arch/ppc is gone, the config option can be removed altogether. Signed-off-by:
Scott Wood <scottwood@freescale.com> Acked-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Scott Wood authored
As suggested by David Gibson, now that we have a separate node for the baud rate generators, it's better to use the standard clock-frequency property than a cpm-node-level fsl,brg-frequency property. This patch updates existing places where fsl,brg-frequency is used. Signed-off-by:
-
Paul Mackerras authored
Commit 8112753b made 44x in ARCH=powerpc builds use cpu setup routines in cpu_setup_44x.S, but didn't make a similar change for ARCH=ppc, and consequently the ARCH=ppc builds fail with undefined symbols (since both use the same cputable.c). This fixes it by including cpu_setup_44x.S in the ARCH=ppc builds, and by taking out the now-redundant FPU initialization in arch/ppc/kernel/head_44x.S. Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
- 03 Oct, 2007 37 commits
-
-
Grant Likely authored
Reverts commit a15da8ef This driver is used by devices other than the xilinx opb-uartlite which depend on bytewise access to the registers. The change to 32 bit access does not work on these devices. Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Acked-by:
Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
Josh Boyer <jwboyer@linux.vnet.ibm.com>
-
Grant Likely authored
Add macros to define register names to improve readability. Signed-off-by:
-
Grant Likely authored
This simply adds the boilerplate default Ethernet address to embed_config for the Xilinx platform (bug fix). Signed-off-by:
-
Grant Likely authored
XilnixFB can be used by more than just arch/ppc. Move the data structure definition into include/linux/xilinxfb.h so it can be used by microblaze and arch/powerpc Signed-off-by:
-
Grant Likely authored
Flush the uartlite RX fifo so that characters typed before entry into the zImage wrapper do not muck up the kernel command line. Signed-off-by:
-
Josh Boyer authored
Tell git to ignore the generated treeImage.* files in arch/powerpc/boot Signed-off-by: -
Grant Likely authored
By configuring it earlier we get console output sooner which is helpful for debugging when the kernel crashes before the serial drivers are initialized. Signed-off-by:
-
Grant Likely authored
Add of_platform bus binding so this driver can be used with arch/powerpc Signed-off-by:
-
Grant Likely authored
Tidy the comments to split the driver into logical section; the main driver, the console driver, the platform bus binding, and module initialization and teardown. Signed-off-by:
-
Grant Likely authored
Separate the bus binding code from the driver structure allocation code in preparation for adding the of_platform_bus bindings needed by arch/powerpc Signed-off-by:
-
Grant Likely authored
Changed to make the following OF_platform bus binding patch a wee bit cleaner Signed-off-by:
-
Grant Likely authored
Changed to match naming convention used in the rest of the module Signed-off-by:
-
Grant Likely authored
The Uartlite data sheet defines the registers as 32 bit wide. This patch changes the register access to use 32 bit transfers and eliminates the magic +3 offset which is currently required to make the device work. Signed-off-by:
John Williams <jwilliams@itee.uq.edu.au> Signed-off-by:
-
Grant Likely authored
Signed-off-by:
-
Grant Likely authored
Adds support for generic Xilinx Virtex boards. Any board which specifies "xilinx,virtex" in the compatible property will make use of this board support. Signed-off-by:
-
Grant Likely authored
Adds support for the Xilinx opb-intc interrupt controller Signed-off-by:
-
Grant Likely authored
Add the needed kconfig macros to enable Xilinx Virtex board support Signed-off-by:
-
Grant Likely authored
Allows the bootwrapper to use the uartlite device for console output. Signed-off-by:
-
Valentine Barshak authored
Add a workaround for PowerPC 440EPx/GRx incorrect write to DDR SDRAM errata. Data can be written to wrong address in SDRAM when write pipelining enabled on plb0. We disable it in the cpu_setup for these processors at early init. Signed-off-by:
Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by:
-
Valentine Barshak authored
The PowerPC 440EP(x) FPU init is currently done in head_44x under ifdefs. Since we should support more then one board in the same kernel, we move FPU initialization code from head_44x to cpu_setup_44x and add cpu_setup callbacks for 440EP(x). Signed-off-by:
-
Valentine Barshak authored
This adds cpu_setup functionality for ppc44x platform. Low level cpu-spefic initialization routines should be placed in cpu_setup_44x.S and a callback should be added to cputable. The cpu_setup is invoked by identify_cpu() function at early init. Signed-off-by:
-
Josh Boyer authored
Pass the appropriate -mcpu flag to the treeboot-walnut.o object to prevent some toolchains from erroring out with unknown opcodes Signed-off-by: -
Tony Breeds authored
Signed-off-by:
Tony Breeds <tony@bakeyournoodle.com> Signed-off-by:
-
Tony Breeds authored
This registers a clock event structure for the decrementer and turns on CONFIG_GENERIC_CLOCKEVENTS, which means that we now don't need most of timer_interrupt(), since the work is done in generic code. For secondary CPUs, their decrementer clockevent is registered when the CPU comes up (the generic code automatically removes the clockevent when the CPU goes down). Signed-off-by:
-
git://git.bocc.de/dbox2Paul Mackerras authored
-
Paul Mackerras authored
-
Tony Breeds authored
Some older pSeries machines were panicking in pSeries_log_error because it was getting called before it was ready. This is a result of commit "[POWERPC] pseries: Fix jumbled no_logging flag." (79c0108d). This fixes it by explicitly enabling RTAS error logging when it has been initialized, and also makes the code clearer by renaming the "no_more_logging" variable to "logging_enabled". Signed-off-by:
-
Linas Vepstas authored
Use alloc_maybe_bootmem() which wraps the if (mem_init_done) malloc clause. Signed-off-by:
Linas Vepstas <linas@austin.ibm.com> Signed-off-by:
-
Ishizaki Kou authored
This adds support for the PCI bus on Celleb with new "I/O routines for PowerPC." External PCI on Celleb must do explicit synchronization with devices (Bus has no automatic synchronization feature). Signed-off-by:
Kou Ishizaki <Kou.Ishizaki@toshiba.co.jp> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Ishizaki Kou authored
This is an update for Serial I/O on Celleb. - Detection algorithm has been changed Signed-off-by:
-
Ishizaki Kou authored
This changes the Celleb code to work with new Guest OS Interface to tweak HTAB on Beat. It detects old and new Guest OS Interfaces automatically. Signed-off-by:
Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by:
-
Ishizaki Kou authored
This supports Power/Reset buttons on Beat on Celleb. On Beat, we have an event from Beat if Power button or Reset button is pressed. This patch catches the event and convert it to a signal to INIT process by calling ctrl_alt_del() function. /sbin/inittab have no entry to turn the machine power off so we have to detect if power button is pressed or not internally in our driver. This idea is taken from PS3's event handling subsystem. Signed-off-by:
-
Ishizaki Kou authored
This is an update for "Beat on Celleb" - Move beat_pause(), beat_kexec_cpu_down() from setup.c to beat.c Signed-off-by: <Kou.Ishizaki@toshiba.co.jp> Acked-by:
-
Joachim Fenkes authored
Signed-off-by:
Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by:
-
Michael Ellerman authored
Now that dcr_host_t contains the base address, we can use that in the axon_msi code, rather than storing it separately. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Michael Ellerman authored
Now that dcr_host_t contains the base address, we can use that in the mpic code, rather than storing it separately. Signed-off-by:
-
Michael Ellerman authored
In its current form, dcr_map() doesn't remember the base address you passed it, which means you need to store it somewhere else. Rather than adding the base to another struct it seems simpler to store it in the dcr_host_t. Signed-off-by:
-
