- 23 Jun, 2005 40 commits
-
-
Prasanna S Panchamukhi authored
This patch includes sparc64 architecture specific changes to support temporary disarming on reentrancy of probes. Signed-of-by:
Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Prasanna S Panchamukhi authored
This patch includes ppc64 architecture specific changes to support temporary disarming on reentrancy of probes. Signed-of-by:
-
Prasanna S Panchamukhi authored
This patch includes x86_64 architecture specific changes to support temporary disarming on reentrancy of probes. Signed-of-by:
-
Prasanna S Panchamukhi authored
This patch includes i386 architecture specific changes to support temporary disarming on reentrancy of probes. Signed-of-by:
-
Prasanna S Panchamukhi authored
In situations where a kprobes handler calls a routine which has a probe on it, then kprobes_handler() disarms the new probe forever. This patch removes the above limitation by temporarily disarming the new probe. When the another probe hits while handling the old probe, the kprobes_handler() saves previous kprobes state and handles the new probe without calling the new kprobes registered handlers. kprobe_post_handler() restores back the previous kprobes state and the normal execution continues. However on x86_64 architecture, re-rentrancy is provided only through pre_handler(). If a routine having probe is referenced through post_handler(), then the probes on that routine are disarmed forever, since the exception stack is gets changed after the processor single steps the instruction of the new probe. This patch includes generic changes to support temporary disarming on reentrancy of probes. Signed-of-by:
-
Keshavamurthy Anil S authored
Once the jprobe instrumented function returns, it executes a jprobe_break which is a break instruction with __IA64_JPROBE_BREAK value. The current patch checks for this break value, before assuming that jprobe instrumented function just completed. The previous code was not checking for this value and that was a bug. Signed-off-by:
Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by:
-
Anil S Keshavamurthy authored
The current kprobes does not yet handle register kprobes on some of the following kind of instruction which needs to be emulated in a special way. 1) mov r1=ip 2) chk -- Speculation check instruction This patch attempts to fail register_kprobes() when user tries to insert kprobes on the above kind of instruction. Signed-off-by:
-
Anil S Keshavamurthy authored
The current Kprobes when patching the original instruction with the break instruction tries to retain the original qualifying predicate(qp), however for cmp.crel.ctype where ctype == unc, which is a special instruction always needs to be executed irrespective of qp. Hence, if the instruction we are patching is of this type, then we should not copy the original qp to the break instruction, this is because we always want the break fault to happen so that we can emulate the instruction. This patch is based on the feedback given by David Mosberger Signed-off-by:
-
Anil S Keshavamurthy authored
arch_prepare_kprobes() was doing lots of functionality in just one single function. This patch attempts to clean up arch_prepare_kprobes() by moving specific sub task to the following (new)functions 1)valid_kprobe_addr() -->> validate the given kprobe address 2)get_kprobe_inst(slot..)->> Retrives the instruction for a given slot from the bundle 3)prepare_break_inst() -->> Prepares break instruction within the bundle 3a)update_kprobe_inst_flag()-->>Updates the internal flags, required for proper emulation of the instruction at later point in time. Signed-off-by:
-
Rusty Lynch authored
Fix a bug where a kprobe still fires when the instruction is predicated off. So given the p6=0, and we have an instruction like: (p6) move loc1=0 we should not be triggering the kprobe. This is handled by carrying over the qp section of the original instruction into the break instruction. Signed-off-by:
Rusty Lynch <Rusty.lynch@intel.com> Signed-off-by:
-
Rusty Lynch authored
A cleanup of the ia64 kprobes implementation such that all of the bundle manipulation logic is concentrated in arch_prepare_kprobe(). With the current design for kprobes, the arch specific code only has a chance to return failure inside the arch_prepare_kprobe() function. This patch moves all of the work that was happening in arch_copy_kprobe() and most of the work that was happening in arch_arm_kprobe() into arch_prepare_kprobe(). By doing this we can add further robustness checks in arch_arm_kprobe() and refuse to insert kprobes that will cause problems. Signed-off-by:
-
Anil S Keshavamurthy authored
This patch is required to support kprobe on branch/call instructions. Signed-off-by:
-
Anil S Keshavamurthy authored
This patch adds IA64 architecture specific JProbes support on top of Kprobes Signed-off-by:
-
Anil S Keshavamurthy authored
This is an IA64 arch specific handling of Kprobes Signed-off-by:
-
Anil S Keshavamurthy authored
As many of you know that kprobes exist in the main line kernel for various architecture including i386, x86_64, ppc64 and sparc64. Attached patches following this mail are a port of Kprobes and Jprobes for IA64. I have tesed this patches for kprobes and Jprobes and this seems to work fine. I have tested this patch by inserting kprobes on various slots and various templates including various types of branch instructions. I have also tested this patch using the tool http://marc.theaimsgroup.com/?l=linux-kernel&m=111657358022586&w=2 and the kprobes for IA64 works great. Here is list of TODO things and pathes for the same will appear soon. 1) Support kprobes on "mov r1=ip" type of instruction 2) Support Kprobes and Jprobes to exist on the same address 3) Support Return probes 3) Architecture independent cleanup of kprobes This patch adds the kdebug die notification mechanism needed by Kprobes. For break instruction on Branch type slot, imm21 is ignored and value zero is placed in IIM register, hence we need to handle kprobes for switch case zero. Signed-off-by:
-
Hien Nguyen authored
This patch moves the lock/unlock of the arch specific kprobe_flush_task() to the non-arch specific kprobe_flusk_task(). Signed-off-by:
Hien Nguyen <hien@us.ibm.com> Acked-by:
-
Rusty Lynch authored
The architecture independent code of the current kprobes implementation is arming and disarming kprobes at registration time. The problem is that the code is assuming that arming and disarming is a just done by a simple write of some magic value to an address. This is problematic for ia64 where our instructions look more like structures, and we can not insert break points by just doing something like: *p->addr = BREAKPOINT_INSTRUCTION; The following patch to 2.6.12-rc4-mm2 adds two new architecture dependent functions: * void arch_arm_kprobe(struct kprobe *p) * void arch_disarm_kprobe(struct kprobe *p) and then adds the new functions for each of the architectures that already implement kprobes (spar64/ppc64/i386/x86_64). I thought arch_[dis]arm_kprobe was the most descriptive of what was really happening, but each of the architectures already had a disarm_kprobe() function that was really a "disarm and do some other clean-up items as needed when you stumble across a recursive kprobe." So... I took the liberty of changing the code that was calling disarm_kprobe() to call arch_disarm_kprobe(), and then do the cleanup in the block of code dealing with the recursive kprobe case. So far this patch as been tested on i386, x86_64, and ppc64, but still needs to be tested in sparc64. Signed-off-by: -
Rusty Lynch authored
The following patch adds the x86_64 architecture specific implementation for function return probes. Function return probes is a mechanism built on top of kprobes that allows a caller to register a handler to be called when a given function exits. For example, to instrument the return path of sys_mkdir: static int sys_mkdir_exit(struct kretprobe_instance *i, struct pt_regs *regs) { printk("sys_mkdir exited\n"); return 0; } static struct kretprobe return_probe = { .handler = sys_mkdir_exit, }; <inside setup function> return_probe.kp.addr = (kprobe_opcode_t *) kallsyms_lookup_name("sys_mkdir"); if (register_kretprobe(&return_probe)) { printk(KERN_DEBUG "Unable to register return probe!\n"); /* do error path */ } <inside cleanup function> unregister_kretprobe(&return_probe); The way this works is that: * At system initialization time, kernel/kprobes.c installs a kprobe on a function called kretprobe_trampoline() that is implemented in the arch/x86_64/kernel/kprobes.c (More on this later) * When a return probe is registered using register_kretprobe(), kernel/kprobes.c will install a kprobe on the first instruction of the targeted function with the pre handler set to arch_prepare_kretprobe() which is implemented in arch/x86_64/kernel/kprobes.c. * arch_prepare_kretprobe() will prepare a kretprobe instance that stores: - nodes for hanging this instance in an empty or free list - a pointer to the return probe - the original return address - a pointer to the stack address With all this stowed away, arch_prepare_kretprobe() then sets the return address for the targeted function to a special trampoline function called kretprobe_trampoline() implemented in arch/x86_64/kernel/kprobes.c * The kprobe completes as normal, with control passing back to the target function that executes as normal, and eventually returns to our trampoline function. * Since a kprobe was installed on kretprobe_trampoline() during system initialization, control passes back to kprobes via the architecture specific function trampoline_probe_handler() which will lookup the instance in an hlist maintained by kernel/kprobes.c, and then call the handler function. * When trampoline_probe_handler() is done, the kprobes infrastructure single steps the original instruction (in this case just a top), and then calls trampoline_post_handler(). trampoline_post_handler() then looks up the instance again, puts the instance back on the free list, and then makes a long jump back to the original return instruction. So to recap, to instrument the exit path of a function this implementation will cause four interruptions: - A breakpoint at the very beginning of the function allowing us to switch out the return address - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) - A breakpoint in the trampoline function where our instrumented function returned to - A single step interruption to execute the original instruction that we replaced with the break instruction (normal kprobe flow) Signed-off-by: -
Hien Nguyen authored
This patch adds function-return probes to kprobes for the i386 architecture. This enables you to establish a handler to be run when a function returns. 1. API Two new functions are added to kprobes: int register_kretprobe(struct kretprobe *rp); void unregister_kretprobe(struct kretprobe *rp); 2. Registration and unregistration 2.1 Register To register a function-return probe, the user populates the following fields in a kretprobe object and calls register_kretprobe() with the kretprobe address as an argument: kp.addr - the function's address handler - this function is run after the ret instruction executes, but before control returns to the return address in the caller. maxactive - The maximum number of instances of the probed function that can be active concurrently. For example, if the function is non- recursive and is called with a spinlock or mutex held, maxactive = 1 should be enough. If the function is non-recursive and can never relinquish the CPU (e.g., via a semaphore or preemption), NR_CPUS should be enough. maxactive is used to determine how many kretprobe_instance objects to allocate for this particular probed function. If maxactive <= 0, it is set to a default value (if CONFIG_PREEMPT maxactive=max(10, 2 * NR_CPUS) else maxactive=NR_CPUS) For example: struct kretprobe rp; rp.kp.addr = /* entrypoint address */ rp.handler = /*return probe handler */ rp.maxactive = /* e.g., 1 or NR_CPUS or 0, see the above explanation */ register_kretprobe(&rp); The following field may also be of interest: nmissed - Initialized to zero when the function-return probe is registered, and incremented every time the probed function is entered but there is no kretprobe_instance object available for establishing the function-return probe (i.e., because maxactive was set too low). 2.2 Unregister To unregiter a function-return probe, the user calls unregister_kretprobe() with the same kretprobe object as registered previously. If a probed function is running when the return probe is unregistered, the function will return as expected, but the handler won't be run. 3. Limitations 3.1 This patch supports only the i386 architecture, but patches for x86_64 and ppc64 are anticipated soon. 3.2 Return probes operates by replacing the return address in the stack (or in a known register, such as the lr register for ppc). This may cause __builtin_return_address(0), when invoked from the return-probed function, to return the address of the return-probes trampoline. 3.3 This implementation uses the "Multiprobes at an address" feature in 2.6.12-rc3-mm3. 3.4 Due to a limitation in multi-probes, you cannot currently establish a return probe and a jprobe on the same function. A patch to remove this limitation is being tested. This feature is required by SystemTap (http://sourceware.org/systemtap), and reflects ideas contributed by several SystemTap developers, including Will Cohen and Ananth Mavinakayanahalli. Signed-off-by:Frederik Deweerdt <frederik.deweerdt@laposte.net> Signed-off-by:
-
Christoph Hellwig authored
Use lookup_one_len instead of opencoding a simplified lookup using lookup_hash with a fake hash. Also there's no need anymore for the d_invalidate as we have a completely valid dentry now. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Christoph Hellwig authored
Move some code duplicated in both callers into vfs_quota_on_mount Signed-off-by:
Jan Kara <jack@ucw.cz> Signed-off-by:
-
Alexander Nyberg authored
Prevent recursive faults in do_exit() by leaving the task alone and wait for reboot. This may allow a more graceful shutdown and possibly save the original oops. Signed-off-by:
Alexander Nyberg <alexn@telia.com> Signed-off-by:
-
Christoph Hellwig authored
Various filesystem drivers have grown a get_dentry() function that's a duplicate of lookup_one_len, except that it doesn't take a maximum length argument and doesn't check for \0 or / in the passed in filename. Switch all these places to use lookup_one_len. Signed-off-by:
-
Neil Horman authored
Patch to add check to get_chrdev_list and get_blkdev_list to prevent reads of /proc/devices from spilling over the provided page if more than 4096 bytes of string data are generated from all the registered character and block devices in a system Signed-off-by:
Neil Horman <nhorman@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by:
-
Pekka Enberg authored
This patch removes redundant VM_ClearReadHint from mm/madvice.c which was left there by Prasanna's patch. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by:
-
Jesper Juhl authored
In kernel/sched.c the return value from preempt_count() is cast to an int. That made sense when preempt_count was defined as different types on is not needed and should go away. The patch removes the cast. In kernel/timer.c the return value from preempt_count() is assigned to a variable of type u32 and then that unsigned value is later compared to preempt_count(). Since preempt_count() returns an int, an int is what should be used to store its return value. Storing the result in an unsigned 32bit integer made a tiny bit of sense back when preempt_count was different types on different archs, but no more - let's not play signed vs unsigned comparison games when we don't have to. The patch modifies the code to use an int to hold the value. While I was around that bit of code I also made two changes to a nearby (related) printk() - I modified it to specify the loglevel explicitly and also broke the line into a few pieces to avoid it being longer than 80 chars and clarified the text a bit. Signed-off-by:
Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by:
-
Jesper Juhl authored
The preempt_count member of struct thread_info is currently either defined as int, unsigned int or __s32 depending on arch. This patch makes the type of preempt_count an int on all archs. Having preempt_count be an unsigned type prevents the catching of preempt_count < 0 bugs, and using int on some archs and __s32 on others is not exactely "neat" - much nicer when it's just int all over. A previous version of this patch was already ACK'ed by Robert Love, and the only change in this version of the patch compared to the one he ACK'ed is that this one also makes sure the preempt_count member is consistently commented. Signed-off-by:
-
Nick Piggin authored
Looks like locking can be optimised quite a lot. Increase lock widths slightly so lo_lock is taken fewer times per request. Also it was quite trivial to cover lo_pending with that lock, and remove the atomic requirement. This also makes memory ordering explicitly correct, which is nice (not that I particularly saw any mem ordering bugs). Test was reading 4 250MB files in parallel on ext2-on-tmpfs filesystem (1K block size, 4K page size). System is 2 socket Xeon with HT (4 thread). intel:/home/npiggin# umount /dev/loop0 ; mount /dev/loop0 /mnt/loop ; /usr/bin/time ./mtloop.sh Before: 0.24user 5.51system 0:02.84elapsed 202%CPU (0avgtext+0avgdata 0maxresident)k 0.19user 5.52system 0:02.88elapsed 198%CPU (0avgtext+0avgdata 0maxresident)k 0.19user 5.57system 0:02.89elapsed 198%CPU (0avgtext+0avgdata 0maxresident)k 0.22user 5.51system 0:02.90elapsed 197%CPU (0avgtext+0avgdata 0maxresident)k 0.19user 5.44system 0:02.91elapsed 193%CPU (0avgtext+0avgdata 0maxresident)k After: 0.07user 2.34system 0:01.68elapsed 143%CPU (0avgtext+0avgdata 0maxresident)k 0.06user 2.37system 0:01.68elapsed 144%CPU (0avgtext+0avgdata 0maxresident)k 0.06user 2.39system 0:01.68elapsed 145%CPU (0avgtext+0avgdata 0maxresident)k 0.06user 2.36system 0:01.68elapsed 144%CPU (0avgtext+0avgdata 0maxresident)k 0.06user 2.42system 0:01.68elapsed 147%CPU (0avgtext+0avgdata 0maxresident)k Signed-off-by:
Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Greg Edwards authored
According to include/linux/console.h, CON_CONSDEV flag should be set on the last console specified on the boot command line: 86 #define CON_PRINTBUFFER (1) 87 #define CON_CONSDEV (2) /* Last on the command line */ 88 #define CON_ENABLED (4) 89 #define CON_BOOT (8) This does not currently happen if there is more than one console specified on the boot commandline. Instead, it gets set on the first console on the command line. This can cause problems for things like kdb that look for the CON_CONSDEV flag to see if the console is valid. Additionaly, it doesn't look like CON_CONSDEV is reassigned to the next preferred console at unregister time if the console being unregistered currently has that bit set. Example (from sn2 ia64): elilo vmlinuz root=<dev> console=ttyS0 console=ttySG0 in this case, the flags on ttySG console struct will be 0x4 (should be 0x6). Attached patch against bk fixes both issues for the cases I looked at. It uses selected_console (which gets incremented for each console specified on the command line) as the indicator of which console to set CON_CONSDEV on. When adding the console to the list, if the previous one had CON_CONSDEV set, it masks it out. Tested on ia64 and x86. The problem with the current behavior is it breaks overriding the default from the boot line. In the ia64 case, there may be a global append line defining console=a in elilo.conf. Then you want to boot your kernel, and want to override the default by passing console=b on the boot line. elilo constructs the kernel cmdline by starting with the value of the global append line, then tacks on whatever else you specify, which puts console=b last. Signed-off-by:Greg Edwards <edwardsg@sgi.com> Signed-off-by:
-
Robert Love authored
Convert a bunch of strdup() implementations and their callers to the new kstrdup(). A few remain, for example see sound/core, and there are tons of open coded strdup()'s around. Sigh. But this is a start. Signed-off-by:
Robert Love <rml@novell.com> Signed-off-by:
-
Paulo Marques authored
This patch creates a new kstrdup library function and changes the "local" implementations in several places to use this function. Most of the changes come from the sound and net subsystems. The sound part had already been acknowledged by Takashi Iwai and the net part by David S. Miller. I left UML alone for now because I would need more time to read the code carefully before making changes there. Signed-off-by:
Paulo Marques <pmarques@grupopie.com> Signed-off-by:
-
Alexander Viro authored
Based on analysis and a patch from Russ Weight <rweight@us.ibm.com> There is a race condition that can occur if an inode is allocated and then released (using iput) during the ->fill_super functions. The race condition is between kswapd and mount. For most filesystems this can only happen in an error path when kswapd is running concurrently. For isofs, however, the error can occur in a more common code path (which is how the bug was found). The logic here is "we want final iput() to free inode *now* instead of letting it sit in cache if fs is going down or had not quite come up". The problem is with kswapd seeing such inodes in the middle of being killed and happily taking over. The clean solution would be to tell kswapd to leave those inodes alone and let our final iput deal with them. I.e. add a new flag (I_FORCED_FREEING), set it before write_inode_now() there and make prune_icache() leave those alone. Signed-off-by:
-
Oleg Nesterov authored
sys_timer_settime/sys_timer_delete needs to delete k_itimer->real.timer synchronously while holding ->it_lock, which is also locked in posix_timer_fn. This patch removes timer_active/set_timer_inactive which plays with timer_list's internals in favour of using try_to_del_timer_sync(), which was introduced in the previous patch. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Oleg Nesterov authored
This patch splits del_timer_sync() into 2 functions. The new one, try_to_del_timer_sync(), returns -1 when it hits executing timer. It can be used in interrupt context, or when the caller hold locks which can prevent completion of the timer's handler. NOTE. Currently it can't be used in interrupt context in UP case, because ->running_timer is used only with CONFIG_SMP. Should the need arise, it is possible to kill #ifdef CONFIG_SMP in set_running_timer(), it is cheap. Signed-off-by:
-
Oleg Nesterov authored
This patch tries to solve following problems: 1. del_timer_sync() is racy. The timer can be fired again after del_timer_sync have checked all cpus and before it will recheck timer_pending(). 2. It has scalability problems. All cpus are scanned to determine if the timer is running on that cpu. With this patch del_timer_sync is O(1) and no slower than plain del_timer(pending_timer), unless it has to actually wait for completion of the currently running timer. The only restriction is that the recurring timer should not use add_timer_on(). 3. The timers are not serialized wrt to itself. If CPU_0 does mod_timer(jiffies+1) while the timer is currently running on CPU 1, it is quite possible that local interrupt on CPU_0 will start that timer before it finished on CPU_1. 4. The timers locking is suboptimal. __mod_timer() takes 3 locks at once and still requires wmb() in del_timer/run_timers. The new implementation takes 2 locks sequentially and does not need memory barriers. Currently ->base != NULL means that the timer is pending. In that case ->base.lock is used to lock the timer. __mod_timer also takes timer->lock because ->base can be == NULL. This patch uses timer->entry.next != NULL as indication that the timer is pending. So it does __list_del(), entry->next = NULL instead of list_del() when the timer is deleted. The ->base field is used for hashed locking only, it is initialized in init_timer() which sets ->base = per_cpu(tvec_bases). When the tvec_bases.lock is locked, it means that all timers which are tied to this base via timer->base are locked, and the base itself is locked too. So __run_timers/migrate_timers can safely modify all timers which could be found on ->tvX lists (pending timers). When the timer's base is locked, and the timer removed from ->entry list (which means that _run_timers/migrate_timers can't see this timer), it is possible to set timer->base = NULL and drop the lock: the timer remains locked. This patch adds lock_timer_base() helper, which waits for ->base != NULL, locks the ->base, and checks it is still the same. __mod_timer() schedules the timer on the local CPU and changes it's base. However, it does not lock both old and new bases at once. It locks the timer via lock_timer_base(), deletes the timer, sets ->base = NULL, and unlocks old base. Then __mod_timer() locks new_base, sets ->base = new_base, and adds this timer. This simplifies the code, because AB-BA deadlock is not possible. __mod_timer() also ensures that the timer's base is not changed while the timer's handler is running on the old base. __run_timers(), del_timer() do not change ->base anymore, they only clear pending flag. So del_timer_sync() can test timer->base->running_timer == timer to detect whether it is running or not. We don't need timer_list->lock anymore, this patch kills it. We also don't need barriers. del_timer() and __run_timers() used smp_wmb() before clearing timer's pending flag. It was needed because __mod_timer() did not lock old_base if the timer is not pending, so __mod_timer()->list_add() could race with del_timer()->list_del(). With this patch these functions are serialized through base->lock. One problem. TIMER_INITIALIZER can't use per_cpu(tvec_bases). So this patch adds global struct timer_base_s { spinlock_t lock; struct timer_list *running_timer; } __init_timer_base; which is used by TIMER_INITIALIZER. The corresponding fields in tvec_t_base_s struct are replaced by struct timer_base_s t_base. It is indeed ugly. But this can't have scalability problems. The global __init_timer_base.lock is used only when __mod_timer() is called for the first time AND the timer was compile time initialized. After that the timer migrates to the local CPU. Signed-off-by:Ingo Molnar <mingo@elte.hu> Signed-off-by:
Renaud Lienhart <renaud.lienhart@free.fr> Signed-off-by:
-
Nick Piggin authored
get_request_wait needn't unplug the device immediately. Signed-off-by:
-
Nick Piggin authored
Sprinkle around a few branch hints in the block layer. Signed-off-by:
-
Nick Piggin authored
This memory barrier is not needed because the waitqueue will only get waiters on it in the following situations: rq->count has exceeded the threshold - however all manipulations of ->count are performed under the runqueue lock, and so we will correctly pick up any waiter. Memory allocation for the request fails. In this case, there is no additional help provided by the memory barrier. We are guaranteed to eventually wake up waiters because the request allocation mempool guarantees that if the mem allocation for a request fails, there must be some requests in flight. They will wake up waiters when they are retired. Signed-off-by:
-
Tejun Heo authored
Add KERN_ERR and __FUNCTION__ to generic tag error messages, and add a comment in blk_queue_end_tag() which explains the silent failure path. Signed-off-by:
Tejun Heo <htejun@gmail.com> Acked-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Tejun Heo authored
Replace BLK_TAGS_PER_LONG with BITS_PER_LONG and remove unused BLK_TAGS_MASK. Signed-off-by:
-
