drivers/md/dm-exception-store.c: In function 'persistent_read_metadata':
drivers/md/dm-exception-store.c:452: warning: 'new_snapshot' may be used uninitialized in this function
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Replace semaphore with mutex.
Signed-off-by: Daniel Walker <dwalker@mvista.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Since the source file already includes the log2.h header file, it
seems pointless to re-invent the necessary routine.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

"total = 0" does nothing.
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Save some bytes.
Signed-off-by: Vasily Averin <vvs@sw.ru>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

This patch is some minor janitorish cleanup, using some macros
from linux/list.h (already #included via dm.h) to improve
readability.
Signed-off-by: Paul Jimenez <pj@place.org>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Move compat_ioctl handling into dm-ioctl.c.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Remove lock_kernel() from the device-mapper ioctls - there should
be sufficient internal locking already where required.

Also remove some superfluous casts.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Add a couple of statics.
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Add memory barrier to fix atomic_read of pending value.
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  BKL-removal: Implement a compat_ioctl handler for JFS
  BKL-removal: Use unlocked_ioctl for jfs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (34 commits)
  Input: i8042 - non-x86 build fix
  Input: pxa27x_keypad - also enable on PXA3xx
  Input: pxa27x_keypad - add debounce_interval to the keypad platform data
  Input: pxa27x_keypad - use device resources for I/O memory mapping and IRQ
  Input: pxa27x_keypad - enable rotary encoders and direct keys
  Input: pxa27x_keypad - introduce pxa27x_keypad_config()
  Input: pxa27x_keypad - introduce driver structure and use KEY() to define matrix keys
  Input: pxa27x_keypad - remove pin configuration from the driver
  Input: pxa27x_keypad - rename the driver (was pxa27x_keyboard)
  Input: constify function pointer tables (seq_operations)
  Input: i8042 - add Fujitsu-Siemens Amilo Pro 2010 to nomux list
  Input: i8042 - enable DMI quirks on x86-64
  Input: i8042 - add Dritek quirk for Acer Aspire 9110
  Input: add input event to APM event bridge
  Input: mousedev - use BIT_MASK instead of BIT
  Input: remove duplicate includes
  Input: remove cdev from input_dev structure
  Input: remove duplicated headers in drivers/char/keyboard.c
  Input: i8042 - add Dritek keyboard extension quirk
  Input: add Tosa keyboard driver
  ...

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Negotiate locking protocol versions.

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  sysfs: remove BUG_ON() from sysfs_remove_group()
  Driver core: Revert "Fix Firmware class name collision"
  Block: Fix whole_disk attribute bug

The ioctls were already compatible except for the actual values so this
was fairly easy to do.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>

Make sure we have enough room for all the GR registers or we'll end up
clobbering the AR index register (which should actually be harmless
unless the BIOS is making an assumption about it).
Noticed-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jesse Barnes <jesse.barnes@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Convert jfs_ioctl over to not use the BKL. The only potential race
I could see was with two ioctls in parallel changing the flags
and losing the updates. Use the i_mutex to protect against this.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>

It's possible that the caller of sysfs_remove_group messed up and passed in an attribute group that was not really registered to this kobject.  But don't panic for such a foolish error, spit out a warning about what happened, and continue on our way safely.

Cc: Roland Dreier <rdreier@cisco.com>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This reverts commit 109f0e93.

The original patch breaks BIOS updates on all Dell machines. The path to
the firmware file for the dell_rbu driver changes, which breaks all of
the userspace tools which rely on it.

Note that this patch re-introduces a problem with i2c name collision
that was previously fixed by this patch.
Signed-off-by: Michael E Brown <michael_e_brown@dell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The "whole_disk" attribute was not properly converted in the block
device conversion earlier, and if the file is read, bad things can
happen.  This patch fixes this, making the attribute an empty one,
preserving the original functionality.

Many thanks to David Miller for finding this, and pointing me in the
proper place within the block code to look.
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC32]: Use regsets in arch_ptrace().
  [SPARC64]: Use regsets in arch_ptrace().
  [SPARC32]: Use regsets for ELF core dumping.
  [SPARC64]: Use regsets for ELF core dumping.
  [SPARC64]: Remove unintentional ptrace debugging messages.
  [SPARC]: Move over to arch_ptrace().
  [SPARC]: Remove PTRACE_SUN* handling.
  [SPARC]: Kill DEBUG_PTRACE code.
  [SPARC32]: Add user regset support.
  [SPARC64]: Add user regsets.
  [SPARC64]: Fix booting on non-zero cpu.

* git://git.infradead.org/mtd-2.6: (120 commits)
  [MTD] Fix mtdoops.c compilation
  [MTD] [NOR] fix startup lock when using multiple nor flash chips
  [MTD] [DOC200x] eccbuf is statically defined and always evaluate to true
  [MTD] Fix maps/physmap.c compilation with CONFIG_PM
  [MTD] onenand: Add panic_write function to the onenand driver
  [MTD] mtdoops: Use the panic_write function when present
  [MTD] Add mtd panic_write function pointer
  [MTD] [NAND] Freescale enhanced Local Bus Controller FCM NAND support.
  [MTD] physmap.c: Add support for multiple resources
  [MTD] [NAND] Fix misparenthesization introduced by commit 78b65179...
  [MTD] [NAND] Fix Blackfin NFC ECC calculating bug with page size 512 bytes
  [MTD] [NAND] Remove wrong operation in PM function of the BF54x NFC driver
  [MTD] [NAND] Remove unused variable in plat_nand_remove
  [MTD] Unlocking all Intel flash that is locked on power up.
  [MTD] [NAND] at91_nand: Make mtdparts option can override board info
  [MTD] mtdoops: Various minor cleanups
  [MTD] mtdoops: Ensure sequential write to the buffer
  [MTD] mtdoops: Perform write operations in a workqueue
  [MTD] mtdoops: Add further error return code checking
  [MTD] [NOR] Test devtype, not definition in flash_probe(), drivers/mtd/devices/lart.c
  ...

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (112 commits)
  ACPI: fix build warning
  Revert "cpuidle: build fix for non-x86"
  ACPI: update intrd DSDT override console messages
  ACPI: update DSDT override documentation
  ACPI: Add "acpi_no_initrd_override" kernel parameter
  ACPI: its a directory not a folder....
  ACPI: misc cleanups
  ACPI: add missing prink prefix strings
  ACPI: cleanup acpi.h
  ACPICA: fix CONFIG_ACPI_DEBUG_FUNC_TRACE build
  ACPI: video: Ignore ACPI video devices that aren't present in hardware
  ACPI: video: reset brightness on resume
  ACPI: video: call ACPI notifier chain for ACPI video notifications
  ACPI: create notifier chain to get hotkey events to graphics driver
  ACPI: video: delete unused display switch on hotkey event code
  ACPI: video: create "brightness_switch_enabled" modparam
  cpuidle: Add a poll_idle method
  ACPI: cpuidle: Support C1 idle time accounting
  ACPI: enable MWAIT for C1 idle
  ACPI: idle: Fix acpi_safe_halt usages and interrupt enabling/disabling
  ...

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  backlight: Add OMAP1 PWL backlight driver
  backlight: Avoid unecessary driver callbacks

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: Add HP Jornada 6xx driver
  leds: Remove the now uneeded ixp4xx driver
  leds: Add power LED to the wrap driver
  leds: Fix led-gpio active_low default brightness
  leds: hw acceleration for Clevo mail LED driver
  leds: Add support for hardware accelerated LED flashing
  leds: Standardise LED naming scheme
  leds: Add clevo notebook LED driver

The recently introduced page walker (walk_page_range()) calls pgd_offset with a
const struct mm_struct pointer, causing the following compile warning on m68k:

    mm/pagewalk.c:111: warning: passing argument 1 of 'pgd_offset' discards qualifiers from pointer target type

Make the `mm' parameter of the inline function pgd_offset() const to shut it
up.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (22 commits)
  drm: add initial r500 drm support
  radeon: setup the ring buffer fetcher to be less agressive.
  drm: fixup some of the ioctl function exit paths
  drm: the drm really should call pci_set_master..
  i915: Add chipset id for Intel Integrated Graphics Device
  drm: cleanup DRM_DEBUG() parameters
  drm/i915: add support for E7221 chipset
  drm: don't cast a pointer to pointer of list_head
  mga_dma: return 'err' not just zero from mga_do_cleanup_dma()
  drm: add _DRM_DRIVER flag, and re-order unload.
  drm: enable udev node creation
  drm: Make DRM_IOCTL_GET_CLIENT return EINVAL when it can't find client #idx.
  drm: move drm_mem_init to proper place in startup sequence
  drm: call driver load function after initialising AGP
  drm: Fix ioc32 compat layer
  drm: fd.o bug #11895: Only add the AGP base to map offset if the caller didn't.
  i915: add suspend/resume support
  drm: update DRM sysfs support
  drm: Initialize the AGP structure's base address at init rather than enable.
  drm: move two function extern into the correct block
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Add missing printk levels to e_powersaver
  [CPUFREQ] Fix sparse warning in powernow-k8
  [CPUFREQ] Support Model D parts and newer in e_powersaver
  [CPUFREQ] Powernow-k8: Update to support the latest Turion processors
  [CPUFREQ] fix configuration help message
  [CPUFREQ] powernow-k8 print pstate instead of fid/did for family 10h
  [CPUFREQ] Eliminate cpufreq_userspace scaling_setspeed deadlock
  [CPUFREQ] gx-suspmod.c: use boot_cpu_data instead of current_cpu_data
  [CPUFREQ] fix incorrect comment on show_available_freqs() in freq_table.c
  [CPUFREQ] drivers/cpufreq: Add missing "space"
  [CPUFREQ] arch/x86: Add missing "space"
  [CPUFREQ] Remove pointless Kconfig dependancy

* 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (69 commits)
  [POWERPC] Add SPE registers to core dumps
  [POWERPC] Use regset code for compat PTRACE_*REGS* calls
  [POWERPC] Use generic compat_sys_ptrace
  [POWERPC] Use generic compat_ptrace_request
  [POWERPC] Use generic ptrace peekdata/pokedata
  [POWERPC] Use regset code for PTRACE_*REGS* requests
  [POWERPC] Switch to generic compat_binfmt_elf code
  [POWERPC] Switch to using user_regset-based core dumps
  [POWERPC] Add user_regset compat support
  [POWERPC] Add user_regset_view definitions
  [POWERPC] Use user_regset accessors for GPRs
  [POWERPC] ptrace accessors for special regs MSR and TRAP
  [POWERPC] Use user_regset accessors for SPE regs
  [POWERPC] Use user_regset accessors for altivec regs
  [POWERPC] Use user_regset accessors for FP regs
  [POWERPC] mpc52xx: fix compile error introduce when rebasing patch
  [POWERPC] 4xx: PCIe indirect DCR spinlock fix.
  [POWERPC] Add missing native dcr dcr_ind_lock spinlock
  [POWERPC] 4xx: Fix offset value on Warp board
  [POWERPC] 4xx: Add 440EPx Sequoia ehci dts entry
  ...

Add new card (0x1393:0x1143) support added in 1.11 original driver, also
allow rate change in set_serial_info ioctl (as per 1.11 too).
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

(Old) mxser is obsoleted by mxser_new and scheduled for removal on Dec 2007.
Remove it by renaming mxser_new to mxser.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

- remove dead MOXA_GET_CONF (always returned -ENXIO)
- remove useless MOXA_GET_CUMAJOR (unused)
- use get/put_user instead of copy_from/to_user for simple types
- cleanup TIOCMIWAIT -- return -ERESTARTSYS on signal, move condition into
  separate function
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Initialize temp structure directly with proper values without first zeroing
it and setting later as suggested by Jan.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jan Engelhardt <jengelh@computergmbh.de>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Reorder fields to save some memory and code on 64bit due to alignment as
suggested by Jan.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jan Engelhardt <jengelh@computergmbh.de>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Don't test a pointer against 0. Use NULL instead.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Let the special baudrate processing on the tty layer.  Also remove
set/get_special_rate ioctls introduced in commit
f64c84a1, since it is no longer needed.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Reviewed-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Both of them may be called directly from the code, don't add special code
and variables and schedule a work for them.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

- Cy_EVENT_OPEN_WAKEUP is simple wake_up
- Cy_EVENT_HANGUP is wake_up + tty_hangup, which schedules its own work
- Cy_EVENT_WRITE_WAKEUP is tty_wakeup which may be called directly too
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

- tty_hangup schedules a bottomhalf itself, tty_wakeup doesn't need it
- call the CD code (part of work handler previously) directly from the code
  (it wakes somebody up or calls tty_hangup at worse)
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>