- 19 Jan, 2006 40 commits
-
-
Christoph Hellwig authored
find_exported_dentry contains two duplicate loops to find an alias that the acceptable callback likes. Split this out to a new helper and switch from list_for_each to list_for_each_entry to make it more readable. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
David Shaw authored
A recent patch which checked the return status of vfs_getattr in nfsd, completely missed the nfsproc.c (NFSv2) part. Here is it. This patch moved the call to vfs_getattr from the xdr encoding (at which point it is too late to return an error) to the call handling. This means several calls to vfs_getattr are needed in nfsproc.c. Many are encapsulated in nfsd_return_attrs and nfsd_return_dirop. Signed-off-by:
-
NeilBrown authored
nfsd_sync* return an errno, which usually needs to be converted to an errno, sometimes immediately, sometimes a little later. Also, nfsd_setattr returns an nfserr which SHOULDN'T be converted from an errno (because it isn't one). Also some tidyups of the form: err = XX err = nfserrno(err) and err = XX if (err) err = nfserrno(err) become err = nfserrno(XX) Signed-off-by: -
Al Viro authored
missing nfserrno() in default case of a switch by return value of posix_lock_file(); as the result we send negative host-endian to clients that expect positive network-endian, preferably mentioned in RFC... BTW, that case is not impossible - posix_lock_file() can return -ENOLCK and we do not handle that one explicitly. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
->rp_status is network-endian and nobody byteswaps it before sending to client; putting NFSERR_SERVERFAULT instead of nfserr_serverfault in there is not nice... Signed-off-by:
-
Al Viro authored
-EINVAL (in host order, no less) is not a good thing to return to client. nfsd4_truncate() returns it in one case and its callers expect nfs_.... from it. AFAICS, it should be nfserr_inval Signed-off-by:
-
Al Viro authored
Several failure exits return -E<something> instead of nfserr_<something> and vice versa. Signed-off-by:
-
Fred Isaman authored
Clean up some unnecessary special-casing in the setattr code.. Signed-off-by:
Fred Isaman <iisaman@citi.umich.edu> Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by:
-
Fred Isaman authored
Fix bug in rdattr_error return which causes correct error code to be overwritten by nfserr_toosmall. Signed-off-by:
-
J. Bruce Fields authored
Bad bookkeeping of the share reservations when handling open upgrades was causing open downgrade to fail. Signed-off-by:
-
J. Bruce Fields authored
In an earlier patch (commit b648330a) I noted that a too-early grace-period check was preventing us from bumping the sequence id on open. Unfortunately in that patch I stupidly moved the grace-period check back too far, so now an open for create can succesfully create the file while still returning ERR_GRACE. The correct place for that check is after we've set the open_owner and handled any replays, but before we actually start mucking with the filesystem. Thanks to Avishay Traeger for reporting the bug. Signed-off-by:
-
J. Bruce Fields authored
nfsd4_process_open1 is very highly nested; flatten it out a bit. Also, the preceding comment, which just outlines the logic, seems redundant. Signed-off-by:
-
J. Bruce Fields authored
Remove some goto's that made the logic here a little more tortuous than necessary. Signed-off-by:
-
J. Bruce Fields authored
We shouldn't check for replays until after checking whether the open owner is confirmed. Clients are allowed to reuse openowners without bumping the seqid. Signed-off-by:
-
J. Bruce Fields authored
We need to make sure open reclaims are marked confirmed immediately so that we can handle replays even if they fail (e.g. with a seqid-incrementing error). (See 8.1.8.) Signed-off-by:
-
J. Bruce Fields authored
Make sure we get a directory when we look up the recovery directory. Thanks to Christoph Hellwig for the bug report. Based on feedback from Christoph and others, we may remove the need for this lookup and just pass in a file descriptor from userspace instead, and/or completely move the directory handling to userspace. For now we're just fixing the obvious bugs. Signed-off-by:
-
J. Bruce Fields authored
We should be opening this directory RDONLY, not RDWR. Thanks to Christoph Hellwig for the bug report. Signed-off-by:
-
J. Bruce Fields authored
Allow mechanisms to return more varied errors on the context creation downcall. Signed-off-by:
-
Kevin Coffman authored
We require the server's gssd to create a completed context before asking the kernel to send a final context init reply. However, gssd could be buggy, or under some bizarre circumstances we might purge the context from our cache before we get the chance to use it here. Handle this case by returning GSS_S_NO_CONTEXT to the client. Also move the relevant code here to a separate function rather than nesting excessively. Signed-off-by:
-
Andy Adamson authored
Kerberos context initiation is handled in a single round trip, but other mechanisms (including spkm3) may require more, so we need to handle the GSS_S_CONTINUE case in svcauth_gss_accept. Send a null verifier. Signed-off-by:
Andy Adamson <andros@citi.umich.edu> Signed-off-by:
-
J. Bruce Fields authored
Simple, useful debugging printk: print the number of each op as we process it. Signed-off-by:
-
J. Bruce Fields authored
Fix some bad logic. Signed-off-by:
-
J. Bruce Fields authored
It's confusing having both release_stateowner() and release_state_owner(). And as it turns out, release_state_owner() is short and only called from one place; so just remove it. Also note the confirmed check is superfluous there--preprocess_seqid_op already check this. And remove a redundant comment and a superfluous line assignment while we're at it. Signed-off-by:
-
J. Bruce Fields authored
One of the things that's confusing about nfsd4_lock is that the lk_stateowner field could be set to either of two different lockowners: the open owner or the lock owner. Rename to lk_replay_owner and add a comment to make it clear that it's used for whichever stateowner has its sequence id bumped for replay detection. Signed-off-by:
-
J. Bruce Fields authored
release_state_owner also puts the lock owner on the close_lru. There's no need for that, though; replays of the failed lock would be handled by the openowner not the lockowner. Also consolidate the cleanup a bit, fixing leaks that can happen if errors occur between the time a new lock owner is allocated and the lock is done. Remove a comment and dprintk that look a little redundant. Signed-off-by:
-
Andy Adamson authored
Logic fixes for LOCK and UNLOCK. - Move the permission check on the current file handle outside of nfs4_lock_state() - remove the file manager fl_release_private calls; fl_ops is not set. Signed-off-by:
-
J. Bruce Fields authored
The server code currently keeps track of the destination address on every request so that it can reply using the same address. However we forget to do that in the case of a deferred request. Remedy this oversight. >From folks at PolyServe. Signed-off-by:
-
NeilBrown authored
These are both called from two places close together. I could rearrange that code so there is only one call site, but just removing the 'inline' is probably best. Signed-off-by:
-
YAMAMOTO Takashi authored
Change nfsd_sync_dir to return an error if ->sync fails, and pass that error up through the stack. This involves a number of rearrangements of error paths, and care to distinguish between Linux -errno numbers and NFSERR numbers. In the 'create' routines, we continue with the 'setattr' even if a previous sync_dir failed. This patch is quite different from Takashi's in a few ways, but there is still a strong lineage. Signed-off-by:
-
Roman Zippel authored
Set the correct type and creator for symlinks. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Roman Zippel authored
HFS+ also requires the correct creation date so recent version of OS X recognize it as link. Improve link handling: - if something is wrong with the link, ignore the link attribute and treat it as regular file (this also fixes a missing unlock during lookup). - check for incorrect link counts during unlink. Signed-off-by:
-
Roman Zippel authored
Read the correct ctime from disk (it was written but never read for some reason). Read also creation date, which is used in the next patch. (Problem found by Olivier Castan <olivier.castan@certa.ssi.gouv.fr>) Signed-off-by:
-
David Elliott authored
Add support for HFSX, which allows for case-sensitive filenames. Signed-off-by:
-
Roman Zippel authored
Add the log level and a "hfs: " prefix to all kernel prints. Signed-off-by:
-
Roman Zippel authored
Add the log level and a "hfs: " prefix to all kernel prints. (HFS and HFS+ will use the same prefix, as they share some code and could be merged at some point.) Signed-off-by:
-
Arnd Bergmann authored
All standard system calls should be declared in include/linux/syscalls.h. Add some of the new additions that were previously missed. Signed-off-by:
Arnd Bergmann <arndb@de.ibm.com> Signed-off-by:
-
Jason Baron authored
Currently, a negative policy argument passed into the 'sys_sched_setscheduler()' system call, will return with success. However, the manpage for 'sys_sched_setscheduler' says: EINVAL The scheduling policy is not one of the recognized policies, or the parameter p does not make sense for the policy. Signed-off-by:Jason Baron <jbaron@redhat.com> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Eric Van Hensbergen authored
v9fs mmap support was originally removed from v9fs at Al Viro's request, but recently there have been requests from folks who want readpage functionality (primarily to enable execution of files mounted via 9P). This patch adds readpage support (but not writepage which contained most of the objectionable code). It passes fsx-linux (and other regressions) so it should be relatively safe. Signed-off-by:
Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Correct a bit of whitespace problems while working here. Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
When the user specifies both a COW file and its backing file, if the previous backing file is not found, currently UML tries again to use it and fails. This can be corrected by changing same_backing_files() return value in that case, so that the caller will try to change the COW file to point to the new location, as already done in other cases. Additionally, given the change in the meaning of the func, change its name, invert its return value, so all values are inverted except when stat(from_cow,&buf2) fails. And add some comments and two minor bugfixes - remove a fd leak (return err rather than goto out) and a repeated check. Tested well. Signed-off-by:
-
