- 30 Nov, 2009 2 commits
-
-
Petr Štetiar authored
This patch adds support for the ET&T TC5UH 5-wire USB touchscreen controller. More info at http://www.etandt.com.tw/board_solution.htmlSigned-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Nicolas Léveillé authored
Added two new Xbox 360 devices: - HORI Real Arcade Pro.EX - Mad Catz SFIV Fightpad Signed-off-by: Nicolas Léveillé <nicolas@uucidl.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 23 Nov, 2009 9 commits
-
-
Samu Onkalo authored
If the poll interval is set to 0 via new sysfs entry and device is opened after that, polling is started with interval 0. This causes huge CPU load. Same happens if the rate was 0 when the device was closed and then reopened. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
It does not make sense to wait poll_interval before performing first read after opening the device, schedule the read immediately instead. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Arnaud Patard authored
S3C24XX touchscreen driver, originally written by Arnaud Patard and other contributors. The driver has had substantial testing as well as a number of tidying up passes done by Ben Dooks, as noted: - added kernel-doc comments to most of the routines - removed old code from pre adc framework days - updated device probe code to use platform id list matching - cleaned up debug, since printk() now has timestamp feature - ensure code uses dev_() reporting macros where necessary - remove ABS_PRESSURE reporting, tslib can be fixed - ensure timer is removed on driver exit - move to using dev_pmops for power management Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Daniel Silverstone authored
Zytronic USB-attached capacitive touchscreen support within the generic USB touchscreen driver. Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk> Signed-off-by: Vincent Sanders <vince@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Roger Quadros authored
Function name is input_ff_destroy() and not input_ff_free() Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Márton Németh authored
Use strlcat() to append a string to the previously created first part. Signed-off-by: Márton Németh <nm127@freemail.hu> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Pavel Machek authored
Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Pavel Machek authored
On Zaurus, hx4700 and others pressure is reported inverted -- the lighter the pressure, the bigger numerical value. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Oliver Neukum authored
usb_kill_urb() in disconnect is not needed as unregistering will cause close() to be called. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 20 Nov, 2009 16 commits
-
-
Nicolas Ferre authored
New at91sam9g45ekes board provides a LCD with resistive touchscreen. This is the support of this feature by atmel_tsadcc driver. This also sets up platform parameters to be passed to the driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Nicolas Ferre authored
Setup platform parameters in at91sam9rl-ek board to be passed to atmel_tsadcc touchscreen. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Nicolas Ferre authored
Add a number of plafrom dependent parameters to atmel_tsadcc. The touchscreeen driver can now take into account the slight differences that exist between IPs included in diferent products. This will also allow to adapt its behaivior to the caracteristics of the resistive panel used. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Nicolas Ferre authored
Tiny patch for setting capabilities using input API function. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Alan Jenkins authored
A VT switch can theoretically change fg_console between vc = vc_cons[fg_console].d and kbd = kbd_table + fg_console Fix it by replacing the second fg_console with vc->vc_num. Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Maxim Levitsky authored
The touchpad on Acer Aspire 5720, 5520 and some other Aspire models (signature 0x73, 0x02, 0x50) has a button that can be rocked in 4 different directions. Make the driver to generate BTN_0..BTN_3 events in response. The Synaptics driver by default maps BTN_0 and BTN_1 to up and down, so there should be no visible changes with the old setup that generated BTN_FORWARD and BTN_BACK (also mapped to up and down). Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
Do not start protocol detection assuming that middle mouse is present, instead let individual protocols explicitly set this capability. This fixes issue with Synaptics touchpads pretending that they have middle button when hardware clearly reports otherwise. Reported-and-tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
The main input device of Lifebook touchscreens does not generate left/right/middle button events and therefore should not be advertising them in its capabilities. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
Elantech touchpads work in absolute mode and do not generate relative events so they should not be advertising them. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
Touchkit PS/2 touchscreen does not have left/right/middle buttons and should not be advertising as capable of generating these events. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
Make sure that polled input device and matrix keypad APIs are included with the rest of input API when generating kernel documentation. Also description of absres was missing as well. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Samu Onkalo authored
Sysfs entry for reading and setting of the polling interval. If the interval is set to 0, polling is stopped. Polling is restarted when interval is changed to non-zero. sysfs entries: poll = current polling interval in msec (RW) max = max allowed polling interval (RO) min = min allowed polling interval (RO) Minimum and maximum limit for interval can be set while setting up the device. Interval can be adjusted even if the input device is not currently open. [dtor@mail.ru: add kernel doc markup for the new fields] Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Ben Dooks authored
Move the code that deals with setting up each individual button out into a new function to reduce the indentation and allow us to common up some of the error recovery code. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Ben Dooks authored
The gpio keys driver should be using <linux/gpio.h> instead of <asm/gpio.h> Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Ben Dooks authored
The gpio_keys driver is binding to a platform device but using pr_err() to report errors. Change to using dev_err() so that all messages are prefixed by the device name. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Simtec Linux Team <linux@simtec.co.uk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Marek Vasut authored
This patch allows UCB1400 to get IRQ GPIO from platform data. In case platform_data are not supplied or the IRQ supplied in the platform_data is negative, fall back to the old IRQ detection algorithm. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
- 06 Nov, 2009 2 commits
-
-
Jani Nikula authored
Add new codes for camera focus key, and camera lens cover, keypad slide, front proximity switches. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Dmitry Torokhov authored
-
- 03 Nov, 2009 11 commits
-
-
Linus Torvalds authored
-
git://github.com/at91linux/linux-2.6-at91Linus Torvalds authored
* 'for-linus' of git://github.com/at91linux/linux-2.6-at91: at91: at91sam9g45 family: identify several chip versions avr32: add two new at91 to cpu.h definition
-
Nicolas Ferre authored
cpu_is_xxx() macros are identifying generic at91sam9g45 chip. This patch adds the capacity to differentiate Engineering Samples and final lots through the inclusion of at91_cpu_fully_identify() and the related chip IDs with chip version field preserved. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-
Nicolas Ferre authored
Somme common drivers will need those at91 cpu_is_xxx() definitions. As at91sam9g10 and at91sam9g45 are on the way to linus' tree, here is the patch that adds those chips to cpu.h in AVR32 architecture. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (38 commits) MIPS: O32: Fix ppoll MIPS: Oprofile: Rename cpu_type from godson2 to loongson2 MIPS: Alchemy: Fix hang with high-frequency edge interrupts MIPS: TXx9: Fix spi-baseclk value MIPS: bcm63xx: Set the correct BCM3302 CPU name MIPS: Loongson 2: Set cpu_has_dc_aliases and cpu_icache_snoops_remote_store MIPS: Avoid potential hazard on Context register MIPS: Octeon: Use lockless interrupt controller operations when possible. MIPS: Octeon: Use write_{un,}lock_irq{restore,save} to set irq affinity MIPS: Set S-cache linesize to 64-bytes for MTI's S-cache MIPS: SMTC: Avoid queing multiple reschedule IPIs MIPS: GCMP: Avoid accessing registers when they are not present MIPS: GIC: Random fixes and enhancements. MIPS: CMP: Fix memory barriers for correct operation of amon_cpu_start MIPS: Fix abs.[sd] and neg.[sd] emulation for NaN operands MIPS: SPRAM: Clean up support code a little MIPS: 1004K: Enable SPRAM support. MIPS: Malta: Enable PCI 2.1 compatibility in PIIX4 MIPS: Kconfig: Fix duplicate default value for MIPS_L1_CACHE_SHIFT. MIPS: MTI: Fix accesses to device registers on MIPS boards ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6Linus Torvalds authored
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Remove some debug messages producing too much noise PM: Fix warning on suspend errors PM / Hibernate: Add newline to load_image() fail path PM / Hibernate: Fix error handling in save_image() PM / Hibernate: Fix blkdev refleaks PM / yenta: Split resume into early and late parts (rev. 4)
-
Ian Campbell authored
nr_processes() returns the sum of the per cpu counter process_counts for all online CPUs. This counter is incremented for the current CPU on fork() and decremented for the current CPU on exit(). Since a process does not necessarily fork and exit on the same CPU the process_count for an individual CPU can be either positive or negative and effectively has no meaning in isolation. Therefore calculating the sum of process_counts over only the online CPUs omits the processes which were started or stopped on any CPU which has since been unplugged. Only the sum of process_counts across all possible CPUs has meaning. The only caller of nr_processes() is proc_root_getattr() which calculates the number of links to /proc as stat->nlink = proc_root.nlink + nr_processes(); You don't have to be all that unlucky for the nr_processes() to return a negative value leading to a negative number of links (or rather, an apparently enormous number of links). If this happens then you can get failures where things like "ls /proc" start to fail because they got an -EOVERFLOW from some stat() call. Example with some debugging inserted to show what goes on: # ps haux|wc -l nr_processes: CPU0: 90 nr_processes: CPU1: 1030 nr_processes: CPU2: -900 nr_processes: CPU3: -136 nr_processes: TOTAL: 84 proc_root_getattr. nlink 12 + nr_processes() 84 = 96 84 # echo 0 >/sys/devices/system/cpu/cpu1/online # ps haux|wc -l nr_processes: CPU0: 85 nr_processes: CPU2: -901 nr_processes: CPU3: -137 nr_processes: TOTAL: -953 proc_root_getattr. nlink 12 + nr_processes() -953 = -941 75 # stat /proc/ nr_processes: CPU0: 84 nr_processes: CPU2: -901 nr_processes: CPU3: -137 nr_processes: TOTAL: -954 proc_root_getattr. nlink 12 + nr_processes() -954 = -942 File: `/proc/' Size: 0 Blocks: 0 IO Block: 1024 directory Device: 3h/3d Inode: 1 Links: 4294966354 Access: (0555/dr-xr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2009-11-03 09:06:55.000000000 +0000 Modify: 2009-11-03 09:06:55.000000000 +0000 Change: 2009-11-03 09:06:55.000000000 +0000 I'm not 100% convinced that the per_cpu regions remain valid for offline CPUs, although my testing suggests that they do. If not then I think the correct solution would be to aggregate the process_count for a given CPU into a global base value in cpu_down(). This bug appears to pre-date the transition to git and it looks like it may even have been present in linux-2.6.0-test7-bk3 since it looks like the code Rusty patched in http://lwn.net/Articles/64773/ was already wrong. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: gpio-keys - use IRQF_SHARED Input: winbond-cir - select LEDS_TRIGGERS Input: i8042 - try to get stable CTR value when initializing Input: atkbd - add a quirk for OQO 01+ multimedia keys
-
git://git.fluff.org/bjdooks/linuxLinus Torvalds authored
* 'fixes-s3c-2632-rc5' of git://git.fluff.org/bjdooks/linux: ARM: S3C2410: Fix sparse warnings in arch/arm/mach-s3c2410/gpio.c ARM: S3C2440: mini2440: Fix spare warnings ARM: S3C24XX: Fix warnings in arch/arm/plat-s3c24xx/gpio.c ARM: S3C2440: mini2440: Fix missing CONFIG_S3C_DEV_USB_HOST ARM: S3C24XX: arch/arm/plat-s3c24xx: Move dereference after NULL test ARM: S3C: Fix adc function exports ARM: S3C2410: Fix link if CONFIG_S3C2410_IOTIMING is not set ARM: S3C24XX: Introduce S3C2442B CPU ARM: S3C24XX: Define a macro to avoid compilation error ARM: S3C: Add info for supporting circular DMA buffers ARM: S3C64XX: Set rate of crystal mux ARM: S3C64XX: Fix S3C64XX_CLKDIV0_ARM_MASK value
-
git://git.fluff.org/bjdooks/linuxLinus Torvalds authored
* 'i2c-fixes' of git://git.fluff.org/bjdooks/linux: i2c-mpc: Do not generate STOP after read. i2c: imx: disable clock when it's possible to save power. i2c: imx: only imx1 needs disable delay i2c: imx: check busy bit when START/STOP
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: add zero-fill for new btree node buffers nilfs2: fix irregular checkpoint creation due to data flush nilfs2: fix dirty page accounting leak causing hang at write
-