- 24 Sep, 2009 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6Linus Torvalds authored
* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (21 commits) HWPOISON: Enable error_remove_page on btrfs HWPOISON: Add simple debugfs interface to inject hwpoison on arbitary PFNs HWPOISON: Add madvise() based injector for hardware poisoned pages v4 HWPOISON: Enable error_remove_page for NFS HWPOISON: Enable .remove_error_page for migration aware file systems HWPOISON: The high level memory error handler in the VM v7 HWPOISON: Add PR_MCE_KILL prctl to control early kill behaviour per process HWPOISON: shmem: call set_page_dirty() with locked page HWPOISON: Define a new error_remove_page address space op for async truncation HWPOISON: Add invalidate_inode_page HWPOISON: Refactor truncate to allow direct truncating of page v2 HWPOISON: check and isolate corrupted free pages v2 HWPOISON: Handle hardware poisoned pages in try_to_unmap HWPOISON: Use bitmask/action code for try_to_unmap behaviour HWPOISON: x86: Add VM_FAULT_HWPOISON handling to x86 page fault handler v2 HWPOISON: Add poison check to page fault handling HWPOISON: Add basic support for poisoned pages in fault handler v3 HWPOISON: Add new SIGBUS error codes for hardware poison signals HWPOISON: Add support for poison swap entries v2 HWPOISON: Export some rmap vma locking to outside world ...
-
Andrew Morton authored
drivers/usb/serial/sierra.c: In function 'sierra_suspend': drivers/usb/serial/sierra.c:936: error: 'struct usb_device' has no member named 'auto_pm' Repairs commit e6929a90 Author: Oliver Neukum <oliver@neukum.org> Date: Fri Sep 4 23:19:53 2009 +0200 USB: support for autosuspend in sierra while online Cc: Greg KH <greg@kroah.com> Cc: Oliver Neukum <oliver@neukum.org> Cc: Elina Pasheva <epasheva@sierrawireless.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ivan Kokshaysky authored
This brings Alpha AGP platforms in sync with the change to struct agp_memory (unsigned long *memory => struct page **pages). Only compile tested (I don't have titan/marvel hardware), but this change looks pretty straightforward, so hopefully it's ok. Signed-off-by:
Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Dave Airlie <airlied@linux.ie> Cc: <stable@kernel.org> Signed-off-by:
-
Hiroshi Shimamoto authored
Because the binfmt is not different between threads in the same process, it can be moved from task_struct to mm_struct. And binfmt moudle is handled per mm_struct instead of task_struct. Signed-off-by:
Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Acked-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
Albin Tonnerre authored
When unaligned accesses are required for uncompressing a kernel (such as for LZO decompression on ARM in a patch that follows), including <linux/kernel.h> causes issues as it brings in a lot of things that are not available in the decompression environment. linux/kernel.h brings at least: extern int console_printk[]; extern const char hex_asc[]; which causes errors at link-time as they are not available when compiling the pre-boot environement. There are also a few others: arch/arm/boot/compressed/misc.o: In function `valid_user_regs': arch/arm/include/asm/ptrace.h:158: undefined reference to `elf_hwcap' arch/arm/boot/compressed/misc.o: In function `console_silent': include/linux/kernel.h:292: undefined reference to `console_printk' arch/arm/boot/compressed/misc.o: In function `console_verbose': include/linux/kernel.h:297: undefined reference to `console_printk' arch/arm/boot/compressed/misc.o: In function `pack_hex_byte': include/linux/kernel.h:360: undefined reference to `hex_asc' arch/arm/boot/compressed/misc.o: In function `hweight_long': include/linux/bitops.h:45: undefined reference to `hweight32' arch/arm/boot/compressed/misc.o: In function `__cmpxchg_local_generic': include/asm-generic/cmpxchg-local.h:21: undefined reference to `wrong_size_cmpxchg' include/asm-generic/cmpxchg-local.h:42: undefined reference to `wrong_size_cmpxchg' arch/arm/boot/compressed/misc.o: In function `__xchg': arch/arm/include/asm/system.h:309: undefined reference to `__bad_xchg' However, those files apparently use nothing from <linux/kernel.h>, all they need is the declaration of types such as u32 or u64, so <linux/types.h> should be enough Signed-off-by:
Albin Tonnerre <albin.tonnerre@free-electrons.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Phillip Lougher <phillip@lougher.demon.co.uk> Signed-off-by:
-
Phillip Lougher authored
If the lzma/gzip decompressors are called with insufficient input data (len > 0 & fill = NULL), they will attempt to call the fill function to obtain more data, leading to a kernel oops. Signed-off-by:
Phillip Lougher <phillip@lougher.demon.co.uk> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Julia Lawall authored
In this case, the calls to request_mem_region, ioremap, and release_mem_region all have a consistent length argument, len, but since in other files (res->end - res->start) + 1, equivalent to resource_size(res), is used for a resource-typed structure res, one could consider whether the same should be done here. The problem was found using the following semantic patch: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct resource *res; @@ - (res->end - res->start) + 1 + resource_size(res) @@ struct resource *res; @@ - res->end - res->start + BAD(resource_size(res)) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
-
Julia Lawall authored
romfs_iget returns an ERR_PTR value in an error case instead of NULL. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @match exists@ expression x, E; statement S1, S2; @@ x = romfs_iget(...) ... when != x = E ( * if (x == NULL || ...) S1 else S2 | * if (x == NULL && ...) S1 else S2 ) // </smpl> Signed-off-by:
-
Roel Kluin authored
The allocation may fail. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-by:
Jack Steiner <steiner@sgi.com> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Jack Steiner <steiner@sgi.com> Signed-off-by:
-
Alexey Dobriyan authored
->ioctx_lock and ->ioctx_list are used only under CONFIG_AIO. Signed-off-by:
-
Jiri Slaby authored
id_reg.if_mode might be unitialized when (*mrq)->error is nonzero. move dev_dbg() inside the if so that we are sure we can use id_reg values. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Cc: Alex Dubov <oakad@yahoo.com> Signed-off-by:
-
Roel Kluin authored
unsigned block cannot be less than 0. Signed-off-by:
-
Jesper Dangaard Brouer authored
Module edac_core.ko uses call_rcu() callbacks in edac_device.c, edac_mc.c and edac_pci.c. They all use a wait_for_completion() scheme, but this scheme it not 100% safe on multiple CPUs. See the _rcu_barrier() implementation which explains why extra precausion is needed. The patch adds a comment about rcu_barrier() and as a precausion calls rcu_barrier(). A maintainer needs to look at removing the wait_for_completion code. [dougthompson@xmission.com: remove the wait_for_completion code] Signed-off-by Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by:
Doug Thompson <dougthompson@xmission.com> Signed-off-by:
-
Jason Uhlenkott authored
A driver for the Intel 3200 and 3210 memory controllers. It has only had light testing so far, and currently makes no attempt to decode error addresses at anything finer than csrow granularity. Signed-off-by:
Jason Uhlenkott <juhlenko@akamai.com> Signed-off-by:
-
Julia Lawall authored
Use the function resource_size, which reduces the chance of introducing off-by-one errors in calculating the resource size. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct resource *res; @@ - (res->end - res->start) + 1 + resource_size(res) // </smpl> Signed-off-by:
-
Ira W. Snyder authored
Add support for the Freescale MPC83xx memory controller to the existing driver for the Freescale MPC85xx memory controller. The only difference between the two processors are in the CS_BNDS register parsing code, which has been changed so it will work on both processors. The L2 cache controller does not exist on the MPC83xx, but the OF subsystem will not use the driver if the device is not present in the OF device tree. I had to change the nr_pages calculation to make the math work out. I checked it on my board and did the math by hand for a 64GB 85xx using 64K pages. In both cases, nr_pages * PAGE_SIZE comes out to the correct value. Signed-off-by:
Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by:
-
Yang Shi authored
Based on Kumar's new compatible types patch, add P2020 into MPC85xx EDAC compatible lists so that EDAC can recognize P2020 meomry controller and L2 cache controller and export the relevant fields to sysfs. EDAC MPC85xx DDR3 support is needed if DDR3 memory stick is installed on a P2020DS board so that EDAC core can recognize DDR3 memory type. Signed-off-by:
Yang Shi <yang.shi@windriver.com> Acked-by:
Dave Jiang <djiang@mvista.com> Signed-off-by:
-
Mike Frysinger authored
The forward decls for some kernel types are only needed by the code behind __KERNEL__, so don't bleed these types to userspace. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Sukadev Bhattiprolu authored
CLONE_PARENT was used to implement an older threading model. For consistency with the CLONE_THREAD check in copy_pid_ns(), disable CLONE_PARENT with CLONE_NEWPID, at least until the required semantics of pid namespaces are clear. Signed-off-by:
Sukadev Bhattiprolu <sukadev@us.ibm.com> Acked-by:
Serge Hallyn <serue@us.ibm.com> Cc: Oren Laadan <orenl@cs.columbia.edu> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Sukadev Bhattiprolu authored
When global or container-init processes use CLONE_PARENT, they create a multi-rooted process tree. Besides siblings of global init remain as zombies on exit since they are not reaped by their parent (swapper). So prevent global and container-inits from creating siblings. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Acked-by:
-
Alexey Dobriyan authored
It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by:
-
Mike Frysinger authored
The on-chip OTP may be written at runtime, so enable support for it in the driver. However, since writing should really be done only on development systems, don't bend over backwards to make sure the simple software lock is per-fd -- per-device is OK. Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
-
Dimitri Sivanich authored
This driver memory maps the UV Hub RTC. Signed-off-by:
Dimitri Sivanich <sivanich@sgi.com> Signed-off-by:
-
Dan Carpenter authored
If DownLoad.ProductCode == MAX_PRODUCT, that would be a problem when we do RIOBootTable[DownLoad.ProductCode] a couple lines down. Found by smatch (http://repo.or.cz/w/smatch.git). Signed-off-by:
Dan Carpenter <error27@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Nils Carlson authored
The periodic interrupt from drivers/char/hpet.c does not work correctly, both when using the periodic capability of the hardware and while emulating the periodic interrupt (when hardware does not support periodic mode). With timers capable of periodic interrupts, the comparator field is first set with the period value followed by set of hidden accumulator, which has the side effect of overwriting the comparator value. This results in wrong periodicity for the interrupts. For, periodic interrupts to work, following steps are necessary, in that order. * Set config with Tn_VAL_SET_CNF bit * Write to hidden accumulator, the value written is the time when the first interrupt should be generated * Write compartor with period interval for subsequent interrupts (http://www.intel.com/hardwaredesign/hpetspec_1.pdf ) When emulating periodic timer with timers not capable of periodic interrupt, driver is adding the period to counter value instead of comparator value, which causes slow drift when using this emulation. Also, driver seems to add hpetp->hp_delta both while setting up periodic interrupt and while emulating periodic interrupts with timers not capable of doing periodic interrupts. This hp_delta will result in slower than expected interrupt rate and should not be used while setting the interval. Signed-off-by:
Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by:
Nils Carlson <nils.carlson@ericsson.com> Signed-off-by:
-
Roel Kluin authored
Check whether index is within bounds before grabbing the element. Signed-off-by:
-
Renzo Davoli authored
There are two useless lines in fs/char_dev.c. In register_chrdev there is a loop to change all '/' into '!' in the kernel object name. This code is useless as the same substitution is in kobject_set_name_vargs in lib/kobject.c: 228 /* ewww... some of these buggers have '/' in the name ... */ 229 while ((s = strchr(kobj->name, '/'))) 230 s[0] = '!'; kobject_set_name_vargs is called by kobject_set_name. kobject_set_name is called just above the useless loop. [hidave.darkstar@gmail.com: fix warning, remove the unused char *s] Signed-off-by:
Renzo Davoli <renzo@cs.unibo.it> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Dave Young <hidave.darkstar@gmail.com> Signed-off-by:
-
Nikanth Karthikesan authored
In read_zero, we check for access_ok() once for the count bytes. It is unnecessarily checked again in clear_user. Use __clear_user, which does not check for access_ok(). Signed-off-by:
Nikanth Karthikesan <knikanth@suse.de> Signed-off-by:
-
Mike Frysinger authored
There is a common macro now for testing mixed pointer/errno values, so use that rather than handling the casts ourself. Signed-off-by:
David McCullough <david_mccullough@securecomputing.com> Acked-by:
Greg Ungerer <gerg@uclinux.org> Cc: David Howells <dhowells@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
David Howells authored
Ignore the loader's PT_GNU_STACK when calculating the stack size, and only consider the executable's PT_GNU_STACK, assuming the executable has one. Currently the behaviour is to take the largest stack size and use that, but that means you can't reduce the stack size in the executable. The loader's stack size should probably only be used when executing the loader directly. WARNING: This patch is slightly dangerous - it may render a system inoperable if the loader's stack size is larger than that of important executables, and the system relies unknowingly on this increasing the size of the stack. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Amerigo Wang authored
Introduce a helper function elf_note_info_init() to help fill_note_info() to do initializations, also fix the potential memory leaks. [akpm@linux-foundation.org: remove NUM_NOTES] Signed-off-by:
WANG Cong <amwang@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by:
-
Roland McGrath authored
__fatal_signal_pending inlines to one instruction on x86, probably two instructions on other machines. It takes two longer x86 instructions just to call it and test its return value, not to mention the function itself. On my random x86_64 config, this saved 70 bytes of text (59 of those being __fatal_signal_pending itself). Signed-off-by:
-
Peter Zijlstra authored
In order to direct the SIGIO signal to a particular thread of a multi-threaded application we cannot, like suggested by the manpage, put a TID into the regular fcntl(F_SETOWN) call. It will still be send to the whole process of which that thread is part. Since people do want to properly direct SIGIO we introduce F_SETOWN_EX. The need to direct SIGIO comes from self-monitoring profiling such as with perf-counters. Perf-counters uses SIGIO to notify that new sample data is available. If the signal is delivered to the same task that generated the new sample it can augment that data by inspecting the task's user-space state right after it returns from the kernel. This is esp. convenient for interpreted or virtual machine driven environments. Both F_SETOWN_EX and F_GETOWN_EX take a pointer to a struct f_owner_ex as argument: struct f_owner_ex { int type; pid_t pid; }; Where type is one of F_OWNER_TID, F_OWNER_PID or F_OWNER_GID. Signed-off-by:Peter Zijlstra <a.p.zijlstra@chello.nl> Reviewed-by:
stephane eranian <eranian@googlemail.com> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Roland McGrath <roland@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Oleg Nesterov authored
group_send_sig_info()->check_kill_permission() assumes that current is the sender and uses current_cred(). This is not true in send_sigio_to_task() case. From the security pov the sender is not current, but the task which did fcntl(F_SETOWN), that is why we have sigio_perm() which uses the right creds to check. Fortunately, send_sigio() always sends either SEND_SIG_PRIV or SI_FROMKERNEL() signal, so check_kill_permission() does nothing. But still it would be tidier to avoid this bogus security check and save a couple of cycles. Signed-off-by:
-
Oleg Nesterov authored
Introduce do_send_sig_info() and convert group_send_sig_info(), send_sig_info(), do_send_specific() to use this helper. Hopefully it will have more users soon, it allows to specify specific/group behaviour via "bool group" argument. Shaves 80 bytes from .text. Signed-off-by:
-
Oleg Nesterov authored
sys_delete_module() can set MODULE_STATE_GOING after search_binary_handler() does try_module_get(). In this case set_binfmt()->try_module_get() fails but since none of the callers check the returned error, the task will run with the wrong old ->binfmt. The proper fix should change all ->load_binary() methods, but we can rely on fact that the caller must hold a reference to binfmt->module and use __module_get() which never fails. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Cc: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Cc: Roland McGrath <roland@redhat.com> Signed-off-by:
-
Neil Horman authored
Allow core_pattern pipes to wait for user space to complete One of the things that user space processes like to do is look at metadata for a crashing process in their /proc/<pid> directory. this is racy however, since do_coredump in the kernel doesn't wait for the user space process to complete before it reaps the crashing process. This patch corrects that. Allowing the kernel to wait for the user space process to complete before cleaning up the crashing process. This is a bit tricky to do for a few reasons: 1) The user space process isn't our child, so we can't sys_wait4 on it 2) We need to close the pipe before waiting for the user process to complete, since the user process may rely on an EOF condition I've discussed several solutions with Oleg Nesterov off-list about this, and this is the one we've come up with. We add ourselves as a pipe reader (to prevent premature cleanup of the pipe_inode_info), and remove ourselves as a writer (to provide an EOF condition to the writer in user space), then we iterate until the user space process exits (which we detect by pipe->readers == 1, hence the > 1 check in the loop). When we exit the loop, we restore the proper reader/writer values, then we return and let filp_close in do_coredump clean up the pipe data properly. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by:
Earl Chew <earl_chew@agilent.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Andi Kleen <andi@firstfloor.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Neil Horman authored
Introduce core pipe limiting sysctl. Since we can dump cores to pipe, rather than directly to the filesystem, we create a condition in which a user can create a very high load on the system simply by running bad applications. If the pipe reader specified in core_pattern is poorly written, we can have lots of ourstandig resources and processes in the system. This sysctl introduces an ability to limit that resource consumption. core_pipe_limit defines how many in-flight dumps may be run in parallel, dumps beyond this value are skipped and a note is made in the kernel log. A special value of 0 in core_pipe_limit denotes unlimited core dumps may be handled (this is the default value). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
