- 15 Sep, 2009 37 commits
-
-
Michel Ludwig authored
Add experimental DVB frontend tuner interface to xc2028/3028 Signed-off-by:
Michel Ludwig <michel.ludwig@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Michel Ludwig authored
Add tuner reset GPIO and demodulator address fields to the tm6000_core struct. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Michel Ludwig authored
SMBus Write Byte commands followed by a read command on the same I2C address are not sent out to the chip as they wouldn't have any effect. Signed-off-by:
-
Michel Ludwig authored
Add GPIO4 reset, which is required to make DVB-T work with the Freecom stick. Add a general 5 ms pause to the "tm6000_read_write_usb" method. Signed-off-by:
-
Michel Ludwig authored
Signed-off-by:
-
Michel Ludwig authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Michel Ludwig authored
Signed-off-by:
-
Michel Ludwig authored
Signed-off-by:
-
Michel Ludwig authored
Signed-off-by:
-
Michel Ludwig authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Adds a driver for Trident TV Master tm5600/tm6000 chips. Those USB devices are usually found with a Xceive xc2028/xc3028 tuner, although the firmware seems to be modified to work with those chips on some older devices. Signed-off-by: -
Mauro Carvalho Chehab authored
The V4L and DVB API's are there for a long time. however, up to now, no efforts were done to merge them to kernel DocBook. This patch adds the current versions of the specs as an unique compendium. Signed-off-by: -
Antti Palosaari authored
And mask should be 0xff00 instead of 0xae00. Thanks to Jochen Friedrich <jochen@scram.de> for pointing this. Cc: Jochen Friedrich <jochen@scram.de> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
* define names for few values * decrease buffer len by one byte which was not used * add check for buffer overflow for sure * indentation fixes * remove useless 0 len check from memcpy It should not happen and if it happens memcpy should not do anything. Signed-off-by:
-
Antti Palosaari authored
Fix wrongly configured USB1.1 TS EP. Patch serie also increases USB URB size to reduce wakeups. USB1.1 URB size from 64 to 940 bytes USB2.0 URB size from 512 to 16356 bytes Signed-off-by:
-
Jose Alberto Reguero authored
Fix wrongly configured USB2.0 TS EP. Signed-off-by:
Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by:
-
Antti Palosaari authored
Add af9015 firmware to get_dvb_firmware script. Firmware version is 4.95.0.0. Signed-off-by:
-
Devin Heitmueller authored
Remove unused variable from when I introduced the g_std() function. This work was sponsored by EyeMagnet Limited. Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Devin Heitmueller authored
Remove redundant call to set the vinctrl register. This eliminates any ambiguity as to how the register is configured (since it is now always set in em28xx_set_outfmt). This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
We need to implement the g_std call, or else the default norm always gets returned, which breaks VBI capturing if you had changed the standard to NTSC using s_std. I had temporarily changed the default norm to NTSC so that zvbi-ntsc-cc wouldn't choke, so now that we are returning the correct value, switch it back to PAL as the default. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
Change the code so we only claim to support VBI if the underlying chipset actually has the support. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
Do not create the VBI device in cases where VBI is not supported on the target em28xx chip. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
Remove an unreferenced variable introduced during the VBI introduction. Signed-off-by:
-
Devin Heitmueller authored
The current locking infrastructure didn't support having multiple fds accessing the device (such as video and vbi). Rework the locking infrastructure, borrowing the design from cx88. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
When adding support for both video and VBI, I missed the mmap ioctl. Add the missing call. Signed-off-by:
-
Devin Heitmueller authored
Add support for raw VBI capture for the em28xx bridge, currently only for NTSC. Support for PAL capture to follow shortly (including the removal of numerous hard-coded NTSC-specific sizes for capture buffers, etc). Note that the code currently changes the default current norm from PAL to NTSC (so that zvbi-ntsc-cc works properly). The default norm really should be moved into a board-level parameter. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
Add code enabling the VBI registers for variants of the em28xx chip that support VBI, and make sure the isoc streaming code continues to work for the video component of the stream (note the video and vbi data arrive intermixed on the same isoc pipe). Note that this version just drops the actual VBI data onto the floor as opposed to processing it. The "#ifdef 0" tags are for the videobuf code that appears in the next patch in this series. We created a separate version of the isoc_copy version for parsing the version of the stream that includes VBI data. In theory, they might be able to be merged at some point in the future, but the initial goal is to ensure that we do not cause any regressions with devices that do not have VBI support. This work was sponsored by EyeMagnet Limited. Signed-off-by:
-
Devin Heitmueller authored
Properly document the video input control register, in preparation for the addition of VBI support. Note this patch makes no functional changes. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Lindent caused some compilation breakages. There were also others related to some other changes at kernel KABI. There's still one missing warning fix against 2.6.30: /home/v4l/cx25821/v4l/cx25821-alsa.c: In function 'cx25821_audio_initdev': /home/v4l/cx25821/v4l/cx25821-alsa.c:706: warning: 'snd_card_new' is deprecated (declared at include/sound/core.h:306) Signed-off-by: -
Mauro Carvalho Chehab authored
The original driver were generated with some dos editor, and used their own coding style. This patch does some automatic CodingStyle fixes, by running dos2unix and Lindent tools. More work still needs to be done for it to use upstream CodingStyle. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
/home/v4l/master/v4l/cx25821-audups11.c:99: error: implicit declaration of function 'lock_kernel' /home/v4l/master/v4l/cx25821-audups11.c:112: error: implicit declaration of function 'unlock_kernel' Signed-off-by: -
Mauro Carvalho Chehab authored
GIT_BRANCH=devel GIT_AUTHOR_DATE=1252851239 GIT_AUTHOR_NAME=Palash Bandyopadhyay GIT_AUTHOR_EMAIL=Palash.Bandyopadhyay@conexant.com Add conexant cx25821 driver release v106 of the Athena driver. Signed-off-by:
Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com> Signed-off-by:
-
Douglas Schilling Landgraf authored
Added Kworld DVD Maker 2 Thanks to C Western <l@c-m-w.me.uk> for reporting this board. Signed-off-by:
Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by:
-
- 12 Sep, 2009 3 commits
-
-
Mauro Carvalho Chehab authored
There are some extra parenthesis at the clauses, and some switch() tests for boards that don't have i2c ir. Remove those extra code. Signed-off-by: -
Mauro Carvalho Chehab authored
Currently, the logic to load ir i2c ancillary module is broken. It is associated to Hauppauge devices with IR flag on their eeprom, no matter if the device uses i2c or em28xx direct IR support. That's wrong. Instead, add a flag to the boards that use i2c IR chips and load the module only for those devices and if ir is not disabled. Signed-off-by: -
Mauro Carvalho Chehab authored
ir-kbd-i2c's ir_probe() function can be called much later (i.e. at ir-kbd-i2c module load), than the lifetime of a struct IR_i2c_init_data allocated off of the stack in cx18_i2c_new_ir() at registration time. Make sure we pass a pointer to a persistent IR_i2c_init_data object at i2c registration time. Thanks to Brian Rogers, Dustin Mitchell, Andy Walls and Jean Delvare to rise this question. Before this patch, if ir-kbd-i2c were probed after SAA7134, trash data were used. Compile tested only, but the patch is identical to em28xx one. So, it should work properly. Signed-off-by:
-
