- 14 Dec, 2009 2 commits
-
-
Eric W. Biederman authored
I received some bug reports about userspace programs having problems because after RTM_NEWLINK was received they could not immediate access files under /proc/sys/net/ because they had not been registered yet. The original problem was trivially fixed by moving the userspace notification from rtnetlink_event() to the end of register_netdevice(). When testing that change I discovered I was still getting RTM_NEWLINK events before I could access proc and I was also getting RTM_NEWLINK events after I was seeing RTM_DELLINK. Things practically guaranteed to confuse userspace. After a little more investigation these extra notifications proved to be from the new notifiers NETDEV_POST_INIT and NETDEV_UNREGISTER_BATCH hitting the default case in rtnetlink_event, and triggering unnecessary RTM_NEWLINK messages. rtnetlink_event now explicitly handles NETDEV_UNREGISTER_BATCH and NETDEV_POST_INIT to avoid sending the incorrect userspace notifications. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Now we can have a large udp hash table, udp_lib_get_port() loop should be converted to a do {} while (cond) form, or we dont enter it at all if hash table size is exactly 65536. Reported-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 12 Dec, 2009 5 commits
-
-
Ajit Khaparde authored
There are certain skews of the NIC which have multiple bits set in adapter->cap. Use & instead of == to process rx completions. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
From: Alexander Duyck <alexander.h.duyck@intel.com> This change makes it so that reset/interrupt storms can be avoided when there are mailbox issues. The new behavior is to only allow the device to trigger mailbox related resets only once every 10 seconds. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This patch changes the handling of collisions between the use of the PF/VF sides of the mailbox. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oliver Neukum authored
This patch removes a rare use of the USB power management API which won't be supported after the conversion to the new generic runtime power management framework. Functionality is not altered. Signed-off-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Conflicts: include/net/tcp.h
-
- 11 Dec, 2009 33 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds authored
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [ACPI/CPUFREQ] Introduce bios_limit per cpu cpufreq sysfs interface [CPUFREQ] make internal cpufreq_add_dev_* static [CPUFREQ] use an enum for speedstep processor identification [CPUFREQ] Document units for transition latency [CPUFREQ] Use global sysfs cpufreq structure for conservative governor tunings [CPUFREQ] Documentation: ABI: /sys/devices/system/cpu/cpu#/cpufreq/ [CPUFREQ] powernow-k6: set transition latency value so ondemand governor can be used [CPUFREQ] cpumask: don't put a cpumask on the stack in x86...cpufreq/powernow-k8.c
-
Greg Kroah-Hartman authored
The debug batman option needs to depend on the correct config option. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> [ "No means no!" - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (58 commits) tty: split the lock up a bit further tty: Move the leader test in disassociate tty: Push the bkl down a bit in the hangup code tty: Push the lock down further into the ldisc code tty: push the BKL down into the handlers a bit tty: moxa: split open lock tty: moxa: Kill the use of lock_kernel tty: moxa: Fix modem op locking tty: moxa: Kill off the throttle method tty: moxa: Locking clean up tty: moxa: rework the locking a bit tty: moxa: Use more tty_port ops tty: isicom: fix deadlock on shutdown tty: mxser: Use the new locking rules to fix setserial properly tty: mxser: use the tty_port_open method tty: isicom: sort out the board init logic tty: isicom: switch to the new tty_port_open helper tty: tty_port: Add a kref object to the tty port tty: istallion: tty port open/close methods tty: stallion: Convert to the tty_port_open/close methods ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (21 commits) ext3: PTR_ERR return of wrong pointer in setup_new_group_blocks() ext3: Fix data / filesystem corruption when write fails to copy data ext4: Support for 64-bit quota format ext3: Support for vfsv1 quota format quota: Implement quota format with 64-bit space and inode limits quota: Move definition of QFMT_OCFS2 to linux/quota.h ext2: fix comment in ext2_find_entry about return values ext3: Unify log messages in ext3 ext2: clear uptodate flag on super block I/O error ext2: Unify log messages in ext2 ext3: make "norecovery" an alias for "noload" ext3: Don't update the superblock in ext3_statfs() ext3: journal all modifications in ext3_xattr_set_handle ext2: Explicitly assign values to on-disk enum of filetypes quota: Fix WARN_ON in lookup_one_len const: struct quota_format_ops ubifs: remove manual O_SYNC handling afs: remove manual O_SYNC handling kill wait_on_page_writeback_range vfs: Implement proper O_SYNC semantics ...
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: Fix error return for fallocate() on XFS xfs: cleanup dmapi macros in the umount path xfs: remove incorrect sparse annotation for xfs_iget_cache_miss xfs: kill the STATIC_INLINE macro xfs: uninline xfs_get_extsz_hint xfs: rename xfs_attr_fetch to xfs_attr_get_int xfs: simplify xfs_buf_get / xfs_buf_read interfaces xfs: remove IO_ISAIO xfs: Wrapped journal record corruption on read at recovery xfs: cleanup data end I/O handlers xfs: use WRITE_SYNC_PLUG for synchronous writeout xfs: reset the i_iolock lock class in the reclaim path xfs: I/O completion handlers must use NOFS allocations xfs: fix mmap_sem/iolock inversion in xfs_free_eofblocks xfs: simplify inode teardown
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (235 commits) Staging: IIO: add selection of IIO_SW_RING to LIS3L02DQ as needed Staging: IIO: Add tsl2560-2 support to tsl2563 driver. Staging: IIO: Remove tsl2561 driver. Support merged with tsl2563. Staging: wlags49_h2: fix up signal levels + drivers-staging-wlags49_h2-remove-cvs-metadata.patch added to -mm tree Staging: samsung-laptop: add TODO file Staging: samsung-laptop: remove old kernel code Staging: add Samsung Laptop driver staging: batman-adv meshing protocol Staging: rtl8192u: depends on USB Staging: rtl8192u: remove dead code Staging: rtl8192u: remove bad whitespaces Staging: rtl8192u: make it compile Staging: Added Realtek rtl8192u driver to staging Staging: dream: add gpio and pmem support Staging: dream: add TODO file Staging: android: delete android drivers Staging: et131x: clean up the avail fields in the rx registers Staging: et131x: Clean up number fields Staging: et131x: kill RX_DMA_MAX_PKT_TIME ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (27 commits) Driver core: fix race in dev_driver_string Driver Core: Early platform driver buffer sysfs: sysfs_setattr remove unnecessary permission check. sysfs: Factor out sysfs_rename from sysfs_rename_dir and sysfs_move_dir sysfs: Propagate renames to the vfs on demand sysfs: Gut sysfs_addrm_start and sysfs_addrm_finish sysfs: In sysfs_chmod_file lazily propagate the mode change. sysfs: Implement sysfs_getattr & sysfs_permission sysfs: Nicely indent sysfs_symlink_inode_operations sysfs: Update s_iattr on link and unlink. sysfs: Fix locking and factor out sysfs_sd_setattr sysfs: Simplify iattr time assignments sysfs: Simplify sysfs_chmod_file semantics sysfs: Use dentry_ops instead of directly playing with the dcache sysfs: Rename sysfs_d_iput to sysfs_dentry_iput sysfs: Update sysfs_setxattr so it updates secdata under the sysfs_mutex debugfs: fix create mutex racy fops and private data Driver core: Don't remove kobjects in device_shutdown. firmware_class: make request_firmware_nowait more useful Driver-Core: devtmpfs - set root directory mode to 0755 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (122 commits) USB: mos7840: add device IDs for B&B electronics devices USB: ftdi_sio: add USB device ID's for B&B Electronics line USB: musb: musb_host: fix sparse warning USB: musb: musb_gadget: fix sparse warning USB: musb: omap2430: fix sparse warning USB: core: message: fix sparse warning USB: core: hub: fix sparse warning USB: core: fix sparse warning for static function USB: Added USB_ETH_RNDIS to use instead of CONFIG_USB_ETH_RNDIS USB: Check bandwidth when switching alt settings. USB: Refactor code to find alternate interface settings. USB: xhci: Fix command completion after a drop endpoint. USB: xhci: Make reverting an alt setting "unfailable". USB: usbtmc: Use usb_clear_halt() instead of custom code. USB: xhci: Add correct email and files to MAINTAINERS entry. USB: ehci-omap.c: introduce missing kfree USB: xhci-mem.c: introduce missing kfree USB: add remove_id sysfs attr for usb drivers USB: g_multi kconfig: fix depends and help text USB: option: add pid for ZTE ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: ohci: handle receive packets with a data length of zero
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdbLinus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kgdb: Always process the whole breakpoint list on activate or deactivate kgdb: continue and warn on signal passing from gdb kgdb,x86: do not set kgdb_single_step on x86 kgdb: allow for cpu switch when single stepping kgdb,i386: Fix corner case access to ss with NMI watch dog exception kgdb: Replace strstr() by strchr() for single-character needles kgdbts: Read buffer overflow kgdb: Read buffer overflow kgdb,x86: remove redundant test
-
Alan Cox authored
The tty count sanity check may need the BKL, that isn't clear. However it is clear that the count use of the lock is internal and independant of the bigger use of the lock. Furthermore the file list locking is also separately locked already Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
There are two call points, both want to check that tty->signal->leader is set. Move the test into disassociate_ctty() as that will make locking changes easier in a bit Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
We know that the redirect field is handled via its own locking in all places Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Start trying to untangle the remaining BKL mess Updated to fix missing unlock_kernel noted by Dan Carpenter Signed-off-by: Alan "I must be out of my tree" Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
moxa_openlock is used for several situations where we want to handle the case of an ioctl that crosses many ports (not just the open tty), and also cases where an open races a deinit (eg a pci unplug) and we hangup a port before we can cope with that. The non open race cases can use the moxa_lock spinlock. This simplifies sorting out the remaining mess. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
It isn't needed here any more Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
This is overkill and mostly not needed Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
The tty flag can be tested so the shadow flag isn't needed Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
- The open lock is needed to fix up the case of a board reset occuring during tty open but too early for a sane hangup response. - The lock can however got for other cases - Use the port mutex for get/setserial - Fix up the confused lack of locking on the THROTTLE and other bits in the private flags. Just use set/test/clear bit and it covers the cases we need Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Introduce a lock for moxafunc() to protect the cases where were get collisions between two function requests at the same time. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Rework a few bits of this into tty_port format Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Alexander Strakh <strakh@ispras.ru> reported KERNEL_VERSION: 2.6.31 DESCRIBE: Driver drivers/char/isicom.c might sleep in atomic context, because it calls tty_port_xmit_buf under spin_lock. ./drivers/char/isicom.c: 1307 static void isicom_hangup(struct tty_struct *tty) 1308 { ... 1315 spin_lock_irqsave(&port->card->card_lock, flags); 1316 isicom_shutdown_port(port); ... Path to might_sleep macro from isicom_hangup: 1. isicom_hangup calls spin_lock_irqsave (drivers/char/isicom.c:1315) and then calls isicom_shutdown_port. 2. isiscom_shutdown_port calls tty_port_free_xmit_buf at drivers/char/isicom.c:906 3. tty_port_free_xmit_buf calls mutex_lock at drivers/char/tty_port:48 Found by Linux Driver Verification Project. Reported-by: Alexander Strakh <strakh@ispras.ru> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Propogate the init/shutdown mutex through the setserial logic. Use the proper locks for the various bits still using the BKL. Kill the BKL in this driver. Updated to fix the bug noted by Dan Carpenter Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
At first this looks a fairly trivial conversion but we can't quite push everything into the right format yet. The open side is easy but care is needed over the setserial methods. Fix up the locking now that we've adopted the port->mutex locking rule for the initialization. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Split this into two flags - INIT meaning the board is set up and ACTIVE meaning the board has ports open. Remove the broken HUPCL casing and push the counts somewhere sensible. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Trivial conversion in this case so might as well do it while testing the port_open design is right Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Users of tty port need a way to refcount ports when hotplugging is involved. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Slice/dice/repeat as with the stallion driver this is just code shuffling and removal Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
The driver is already structured this way so just slice and dice Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Some devices want to set IO_ERROR in their activate methods so that you can be handed a 'dead' port for operations like setserial. Thus we need to clear the flag before activate so that activate can choose to set the flag and still return 0. This is fine as the file handle/tty are not accessible to the user yet. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
To propogate tty_port_open/close to a few other devices we need to start handling the IO_ERROR flag on the tty. We can do this pretty trivially. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-