- 06 Feb, 2008 40 commits
-
-
Mike Frysinger authored
Blackfin RTC driver: we pass in a (struct device*) to the irq handler, not a (struct platform_device*), so fix the irq handler Signed-off-by:
Mike Frysinger <michael.frysinger@analog.com> Signed-off-by:
Bryan Wu <bryan.wu@analog.com> Acked-by:
Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Frysinger authored
Blackfin RTC driver: the frequency function is in units of Hz, not units of seconds, so lock our driver down to 1 Hz Signed-off-by:
-
Andrew Sharp authored
Add RTC support for DS1511 RTC/WDT chip. Signed-off-by:
Andy Sharp <andy.sharp@onstor.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
David Brownell authored
Start making the rtc-cmos alarm act more like a oneshot alarm by disabling that alarm after its IRQ fires. (ACPI hooks are also needed.) The Linux RTC framework has previously been a bit vague in this area, but any other behavior is problematic and not very portable. RTCs with full YYYY-MM-DD HH:MM[:SS] alarms won't have a problem here. Only ones with partial match criteria, with the most visible example being the PC RTC, get confused. (Because the criteria will match repeatedly.) Update comments relating to that oneshot behavior and timezone handling. (Timezones are another issue that's mostly visible with rtc-cmos. That's because PCs often dual-boot MS-Windows, which likes its RTC to match local wall-clock time instead of UTC.) Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Paul Mundt authored
This adds a basic ds1302 RTC driver, which is basically a cleanup and move of the in-tree SH SecureEdge5410 code (which is currently located in arch/sh/board/snapgear/rtc.c) to drivers/rtc. This aims to be a building block that the M32R and CRIS code can be worked on top of, so we can get rid of drivers/char/ds1302.c and arch/cris/arch-v10/drivers/ds1302.c respectively, though more work is needed for this. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
David Brownell authored
This makes rtc-cmos export its NVRAM, like several other RTC drivers. It still works within the limits of the current CMOS_READ/CMOS_WRITE calls, which don't understand how to access multiple register banks. The primary impact of that limitation is that Linux can't access the uppermost 128 bytes of NVRAM on many systems. Note that this isn't aiming to be a drop-in replacement for the legacy /dev/nvram support. (Presumably that has real users, and isn't just getting carried forward automatically?) Userspace handles more work: - When userspace code updates NVRAM, that will need to include updating any platform-specific checksums that may apply. - No /proc/driver/nvram file will parse and display NVRAM data according to whichever boot firmware your board expects. Also minor pnp-related updates: update a comment, remove dead code. Signed-off-by:
-
Robert P. J. Day authored
Use is_power_of_2() macro for simplicity. Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
-
Jean Delvare authored
The rtc-pcf8583 driver is using the I2C_M_NOSTART flag but shouldn't. This flag is only meant for broken chips and the PCF8583 RTC chip is not one of these. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Alessandro Zummo authored
Add adds a warning if a potentially conflicting RTC option has been selected and makes some other cosmetic fixes to the Kconfig. Signed-off-by:
-
Miklos Szeredi authored
Libfuse basically creates a new thread for each new request. This is fine for synchronous requests, which are naturally limited. However background requests (especially writepage) can cause a thread creation storm. To avoid this, limit the number of background requests available to userspace. This is done by introducing another queue for background requests, and a counter for the number of "active" requests, which are currently available for userspace. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Miklos Szeredi authored
Move the fields 'dentry' and 'vfsmount' into the request specific union, since these are only used for the RELEASE request. Signed-off-by:
-
Miklos Szeredi authored
Invalidate attributes on create, since st_ctime is updated. Reported by Szabolcs Szakacsits. Signed-off-by:
-
Eric Sandeen authored
Jeff Moyer pointed out that a mount; umount loop of ecryptfs, with the same cipher & other mount options, created a new ecryptfs_key_tfm_cache item each time, and the cache could grow quite large this way. Looking at this with mhalcrow, we saw that ecryptfs_parse_options() unconditionally called ecryptfs_add_new_key_tfm(), which is what was adding these items. Refactor ecryptfs_get_tfm_and_mutex_for_cipher_name() to create a new helper function, ecryptfs_tfm_exists(), which checks for the cipher on the cached key_tfm_list, and sets a pointer to it if it exists. This can then be called from ecryptfs_parse_options(), and new key_tfm's can be added only when a cached one is not found. With list locking changes suggested by akpm. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
-
Trevor Highland authored
Only the lower byte of cipher_code is ever used, so it makes sense for its type to be u8. Signed-off-by:
Trevor Highland <trevor.highland@gmail.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Michael Halcrow authored
The printk statements that result when the user does not have the proper key available could use some refining. Signed-off-by:
Mike Halcrow <mhalcrow@us.ibm.com> Cc: Mike Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Eric Sandeen authored
ecryptfs_debug really should not be a mount option; it is not per-mount, but rather sets a global "ecryptfs_verbosity" variable which affects all mounted filesysytems. It's already settable as a module load option, I think we can leave it at that. Also, if set, since secret values come out in debug messages, kick things off with a stern warning. Signed-off-by:
-
Eric Sandeen authored
Change ecryptfs_show_options to reflect the actual mount options in use. Note that this does away with the "dir=" output, which is not a valid mount option and appears to be unused. Mount options such as "ecryptfs_verbose" and "ecryptfs_xattr_metadata" are somewhat indeterminate for a given fs, but in any case the reported mount options can be used in a new mount command to get the same behavior. [akpm@linux-foundation.org: fix printk warning] Signed-off-by:
-
Trevor Highland authored
There is no need to keep re-setting the same key for any given eCryptfs inode. This patch optimizes the use of the crypto API and helps performance a bit. Signed-off-by:
-
Michael Halcrow authored
Remove internal references to header extents; just keep track of header bytes instead. Headers can easily span multiple pages with the recent persistent file changes. Signed-off-by:
-
Adrian Bunk authored
- make the following needlessly global code static: - crypto.c:ecryptfs_lower_offset_for_extent() - crypto.c:key_tfm_list - crypto.c:key_tfm_list_mutex - inode.c:ecryptfs_getxattr() - main.c:ecryptfs_init_persistent_file() - remove the no longer used mmap.c:ecryptfs_lower_page_cache - #if 0 the unused read_write.c:ecryptfs_read() Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Andrew Morton authored
drivers/isdn/hardware/eicon/debug.c: In function 'SuperTraceASSIGN': drivers/isdn/hardware/eicon/debug.c:1191: warning: 'rx_dma_magic' may be used uninitialized in this function Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Roel Kluin authored
'!' has a higher priority than '&'. Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Tilman Schmidt authored
The ser_gigaset ISDN driver was using a mutex in its close() method for waiting for other running ldisc methods to finish. That's what completions are for. Incidentally, this also avoids a spurious "BUG: lock held at task exit time" message when the driver's userspace daemon daemonizes itself. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
Tilman Schmidt authored
Fix the initialization and reference counting of the Gigaset driver modules so that they can be unloaded when they are not actually in use. Signed-off-by:
-
Tilman Schmidt authored
Convert atomic_t variables that don't actually use atomic_t functionality to int. Signed-off-by:
-
Tilman Schmidt authored
Add basic suspend/resume support to the usb_gigaset driver for the Siemens Gigaset M105 USB DECT adapter. Only the USB aspects are handled so far; the ISDN subsystem is not notified in any way, for lack of information about how to do that. The driver does not check for active connections before suspending. They will be dropped when the device loses USB power. Signed-off-by:
-
Tilman Schmidt authored
Add basic suspend/resume support to the bas_gigaset ISDN driver for the Siemens Gigaset SX255 series of ISDN DECT bases. Only the USB aspects are handled so far; the ISDN subsystem is not notified in any way, for lack of information about how to do that. The driver will refuse to suspend if a connection is active. Signed-off-by:
-
Tilman Schmidt authored
Some cleanups to the bas-gigaset and usb-gigaset USB ISDN drivers: - simplified error handling - improved debug messages - readability improvements - removal of obsolete defines and comments Signed-off-by:
-
Tilman Schmidt authored
Make there only be one reference to urb->status per URB callback, and none outside, in preparation for removal of that field. Signed-off-by:
-
Abhishek Sagar authored
Provide support to add an optional user defined callback to be run at function entry of a kretprobe'd function. Also modify the kprobe smoke tests to include an entry-handler during the kretprobe sanity test. Signed-off-by:
Abhishek Sagar <sagar.abhishek@gmail.com> Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Acked-by:
Jim Keniston <jkenisto@us.ibm.com> Signed-off-by:
-
David Brownell authored
Remove some more references to dev->power.power_state. That field is overdue for removal, but we can't do that while it's still referenced in the kernel. The only reason to update it was to make the /sys/devices/.../power/state files (now removed) work better. Signed-off-by:
-
Mike Frysinger authored
Use simpler comment headers, and strip out information that is maintained in GIT history Signed-off-by:
-
Sonic Zhang authored
SPI writes should also not return until the last bit is sent. Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Bryan Wu authored
Full duplex SPI operation should not read a dummy byte at the first transfer. Bug and fix by Jean-Christian de Rivaz <jc@eclis.ch>: http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3678Signed-off-by:
Jean-Christian de Rivaz <jc@eclis.ch> Signed-off-by:
-
Bryan Wu authored
PBX 2 SPI devices need the nonstandard "cs change per word" mechanism. This patch is one of three updating this driver to make the last data bits get sent before advancing the transfer ... in this case, before the chipselect gets deactivated. Signed-off-by:
-
Bryan Wu authored
Use the SPI driver's name when requesting gpio lines. When there are gpio conflicts, this helps to narrow down the problems; "bfin-spi" is not informative. Signed-off-by:
-
Bryan Wu authored
Remove useless return status check in restore_state function. Issue was pointed out by Michael. Cc: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Girish authored
This adds driver OMAP SPI specific changes to support OMAP 3430 Signed-off-by:
Girish S G <girishsg@ti.com> Signed-off-by:
-
Magnus Damm authored
Add support for SPI over SCI pins. SCI is a very simple serial controller block that can be found on older SuperH processors. In theory it is possible to use the SCI hardware block in syncronous mode, but this version of the driver simply hooks up the bit banging code on the SCI pins. Signed-off-by:
Magnus Damm <damm@igel.co.jp> Signed-off-by:
-
David Brownell authored
The two S3C SPI master drivers got merged without much review, so I just noticed that they're doing something that the SPI core code is responsible for, rather than any adapter driver: they try to register SPI devices. This removes that support from those drivers so they act normally. Interestingly, none of the current boards are affected. So it's a net code shrink with no loss of functionality. Signed-off-by:
-
