- 27 Jul, 2005 40 commits
-
-
Horst Hummel authored
The FBA discipline does not use retries for failed requests. A request fails after the first unsuccessful start attempt. There are some rare conditions (e.g. CIO path recovery) in which the start of an i/o on a fba device can fail. A tiny amount of retries is therefore reasonable. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Cornelia Huck authored
When processing resource accessibility events, continue searching for further affected subchannels if a link address is provided in the event information. Signed-off-by:
-
Cornelia Huck authored
Fix debug data in case of an interface-control or channel-control check: don't log the not yet accumulated interrupt-response-block, but the one we just received. Signed-off-by:
-
Heiko Carstens authored
The kernel uses the SIGP external call order code to signal other CPUs. When running with dedicated CPUs external calls don't get delivered immediately but within a fixed polling invervall. This can lead to delays where the system appears to do nothing. Replace the SIGP external call order with the SIGP emergency call order since this one gets delivered immediately. Signed-off-by:
-
Heiko Carstens authored
The atomic64 primitives are supposed to have 64-bit parameters instead of int. Signed-off-by:
-
Martin Schwidefsky authored
The find_next_{zero}_bit primitives on s390* should never return a bit number bigger then the bit field size. In the case of a bitfield that doesn't end on a word boundary, an offset that makes the search start at the last word of the bit field and the last word doesn't contain any zero/one bits the search is continued with a call to find_first_bit with a negative size. The search normally ends pretty quickly because the words following the bit field contain a mix of zeros and ones. But the bit number that is returned in this case is too big. To fix this and additional if to check for this case is needed. To make the code easier to read I removed the assembler parts from the find_next_{zero}_bit functions, the C-ified code is as good. Signed-off-by: -
Martin Schwidefsky authored
Split spin lock and r/w lock implementation into a single try which is done inline and an out of line function that repeatedly tries to get the lock before doing the cpu_relax(). Add a system control to set the number of retries before a cpu is yielded. The reason for the spin lock retry is that the diagnose 0x44 that is used to give up the virtual cpu is quite expensive. For spin locks that are held only for a short period of time the costs of the diagnoses outweights the savings for spin locks that are held for a longer timer. The default retry count is 1000. Signed-off-by:
-
Miles Bader authored
Signed-off-by:
Miles Bader <miles@gnu.org> Signed-off-by:
-
Miles Bader authored
These changes are untested (I no longer have the hardware). Signed-off-by:
-
Miles Bader authored
Signed-off-by:
-
Miles Bader authored
Signed-off-by:
-
Miles Bader authored
Signed-off-by:
-
Miles Bader authored
Signed-off-by:
-
Miles Bader authored
Signed-off-by:
-
Mikael Starvik authored
* Added abstraction layer for subarchs. * Added v32 support. * Renamed driver. Signed-off-by:
Mikael Starvik <starvik@axis.com> Acked-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by:
-
Mikael Starvik authored
New CRIS sub architecture named v32. From: Dave Jones <davej@redhat.com> Fix swapped kmalloc args Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Mikael Starvik authored
Patches to make CRIS work with 2.6.12. Signed-off-by:
-
Mikael Starvik authored
Include file for synchronous serial port driver. Signed-off-by:
-
Mikael Starvik authored
Patches to support SMP. * Each CPU has its own current_pgd. * flush_tlb_range is implemented as flush_tlb_mm. * Atomic operations implemented with spinlocks. * Semaphores implemented with spinlocks. Signed-off-by:
-
Mikael Starvik authored
System-level profiler. Signed-off-by:
-
Mikael Starvik authored
Patches to make it possible to add PCI support. Signed-off-by:
-
Mikael Starvik authored
Memory management patches. * SMP support. * Non-executable stack (on v32). * 4-level page tables. * Added simple Thread Local Storage support. Signed-off-by:
-
Mikael Starvik authored
* Start threads with IRQs enabled. * Move symbol exports to arch specific file. * Prepare for real command line in the future. * Handle csum for partition that crosses flash boundary. * Set utsname. Signed-off-by:
-
Mikael Starvik authored
Use the generic IRQ framework Signed-off-by:
-
Mikael Starvik authored
Added I/O and DMA allocators to be used by drivers. Signed-off-by:
-
Mikael Starvik authored
Updates to device drivers. * Use I/O and DMA allocators. * Use wait_event_interruptible instead of interrutiple_sleep_on. * Added spinlocks SMP. * Changed restore_flags to local_irq_restore etc. * Updated IDE driver include to fit 2.6.12. Signed-off-by:
-
Mikael Starvik authored
Improvements to crash debug code. Signed-off-by:
-
Mikael Starvik authored
Changes to console. * Added LF->CRLF translation * Make use of real console framework. Signed-off-by:
-
Mikael Starvik authored
Changes to configuration and build system. * Added v32 sub architecture. * Use generic hard IRQ. * Added SMP options. * Added options to OOPS at NMI and reboot at OOM. * Made it possible to set objtree. * Added option to select Kernel GDB serial port. * Corrected Kconfig usage. * Added system profiler. Signed-off-by:
-
Mikael Starvik authored
Changes necessary to make the sub-arch split complete. Signed-off-by:
-
Adrian Bunk authored
There's no help text for CONFIG_DEBUG_STACKOVERFLOW - add one. Signed-off-by:
Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
-
Adrian Bunk authored
There's no help text for CONFIG_DEBUG_STACKOVERFLOW - add one. Signed-off-by:
-
Yoichi Yuasa authored
This patch has removed obsolete GIU driver for vr41xx. This patch already has been applied to mips tree. Signed-off-by:
Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
David Gibson authored
Presently the LparMap, one of the structures the kernel shares with the legacy iSeries hypervisor has a fixed offset address in head.S. This patch changes this so the LparMap is a normally initialized structure, without fixed address. This allows us to use macros to compute some of the values in the structure, which wasn't previously possible because the assembler always uses signed-% which gets the wrong answers for the computations in question. Unfortunately, a gcc bug means that doing this requires another structure (hvReleaseData) to be initialized in asm instead of C, but on the whole the result is cleaner than before. Signed-off-by:
David Gibson <dwg@au1.ibm.com> Signed-off-by:
-
David Gibson authored
PPC64 machines before Power4 need a segment table page allocated for each CPU. Currently these are allocated statically in a big array in head.S for all CPUs. The segment tables need to be in the first segment (so do_stab_bolted doesn't take a recursive fault on the stab itself), but other than that there are no constraints which require the stabs for the secondary CPUs to be statically allocated. This patch allocates segment tables dynamically during boot, using lmb_alloc() to ensure they are within the first 256M segment. This reduces the kernel image size by 192k... Tested on RS64 iSeries, POWER3 pSeries, and POWER5. Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Olaf Hering authored
Making a few functions static saves a few bytes, but only on ppc32. text data bss dec hex filename 3752421 1605208 345608 5703237 570645 ../O-ppc64_iSeries_defconfig/vmlinux 3709411 2042552 339992 6091955 5cf4b3 ../O-ppc64_maple_defconfig/vmlinux 5397329 3054824 679856 9132009 8b57e9 ../O-ppc64_pSeries_defconfig/vmlinux -3882695 417552 197760 4498007 44a257 ../O-ppc_common_defconfig/vmlinux -3414510 574500 241440 4230450 408d32 ../O-ppc_pmac_defconfig/vmlinux +3882627 417168 197760 4497555 44a093 ../O-ppc_common_defconfig/vmlinux +3414442 575428 241440 4231310 40908e ../O-ppc_pmac_defconfig/vmlinux Signed-off-by:Olaf Hering <olh@suse.de> Signed-off-by:
-
Andrew Morton authored
genrtc.c won't compile on ppc64. Seems that ppc32 does support it though? We do this wrong btw - we should be selecting GEN_RTC in each arch/xxx/Kconfig. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Olaf Hering authored
This bites me all day when I use our default config for ppc64. We use a patch to fix the compile errors and provide the CONFIG_MAC_EMUMOUSEBTN functionality (which is behind CONFIG_INPUT_ADBHID). But Benh doesnt like it. http://ozlabs.org/pipermail/linuxppc64-dev/2005-March/003423.html Just hide all the ADB parts from via-pmu on ppc64 instead. drivers/macintosh/adbhid.c: In function `adbhid_init': drivers/macintosh/adbhid.c:1199: error: `_MACH_chrp' undeclared (first use in this function) drivers/macintosh/adbhid.c:1199: error: (Each undeclared identifier is reported only once drivers/macintosh/adbhid.c:1199: error: for each function it appears in.) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Olaf Hering authored
update defconfig, use new CONFIG_HZ and set it to 100 just for the kicks. Signed-off-by:
-
Kumar Gala authored
Added missing include of cpm2.h in correct order to allow TQM8260 to build Signed-off-by:
Kumar Gala <kumar.gala@freescale.com> Signed-off-by:
-
