- 27 Sep, 2006 40 commits
-
-
David Brownell authored
This teaches OHCI to use the root hub status change (RHSC) IRQ, bypassing root hub timers most of the time and switching over to the "new" root hub polling scheme. It's complicated by the fact that implementations of OHCI trigger and ack that IRQ differently (the spec is vague there). Avoiding root hub timers helps mechanisms like "dynamic tick" leave the CPU in lowpower modes for longer intervals. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Sam Bishop authored
A little more detail on how and when to poll() /proc/bus/usb/devices. Signed-off-by:
Sam Bishop <sam@bishop.dhs.org> Signed-off-by:
-
Sam Bishop authored
Grammar, spelling, and stylistic edits. Signed-off-by:
-
Phil Dibowitz authored
This patch is a re-diffed version of one originally sent by Jan Mate <mate@fiit.stuba.sk>. Signed-off-by:
Phil Dibowitz <phil@ipom.com> Signed-off-by:
-
Alan Stern authored
This patch (as781) adds an entry to unusual_devs.h for the Lacie DVD+-RW drive. Apparently its USB interface has requirements similar to the Genesys Logic interface; it doesn't like data to be sent too soon after a command. This fixes Bugzilla #6817. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] minor reformatting to vmlinux.lds.S [IA64] CMC/CPE: Reverse the order of fetching log and checking poll threshold [IA64] PAL calls need physical mode, stacked [IA64] ar.fpsr not set on MCA/INIT kernel entry [IA64] printing support for MCA/INIT [IA64] trim output of show_mem() [IA64] show_mem() printk levels [IA64] Make gp value point to Region 5 in mca handler Revert "[IA64] Unwire set/get_robust_list" [IA64] Implement futex primitives [IA64-SGI] Do not request DMA memory for BTE [IA64] Move perfmon tables from thread_struct to pfm_context [IA64] Add interface so modules can discover whether multithreading is on. [IA64] kprobes: fixup the pagefault exception caused by probehandlers [IA64] kprobe opcode 16 bytes alignment on IA64 [IA64] esi-support [IA64] Add "model name" to /proc/cpuinfo
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (108 commits) sh: Fix occasional flush_cache_4096() stack corruption. sh: Calculate shm alignment at runtime. sh: dma-mapping compile fixes. sh: Initial vsyscall page support. sh: Clean up PAGE_SIZE definition for assembly use. sh: Selective flush_cache_mm() flushing. sh: More intelligent entry_mask/way_size calculation. sh: Support for L2 cache on newer SH-4A CPUs. sh: Update kexec support for API changes. sh: Optimized readsl()/writesl() support. sh: Report movli.l/movco.l capabilities. sh: CPU flags in AT_HWCAP in ELF auxvt. sh: Add support for 4K stacks. sh: Enable /proc/kcore support. sh: stack debugging support. sh: select CONFIG_EMBEDDED. sh: machvec rework. sh: Solution Engine SH7343 board support. sh: SH7710VoIPGW board support. sh: Enable verbose BUG() support. ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Kill bogus check from bootmem_init(). [SPARC64]: Update defconfig.
-
Andrew Morton authored
Avoid possible deadlock on a BUG() inside down_write(mmap_sem). The deadlock can only occur if something has gone horridly wrong, because a fault here shouldn't happen. Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
Add a version of __get_user() which is safe to call inside mmap_sem. Signed-off-by:
-
Eric W. Biederman authored
Ingo Oeser pointed out that because current expands to an inline function it is more space efficient and somewhat faster to simply keep a cached copy of current in another variable. This patch implements that for the de_thread function. (akpm: saves nearly 100 bytes of text on x86) Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Martin Bligh authored
Add missing \n to dprintk Signed-off-by:
Martin Bligh <mbligh@google.com> Acked-by:
Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by:
-
Eric W. Biederman authored
With the patches flying between Oleg and myself somehow this temporary debug code got left in pid.c. It was never intended to make it to the stable kernel. Signed-off-by:
-
Eric W. Biederman authored
In de_thread we move pids from one process to another, a rather ugly case. The function transfer_pid makes it clear what we are doing, and makes the action atomic. This is useful we ever want to atomically traverse the process group and session lists, in a rcu safe manner. Even if the atomic properties this change should be a win as transfer_pid should be less code to execute than executing both attach_pid and detach_pid, and this should make de_thread slightly smaller as only a single function call needs to be emitted. The only downside is that the code might be slower to execute as the odds are against transfer_pid being in cache. Signed-off-by:
-
Eric W. Biederman authored
Signed-off-by:
-
Eric W. Biederman authored
Since sys_sysctl is deprecated start allow it to be compiled out. This should catch any remaining user space code that cares, and paves the way for further sysctl cleanups. [akpm@osdl.org: If sys_sysctl() is not compiled-in, emit a warning] Signed-off-by:
-
Pekka J Enberg authored
Simpler, cleaner. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Marcelo Tosatti authored
The param section is an array of "kernel_param" structures, storing only constant data: pointer to name, permission of the variable pointed to by (void *)arg and pointers to set/get methods. Move end_rodata down to include __param section in the read-only range used by CONFIG_DEBUG_RODATA. Signed-off-by:
Marcelo Tosatti <marcelo@kvack.org> Acked-by:
Arjan van de Ven <arjan@infradead.org> Signed-off-by:
-
Andrew Morton authored
free_fdset(NULL, ...) is legal. Signed-off-by:
-
Michael Tokarev authored
Add modalias attribute support for the almost forgotten now EISA bus and (at least some) EISA-aware modules. The modalias entry looks like (for an 3c509 NIC): eisa:sTCM5093 and the in-module alias like: eisa:sTCM5093* The patch moves struct eisa_device_id declaration from include/linux/eisa.h to include/linux/mod_devicetable.h (so that the former now #includes the latter), adds proper MODULE_DEVICE_TABLE(eisa, ...) statements for all drivers with EISA IDs I found (some drivers already have that DEVICE_TABLE declared), and adds recognision of __mod_eisa_device_table to scripts/mod/file2alias.c so that proper modules.alias will be generated. There's no support for /lib/modules/$kver/modules.eisamap, as it's not used by any existing tools, and because with in-kernel modalias mechanism those maps are obsolete anyway. The rationale for this patch is: a) to make EISA bus to act as other busses with modalias support, to unify driver loading b) to foget about EISA finally - with this patch, kernel (who still supports EISA) will be the only one who knows how to choose the necessary drivers for this bus ;) [akpm@osdl.org: fix the kbuild bit] Signed-off-by:Michael Tokarev <mjt@tls.msk.ru> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Acked-the-net-bits-by:
Jeff Garzik <jeff@garzik.org> Acked-the-tulip-bit-by:
Valerie Henson <val_henson@linux.intel.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by:
-
Randy Dunlap authored
Consistently use MAX_ERRNO when checking for errors in __syscall_return(). [ralf@linux-mips.org: build fix] Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Shaohua Li authored
IA32 manual says if micorcode update's size is 0, then the size is default size (2048 bytes). But this doesn't suggest all microcode update's size should be above 2048 bytes to me. We actually had a microcode update whose size is 1024 bytes. The patch just removed the check. Signed-off-by:
Shaohua Li <shaohua.li@intel.com> Cc: Tigran Aivazian <tigran@veritas.com> Signed-off-by:
-
Shaohua Li authored
Add sysfs support. Currently each CPU has three microcode related attributes. One is 'version' which shows current ucode version of CPU. Tools can use the attribute do validation or show CPU ucode status. one is 'reload' which allows manually reloading ucode. Another is 'processor_flags', which exports processor flags, so we can write tools to check if CPU has latest ucode. Also add suspend/resume and CPU hotplug support. [akpm@osdl.org: cleanups, build fix] [bunk@stusta.de: Kconfig fixes] Signed-off-by:
Tigran Aivazian <tigran@veritas.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Shaohua Li authored
Using request_firmware to pull ucode from userspace, so we don't need the application 'microcode_ctl' to assist. We name each ucode file according to CPU's info as intel-ucode/family-model-stepping. In this way we could split ucode file as small one. This has a lot of advantages such as selectively update and validate microcode for specific models, better manage microcode file, easily write tools for administerators and so on. with the changes, we should put all intel-ucode/xx-xx-xx microcode files into the firmware dir (I had a tool to split previous big data file into small one and later we will release new style data file). The init script should be changed to just loading the driver without unloading Signed-off-by:
-
Shaohua Li authored
Clean up microcode update driver and make it more readable. [akpm@osdl.org: cleanups] Signed-off-by:
-
Adrian Bunk authored
Since the nolargeio option no longer has any effect, print a warning instead of setting a write-only variable. Signed-off-by:
-
Theodore Ts'o authored
This eliminates the i_blksize field from struct inode. Filesystems that want to provide a per-inode st_blksize can do so by providing their own getattr routine instead of using the generic_fillattr() function. Note that some filesystems were providing pretty much random (and incorrect) values for i_blksize. [bunk@stusta.de: cleanup] [akpm@osdl.org: generic_fillattr() fix] Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Theodore Ts'o authored
Move the i_cdev pointer in struct inode into a union. Signed-off-by:
-
Theodore Ts'o authored
Move the i_bdev pointer in struct inode into a union. Signed-off-by:
-
Theodore Ts'o authored
Move the i_pipe pointer into a union that will be shared with i_bdev and i_cdev. Signed-off-by:
-
Theodore Ts'o authored
The following patches reduce the size of the VFS inode structure by 28 bytes on a UP x86. (It would be more on an x86_64 system). This is a 10% reduction in the inode size on a UP kernel that is configured in a production mode (i.e., with no spinlock or other debugging functions enabled; if you want to save memory taken up by in-core inodes, the first thing you should do is disable the debugging options; they are responsible for a huge amount of bloat in the VFS inode structure). This patch: The filesystem or device-specific pointer in the inode is inside a union, which is pretty pointless given that all 30+ users of this field have been using the void pointer. Get rid of the union and rename it to i_private, with a comment to explain who is allowed to use the void pointer. This is just a cleanup, but it allows us to reuse the union 'u' for something something where the union will actually be used. [judith@osdl.org: powerpc build fix] Signed-off-by:
Judith Lebzelter <judith@osdl.org> Signed-off-by:
-
OGAWA Hirofumi authored
get_blocks() was removed. So, this removes it on fat, and will take advantage of the multi block mapping. Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Vivek Goyal authored
Resetting the devices during driver initialization can be a costly operation in terms of time (especially scsi devices). This option can be used by drivers to know that user forcibly wants the devices to be reset during initialization. This option can be useful while kernel is booting in unreliable environment. For ex. during kdump boot where devices are in unknown random state and BIOS execution has been skipped. Signed-off-by:
Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by:
-
Ian Kent authored
For a long time now I have had a problem with not being able to return a lookup failure on an existsing directory. In autofs this corresponds to a mount failure on a autofs managed mount entry that is browsable (and so the mount point directory exists). While this problem has been present for a long time I've avoided resolving it because it was not very visible. But now that autofs v5 has "mount and expire on demand" of nested multiple mounts, such as is found when mounting an export list from a server, solving the problem cannot be avoided any longer. I've tried very hard to find a way to do this entirely within the autofs4 module but have not been able to find a satisfactory way to achieve it. So, I need to propose a change to the VFS. Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Jeff Dike authored
Fix an instance of ptr=alloc(sizeof(ptr)). Grepping showed no more instances of this pattern. Also fixed the formatting in the area. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Jeff Dike authored
um_timer shouldn't add local_offset to the host time since get_time already did it. This threw off sleep when a settimeofday or equivalent had happened. Signed-off-by:
-
Jeff Dike authored
Some modules need strnlen_user_skas. Signed-off-by:
-
Jeff Dike authored
Move some foo_kern.c files to foo.c now that the old foo.c files are out of the way. Also cleaned up some whitespace and an emacs formatting comment. Signed-off-by:
-
Jeff Dike authored
fork on UML has always somewhat subtle. The underlying cause has been the need to initialize a stack for the new process. The only portable way to initialize a new stack is to set it as the alternate signal stack and take a signal. The signal handler does whatever initialization is needed and jumps back to the original stack, where the fork processing is finished. The basic context switching mechanism is a jmp_buf for each process. You switch to a new process by longjmping to its jmp_buf. Now that UML has its own implementation of setjmp and longjmp, and I can poke around inside a jmp_buf without fear that libc will change the structure, a much simpler mechanism is possible. The jmpbuf can simply be initialized by hand. This eliminates - the need to set up and remove the alternate signal stack sending and handling a signal the signal blocking needed around the stack switching, since there is no stack switching setting up the jmp_buf needed to jump back to the original stack after the new one is set up In addition, since jmp_buf is now defined by UML, and not by libc, it can be embedded in the thread struct. This makes it unnecessary to have it exist on the stack, where it used to be. It also simplifies interfaces, since the switch jmp_buf used to be a void * inside the thread struct, and functions which took it as an argument needed to define a jmp_buf variable and assign it from the void *. Signed-off-by:
-
