There are no more per-i2c-algorithm adapter max. Last time there were
was in July 1999.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Drop a useless initialization step in the w83627hf driver. The comment
says that the W83627HF PWM2 can be disabled, but it can't. I suppose
this is a leftover from the w83781d driver (from which the w83627hf
driver is derived), as for example the W83782D had the ability to
disable PWM2.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Drop legacy ISA address support from the it87 driver. All supported
chips are Super-I/O chips, so the device ISA address can be safely read
from Super-I/O space rather than blindly assumed.

Two nearby inaccurate documentation statements have been fixed as well:
* The IT8705F doesn't have an SMBus interface.
* The SiS950 doesn't have a distinct prefix.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Delete 2 out-of-date, colliding ioctl defines. I2C_UDELAY and
I2C_MDELAY are supposed to be used by i2c-algo-bit, but actually
aren't (and I suspect never were). Moreover, their values are the same
as I2C_FUNCS and I2C_SLAVE_FORCE, respectively, which *are* widely
used.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix a misplaced comment in i2c.h. Spotted by Hideki Iwamoto.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

i2c documentation fixes.

>From Hideki Iwamoto:
* i2c_smbus_read_i2c_block_data is not deleted in 2.6.10. It still
  exists.
* The name which can be set to i2c_driver is up to 31 characters.

>From Jean Delvare:
* Reword the paragraph about i2c_driver.name, to reflect the "new"
  naming policy.
* Delete the out-of-date note about now gone inc_use and dec_use
  fields.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

No more need to check for PEC support being available now that both
the i2c-core and the i2c-i801 drivers are part of the Linux kernel
source tree. It's just there.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch changes w83627hf and w83627ehf drivers to reserve only ports
0x295-0x296, instead of full 0x290-0x297 range.  While some other
sensors chips respond to all addresses in 0x290-0x297 range, Winbond
chips respond to 0x295-0x296 only (this behavior is implied by
documentation, and matches behavior observed on real systems).  This is
not problem alone, as no BIOS was found to put something at these unused
addresses, and sensors chip itself provides nothing there as well.

But in addition to only respond to these two addresses, also BIOS
vendors report in their ACPI-PnP structures that there is some resource
at I/O address 0x295 of length 2.  And when later this hwmon driver
attempts to request region with base 0x290/length 8, it fails as one
request_region cannot span more than one device.

Due to this we have to ask only for region this hardware really
occupies, otherwise driver cannot be loaded on systems with ACPI-PnP
enabled.
Signed-off-by: Petr Vandrovec <vandrove@vc.cvut.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

CVS revision IDs are totally useless and irrelevant by now.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Cleanup the ioctl debug message in i2c-dev. In particular, the minor
number is redundant now that the minor number and the adapter number
are kept in sync.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The ixp4xx and ixp2000 i2c bus drivers omit to fill the required
i2c_adapter name field. Copy the device driver name field there.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It's not nice to put #ifdef in the middle of functions.

CC: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/i2c/busses/i2c-viapro.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

Improve the register dump used to debug the i2c-viapro driver. The
original dump was missing the HSTSTS register and the block data
buffer.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/i2c/busses/i2c-viapro.c |   38 ++++++++++++++++++++++++++++++--------
 1 file changed, 30 insertions(+), 8 deletions(-)

By slightly shifting the interface between vt596_access and
vt596_transaction, we can save two I/O accesses per SMBus transaction.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/i2c/busses/i2c-viapro.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

Make it clearer which chips are supported by the i2c-viapro driver,
and which support I2C block transactions.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 Documentation/i2c/busses/i2c-viapro |   12 ++++++------
 drivers/i2c/busses/i2c-viapro.c     |   22 +++++++++++++---------
 2 files changed, 19 insertions(+), 15 deletions(-)

Cleanups to the i2c-viapro driver:
* Kill unused defines.
* Kill interrupt-related code, as the driver doesn't use interrupts.
* Fix broken comments (some copied from i2c-piix4.)
* Centralize the unsupported command error case in vt596_access.
  That way we'll catch all unsupported commands, not only
  I2C_SMBUS_PROC_CALL.
* Refactor some code.
* Convert some dev_dbg into dev_err. Errors better be reported even in
  non-debug mode.
* Do not verify that the final reset succeeded. It'll be checked at
  the beginning of the next transaction anyway.
* Use the driver name to reserve the I/O region.
* Do not print the contents of the SMBREV register, it reads 0 on all
  chips I've seen so far.
* Some other minor fixes all over the place.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/i2c/busses/i2c-viapro.c |  122 +++++++++++++---------------------------
 1 file changed, 41 insertions(+), 81 deletions(-)

Implement the I2C block transactions on VIA chips which support them:
VT82C686B, VT8233, VT8233A, VT8235 and VT8237R. This speeds up EEPROM
accesses by a factor 10 or so.

I would like to thank Antonino A. Daplas, Hinko Kocevar, Salah Coronya
and Andreas Henriksson for their help in testing this new feature.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 Documentation/i2c/busses/i2c-viapro |    7 +++++-
 drivers/i2c/busses/i2c-viapro.c     |   39 +++++++++++++++++++++++++++++++++---
 2 files changed, 42 insertions(+), 4 deletions(-)

Before I go on cleaning up and improving the i2c-viapro driver, let's
fix all the coding style issues: mostly trailing white space, and
spaces used where tabs should be.
Signed-off-by: Jean Delvare <khali@linux-fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 Documentation/i2c/busses/i2c-viapro |   12 ++---
 drivers/i2c/busses/i2c-viapro.c     |   76 ++++++++++++++++++------------------
 2 files changed, 43 insertions(+), 45 deletions(-)

I am taking over the maintenance of the i2c-viapro SMBus driver.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 MAINTAINERS |    6 ++++++
 1 file changed, 6 insertions(+)

Fix several errors in I2C SMBus emulation when PEC is used:
* Weird logic error in SMBus Write Word transactions.
* Wrong buffer size, affecting SMBus Block Write transactions.
* Potential buffer overrun in SMBus Block Write transactions.

From: Hideki Iwamoto <h-iwamoto@kit.hi-ho.ne.jp>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/i2c/i2c-core.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

I noticed a useless instruction in the i2c-amd8111 driver.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
CC: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/i2c/busses/i2c-amd8111.c |    1 -
 1 file changed, 1 deletion(-)

The i2c_smbus_data union block member has a comment stating that an
extra byte is required for SMBus Block Process Call transactions. This
has been true for three weeks around June 2002, but no more since, so
it is about time that we drop this comment and fix the definition.

From: Hideki Iwamoto <h-iwamoto@kit.hi-ho.ne.jp>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 include/linux/i2c.h |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

Fix the description of I2C_FUNC_PROTOCOL_MANGLING.

From: Hideki Iwamoto <h-iwamoto@kit.hi-ho.ne.jp>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 Documentation/i2c/functionality |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

Move the check for SMBUS_QUICK in i2c_probe() after the forced
addresses have been handled. This makes it possible for a driver to
leave the probed address lists empty, only providing forced addresses,
and get i2c_probe to work even if the bus doesn't support SMBUS_QUICK.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/i2c/i2c-core.c |   15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

Using s8 instead of u8 to store temperature register values saves a
few instructions on sysfs file read. The very same was done for
several other drivers a while ago (lm63, lm83, lm90...)
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/hwmon/w83l785ts.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Convert the w83l785ts driver to use dynamic sysfs callbacks. This is a
small driver so the benefit is thin, but still worth it.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/hwmon/w83l785ts.c |   36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

Clean up name string usage in 12 i2c bus drivers:
* Use the i2c_adapter name for requesting the I/O region rather than
  redefining a new string.
* Do not initialize the i2c_adapter name to "unset".
This should save a few data bytes here and there.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/i2c/busses/i2c-ali1535.c |    6 +++---
 drivers/i2c/busses/i2c-ali1563.c |    6 ++++--
 drivers/i2c/busses/i2c-ali15x3.c |    5 +++--
 drivers/i2c/busses/i2c-amd756.c  |    5 ++---
 drivers/i2c/busses/i2c-amd8111.c |    4 +++-
 drivers/i2c/busses/i2c-i801.c    |    4 ++--
 drivers/i2c/busses/i2c-nforce2.c |    4 ++--
 drivers/i2c/busses/i2c-piix4.c   |    4 ++--
 drivers/i2c/busses/i2c-sis5595.c |    5 +++--
 drivers/i2c/busses/i2c-sis630.c  |    6 ++++--
 drivers/i2c/busses/i2c-sis96x.c  |    5 +++--
 drivers/i2c/busses/i2c-via.c     |    4 ++--
 12 files changed, 33 insertions(+), 25 deletions(-)

Discard a common out-of-date comment in 5 hardware monitoring drivers.
The hardware monitoring chip drivers are no more setting sensor limits
at initialization time, for quite some time already.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/hwmon/lm78.c     |    1 -
 drivers/hwmon/via686a.c  |    1 -
 drivers/hwmon/w83627hf.c |    1 -
 drivers/hwmon/w83781d.c  |    1 -
 drivers/hwmon/w83792d.c  |    1 -
 5 files changed, 5 deletions(-)

Kill explicit static initializations to 0 in 2 hwmon drivers.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/hwmon/adm1021.c |    2 +-
 drivers/hwmon/via686a.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

Kill explicit static initializations to 0 in 10 i2c drivers.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/i2c/algos/i2c-algo-pca.c    |    2 +-
 drivers/i2c/algos/i2c-algo-sibyte.c |    2 +-
 drivers/i2c/busses/i2c-ali15x3.c    |    4 ++--
 drivers/i2c/busses/i2c-amd756.c     |    2 +-
 drivers/i2c/busses/i2c-iop3xx.c     |    2 +-
 drivers/i2c/busses/i2c-piix4.c      |    8 ++++----
 drivers/i2c/busses/i2c-sis5595.c    |    4 ++--
 drivers/i2c/busses/i2c-sis630.c     |    2 +-
 drivers/i2c/busses/i2c-sis96x.c     |    2 +-
 drivers/i2c/busses/i2c-via.c        |    2 +-
 10 files changed, 15 insertions(+), 15 deletions(-)

Do not enable the VIA VT82C686A/B integrated sensors by default, as
disabled sensors usually means that this feature is not used so the
values won't make any sense. This has been confusing many users in the
past:

  http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1786
  http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1811
  http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=2052

It is still possible to forcibly enable the sensors by using the
force_addr module parameter.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 Documentation/hwmon/via686a |   17 +++++++++++++++--
 drivers/hwmon/via686a.c     |   18 +++++++++++-------
 2 files changed, 26 insertions(+), 9 deletions(-)

This whitespace cleanup patch removes one trailing space and breaks
lines longer than 80 characters.
Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/hwmon/adm9240.c |   33 +++++++++++++++++++++------------
 1 file changed, 21 insertions(+), 12 deletions(-)

We can save 0.5kB of data in the via686a driver.

From: Denis Vlasenko <vda@ilport.com.ua>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hwmon: adm9240 update 2/2: convert to use dynamic sysfs accessors

This patch converts adm9240 to use Yani Ioannou's dynamic sysfs callbacks,
reducing driver memory footprint from 16312 to 14104 bytes on 2.6.14-rc1,
removing the old driver macro mess.

Run tested on Intel SE440BX-2 mobo.
Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

hwmon: adm9240 update 1/2: cleanups:

o remove i2c read/write wrapper interface as it does nothing,
o change kmalloc + memset to kzalloc
Signed-off-by: Grant Coady <gcoady@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

5.1.3.  Maximum Response Code

   The Maximum Response Code field specifies the maximum time allowed
   before sending a responding Report.  The actual time allowed, called
   the Maximum Response Delay, is represented in units of milliseconds,
   and is derived from the Maximum Response Code as follows:

   If Maximum Response Code < 32768,
      Maximum Response Delay = Maximum Response Code

   If Maximum Response Code >=32768, Maximum Response Code represents a
   floating-point value as follows:

       0 1 2 3 4 5 6 7 8 9 A B C D E F
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |1| exp |          mant         |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

   Maximum Response Delay = (mant | 0x1000) << (exp+3)


5.1.9.  QQIC (Querier's Query Interval Code)

   The Querier's Query Interval Code field specifies the [Query
   Interval] used by the Querier.  The actual interval, called the
   Querier's Query Interval (QQI), is represented in units of seconds,
   and is derived from the Querier's Query Interval Code as follows:

   If QQIC < 128, QQI = QQIC

   If QQIC >= 128, QQIC represents a floating-point value as follows:

       0 1 2 3 4 5 6 7
      +-+-+-+-+-+-+-+-+
      |1| exp | mant  |
      +-+-+-+-+-+-+-+-+

   QQI = (mant | 0x10) << (exp + 3)

                                                -- rfc3810

#define MLDV2_QQIC(value) MLDV2_EXP(0x80, 4, 3, value)
#define MLDV2_MRC(value) MLDV2_EXP(0x8000, 12, 3, value)

Above macro are defined in mcast.c. but 1 << 4 == 0x10 and 1 << 12 == 0x1000.
So the result computed by original Macro is larger.
Signed-off-by: Yan Zheng <yanzheng@21cn.com>
Acked-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>

Attached is kernel patch for UDP Fragmentation Offload (UFO) feature.

1. This patch incorporate the review comments by Jeff Garzik.
2. Renamed USO as UFO (UDP Fragmentation Offload)
3. udp sendfile support with UFO

This patches uses scatter-gather feature of skb to generate large UDP
datagram. Below is a "how-to" on changes required in network device
driver to use the UFO interface.

UDP Fragmentation Offload (UFO) Interface:
-------------------------------------------
UFO is a feature wherein the Linux kernel network stack will offload the
IP fragmentation functionality of large UDP datagram to hardware. This
will reduce the overhead of stack in fragmenting the large UDP datagram to
MTU sized packets

1) Drivers indicate their capability of UFO using
dev->features |= NETIF_F_UFO | NETIF_F_HW_CSUM | NETIF_F_SG

NETIF_F_HW_CSUM is required for UFO over ipv6.

2) UFO packet will be submitted for transmission using driver xmit routine.
UFO packet will have a non-zero value for

"skb_shinfo(skb)->ufo_size"

skb_shinfo(skb)->ufo_size will indicate the length of data part in each IP
fragment going out of the adapter after IP fragmentation by hardware.

skb->data will contain MAC/IP/UDP header and skb_shinfo(skb)->frags[]
contains the data payload. The skb->ip_summed will be set to CHECKSUM_HW
indicating that hardware has to do checksum calculation. Hardware should
compute the UDP checksum of complete datagram and also ip header checksum of
each fragmented IP packet.

For IPV6 the UFO provides the fragment identification-id in
skb_shinfo(skb)->ip6_frag_id. The adapter should use this ID for generating
IPv6 fragments.
Signed-off-by: Ananda Raju <ananda.raju@neterion.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (forwarded)
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>

The xtTruncate code was only doing this for leaf pages.  When a file is
horribly fragmented, we may truncate a file leaving an internal page with
an invalid head.next field, which may cause a stale page to be referenced.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>