Avaid provided test application, so bug got fixed.

IPv6 addrconf removes ipv6 inner device from netdev each time cmu
changes and new value is less than IPV6_MIN_MTU (1280 bytes).
When mtu is changed and new value is greater than IPV6_MIN_MTU,
it does not add ipv6 addresses and inner device bac.

This patch fixes that.

Tested with Avaid's application, which works ok now.
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

AF_RXRPC uses the crypto services, so should depend on or select CRYPTO.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The attached patch rate limits "WEP decrypt failed (ICV)" to avoid
flooding the logfiles.
Signed-off-by: Adel Gadllah <adel.gadllah@gmx.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

rfkill_toggle_radio is called from functions where
rfkill->mutex is already aquired.

Remove the lock from rfkill_toggle_radio() and add it to
the only calling function that calls it without the lock held.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch fixes a regression I (most likely) introduced, namely that
unencrypted frames are right now accepted even if we have a key for that
specific sender. That has very bad security implications.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch fixes:
- Incorrect calls to ieee80211_hw_config when the radiotap flag is set.
- Failure to actually unset the radiotap flag when all monitors are down.
- Failure to call ieee80211_hw_config after successful interface start.
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

There is no guarantee that data+SNAP_SIZE will reside on an even numbered
address, so doing a 16 bit read will cause an unaligned access in some
situations. Based on a patch from Jun Sun.
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

I'm not sure if this is best choice, someone might have better
solutions. But this patch fixed the connection problem when switching
from a WPA enabled AP (using wpa_supplicant) to an open AP (using
iwconfig). The root cause is when we connect to a WPA enabled AP,
wpa_supplicant sets the ifsta->extra_ie thru SIOCSIWGENIE. But if we
stop wpa_supplicant and connect to an open AP with iwconfig, there is
no way to clear the extra_ie so that mac80211 keeps connecting with that.

Someone could argue wpa_supplicant should clear the extra_ie during
its shutdown. But mac80211 should also handle the unexpected shutdown
case (ie. killall -9 wpa_supplicant).

On Wed, 2007-11-21 at 16:19 +0100, Johannes Berg wrote:
> Yeah. Can you amend the patch to also clear the
> IEEE80211_STA_PRIVACY_INVOKED flag?
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

SCTP-AUTH requires selection of CRYPTO, HMAC and SHA1 since
SHA1 is a MUST requirement for AUTH.  We also support SHA256,
but that's optional, so fix the code to treat it as such.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

In the case where no autheticated chunks were specified, we were still
trying to verify that a given chunk needs authentication and doing so
incorrectly.  Add a check for parameter length to make sure we don't
try to use an empty auth_chunks parameter to verify against.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

Supported extensions parameter was not coded right and ended up
over-writing memory or causing skb overflows.  First, remove
the FWD_TSN support from as it shouldn't be there and also fix
the paramter encoding.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

There was a typo that cleared the HMACS parameters when no
authenticated chunks were specified.  We whould be clearing
the chunks pointer instead of the hmacs.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

Our treatment of Heartbeats is special in that the inital HB chunk
counts against the error count for the association, where as for
other chunks, only retransmissions or timeouts count against us.
As a result, we had an off-by-1 situation with a number of
Heartbeats we could send.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

Lachlan Andrew observed that my TCP-Illinois implementation uses the
beta value incorrectly:
  The parameter  beta  in the paper specifies the amount to decrease
  *by*:  that is, on loss,
     W <-  W -  beta*W
  but in   tcp_illinois_ssthresh() uses  beta  as the amount
  to decrease  *to*: W <- beta*W

This bug makes the Linux TCP-Illinois get less-aggressive on uncongested network,
hurting performance. Note: since the base beta value is .5, it has no
impact on a congested network.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Andrew Morton reported that __xfrm_lookup generates this warning:

net/xfrm/xfrm_policy.c: In function '__xfrm_lookup':
net/xfrm/xfrm_policy.c:1449: warning: 'dst' may be used uninitialized in this function

This is because if policy->action is of an unexpected value then dst will
not be initialised.  Of course, in practice this should never happen since
the input layer xfrm_user/af_key will filter out all illegal values.  But
the compiler doesn't know that of course.

So this patch fixes this by taking the conservative approach and treat all
unknown actions the same as a blocking action.

Thanks to Andrew for finding this and providing an initial fix.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The following race is possible when one cpu unregisters the handler
while other one is trying to receive a message and call this one:

CPU1:                                                 CPU2:
inet_diag_rcv()                                       inet_diag_unregister()
  mutex_lock(&inet_diag_mutex);
  netlink_rcv_skb(skb, &inet_diag_rcv_msg);
    if (inet_diag_table[nlh->nlmsg_type] == 
                               NULL) /* false handler is still registered */
    ...
    netlink_dump_start(idiagnl, skb, nlh,
                           inet_diag_dump, NULL);
           cb = kzalloc(sizeof(*cb), GFP_KERNEL);
                   /* sleep here freeing memory 
                    * or preempt
                    * or sleep later on nlk->cb_mutex
                    */
                                                         spin_lock(&inet_diag_register_lock);
                                                         inet_diag_table[type] = NULL;
    ...                                                  spin_unlock(&inet_diag_register_lock);
                                                         synchronize_rcu();
                                                         /* CPU1 is sleeping - RCU quiescent
                                                          * state is passed
                                                          */
                                                         return;
    /* inet_diag_dump is finally called: */
    inet_diag_dump()
      handler = inet_diag_table[cb->nlh->nlmsg_type];
      BUG_ON(handler == NULL); 
      /* OOPS! While we slept the unregister has set
       * handler to NULL :(
       */

Grep showed, that the register/unregister functions are called
from init/fini module callbacks for tcp_/dccp_diag, so it's OK
to use the inet_diag_mutex to synchronize manipulations with the
inet_diag_table and the access to it.

Besides, as Herbert pointed out, asynchronous dumps should hold 
this mutex as well, and thus, we provide the mutex as cb_mutex one.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This hook is protected with the RCU, so simple

	if (br_should_route_hook)
		br_should_route_hook(...)

is not enough on some architectures.

Use the rcu_dereference/rcu_assign_pointer in this case.

Fixed Stephen's comment concerning using the typeof().
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In case the br_netfilter_init() (or any subsequent call) 
fails, the br_fdb_fini() must be called to free the allocated
in br_fdb_init() br_fdb_cache kmem cache.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

I am not absolutely sure whether this actually is a bug (as in: I've got
no clue what the standards say or what other implementations do), but at
least I was pretty surprised when I noticed that a recv() on a
non-blocking unix domain socket of type SOCK_SEQPACKET (which is connection
oriented, after all) where the remote end has closed the connection
returned -1 (EAGAIN) rather than 0 to indicate end of file.

This is a test case:

| #include <sys/types.h>
| #include <unistd.h>
| #include <sys/socket.h>
| #include <sys/un.h>
| #include <fcntl.h>
| #include <string.h>
| #include <stdlib.h>
| 
| int main(){
| 	int sock;
| 	struct sockaddr_un addr;
| 	char buf[4096];
| 	int pfds[2];
| 
| 	pipe(pfds);
| 	sock=socket(PF_UNIX,SOCK_SEQPACKET,0);
| 	addr.sun_family=AF_UNIX;
| 	strcpy(addr.sun_path,"/tmp/foobar_testsock");
| 	bind(sock,(struct sockaddr *)&addr,sizeof(addr));
| 	listen(sock,1);
| 	if(fork()){
| 		close(sock);
| 		sock=socket(PF_UNIX,SOCK_SEQPACKET,0);
| 		connect(sock,(struct sockaddr *)&addr,sizeof(addr));
| 		fcntl(sock,F_SETFL,fcntl(sock,F_GETFL)|O_NONBLOCK);
| 		close(pfds[1]);
| 		read(pfds[0],buf,sizeof(buf));
| 		recv(sock,buf,sizeof(buf),0); // <-- this one
| 	}else accept(sock,NULL,NULL);
| 	exit(0);
| }

If you try it, make sure /tmp/foobar_testsock doesn't exist.

The marked recv() returns -1 (EAGAIN) on 2.6.23.9. Below you find a
patch that fixes that.
Signed-off-by: Florian Zumbiehl <florz@florz.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Fix misbehavior of vlan_dev_hard_start_xmit() for recursive encapsulations.
Signed-off-by: Joonwoo Park <joonwpark81@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

sungem's gem_reset_task() will unconditionally try to disable NAPI even
when it's called while the interface is not operating and hence the NAPI
struct isn't enabled. Make napi_disable() depend on gp->running.

Also removes a superfluous test of gp->running in the same function.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The xfrm_timer calls __xfrm_state_delete, which drops the final reference
manually without triggering destruction of the state. Change it to use
xfrm_state_put to add the state to the gc list when we're dropping the
last reference. The timer function may still continue to use the state
safely since the final destruction does a del_timer_sync().
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

if you are lucky (unlucky?) enough to have shared interrupts, the
interrupt handler can be called before the tasklet and lock are ready
for use.
Signed-off-by: chas williams <chas@cmf.nrl.navy.mil>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The #ifdef's in arp_process() were not only a mess, they were also wrong 
in the CONFIG_NET_ETHERNET=n and (CONFIG_NETDEV_1000=y or 
CONFIG_NETDEV_10000=y) cases.

Since they are not required this patch removes them.

Also removed are some #ifdef's around #include's that caused compile 
errors after this change.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The skb_morph function only freed the data part of the dst skb, but leaked
the auxiliary data such as the netfilter fields.  This patch fixes this by
moving the relevant parts from __kfree_skb to skb_release_all and calling
it in skb_morph.

It also makes kfree_skbmem static since it's no longer called anywhere else
and it now no longer does skb_release_data.

Thanks to Yasuyuki KOZAKAI for finding this problem and posting a patch for
it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The inet_ehash_locks_alloc() looks like this:

#ifdef CONFIG_NUMA
	if (size > PAGE_SIZE)
		x = vmalloc(...);
	else
#endif
		x = kmalloc(...);

Unlike it, the inet_ehash_locks_alloc() looks like this:

#ifdef CONFIG_NUMA
	if (size > PAGE_SIZE)
		vfree(x);
	else
#else
		kfree(x);
#endif

The error is obvious - if the NUMA is on and the size
is less than the PAGE_SIZE we leak the pointer (kfree is
inside the #else branch).

Compiler doesn't warn us because after the kfree(x) there's
a "x = NULL" assignment, so here's another (minor?) bug: we 
don't set x to NULL under certain circumstances.

Boring explanation, I know... Patch explains it better.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The change 050f009e

	[IPSEC]: Lock state when copying non-atomic fields to user-space

caused a regression.

Ingo Molnar reports that it causes a potential dead-lock found by the
lock validator as it tries to take x->lock within xfrm_state_lock while
numerous other sites take the locks in opposite order.

For 2.6.24, the best fix is to simply remove the added locks as that puts
us back in the same state as we've been in for years.  For later kernels
a proper fix would be to reverse the locking order for every xfrm state
user such that if x->lock is taken together with xfrm_state_lock then
it is to be taken within it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The original code has striking complexity to perform a query
which can be reduced to a very simple compare.

FIN seqno may be included to write_seq but it should not make
any significant difference here compared to skb->len which was
used previously. One won't end up there with SYN still queued.

Use of write_seq check guarantees that there's a valid skb in
send_head so I removed the extra check.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: John Heffner <jheffner@psc.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

It seems that the checked range for receiver window check should
begin from the first rather than from the last skb that is going
to be included to the probe. And that can be achieved without
reference to skbs at all, snd_nxt and write_seq provides the
correct seqno already. Plus, it SHOULD account packets that are
necessary to trigger fast retransmit [RFC4821].

Location of snd_wnd < probe_size/size_needed check is bogus
because it will cause the other if() match as well (due to
snd_nxt >= snd_una invariant).

Removed dead obvious comment.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Your mail to 'Tlan-devel' with the subject

    drivers/net/tlan question

Is being held until the list moderator can review it for approval.

The reason it is being held:

    Post by non-member to a members-only list
Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

SPIN_LOCK_UNLOCKED is deprecated, use DEFINE_SPINLOCK instead
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

xs_setup_{udp,tcp}() can now become static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

From: Charles Hardin <chardin@2wire.com>

Kernel needs to respond to an SADB_GET with the same message type to
conform to the RFC 2367 Section 3.1.5
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Found this occasionally. 

The CONFIG_INET=n is hardly ever set, but if it is the 
irlan_eth_send_gratuitous_arp() compilation should produce a 
warning about unused variable in_dev.

Too pedantic? :)
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This is silly, but I have turned the CONFIG_IP_VS to m,
to check the compilation of one (recently sent) fix
and set all the CONFIG_IP_VS_PROTO_XXX options to n to
speed up the compilation.

In this configuration the compiler warns me about

  CC [M]  net/ipv4/ipvs/ip_vs_proto.o
net/ipv4/ipvs/ip_vs_proto.c:49: warning: 'register_ip_vs_protocol' defined but not used

Indeed. With no protocols selected there are no
calls to this function - all are compiled out with
ifdefs.

Maybe the best fix would be to surround this call with
ifdef-s or tune the Kconfig dependences, but I think that
marking this register function as __used is enough. No?
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix arp reply when received arp probe with sender ip 0.

Send arp reply with target ip address 0.0.0.0 and target hardware
address set to hardware address of requester. Previously sent reply
with target ip address and target hardware address set to same as
source fields.
Signed-off-by: Jonas Danielsson <the.sator@gmail.com>
Acked-by: Alexey Kuznetov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Due to the bug, refcnt for md5sig pool was leaked when
an user try to delete a key if we have more than one key.
In addition to the leakage, we returned incorrect return
result value for userspace.

This fix should close Bug #9418, reported by <ming-baini@163.com>.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>