- 12 Jul, 2006 8 commits
-
-
Heiko Carstens authored
Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Cornelia Huck authored
1. Multipath devices for which SetPGID is not supported are not handled well. Use NOP ccws for path verification (sans path grouping) when SetPGID is not supported. 2. Check for PGIDs already set with SensePGID on _all_ paths (not just the first one) and try to find a common one. Moan if no common PGID can be found (and use NOP verification). If no PGIDs have been set, use the css global PGID (as before). (Rationale: SetPGID will get a command reject if the PGID it tries to set does not match the already set PGID.) 3. Immediately before reboot, issue RESET CHANNEL PATH (rcp) on all chpids. This will remove the old PGIDs. rcp will generate solicited CRWs which can be savely ignored by the machine check handler (all other actions create unsolicited CRWs). Signed-off-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
The module parameters for xpram are not or in a wrong way parsed. The xpram module uses the module_param_array directive with an int parameter which causes the kernel to automatically parse the passed numbers. This will cause errors if arguments are omitted or cause wrong results if arguments have size qualifiers. Use module_param_array with charp and parse the arguments later. Signed-off-by:
-
Heiko Carstens authored
Signed-off-by:
-
Martin Schwidefsky authored
futex_atomic_cmpxchg_inatomic has the same bug as the other atomic futex operations: the operation needs to be done in the user address space, not the kernel address space. Add the missing sacf 256 & sacf 0. Signed-off-by: -
Cornelia Huck authored
Add a reg_mutex to prevent unregistering a subchannel before it has been registered. Since 2.6.17, we've seen oopses in kslowcrw when a device is found to be not operational during sense id when doing initial device recognition; it is not clear yet why that particular problem was not (yet) observed with earlier kernels... Signed-off-by:
-
Heiko Carstens authored
Make sure that raw_local_save_flags and raw_local_irq_restore always get an unsigned long parameter. raw_irqs_disabled should call raw_local_save_flags instead of local_save_flags. Signed-off-by:
-
Heiko Carstens authored
__builtin_trap() has the archictecture defined backend in gcc since gcc 3.3. To make sure the kernel builds with gcc 3.2 as well, use the old style BUG() statement if compiled with older gcc versions. Signed-off-by:
-
- 11 Jul, 2006 1 commit
-
-
Linus Torvalds authored
The MacMini board table seems to largely look like any bog-standard Intel 945 board. Signed-off-by:Linus Torvalds <torvalds@osdl.org>
-
- 10 Jul, 2006 31 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: ACPI_DOCK: Initialize the atomic notifier list ACPI: acpi_os_allocate() fixes ACPI: SBS: fix initialization, sem2mutex ACPI: add 'const' to several ACPI file_operations ACPI: delete some defaults from ACPI Kconfig ACPI: "Device `[%s]' is not power manageable" make message debug only ACPI: ACPI_DOCK Kconfig Revert "Revert "ACPI: dock driver"" ACPI: acpi_os_get_thread_id() returns current ACPI: ACPICA 20060707
-
Linus Torvalds authored
* HEAD: [DCCP]: Fix sparse warnings. [TCP]: Remove TCP Compound [BPQ] lockdep: fix false positive [IPV4] inetpeer: Get rid of volatile from peer_total [AX.25]: Get rid of the last volatile.
-
Andi Kleen authored
We can't safely directly access an compat_alloc_user_space() pointer with the siginfo copy functions. Bounce it through the stack. Noticed by Al Viro using sparse [ This was only added post 2.6.17, not in any released kernel ] Cc: Al Viro <viro@ftp.linux.org.uk> Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Andi Kleen authored
Add it for P4 model 6 - reported to work and have a similar PMU to earlier P4s. Add an p4force=1 module override parameter for future use. We had a discussion about that earlier - it's a trade off between the PMU staying compatible or not. I think the force parameter is a reasonable compromise. Cc: oprofile-list@lists.sf.net Cc: Asit Mallick <asit.k.mallick@intel.com> Signed-off-by:
-
Andi Kleen authored
No need for video to be always in No need for smart battery driver to be always in Acked-by:
Len Brown <len.brown@intel.com> Cc: linux-acpi@vger.kernel.org Signed-off-by:
-
Muli Ben-Yehuda authored
Signed-off-by:
Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by:
Jon Mason <jdmason@us.ibm.com> Signed-off-by:
-
Muli Ben-Yehuda authored
Signed-off-by:
-
Jacob Shin authored
Signed-off-by:
Jacob Shin <jacob.shin@amd.com> Signed-off-by:
-
Markus Schoder authored
Currently ia32 binaries behave differently with respect to enabling READ_IMPLIES_EXEC. On i386 a binary with the exec_stack flag set is executed with READ_IMPLIES_EXEC enabled as well. The same binary executes without READ_IMPLIES_EXEC on x86-64. This causes binaries that work on i386 to fail on x86-64 which goes somewhat against the whole 32 bit emulation idea. It has been argued that READ_IMPLIES_EXEC should not be enabled at all for binaries that have the exec_stack flag. Which is probably a valid point. However until this is clarified I think x86-64 should behave the same for ia32 binaries as i386. The following patch brings x86-64 in sync with i386 for ia32 binaries. Signed-off-by:
Markus Schoder <lists@gammarayburst.de> Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
-
Alan Cox authored
No actual bugs that I can see just a couple of unmarked casts getting annoying in my debug log files. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts: f890f921 The inclusion of TCP Compound needs to be reverted at this time because it is not 100% certain that this code conforms to the requirements of Developer's Certificate of Origin 1.1 paragraph (b). Signed-off-by:
-
Ralf Baechle authored
Bpqether is encapsulating AX.25 frames into ethernet frames. There is a virtual bpqether device paired with each ethernet devices, so it's normal to pass through dev_queue_xmit twice for each frame which triggers the locking detector. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Herbert Xu authored
The variable peer_total is protected by a lock. The volatile marker makes no sense. This shaves off 20 bytes on i386. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Ralf Baechle authored
This volatile makes no sense - not even wearing pink shades ... Signed-off-by:
-
Shankar Anand authored
Add an nfs4 operations count array to nfsd_stats structure. The count is incremented in nfsd4_proc_compound() where all the operations are handled by the nfsv4 server. This count of individual nfsv4 operations is also entered into /proc filesystem. Signed-off-by: Shankar Anand<shanand@novell.com> Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Eric Sesterhenn authored
Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Arjan van de Ven authored
Disable lockdep debugging in two situations where the integrity of the kernel no longer is guaranteed: when oopsing and when hitting a tainting-condition. The goal is to not get weird lockdep traces that don't make sense or are otherwise undebuggable, to not waste time. Lockdep assumes that the previous state it knows about is valid to operate, which is why lockdep turns itself off after the first violation it reports, after that point it can no longer make that assumption. A kernel oops means that the integrity of the kernel compromised; in addition anything lockdep would report is of lesser importance than the oops. All the tainting conditions are of similar integrity-violating nature and also make debugging/diagnosing more difficult. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Andrew Morton authored
Update Documentation/SubmitChecklist. - Mention lockdep coverage - Describe documentation requirements - Number the various items to simplify the composition of caustic emails. Signed-off-by:
-
Adrian Bunk authored
Add a proper prototype for i2o_parm_issue() in core.h. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by:
-
Christoph Hellwig authored
As announced half a year ago this patch will remove the tasklist_lock export. The previous two patches got rid of the remaining modular users. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Heiko Carstens authored
Remove BINFMT_ELF32 config option. Support should be always compiled in if CONFIG_COMPAT is set. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Christoph Hellwig authored
Currently most architectures either always build binfmt_elf32 in the kernel image or make it a boolean option. Only sparc64 and s390 allow to build it modularly. This patch turns the option into a boolean aswell because elf requires various symbols that shouldn't be available to modules. The most urgent one is tasklist_lock whos export this patch series kills, but there are others like force_sgi aswell. Note that sparc doesn't allow a modular 32bit a.out handler either, and that would be the more useful case as only few people want 32bit sunos compatibility and 99.9% of all sparc64 users need 32bit linux native elf support. Signed-off-by:
-
Christoph Hellwig authored
Currently the snsc driver uses force_sig to send init a SIGPWR when the system overheats. This patch switches it to kill_proc instead which has the following advantages: (1) gets rid of one of the last remaining tasklist_lock users in modular code (2) simplifies the snsc code significantly The downside is that an init implementation could in theory block SIGPWR and it would not get delivered. The sysvinit code used by all major distributions doesn't do this and blocking this signal in init would be a rather stupid thing to do. Signed-off-by: -
Jim Cromie authored
- Switch from register_chrdev() to (register|alloc)_chrdev_region(). - use a cdev. This was intended for original patchset, but was overlooked. We use a single cdev for all pins (minor device-numbers), as gleaned from cs5535_gpio, and in contrast to whats currently done in scx200_gpio (which I'll fix soon) Signed-off-by:
Jim Cromie <jim.cromie@gmail.com> Signed-off-by:
-
Jim Cromie authored
Fix module-init-func by repairing usage of platform_device_del/put in module-exit-func. IOW, it imitates Ingo's 'mishaps' patch, which fixed the module-init-func's undo handling. Also fixes lack of release_region to undo the earlier registration. Also starts to 'use a cdev' which was originally intended (its present in scx200_gpio). Code compiles and runs, exhibits a lesser error than previously. (re-register-chrdev fails) Since I had to add "include <linux/cdev.h>", I went ahead and made 2 tweaks that fell into diff-context-window: - remove include <linux/config.h> everyone's doing it - copyright updates - current date is 'wrong' Signed-off-by:
-
Jim Cromie authored
add constant defines - preparatory patch - adds #define CONSTs for max-pin, gpio-addr-range (for reserving region) - fix wrong max-pin check in gpio_open() - add 'Winbond' to module description. NSC sold the product, Winbond has supported us / lm-sensors Signed-off-by:
-
Chris Boot authored
Add LED Class device support for the Soekris net48xx Error LED. Tested only on a net4801, but should work on a net4826 as well. I'd love to find a way of detecting a Soekris net48xx device but there is no DMI or any Soekris-specific PCI devices. [akpm@osdl.org: fixlets, cleanups] Signed-off-by:
Chris Boot <bootc@bootc.net> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Andreas Gruenbacher authored
These functions no longer exist; remove their declarations. Signed-off-by:
Andreas Gruenbacher <agruen@suse.de> Signed-off-by:
-
Eric Sesterhenn authored
Signed-off-by:
-
Ingo Molnar authored
allyesconfig vmlinux size delta: text data bss dec filename 20736884 6073834 3075176 29885894 vmlinux.before 20721009 6073966 3075176 29870151 vmlinux.after ~18 bytes per callsite, 15K of text size (~0.1%) saved. (as an added bonus this also removes a lockdep annotation.) Signed-off-by:
-
