- 10 Oct, 2007 40 commits
-
-
Luis Carlos Cobo authored
After loading the firmware, mesh autostart will be disabled. After that, the user will still be able to enable or disable it at will. On suspend, it will be always activated and later on resume it will go back to the state it had before going to sleep. Signed-off-by:
Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Luis Carlos Cobo authored
CAPINFO_MASK changed on commits 981f187b and a091095b. Reverting to the original value. Also move CAPINFO_MASK into the sole user, join.c. CAPINFO_MASK should be in host CPU byte order; capability is converted to device byte order elsewhere. This fixes OLPC ticket #2161 Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Dan Williams authored
Signed-off-by:
-
Dan Williams authored
Send association event to userspace when reassociating to the same ad-hoc network, because it's still an association. Signed-off-by:
-
Holger Schurig authored
Purely cosmetic: this moves an lbs_deb_enter() to the proper place and changes an erraneous lbs_deb_enter_args() into lbs_deb_leave_args() Signed-off-by:
Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by:
-
Holger Schurig authored
Noone used this variable. Signed-off-by:
-
Holger Schurig authored
This value was parsed out, but then nowhere used ... except in some debugfs output. I can't imagine anyone wanting to use this value for anything real (as no other driver exports it), so bye-bye. Along this, made the columns of /sys/kernel/debug/libertas_wireless/*/getscantable align again. Signed-off-by:
-
Holger Schurig authored
scantype was initialized with CMD_SCAN_TYPE_ACTIVE, but there is no code that would ever change it, so we can use that variable directly. Signed-off-by:
-
Holger Schurig authored
scanmode was initialized with CMD_BSS_TYPE_ANY, but there is no code that ever can store another value there, so it can go away. Signed-off-by:
-
Holger Schurig authored
beaconperiod was initialized with MRVDRV_BEACON_INTERVAL, but there is no code that would ever change it's value. We can use the define directly. Signed-off-by:
-
Holger Schurig authored
The variable was initialized with 0 (false). There is no code that would ever change it, so we can use the false-patch directly. Signed-off-by:
-
Holger Schurig authored
listeninterval was initialized with MRVDRV_DEFAULT_LISTEN_INTERVAL, but there exists that would ever change it. So we can use this define directly. Signed-off-by:
-
Holger Schurig authored
The value was computed, but then never used. Signed-off-by:
-
Holger Schurig authored
This varaible was initialized with 0 but there is no code that would ever change it's value. So it can go away. Signed-off-by:
-
Holger Schurig authored
multipledtim was initialized with MRVDRV_DEFAULT_MULTIPLE_DTIM and then kept at that value, so we could use that define directly. Signed-off-by:
-
Holger Schurig authored
locallisteninterval was initialized with 0, but there is no code that changes it, rendering it rather useless. Signed-off-by:
-
Holger Schurig authored
No code ever initialized this variable, so it was 0 because of kzalloc(). But no other code changes it, making it rather useless. Signed-off-by:
-
Holger Schurig authored
Those two variables were initialized with some default values, but there is no code that would ever change them. So we could use as well the defaults directly. Signed-off-by:
-
Holger Schurig authored
No code uses the contents of this variable, so it can go. Signed-off-by:
-
Holger Schurig authored
The value of txrate was only set by a CMD_802_11_TX_RATE_QUERY command, but there was no code in the driver that ever issued this command. Signed-off-by:
-
Dan Williams authored
Found by Ronak and others at Marvell. Signed-off-by:
-
Holger Schurig authored
The variable was initialized to 0 and nowhere else changed, so basically the per-packet TX control wasn't used. Signed-off-by:
-
Holger Schurig authored
The variable was initialized to 0 and nowhere else to anything different. Signed-off-by:
-
Holger Schurig authored
The value 1 was assigned to it and there was nowhere any code that would have changed that to 0. Signed-off-by:
-
Holger Schurig authored
There was nowhere any code that used the values of those variables. This patch also removes two static functions that are now unused. Signed-off-by:
-
Holger Schurig authored
There were just used in some debug output, but nowhere else. Signed-off-by:
-
Holger Schurig authored
This patch adds support for Marvell based 8385 compact flash cards. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Luis Carlos Cobo authored
Signed-off-by:
-
Holger Schurig authored
... and LBS_DEB_CMD for command execution. Also tidies misc comments to give a consistent output. Signed-off-by:
-
Holger Schurig authored
... and LBS_DEB_CMD for command execution. Also tidies misc comments to give a consistent output. Signed-off-by:
-
Holger Schurig authored
types.h contains the same amount of CMD_RET_xxx and CMD_xxx definitions. They contains the same info: the firmware command opcode and, when the firmware sends back a result, the command opcode ORed with 0x8000. Having the same data twice in the source code is redundant and can lead to errors (e.g. if you update or delete only one instance). This patch removed all CMD_RET_xxx definitions and introduces a simple CMD_RET() macro. Signed-off-by:
-
Holger Schurig authored
Currently, when you define LBS_DEB_HEX, you get every hex dump in the whole driver, e.g. for LBS_DEB_CMD, LBS_DEB_RX, LBS_DEB_TX etc. This patch makes sure that you only get the hexdump that you're interested in. Renamed lbs_dbg_hex() into lbs_deb_hex(), like the other lbs_deb_XXX() macros. Made lbs_deb_hex() issue a line feed (and a new prompt) after 16 bytes. As lbs_deb_hex() now prints the ":" after the prompt by itself, removed the misc colons in the various *.c files. lbs_deb_XXX() now print the debug category as well. As lbs_deb_XXX() --- and especially lbs_deb_11d() --- now print the category, I removed various "11D:" prefixes in 11d.c as well. Signed-off-by:
-
Luis Carlos Cobo authored
echo 0 > /sys/class/net/mshX/autostart_enabled This is supported from Marvell firmware version 5.110.16.p0 (to be released). Signed-off-by:
-
Holger Schurig authored
There is nowhere any place that set's this variable. Signed-off-by:
-
Holger Schurig authored
This changes the output of hardware related info from: libertas: GET_HW_SPEC: FWReleaseVersion- 5.0.11.p0 libertas: GET_HW_SPEC: Permanent addr- 0:16:41:72:f6:a8 libertas: GET_HW_SPEC: hwifversion=0x2 version=0x213 to: libertas: GET_HW_SPEC: FWReleaseVersion: 5.0.11.p0 libertas: GET_HW_SPEC: Permanent addr: 00:16:41:72:f6:a8 libertas: GET_HW_SPEC: hwifversion: 0x2, version: 0x213 Signed-off-by:
-
Holger Schurig authored
The CF/SDIO firmware doesn't support Mesh, so priv->mesh_dev is NULL there. Protect all accesses. Signed-off-by:
-
Holger Schurig authored
Usually constants defined by #define are in ALL_UPPERCASE. This patch fixes this. I also shuffled the bits around so that they match the bit positions in the host-interrupt-state register of the CF/SDIO card :-) Signed-off-by:
-
Holger Schurig authored
Some functions where declared in header files, but used only once. They are now static functions. After doing this, I found out that some functions weren't used at all. I removed this dead code. Signed-off-by:
-
Holger Schurig authored
adhoc_rates_b is only used locally, so make it static Signed-off-by:
-
Holger Schurig authored
Firmware download is quite different for different hardware. The SDIO and CF cards have two flat files that need to be downloaded, whereas the USB driver needs only one file, but with an internal structure. The code that handles this (USB only) structured file is currently in fw.c. This patch moves this code into if_usb.c. The remaining functions in fw.c have not much to do with firmware, they are various card- and network-stack initialisation functions. I've moved them into main.c. Signed-off-by:
-
