The following patch fixes the regression in 2.6.27 that causes kernel
NULL pointer dereference at cpqphp driver probe time.  This patch should
be backported to the .27 stable series.

Seems to have been introduced by
f46753c5.

The root cause of this problem seems that cpqphp driver calls
pci_hp_register() wrongly. In current implementation, cpqphp driver
passes 'ctrl->pci_dev->subordinate' as a second parameter for
pci_hp_register(). But because hotplug slots and it's hotplug controller
(exists as a pci funcion) are on the same bus, it should be
'ctrl->pci_dev->bus' instead.

Cc: <stable@kernel.org>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Variable 'ret' is no longer used. Don't declare it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: Fix GPIO initcall breakage
  avr32: Scale loops_per_jiffy when cpu frequency changes
  avr32: Fix bug in LCD pin setup on port C
  avr32: Add defconfig for the favr-32 board
  avr32: Add defconfig for the mimc200 board
  avr32: Add MIMC200 board support
  avr32: Fix MIMC200 board use of SPD network pins
  avr32: add support for EarthLCD Favr-32 board
  avr32: Add support for EVKLCD10X addon boards
  avr32: Kconfig: Remove pointless if around atstk1000 include

* git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev: (66 commits)
  [PATCH] kill the rest of struct file propagation in block ioctls
  [PATCH] get rid of struct file use in blkdev_ioctl() BLKBSZSET
  [PATCH] get rid of blkdev_locked_ioctl()
  [PATCH] get rid of blkdev_driver_ioctl()
  [PATCH] sanitize blkdev_get() and friends
  [PATCH] remember mode of reiserfs journal
  [PATCH] propagate mode through swsusp_close()
  [PATCH] propagate mode through open_bdev_excl/close_bdev_excl
  [PATCH] pass fmode_t to blkdev_put()
  [PATCH] kill the unused bsize on the send side of /dev/loop
  [PATCH] trim file propagation in block/compat_ioctl.c
  [PATCH] end of methods switch: remove the old ones
  [PATCH] switch sr
  [PATCH] switch sd
  [PATCH] switch ide-scsi
  [PATCH] switch tape_block
  [PATCH] switch dcssblk
  [PATCH] switch dasd
  [PATCH] switch mtd_blkdevs
  [PATCH] switch mmc
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (46 commits)
  [PATCH] fs: add a sanity check in d_free
  [PATCH] i_version: remount support
  [patch] vfs: make security_inode_setattr() calling consistent
  [patch 1/3] FS_MBCACHE: don't needlessly make it built-in
  [PATCH] move executable checking into ->permission()
  [PATCH] fs/dcache.c: update comment of d_validate()
  [RFC PATCH] touch_mnt_namespace when the mount flags change
  [PATCH] reiserfs: add missing llseek method
  [PATCH] fix ->llseek for more directories
  [PATCH vfs-2.6 6/6] vfs: add LOOKUP_RENAME_TARGET intent
  [PATCH vfs-2.6 5/6] vfs: remove LOOKUP_PARENT from non LOOKUP_PARENT lookup
  [PATCH vfs-2.6 4/6] vfs: remove unnecessary fsnotify_d_instantiate()
  [PATCH vfs-2.6 3/6] vfs: add __d_instantiate() helper
  [PATCH vfs-2.6 2/6] vfs: add d_ancestor()
  [PATCH vfs-2.6 1/6] vfs: replace parent == dentry->d_parent by IS_ROOT()
  [PATCH] get rid of on-stack dentry in udf
  [PATCH 2/2] anondev: switch to IDA
  [PATCH 1/2] anondev: init IDR statically
  [JFFS2] Use d_splice_alias() not d_add() in jffs2_lookup()
  [PATCH] Optimise NFS readdir hack slightly.
  ...

* 'x86/um-header' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (26 commits)
  x86: canonicalize remaining header guards
  x86: drop double underscores from header guards
  x86: Fix ASM_X86__ header guards
  x86, um: get rid of uml-config.h
  x86, um: get rid of arch/um/Kconfig.arch
  x86, um: get rid of arch/um/os symlink
  x86, um: get rid of excessive includes of uml-config.h
  x86, um: get rid of header symlinks
  x86, um: merge Kconfig.i386 and Kconfig.x86_64
  x86, um: get rid of sysdep symlink
  x86, um: trim the junk from uml ptrace-*.h
  x86, um: take vm-flags.h to sysdep
  x86, um: get rid of uml asm/arch
  x86, um: get rid of uml highmem.h
  x86, um: get rid of uml unistd.h
  x86, um: get rid of system.h -> system.h include
  x86, um: uml atomic.h is not needed anymore
  x86, um: untangle uml ldt.h
  x86, um: get rid of more uml asm/arch uses
  x86, um: remove dead header (uml module-generic.h; never used these days)
  ...

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (123 commits)
  dock: make dock driver not a module
  ACPI: fix ia64 build warning
  ACPI: hack around sysfs warning with link order
  ACPI suspend: fix build warning when CONFIG_ACPI_SLEEP=n
  intel_menlo: fix build warning
  panasonic-laptop: fix build
  ACPICA: Update version to 20080926
  ACPICA: Add support for zero-length buffer-to-string conversions
  ACPICA: New: Validation for predefined ACPI methods/objects
  ACPICA: Fix for implicit return compatibility
  ACPICA: Fixed a couple memory leaks associated with "implicit return"
  ACPICA: Optimize buffer allocation procedure
  ACPICA: Fix possible memory leak, error exit path
  ACPICA: Fix fault after mem allocation failure in AML parser
  ACPICA: Remove unused ACPI register bit definition
  ACPICA: Update version to 20080829
  ACPICA: Fix possible memory leak in acpi_ns_get_external_pathname
  ACPICA: Cleanup for internal Reference Object
  ACPICA: Update comments - no functional changes
  ACPICA: Update for Reference ACPI_OPERAND_OBJECT
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits)
  sh: asm/gpio.h needs linux/kernel.h for might_sleep()/WARN_ON().
  sh: mach-highlander: Handle SCIF pinmuxing on R7785RP.
  sh: sh7785 pinmux support
  sh: update defconfigs.
  sh: Kill off unused p1fc divisors from SH7763 clk fwk.
  sh: improve pinmux support for single direction pins
  sh: use 10MHz VIO_CLK for ov772x on Migo-R
  sh: Update gpio_set_value() pin value handling
  sh: update ov772x byte order on Migo-R
  rtc: Add R2025S/D comment to rs5c372 Kconfig entry.
  sh: Export cache flush routines needed by sh_eth on SH7619.
  sh: Wire up oops reporting in the die notifier chain.
  sh: ap325rxa: Kill off unused port definitions.
  sh: Hook up PB0->PB7 input-only pins in SH7203 PFC.
  sh: ap325rxa: Move off of hardcoded pinmux for flctl initialization.
  sh: add support FLCTL for ap325rxa board
  sh: gpio: Stub in dummy GPIO<->IRQ mapping routines.
  sh: rsk7203: leds-gpio support for RSK+ LEDs.
  sh: gpio: Include asm-generic/gpio.h for non-gpiolib stubs.
  sh: fix soc-camera compile breakage on Migo-R.
  ...

* 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: Avoid oops in DRM_IOCTL_RM_DRAW if a bad handle is supplied.
  drm: Add 32-bit compatibility for DRM_IOCTL_UPDATE_DRAW.
  drm/i915: use pipes, not planes to label vblank data
  drm/i915: hold dev->struct_mutex and DRM lock during vblank ring operations
  i915: Fix format string warnings on x86-64.
  i915: Don't dereference HWS in /proc debug files when it isn't initialized.
  i915: Enable IMR passthrough of vblank events before enabling it in pipestat.
  drm: Remove two leaks of vblank reference count in error paths.
  drm: fix leak of cliprects in drm_rmdraw()
  i915: Disable MSI on GM965 (errata says it doesn't work)
  drm: Set cliprects to NULL when changing drawable to having 0 cliprects.
  i915: Protect vblank IRQ reg access with spinlock

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (32 commits)
  PCI hotplug: fix logic in Compaq hotplug controller bus speed setup
  PCI: don't export linux/io.h from pci.h
  PCI: PCI_QUIRKS depends on PCI
  PCI hotplug: pciehp: poll data link layer link active
  PCI hotplug: pciehp: fix possible memory leak in pcie_init
  PCI: Workaround invalid P2P bridge bus numbers
  PCI Hotplug: fakephp: add duplicate slot name debugging
  PCI: Hotplug core: remove 'name'
  PCI: shcphp: remove 'name' parameter
  PCI: SGI Hotplug: stop managing bss_hotplug_slot->name
  PCI: rpaphp: kmalloc/kfree slot->name directly
  PCI: pciehp: remove 'name' parameter
  PCI: ibmphp: stop managing hotplug_slot->name
  PCI: fakephp: remove 'name' parameter
  PCI, PCI Hotplug: introduce slot_name helpers
  PCI: cpqphp: stop managing hotplug_slot->name
  PCI: cpci_hotplug: stop managing hotplug_slot->name
  PCI: acpiphp: remove 'name' parameter
  PCI: prevent duplicate slot names
  PCI Hotplug: serialize pci_hp_register and pci_hp_deregister
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: fix sparse warnings
  9p: rdma: RDMA Transport Support for 9P
  9p: fix format warning
  9p: fix debug build error

* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux:
  nfsd: clean up expkey_parse error cases
  nfsd: Drop reference in expkey_parse error cases
  nfsd: Fix memory leak in nfsd_getxattr
  NFSD: Fix BUG during NFSD shutdown processing

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Add info->archdata field
  i2c: Inform about deprecated chips directory
  i2c: Use pci_ioremap_bar()
  Schedule removal of the legacy i2c device driver binding model
  i2c: Clean up <linux/i2c.h>
  i2c: Update and clean up writing-clients document
  i2c: Drop 2-byte address block transfer defines
  i2c: Delete legacy model documentation
  i2c: Constify i2c_get_clientdata's parameter
  i2c: Delete outdated client porting guide
  i2c: Make clear what the class field of i2c_adapter is good for
  i2c-algo-pcf: Fix typo in debugging log message
  i2c-algo-pcf: Add adapter hooks around xfer begin and end
  i2c-algo-pcf: Pass adapter data into ->waitforpin() method
  i2c-i801: Add support for Intel Ibex Peak

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: don't rebind drivers after failed resume or reset
  USB: fix memory leak in cdc-acm
  USB: Unusual dev for Mio moov 330 gps
  USB: cdc-wdm: make module autoload work
  USB: Fix unneeded endpoint check in pxa27x_udc
  usb/gadget: fix kernel-doc warning
  USB: Speedtouch: add pre_reset and post_reset routines
  USB: usbtest.c: length, sglen and vary are unsigned, so cannot be negative
  USB: support Huawei data card product IDs
  USB: add ZTE MF626 USB GSM modem entry
  USB: storage: Avoid I/O errors when issuing SCSI ioctls to JMicron USB/ATA bridge
  USB: Fix debugfs_create_file's error checking method for usb/gadget/s3c2410_udc
  USB: ohci: add support for tmio-ohci cell

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (42 commits)
  Staging: usbip: fix build warning on 64bit kernels
  Staging: me4000: remove some compiler warnings
  Staging: wbusb: fix a bunch of compiler warnings
  Staging: w35und: module init cleanup
  Staging: w35und: use gotos for error handling
  Staging: w35und: remove spinlock wrappers
  Staging: sxg: fix compiler warnings.
  Staging: sxg: fix up unused function warnings
  Staging: sxg: clean up C99 comments
  Staging: Lindent the echo driver
  Staging: SLICOSS: Free multicast list at driver exit
  Staging: PCC-ACPI: Fix all checkpatch errors
  Staging: pcc-acpi: update to latest version
  Staging: Clean up sxg driver
  Staging: remove remaining uses of __FUNCTION__
  Staging: add poch driver
  Staging: wlan-ng: fix build error if wireless networking is not enabled
  Staging: echo: remove annoying "end of function" markers
  Staging: echo: remove __cplusplus macro magic
  Staging: echo: remove dead code
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile: (21 commits)
  OProfile: Fix buffer synchronization for IBS
  oprofile: hotplug cpu fix
  oprofile: fixing whitespaces in arch/x86/oprofile/*
  oprofile: fixing whitespaces in arch/x86/oprofile/*
  oprofile: fixing whitespaces in drivers/oprofile/*
  x86/oprofile: add the logic for enabling additional IBS bits
  x86/oprofile: reordering functions in nmi_int.c
  x86/oprofile: removing unused function parameter in add_ibs_begin()
  oprofile: more whitespace fixes
  oprofile: whitespace fixes
  OProfile: Rename IBS sysfs dir into "ibs_op"
  OProfile: Rework string handling in setup_ibs_files()
  OProfile: Rework oprofile_add_ibs_sample() function
  oprofile: discover counters for op ppro too
  oprofile: Implement Intel architectural perfmon support
  oprofile: Don't report Nehalem as core_2
  oprofile: drop const in num counters field
  Revert "Oprofile Multiplexing Patch"
  x86, oprofile: BUG: using smp_processor_id() in preemptible code
  x86/oprofile: fix on_each_cpu build error
  ...

Manually fixed trivial conflicts in
	drivers/oprofile/{cpu_buffer.c,event_buffer.h}

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  stop_machine: fix error code handling on multiple cpus
  stop_machine: use workqueues instead of kernel threads
  workqueue: introduce create_rt_workqueue
  Call init_workqueues before pre smp initcalls.
  Make panic= and panic_on_oops into core_params
  Make initcall_debug a core_param
  core_param() for genuinely core kernel parameters
  param: Fix duplicate module prefixes
  module: check kernel param length at compile time, not runtime
  Remove stop_machine during module load v2
  module: simplify load_module.

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (36 commits)
  V4L/DVB (9336): cx88: always de-alloc frontends on fault condition
  V4L/DVB (9335): videobuf: split unregister bus creating self-contained frontend de-allocator
  V4L/DVB (9334): cx88: dvb_remove debug output
  V4L/DVB (9333): cx88: Not all boards that requires cx88-mpeg has frontends
  V4L/DVB (9332): cx88: initial fix for analogue only compilation
  V4L/DVB (9331): Remove unused inode parameter from video_ioctl2
  V4L/DVB (9330): Get rid of inode parameter at v4l_compat_translate_ioctl()
  V4L/DVB (9328): ivtvfb: FB_BLANK_POWERDOWN turns off video output
  V4L/DVB (9327): v4l: use video_device.num instead of minor in video%d
  V4L/DVB (9326): ivtv: avoid green flashing when loading ivtv
  V4L/DVB (9325): ivtv: switch to unlocked_ioctl.
  V4L/DVB (9324): v4l2: add video_ioctl2_unlocked for unlocked_ioctl support.
  V4L/DVB (9323): v4l2-int-if: Add enum_framesizes and enum_frameintervals ioctls.
  V4L/DVB (9322): v4l2-int-if: Export more interfaces to modules
  V4L/DVB (9321): v4l2-int-if: Define new power state changes
  V4L/DVB (9320): v4l2: Add 10-bit RAW Bayer formats
  V4L/DVB (9319): v4l2-int-if: Add cropcap, g_crop and s_crop commands.
  V4L/DVB (9318): v4l2-int-if: Add command to get slave private data.
  V4L/DVB (9316): s5h1411: Power down s5h1411 when not in use
  V4L/DVB (9315): s5h1411: Skip reconfiguring demod modulation if already at the desired modulation
  ...

Merge branch 'v28-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'v28-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  NOHZ: fix thinko in the timer restart code path

* git://git.infradead.org/iommu-2.6:
  Admit to maintaining VT-d, for my sins.
  dmar: fix uninitialised 'ret' variable in dmar_parse_dev()
  intel-iommu: use coherent_dma_mask in alloc_coherent
  amd_iommu: fix nasty bug that caused ILLEGAL_DEVICE_TABLE_ENTRY errors
  intel-iommu: IA64 support
  dmar: remove the quirk which disables dma-remapping when intr-remapping enabled
  dmar: Use queued invalidation interface for IOTLB and context invalidation
  dmar: context cache and IOTLB invalidation using queued invalidation
  dmar: use spin_lock_irqsave() in qi_submit_sync()

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: remove useless subdirs from drivers/ide/

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm: tidy local_init
  dm: remove unused flush_all
  dm raid1: separate region_hash interface part1
  dm: mark split bio as cloned
  dm crypt: remove waitqueue
  dm crypt: fix async split
  dm crypt: tidy sector
  dm: remove dm header from targets
  dm: publish array_too_big
  dm exception store: fix misordered writes
  dm exception store: refactor zero_area
  dm snapshot: drop unused last_percent
  dm snapshot: fix primary_pe race
  dm kcopyd: avoid queue shuffle

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcupdate: fix bug of rcu_barrier*()
  profiling: fix !procfs build

Fixed trivial conflicts in 'include/linux/profile.h'

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: disable the hrtick for now
  sched: revert back to per-rq vruntime
  sched: fair scheduler should not resched rt tasks
  sched: optimize group load balancer
  sched: minor fast-path overhead reduction
  sched: fix the wrong mask_len, cleanup
  sched: kill unused scheduler decl.
  sched: fix the wrong mask_len
  sched: only update rq->clock while holding rq->lock

Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: NULL struct irq_desc's member 'name' in dynamic_irq_cleanup()
  genirq: fix off by one and coding style
  genirq: fix set_irq_type() when recording trigger type

These have the Mainpine PCI identifier on however

Additional paranoia check for Tornado versions added by Alan Cox

(and this time I remembered to do an stg refresh so that the corrections ended
 up in these patches not randomly attached to another diff -- Alan)
Signed-off-by: Lee Howard <lee.howard@mainpine.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add support for the OxSemi 'Tornado' devices.

Reformatted and reworked a bit by Alan Cox
Signed-off-by: Lee Howard <lee.howard@mainpine.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pass the brown paper bags please. I changed the semantics of this so the
function was supposed to do the extra kref itself then forgot to do the
change.. duh....
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This seems to have popped up after the recent merges:

drivers/watchdog/w83697ug_wdt.c: In function ‘w83697ug_select_wd_register’:
drivers/watchdog/w83697ug_wdt.c:105: warning: ‘return’ with a value, in function returning void
Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

- atomic operations which both modify the variable and return something imply
  full smp memory barriers before and after the memory operations involved
  (failing atomic_cmpxchg, atomic_add_unless, etc don't imply a barrier because
  they don't modify the target). See Documentation/atomic_ops.txt.
  So remove extra barriers and branches.

- All architectures support atomic_cmpxchg. This has no relation to
  __HAVE_ARCH_CMPXCHG. We can just take the atomic_cmpxchg path unconditionally

This reduces a simple single threaded fastpath lock+unlock test from 590 cycles
to 203 cycles on a ppc970 system.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/czankel/xtensa-2.6:
  xtensa: Add config files for Diamond 232L - Rev B processor variant
  xtensa: Fix io regions
  xtensa: Add support for the Sonic Ethernet device for the XT2000 board.
  xtensa: replace remaining __FUNCTION__ occurrences
  xtensa: use newer __SPIN_LOCK_UNLOCKED macro
  XTENSA: warn about including <asm/rwsem.h> directly.

page_cgroup_init() is called from mem_cgroup_init(). But at this
point, we cannot call alloc_bootmem().
(and this caused panic at boot.)

This patch moves page_cgroup_init() to init/main.c.

Time table is following:
==
  parse_args(). # we can trust mem_cgroup_subsys.disabled bit after this.
  ....
  cgroup_init_early()  # "early" init of cgroup.
  ....
  setup_arch()         # memmap is allocated.
  ...
  page_cgroup_init();
  mem_init();   # we cannot call alloc_bootmem after this.
  ....
  cgroup_init() # mem_cgroup is initialized.
==

Before page_cgroup_init(), mem_map must be initialized. So,
I added page_cgroup_init() to init/main.c directly.

(*) maybe this is not very clean but
    - cgroup_init_early() is too early
    - in cgroup_init(), we have to use vmalloc instead of alloc_bootmem().
    use of vmalloc area in x86-32 is important and we should avoid very large
    vmalloc() in x86-32. So, we want to use alloc_bootmem() and added page_cgroup_init()
    directly to init/main.c

[akpm@linux-foundation.org: remove unneeded/bad mem_cgroup_subsys declaration]
[akpm@linux-foundation.org: fix build]
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Tested-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The __log_wait_for_space function sits in a loop checkpointing
transactions until there is sufficient space free in the journal.
However, if there are no transactions to be processed (e.g.  because the
free space calculation is wrong due to a corrupted filesystem) it will
never progress.

Check for space being required when no transactions are outstanding and
abort the journal instead of endlessly looping.

This patch fixes the bug reported by Sami Liedes at:
http://bugzilla.kernel.org/show_bug.cgi?id=10976Signed-off-by: Duane Griffin <duaneg@dghda.com>
Tested-by: Sami Liedes <sliedes@cc.hut.fi>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

__try_to_free_cp_buf(), __process_buffer(), and __wait_cp_io() test
BH_Uptodate flag to detect write I/O errors on metadata buffers.  But by
commit 95450f5a "ext3: don't read inode
block if the buffer has a write error"(*), BH_Uptodate flag can be set to
inode buffers with BH_Write_EIO in order to avoid reading old inode data.
So now, we have to test BH_Write_EIO flag of checkpointing inode buffers
instead of BH_Uptodate.  This patch does it.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If the journal has aborted due to a checkpointing failure, we have to
keep the contents of the journal space.  Otherwise, the filesystem will
lose uncheckpointed metadata completely and become inconsistent.  To
avoid this, we need to keep needs_recovery flag if checkpoint has
failed.

With this patch, ext3_put_super() detects a checkpointing failure from
the return value of journal_destroy(), then it invokes ext3_abort() to
make the filesystem read only and keep needs_recovery flag.  Errors
from journal_flush() are also handled by this patch in some places.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When a checkpointing IO fails, current JBD code doesn't check the error
and continue journaling.  This means latest metadata can be lost from both
the journal and filesystem.

This patch leaves the failed metadata blocks in the journal space and
aborts journaling in the case of log_do_checkpoint().  To achieve this, we
need to do:

1. don't remove the failed buffer from the checkpoint list where in
   the case of __try_to_free_cp_buf() because it may be released or
   overwritten by a later transaction
2. log_do_checkpoint() is the last chance, remove the failed buffer
   from the checkpoint list and abort the journal
3. when checkpointing fails, don't update the journal super block to
   prevent the journaled contents from being cleaned.  For safety,
   don't update j_tail and j_tail_sequence either
4. when checkpointing fails, notify this error to the ext3 layer so
   that ext3 don't clear the needs_recovery flag, otherwise the
   journaled contents are ignored and cleaned in the recovery phase
5. if the recovery fails, keep the needs_recovery flag
6. prevent cleanup_journal_tail() from being called between
   __journal_drop_transaction() and journal_abort() (a race issue
   between journal_flush() and __log_wait_for_space()
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In the case where procfs is disabled, create_proc_profile() does not
exist. Stub it in with the others.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_cgroup.c: In function 'init_section_page_cgroup':
mm/page_cgroup.c:111: error: implicit declaration of function 'vmalloc_node'
mm/page_cgroup.c:111: warning: assignment makes pointer from integer without a cast
mm/page_cgroup.c: In function '__free_page_cgroup':
mm/page_cgroup.c:140: error: implicit declaration of function 'vfree'
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (53 commits)
  powerpc: Support for relocatable kdump kernel
  powerpc: Don't use a 16G page if beyond mem= limits
  powerpc: Add del_node() for early boot code to prune inapplicable devices.
  powerpc: Further compile fixup for STRICT_MM_TYPECHECKS
  powerpc: Remove empty #else from signal_64.c
  powerpc: Move memory size print into common show_cpuinfo for 32-bit
  hvc_console: Remove __devexit annotation of hvc_remove()
  hvc_console: Add support for tty window resizing
  hvc_console: Fix loop if put_char() returns 0
  hvc_console: Add tty driver flag TTY_DRIVER_RESET_TERMIOS
  hvc_console: Add a hangup notifier for backends
  powerpc/83xx: Add DS1339 RTC support for MPC8349E-mITX boards .dts
  powerpc/83xx: Add support for MCU microcontroller in .dts files
  powerpc/85xx: Move mpc8572ds.dts to address-cells/size-cells = <2>
  of/spi: Support specifying chip select as active high via device tree
  powerpc: Remove device_type = "board_control" properties in .dts files
  i2c-cpm: Suppress autoprobing for devices
  powerpc/85xx: Fix mpc8536ds dma interrupt numbers
  powerpc/85xx: Enable enhanced functions for 8536 TSEC
  powerpc: Delete unused prom_strtoul and prom_memparse
  ...

* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: (47 commits)
  uwb: wrong sizeof argument in mac address compare
  uwb: don't use printk_ratelimit() so often
  uwb: use kcalloc where appropriate
  uwb: use time_after() when purging stale beacons
  uwb: add credits for the original developers of the UWB/WUSB/WLP subsystems
  uwb: add entries in the MAINTAINERS file
  uwb: depend on EXPERIMENTAL
  wusb: wusb-cbaf (CBA driver) sysfs ABI simplification
  uwb: document UWB and WUSB sysfs files
  uwb: add symlinks in sysfs between radio controllers and PALs
  uwb: dont tranmit identification IEs
  uwb: i1480/GUWA100U: fix firmware download issues
  uwb: i1480: remove MAC/PHY information checking function
  uwb: add Intel i1480 HWA to the UWB RC quirk table
  uwb: disable command/event filtering for D-Link DUB-1210
  uwb: initialize the debug sub-system
  uwb: Fix handling IEs with empty IE data in uwb_est_get_size()
  wusb: fix bmRequestType for Abort RPipe request
  wusb: fix error path for wusb_set_dev_addr()
  wusb: add HWA host controller driver
  ...