Avoids declaring local variables used only once in
the function. This preserve a register allocation thus
avoiding extra MOVs from happening.
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Can't call non-init data from init funtions. Change sdp3430_config
to __initdata.
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch adds support for the SHA1/MD5 hw module acceleration on
OMAP2420.

TODO:
- Add DMA transfer.
- Add support for OMAP1, OMAP2430, OMAP3.
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch adds the base address and interruption on header files for the
OMAP security hw module acceleration.
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Making code more compliant to CodingStyle.
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Making code more compliant to CodingStyle, also remove
unneeded goto clauses in twl_init_irq.

goto's will generate extra branch instructions before exiting
from the function; instead, exits earlier to avoid such branch
instructions.
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Replace <SPACE> with <TAB> in drivers/i2c/chips/Makefile
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

MUSB support for OMAP34XX
This depends on the previous two patches:
[PATCH 1/3] Add support for USB on OMAP34XX
[PATCH 2/3] Add support for TWL4030 USB Transceiver on OMAP34xx
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Nishant Kamat <nskamat@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Added support for TWL4030 USB transceiver chip.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Nishant Kamat <nskamat@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Added support for USB on OMAP34XX.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Nishant Kamat <nskamat@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The 3430SDP uses the same panel as the 2430SDP.  The main difference
are in the GPIO lines used for panel enable and backlight, and the
VAUX register/commands sent to the TWL4030 power subsystem.

Also, some misc. whitespace cleanups.
Signed-off-by: Kevin Hilman <khilman@mvsita.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

OMAP3 has slightly different clock names for the DSS clocks.
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Both DSS L3 and L4 interface clocks are controlled by the same bit.
Just use a single clock node to control them, and rename it to dss_ick
as is done for 24xx.
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch removes omap_sram_idle() that is no longer used.

The function called in pm_idle is omap_sram_suspend, omap_sram_idle() is
not used anywhere in omap1.
Signed-off-by: Vivek Kutal <vivek.kutal@celunite.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The DMA receive path in the MUSB driver does not update the fields in
the URB for ISO end points (the PIO path does, however). This patch
updates the fields in the URB for the DMA path. Drivers using ISO endpoints
will not see any valid data without those fields since the USB core initializes
them to be zero/error.

Tested with on the 2430SDP with a USB bluetooth dongle and SCO audio
recording and playback.

This implements the ISO URB handling for the DMA rx case by providing the
appropriate length and status in the struct usb_iso_packet_descriptor field of
the URB. Previously, this was only done in the PIO case.
Signed-off-by: Hunyue Yau <hyau@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The gpio request is done by gpio-keys
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

OMAP_GPIO_IRQ was used as OMAP_GPIOIRQ on H2 and H4 board files.
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch fixes bug #9581 reported by Marcio Buss. If kzalloc fails,
omap_i2c_write_reg() tries to reset an unallocated I2C controller.

Cc: Marcio Buss <marciobuss@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

These were left out of commit 0ed10653.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Based on David Brownell's patch for tps65010, this patch
finish conversting isp1301_omap.c to new-style i2c driver.
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Based on David Brownell's patch for tps65010, this patch
starts converting isp1301_omap.c to new-style i2c driver.
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fixing the style comments for arch/arm/mach-omap*/* files.
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Removing duplicate headers in OMAP:
arch/arm/mach-omap1/board-palmtt.c: linux/input.h is included more than once.
arch/arm/mach-omap1/board-osk.c: linux/interrupt.h is included more than once.
arch/arm/mach-omap1/board-palmz71.c: linux/input.h is included more than once.
arch/arm/mach-omap1/board-nokia770.c: asm/arch/dsp_common.h is included more than once.
arch/arm/mach-omap1/board-nokia770.c: asm/arch/gpio.h is included more than once.
arch/arm/mach-omap2/pm.c: asm/arch/gpio.h is included more than once.
Signed-off-by: Francisco Alecrim <francisco.alecrim@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Removing unused variable and useless comment from
arch/arm/mach-omap1/board-h3-mmc.c file.
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch updates and disables the a.out bin format from
omap_h2_1610_defconfig file.
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch updates and disables the a.out bin format from
omap_h3_1710_defconfig file.
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

These are no longer used and similar conversions are provided
by the clocksource/clockevent code.
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

CONTROL_DEVCONF0 has changed to OMAP2_CONTROL_DEVCONF0. Fixes
in omap_udc.c the use of such macro.
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch does the following
	- Fixes the omap_pm_idle() code so that we enter WFI mode in idle.
	- /sys/power/sleep_while_idle is created only when 32k timer is used.
Signed-off-by: Vivek Kutal <vivek.kutal@celunite.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

OMAP has now a list at vger.
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch changes the return value of omap_dma_chain_a_transfer
to 0 on success instead of the flag 'start_dma', which wasn't really useful
for anything.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix tahvo-usb.c header from include/linux/usb_gadget.h to
include/linux/usb/gadget.h.
drivers/cbus/tahvo-usb.c:37:30: linux/usb_gadget.h: No such file or directory
Signed-off-by: Francisco Alecrim <francisco.alecrim@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge branches 'master' and 'linus'

Conflicts:

	arch/arm/kernel/entry-armv.S
	drivers/i2c/busses/i2c-omap.c

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix endless loop in cheetah_xcall_deliver().
  [SERIAL] sparc: Infrastructure to fix section mismatch bugs.

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c/isp1301_omap: Build fix
  i2c: Add missing spaces in split log messages
  i2c-gpio: Initialize adapter class
  i2c: Delete an outdated piece of documentation

We need to mask out the proper bits when testing the dispatch status
register else we can see unrelated NACK bits from previous cross call
sends.
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch against 2.6.23 sparc-2.6.git contains a number of minor
cleanups of the sparc serial drivers.  Initially I fixed this build
warning:

WARNING: vmlinux.o(.text+0x107a2c): Section mismatch: reference to .init.text:add_preferred_console (between 'sunserial_console_match' and 'sunserial_console_termios')

which is done by declaring sunserial_console_match() as __init.  This
resulted in build warnings on sunserial_current_minor.  To resolve
these the variable was changed so it is no longer global, and to hide
operations on it inside 2 new functions. These functions handle the
UART minor handling code that is common to all sparc serial drivers.

These changes allowed to clean up the uart counters in all the sparc
serial drivers, and the administration of minor device numbers.

Lastly, sunserial_console_termios() does not need to be exported since
it is only called from non-modular code.

Sadly, the following build warning still exists:

WARNING: vmlinux.o(__ksymtab+0x2910): Section mismatch: reference to .init.text:sunserial_console_match (between '__ksymtab_sunserial_console_match' and '__ksymtab_sunserial_unregister_minors')

This could be resolved by not exporting sunserial_console_match(), but
this is not possible at the moment because it is being called from
modular code. On the other hand, this is a bogus warning since it
comes from a ksymtab section.
Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Build fix to the isp1301_omap driver ... this driver gets built
more often in the OMAP tree than in mainline, partly because the
defconfig for H2 (plus probably H3 and H4) needs updating.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>