Skip to content

L
linux-davinci
Switch branch/tag
  1. 02 Jun, 2008 3 commits
    • Paul Mundt's avatar
      sh: fix miscompilation of ip_fast_csum with gcc >= 4.3 · d02d6be5
      Paul Mundt authored 
      As noted by Matthew Wilcox:

    Kyle McMartin just tracked down a bug on parisc to a missing
    "memory" clobber in the inline assembly implementation of
    ip_fast_csum.  The FRV, SH and Xtensa ports are also missing a
    memory clobber, so I thought it would be polite to let you know.

    The bug manifests as dropped network packets (obviously they have
    the wrong checksum).  It started appearing for parisc with GCC 4.3.

    The GCC manual says:

     If your assembler instructions access memory in an unpredictable
     fashion, add `memory' to the list of clobbered registers.  This
     will cause GCC to not keep memory values cached in registers
     across the assembler instruction and not optimize stores or loads
     to that memory.

    I see that FRV has a 400 byte memory output which may prevent this
    problem from appearing, but SH and Xtensa have nothing to prevent
    this bug.  Hope this saves you a few days of debugging.
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
      d02d6be5
    • Harvey Harrison's avatar
      sh: module.c use kernel unaligned helpers · 1f9d2949
      Harvey Harrison authored 
      Replace the COPY_UNALIGNED_WORD helper.
Signed-off-by: default avatarHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
      1f9d2949
    • Adrian Bunk's avatar
      sh/kernel/cpu/irq/intc-sh5.c build fix · 2beb0e28
      Adrian Bunk authored 
      This patch fixes the following build error caused by
commit a1dc4b59
(sh: intc_sh5 depends on cayman board for IRQ priority table.):

<--  snip  -->

...
  CC      arch/sh/kernel/cpu/irq/intc-sh5.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/kernel/cpu/irq/intc-sh5.c: In function 'plat_irq_setup':
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/kernel/cpu/irq/intc-sh5.c:257: error: expected declaration or statement at end of input
make[4]: *** [arch/sh/kernel/cpu/irq/intc-sh5.o] Error 1

<--  snip  -->
Reported-by: default avatarAdrian Bunk <bunk@kernel.org>
Signed-off-by: default avatarAdrian Bunk <bunk@kernel.org>
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
      2beb0e28
  3. 30 May, 2008 20 commits
  5. 29 May, 2008 17 commits
    • Li Yang's avatar
      USB: fsl_usb2_udc: fix recursive lock · 185e3dea
      Li Yang authored 
      UDC needs to release lock before calling out to gadget driver, since
it may need to reenter.  The change fixes kernel BUG observed on rt
kernel.

> kernel BUG at kernel/rtmutex.c:683!
> stopped custom tracer.
> Oops: Exception in kernel mode, sig: 5 [#1]
> PREEMPT MPC834x ITX
> NIP: c021629c LR: c0216270 CTR: 00000000
> REGS: df761d70 TRAP: 0700   Not tainted  (2.6.23.9-rt13)
> MSR: 00021032 <ME,IR,DR>  CR: 28000022  XER: 00000000
> TASK = df632080[241] 'IRQ-38' THREAD: df760000
> GPR00: 00000001 df761e20 df632080 00000000 11111111 00000000 df761e6c
> 00000000
> GPR08: df761e48 00000000 df761e50 00000000 80000000 ede5cdde 1fffd000
> 00800000
> GPR16: ffffffff 00000000 007fff00 00000040 00000000 007ffeb0 00000000
> 1fff8b08
> GPR24: 00000000 00000026 00000000 df79a320 c026b2e8 c02240bc 00009032
> df79a320
> NIP [c021629c] rt_spin_lock_slowlock+0x9c/0x200
> LR [c0216270] rt_spin_lock_slowlock+0x70/0x200
> Call Trace:
> [df761e20] [c0216270] rt_spin_lock_slowlock+0x70/0x200 (unreliable)
> [df761e90] [c0182828] fsl_ep_disable+0xcc/0x154
> [df761eb0] [c0184d30] eth_reset_config+0x88/0x1d0
> [df761ed0] [c0184ec0] eth_disconnect+0x48/0x64
> [df761ef0] [c01831a4] reset_queues+0x60/0x78
> [df761f00] [c0183b74] fsl_udc_irq+0x9b8/0xa58
> [df761f50] [c003ef30] handle_IRQ_event+0x64/0x100
> [df761f80] [c003f758] thread_simple_irq+0x6c/0xc8
> [df761fa0] [c003f888] do_irqd+0xd4/0x2e4
> [df761fd0] [c0032284] kthread+0x50/0x8c
> [df761ff0] [c000f9b4] kernel_thread+0x44/0x60
Signed-off-by: default avatarLi Yang <leoli@freescale.com>
Cc: Eugene T. Bordenkircher <Eugene_Bordenkircher@selinc.com>
Acked-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      185e3dea
    • Michael Karcher's avatar
      USB: usb-serial: option: Don't match Huawei driver CD images · a7f3872c
      Michael Karcher authored 
      Add the interface info matching to all Huawei cards, as they all also
contain a Mass Storage Device interface (usually containing Windows
drivers) which should not get bound by this driver.

See also drivers/usb/storage/unusual_devs.h
Signed-off-by: default avatarMichael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      a7f3872c
    • Steve Murphy's avatar
      USB: pl2303: another product ID · 4be2fa18
      Steve Murphy authored 
      I've just got a USB GPRS/EDGE modem branded Manufacturer Micromax Model
MMX610U (see http://www.airtel.in/level2_t3data.aspx?path=1/106/179)
working by adding another product ID to pl2303.  Modem info reports same
module as  Max Arnold's i.e.SIMCOM SIM600  but  with product ID 0x0612
(cf Ox0611).

From: Steve Murphy <steve@gnusis.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      4be2fa18
    • René Rebe's avatar
      USB: add another scanner quirk · 598eff6d
      René Rebe authored 
      Like the HP53{00,70} scanner other devices of the OEM Avision require
the USB_QUIRK_STRING_FETCH_255 to correct set a configuration with
"recent" Linux kernels.
Signed-off-by: default avatarRené Rebe <rene@exactcode.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      598eff6d
    • Javier Smaldone's avatar
      USB: Add support for ROKR W5 in unusual_devs.h · 2a8bc9e7
      Javier Smaldone authored 
      This patch adds support for rev 2 of an existing unusual_devs entry
enabling ROKR W5s to work. Greg, please apply.

From: Javier Smaldone <javier@smaldone.com.ar>
Signed-off-by: default avatarPhil Dibowitz <phil@ipom.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      2a8bc9e7
    • Phil Dibowitz's avatar
      USB: Fix M600i unusual_devs entry · c5f23b0e
      Phil Dibowitz authored 
      It turns out that the unusual_devs entry for the Motorola M600i needs
another flag. This patch adds it. Thanks to Atte André Jensen
<atte@ballbreaker.dk>.
Signed-off-by: default avatarPhil Dibowitz <phil@ipom.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      c5f23b0e
    • Alan Stern's avatar
      USB: usb-storage: unusual_devs update for Cypress ATACB · c7257bd2
      Alan Stern authored 
      This patch (as1101) updates the unusual_devs entry for the Cypress
ATACB pass-through.  The protocol field is changed from US_PR_BULK to
US_PR_DEVICE, since the Cypress devices already set bInterfaceProtocol
to Bulk-only.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      c7257bd2
    • Alan Stern's avatar
      USB: EHCI: fix performance regression · fa38dfcc
      Alan Stern authored 
      This patch (as1099) fixes a performance regression in ehci-hcd.  The
fundamental problem is that queue headers get removed from the
schedule too quickly, since the code checks for a counter advancing
rather than making an actual time-based check.  The latency involved
in removing the queue header and then relinking it can severely
degrade certain kinds of workloads.

The patch replaces a simple counter with a timestamp derived from the
controller's uframe value.  In addition, the delay for unlinking an
idle queue header is increased from 5 ms to 10 ms; since some
controllers (nVidia) have a latency of up to 1 ms for unlinking, this
reduces the relative impact from 20% to 10%.

Finally, a logical error left over from the IAA watchdog-timer
conversion is corrected.  Now the driver will always either unlink an
idle queue header or set up a timer to unlink it later.  The old code
would sometimes fail to do either.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <david-b@pacbell.net>
Cc: Leonid <leonidv11@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      fa38dfcc
    • Alan Stern's avatar
      USB: EHCI: fix bug in Iso scheduling · b40e43fc
      Alan Stern authored 
      This patch (as1098) changes the way ehci-hcd schedules its periodic
Iso transfers.  That the current scheduling code is wrong is clear on
the face of it: Sometimes it returns -EL2NSYNC (meaning that an URB
couldn't be scheduled because it was submitted too late), but it does
this even when the URB_ISO_ASAP flag is set (meaning the URB should be
scheduled as soon as possible).

The new code properly implements as-soon-as-possible scheduling,
assigning the next unexpired slot as the URB's starting point.  It
also is more careful about checking for Iso URB completion: It doesn't
bother to check for activity during frames that are already over,
and it allows for the possibility that some of the URB's packets may
have raced the hardware when they were submitted and so never got used
(the packet status is set to -EXDEV).

This fixes problems several people have experienced with USB video
applications.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Acked-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      b40e43fc
    • Alan Stern's avatar
      USB: EHCI: fix remote-wakeup regression · d1f114d1
      Alan Stern authored 
      This patch (as1097) fixes a bug in the remote-wakeup handling in
ehci-hcd.  The driver currently does not keep track of whether the
change-suspend feature is enabled for each port; the feature is
automatically reset the first time it is read.  But recent changes to
the hub driver require that the feature be read at least twice in
order to work properly.

A bit-vector is added for storing the change-suspend feature values.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Acked-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      d1f114d1
    • Alan Stern's avatar
      USB: EHCI: suppress unwanted error messages · 3a31155c
      Alan Stern authored 
      This patch (as1096) fixes an annoying problem: When a full-speed or
low-speed device is plugged into an EHCI controller, it fails to
enumerate at high speed and then is handed over to the companion
controller.  But usbcore logs a misleading and unwanted error message
when the high-speed enumeration fails.

The patch adds a new HCD method, port_handed_over, which asks whether
a port has been handed over to a companion controller.  If it has, the
error message is suppressed.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      3a31155c
    • Alan Stern's avatar
      USB: EHCI: fix up root-hub TT mess · a8e51775
      Alan Stern authored 
      This patch (as1095) cleans up the HCD glue and several of the EHCI
bus-glue files.  The ehci->is_tdi_rh_tt flag is redundant, since it
means the same thing as the hcd->has_tt flag, so it is removed and the
other flag used in its place.

Some of the bus-glue files didn't get the relinquish_port method added
to their hc_driver structures.  Although that routine currently
doesn't do anything for controllers with an integrated TT, in the
future it might.  So the patch adds it where it is missing.

Lastly, some of the bus-glue files have erroneous entries for their
hc_driver's suspend and resume methods.  These method pointers are
specific to PCI and shouldn't be used otherwise.

(The patch also includes an invisible whitespace fix.)
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Acked-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
      a8e51775
    • Alan Stern's avatar
      USB: add all configs to the "descriptors" attribute · 217a9081
      Alan Stern authored 
      This patch (as1094) changes the output of the "descriptors" binary
attribute.  Now it will contain the device descriptor followed by all
the configuration descriptors, not just the descriptor for the current
config.

Userspace libraries want to have access to the kernel's cached
descriptor information, so they can learn about device characteristics
without having to wake up suspended devices.  So far the only user of
this attribute is the new libusb-1.0 library; thus changing its
contents shouldn't cause any problems.

This should be considered for 2.6.26, if for no other reason than to
minimize the range of releases in which the attribute contains only the
current config descriptor.

Also, it doesn't hurt that the patch removes the device locking --
which was formerly needed in order to know for certain which config was
indeed current.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      217a9081
    • Alan Stern's avatar
      USB: fix possible deadlock involving sysfs attributes · e16362a0
      Alan Stern authored 
      There is a potential deadlock when the usb_generic driver is unbound
from a device.  The problem is that generic_disconnect() is called
with the device lock held, and it removes a bunch of device attributes
from sysfs.  If a user task happens to be running an attribute method
at the time, the removal will block until the method returns.  But at
least one of the attribute methods (the store routine for power/level)
needs to acquire the device lock!

This patch (as1093) eliminates the deadlock by moving the calls to
create and remove the sysfs attributes from the usb_generic driver
into usb_new_device() and usb_disconnect(), where they can be invoked
without holding the device lock.

Besides, the other sysfs attributes are created when the device is
registered and removed when the device is unregistered.  So it seems
only fitting for the extra attributes to be created and removed at the
same time.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      e16362a0
    • Matthew Garrett's avatar
      USB: Firmware loader driver for USB Apple iSight camera · 62d104d0
      Matthew Garrett authored 
      Uninitialised Apple iSight drivers present with a distinctive USB ID.
Once firmware has been uploaded, they disconnect and reconnect with a
new ID. At this point they can be driven by the uvcvideo driver. As this
is unique to the Apple cameras and not functionality shared by any other
UVC devices, it makes sense to provide the firmware loading
functionality in a separate driver. This driver will read an isight.fw
file extracted from the Apple driver using the tools at
http://bersace03.free.fr/ift/ and upload it to the camera. It will also
handle the case where the device loses its firmware during hibernation
and must have it reloaded.
Signed-off-by: default avatarMatthew Garrett <mjg@redhat.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      62d104d0
    • Ray Molenkamp's avatar
      USB: FTDI_SIO : Add support for Matrix Orbital PID Range · ebb3770c
      Ray Molenkamp authored 
      This patch adds support for the range of PIDs
that have been allocated for FTDI based devices
at Matrix Orbital.

A small number of units have been shipped early 2008
with a faulty USB Descriptor.  Products that may have
this issue have been marked with the existing quirk to
work around the problem.
Signed-off-by: default avatarR. Molenkamp <rmolenkamp@matrixorbital.ca>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      ebb3770c
    • Linus Torvalds's avatar
      Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq · 4bd27972
      Linus Torvalds authored 
      * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] fix double unlock of cpu_policy_rwsem in drivers/cpufreq/cpufreq.c
      4bd27972