- 13 Nov, 2008 5 commits
-
-
Takashi Iwai authored
Conflicts: sound/pci/hda/patch_sigmatel.c
-
Takashi Iwai authored
Added a NULL check of input_allocate_device() in hda_beep.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The digital beep widget may have no mute control, and always enabling the beep is ofen pretty annoying, especially on laptops. This patch adds a mixer control "PC Beep Playback Switch" when there is no mixer amp mute is found, and controls it on software. Reference: Novell bnc#444572 https://bugzilla.novell.com/show_bug.cgi?id=444572Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Yang, Libin authored
The patch uses HD Audio PCI class code to detect AMD HD Audio cards. Signed-off-by: Libin Yang <libin.yang@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wu Fengguang authored
Move the handling of SiI1392 HDMI codec from patch_atihdmi.c to patch_intelhdmi.c, which makes our ASUS P5E-VM HDMI board work. Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 12 Nov, 2008 2 commits
-
-
Takashi Iwai authored
Conflicts: sound/pci/hda/patch_sigmatel.c
-
Takashi Iwai authored
Due to the recent change for multiple HP as line-out switch, only one of the multiple headphons (usually a wrong one) is toggled and the other pins are still disabled. This causes the silent output problem on some Dell laptops. Also, the hp_switch check is screwed up when a line-in or a mic-in jack exists. This is added as an additional output, but hp_switch check doesn't take it into account. This patch fixes these issues: simplify hp_switch check by using the NID instead of bool, and clean up / fix the toggle of HP pins in unsol event handler code. Reference: Novell bnc#443267 https://bugzilla.novell.com/show_bug.cgi?id=443267Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 11 Nov, 2008 2 commits
-
-
Takashi Iwai authored
The input pins are sometimes not initialized properly because of the optimization check of the current pinctl code. Force to initialize the mic input pins so that they can be set up properly even if they were in a weird state. But keep other input pins if already set up as input, since this could be an extra mic pin. Reference: Novell bnc#443738 https://bugzilla.novell.com/show_bug.cgi?id=443738Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The creation of analog-mux mixer element is missing in patch_stac9200() due to the dynamic allocation patch. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 10 Nov, 2008 2 commits
-
-
Travis Place authored
Added a QUIRK to patch_analog.c for the HP Elitebook 8530p (IDs 0x103c:0x30e7) to use AD1884A model 'laptop' by default. Playback and Capture confirmed working. Signed-off-by: Travis Place <wishie@wishie.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Fix another silly bug in the amp cache list management. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 09 Nov, 2008 1 commit
-
-
Michel Marti authored
Added model=laptop for another HP machine (103c:3614) with AD1884A codec. Signed-off-by: Michel Marti <mma@objectxp.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 07 Nov, 2008 3 commits
-
-
Takashi Iwai authored
BIOS on Dell Studio Desktop tells wrong codec probe masks. This patch gives the preset mask value to avoid invalid access. Reference: Novell bug#440907 https://bugzilla.novell.com/show_bug.cgi?id=440907Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The master switch doesn't influence on NID 0x15, the headphone jack on HP 3013 model because alc260_hp_master_update() ignores the passed arguments. Also, corrected the wrong arguments of hp3013 (0x10 and 0x15) although this doesn't change any behavior. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
- 06 Nov, 2008 6 commits
-
-
Takashi Iwai authored
The chaining for amp hash got broken due to the rewrite with snd_array. Fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Added a check for max allocation size in snd_array_new() for a debugging purpose. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Added the missing NULL check from allocator in get_alloc_hash(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Tony Vroon authored
The widget layout of the Fujitsu Lifebook S6420 (which is ICH9M-based and uses an ALC269) is similar but not identical to the Lifebook S6410/E8410 (which are ICH8M-based and use an ALC262). It is named lifebook as fujitsu is in use for Amilo machines. This builds on the Quanta FL1 work and supports all analog inputs & outputs that I am aware of. Microphone autoswitch is implemented. The laptop mic port takes precedence over the dock mic port if both happen to have a jack plugged in. This made sense to me as a design decision (imagine a presentation environment with the dock fully wired in and the presenter quickly wanting to override the mic with a headset). There is mention of a digital audio path on the codec graph, so perhaps the headphone socket is dual-function analog/digital. I will follow up with another patch if I can acquire equipment to test this. Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
When an error occurs during the codec probing, typically accessing to an non-existing codec slot, the controller chip gets often screwed up and can no longer communicate with the codecs. This patch adds a preparation phase just to probe codec addresses before actually creating codec instances. If any error occurs during this probing phase, the driver resets the controller to recover. This will (hopefully) fix the famous "single_cmd" errors. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The hda_bus ops callback take struct hda_bus pointer. Also, the command callback takes the composed command word, instead of each small bits in arguments. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 05 Nov, 2008 5 commits
-
-
Takashi Iwai authored
There are actually two variants of ALC268 Acer implementation, one with an analog built-in mic (pin 0x19) and another with a digital mic (pin 0x12). Created a new model, acer-dmic, for the latter case now. So far, all known models are assigned to be analog-mic, according to the BIOS setup. If this doesn't match with the actual case, one needs to try model=acer-dmic, and fix the entry to point ALC268_ACER_DMIC if it works. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Use model=lenovo-ms7195-dig for MEDION MD96630 laptop (17c0:4085) with ALC888 codec. Reference: Novell bnc#412548 https://bugzilla.novell.com/show_bug.cgi?id=412528Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Asus V1s series laptops have an ALC660VD with PCI id: 0x1043, 0x1633. 1.) remove the previous behaviour of mapping that to the ALC861VD_LENOVO device. 2.) add a new ALC660VD_V1S device based on ALC861VD_LENOVO, with an added digital out. Signed-off-by: Tristan Aston <astrotris@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Add a proper ifdef to shut out a compile warning: CC [M] sound/pci/hda/patch_intelhdmi.o sound/pci/hda/patch_intelhdmi.c:286: warning: ‘hdmi_get_dip_index’ defined but \ not used Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Wu, Fengguang authored
Add support for Intel G45 integrated HDMI audio codecs. This initial release supports: - 2 channel stereo sound output - report monitor's ELD information Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 04 Nov, 2008 3 commits
-
-
Takashi Iwai authored
Due to the hda-reconfiguration patches, the check of empty stream is gone, and this results in an error with the codec setup with empty streams. This patch adds the check again to avoid the error at probing. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Limit the number of GPIOs shown in proc. Otherwise it gets too long unnecessarily, and hard to analyze. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Add NULL-check of the return value of snd_kctl_new1() before accessing it. Also, make a sanity NULL check to snd_BUG_ON() for debugging only. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 03 Nov, 2008 4 commits
-
-
Takashi Iwai authored
The commit f9e336f6 ALSA: hda - Unify capture mixer creation in realtek codes removed the ADC check for ALC260 auto-probe mode accidentally. Re-added to patch_alc260() again. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Added a preset model for FSC Amilo with ALC269 codec chip. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Matthew Ranostay authored
Add support for explicitly enabling the EQ distortion hack for systems without software biquad support. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Added a quirk for another Acer Aspier laptop (1025:0090) with ALC883 codec. Reported in Novell bnc#426935: https://bugzilla.novell.com/show_bug.cgi?id=426935Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 31 Oct, 2008 7 commits
-
-
Takashi Iwai authored
Re-added again "Input Source" control that was removed mistakenly in the previous patchset. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Unified the capture mixer creation in patch_realtek.c. ALC268 is still an exception since it has no AMP in ADC but in MUX widget. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Unify the capture callbacks in patch_realtek.c. The difference of matrix or mux style is checked via spec->is_mix_capture flag. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Use macro to add mixer and verb elements to check the possible array overflow. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
Takashi Iwai authored
The digital mic wasn't detected properly for ALC269 auto-probing mode because of its widget number. Fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The recent addition of automatic mic-muting is broken in some cases. The code assumes that the pin nids <= 0x18, but the digital pins can be less than 0x18. Also, it assumes the front-mic being the internal mic, but it depends on the hardware implementation actually. Instead of complex case-fixes, better to disable the code as now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-