* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (367 commits)
  ALSA: ASoC: fix a typo in omp-pcm.c
  ASoC: Fix DSP formats in SSM2602 audio codec
  ASoC: Fix incorrect DSP format in OMAP McBSP DAI and affected drivers
  ALSA: hda: fix incorrect mixer index values for 92hd83xx
  ALSA: hda: dinput_mux check
  ALSA: hda - Add quirk for another HP dv7
  ALSA: ASoC - Add missing __devexit annotation to wm8350.c
  ALSA: ASoc: DaVinci: davinci-evm use dsp_b mode
  ALSA: ASoC: DaVinci: i2s, evm, pass same value to codec and cpu_dai
  ALSA: ASoC: tlv320aic3x add dsp_a
  ALSA: ASoC: DaVinci: document I2S limitations
  ALSA: ASoC: DaVinci: davinci-i2s clean up
  ALSA: ASoC: DaVinci: davinci-i2s clean up
  ALSA: ASoC: DaVinci: davinci-i2s add comments to explain polarity
  ALSA: ASoC: DaVinci: davinvi-evm, make requests explicit
  ALSA: ca0106 - disable 44.1kHz capture
  ALSA: ca0106 - Add missing card->private_data initialization
  ALSA: ca0106 - Check ac97 availability at PM
  ALSA: hda - Power up always when no jack detection is available
  ALSA: hda - Fix unused variable warnings in patch_sigmatel.c
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (132 commits)
  sh: oprofile: Fix up the module build.
  sh: add UIO support for JPU on SH7722.
  serial: sh-sci: Fix up port pinmux for SH7366.
  sh: mach-rsk: Use uImage generation by default for rsk7201/7203.
  sh: mach-sh03: Fix up pata_platform build breakage.
  sh: enable deferred io LCDC on Migo-R
  video: sh_mobile_lcdcfb deferred io support
  video: deferred io with physically contiguous memory
  video: deferred io cleanup
  video: fix deferred io fsync()
  sh: add LCDC interrupt configuration to AP325 and Migo-R
  sh_mobile_lcdc: use FB_SYS helpers instead of FB_CFB
  sh: split coherent pages
  sh: dma: Kill off ISA DMA wrapper.
  sh: Conditionalize the code dumper on CONFIG_DUMP_CODE.
  sh: Kill off the unused SH_ALPHANUMERIC debug option.
  sh: Enable skipping of bss on debug platforms for sh32 also.
  doc: Update sh cpufreq documentation.
  sh: mrshpc_setup_windows() needs to be inline.
  serial: sh-sci: sci_poll_get_char() is only used by CONFIG_CONSOLE_POLL.
  ...

Happy holidays..

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB (9920): em28xx: fix NULL pointer dereference in call to VIDIOC_INT_RESET command
  V4L/DVB (9908a): MAINTAINERS: mark linux-uvc-devel as subscribers only
  V4L/DVB (9906): v4l2-compat: test for unlocked_ioctl as well.
  V4L/DVB (9885): drivers/media Kconfig's: fix bugzilla #12204
  V4L/DVB (9875): gspca - main: Fix vidioc_s_jpegcomp locking.
  V4L/DVB (9781): [PATCH] Cablestar 2 I2C retries (fix CableStar2 support)
  V4L/DVB (9780): dib0700: Stop repeating after user stops pushing button

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: disable X86_PTRACE_BTS

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Add missing terminators in patch_sigmatel.c

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

there's a new ptrace arch level feature in .28:

  config X86_PTRACE_BTS
  bool "Branch Trace Store"

it has broken fork() handling: the old DS area gets copied over into
a new task without clearing it.

Fixes exist but they came too late:

  c5dee617: x86, bts: memory accounting
  bf53de90: x86, bts: add fork and exit handling

and are queued up for v2.6.29. This shows that the facility is still not
tested well enough to release into a stable kernel - disable it for now and
reactivate in .29. In .29 the hardware-branch-tracer will use the DS/BTS
facilities too - hopefully resulting in better code.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

flush_tlb_mm's "optimized" uniprocessor case of allocating a new
context for userspace is exposing a race where we can suddely return
to a syscall with the protection id and space id out of sync, trapping
on the next userspace access.
Debugged-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: fix correctness of irq_enabled check for radeon.

When deleting an edac device, we have to wait for its edac_dev.work to be
completed before deleting the whole edac_dev structure.  Since we have no
idea which work in current edac_poller's workqueue is the work we are
conerned about, we wait for all work in the edac_poller's workqueue to be
proceseed.  This is done via flush_cpu_workqueue() which inserts a
wq_barrier into the tail of the workqueue and then sleeping on the
completion of this wq_barrier.  The edac_poller will wake up sleepers when
it is found.

EDAC core creates only one kernel worker thread, edac_poller, to run the
works of all current edac devices.  They share the same callback function
of edac_device_workq_function(), which would grab the mutex of
device_ctls_mutex first before it checks the device.  This is exactly
where edac_poller and rmmod would have a great chance to deadlock.

In below call trace of rmmod > ... >
edac_device_del_device >
edac_device_workq_teardown > flush_workqueue > flush_cpu_workqueue,

device_ctls_mutex would have already been grabbed by
edac_device_del_device().  So, on one hand rmmod would sleep on the
completion of a wq_barrier, holding device_ctls_mutex; on the other hand
edac_poller would be blocked on the same mutex when it's running any one
of works of existing edac evices(Note, this edac_dev.work is likely to be
totally irrelevant to the one that is being removed right now)and never
would have a chance to run the work of above wq_barrier to wake rmmod up.

edac_device_workq_teardown() should not be called within the critical
region of device_ctls_mutex.  Just like is done in edac_pci_del_device()
and edac_mc_del_mc(), where edac_pci_workq_teardown() and
edac_mc_workq_teardown() are called after related mutex are released.

Moreover, an edac_dev.work should check first if it is being removed.  If
this is the case, then it should bail out immediately.  Since not all of
existing edac devices are to be removed, this "shutting flag" should be
contained to edac device being removed.  The current edac_dev.op_state can
be used to serve this purpose.

The original deadlock problem and the solution have been witnessed and
tested on actual hardware.  Without the solution, rmmod an edac driver
would result in below deadlock:

root@localhost:/root> rmmod mv64x60_edac
EDAC DEBUG: mv64x60_dma_err_remove()
EDAC DEBUG: edac_device_del_device()
EDAC DEBUG: find_edac_device_by_dev()

(hang for a moment)

INFO: task edac-poller:2030 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
edac-poller   D 00000000     0  2030      2
Call Trace:
[df159dc0] [c0071e3c] free_hot_cold_page+0x17c/0x304 (unreliable)
[df159e80] [c000a024] __switch_to+0x6c/0xa0
[df159ea0] [c03587d8] schedule+0x2f4/0x4d8
[df159f00] [c03598a8] __mutex_lock_slowpath+0xa0/0x174
[df159f40] [e1030434] edac_device_workq_function+0x28/0xd8 [edac_core]
[df159f60] [c003beb4] run_workqueue+0x114/0x218
[df159f90] [c003c674] worker_thread+0x5c/0xc8
[df159fd0] [c004106c] kthread+0x5c/0xa0
[df159ff0] [c0013538] original_kernel_thread+0x44/0x60
INFO: task rmmod:2062 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
rmmod         D 0ff2c9fc     0  2062   1839
Call Trace:
[df119c00] [c0437a74] 0xc0437a74 (unreliable)
[df119cc0] [c000a024] __switch_to+0x6c/0xa0
[df119ce0] [c03587d8] schedule+0x2f4/0x4d8
[df119d40] [c03591dc] schedule_timeout+0xb0/0xf4
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If cgroup_get_rootdir() failed, free_cg_links() will be called in the
failure path, but tmp_cg_links hasn't been initialized at that time.

I introduced this bug in the 2.6.27 merge window.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove spurious warning messages that are thrown onto the console during
cgroup operations.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Sharyathi Nagesh <sharyathi@in.ibm.com>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

During test of the w1-gpio driver i found that in "w1.c:679
w1_slave_found()" the device id is converted to little-endian with
"cpu_to_le64()", but its not converted back to cpu format in "w1_io.c:293
w1_reset_select_slave()".

Based on a patch created by Andreas Hummel.

[akpm@linux-foundation.org: remove unneeded cast]
Reported-by: Andreas Hummel <andi_hummel@gmx.de>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch for the rtc-isl1208 driver makes it reject invalid dates.
Signed-off-by: Chris Elston <celston@katalix.com>
[a.zummo@towertech.it: added comment explaining the check]
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Hebert Valerio Riedel <hvr@gnu.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix a NULL pointer dereference that would occur if the video decoder tied to
the em28xx supports the VIDIOC_INT_RESET call (for example: the cx25840 driver)
Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

This check was introduced with the logic the wrong way around.

Fixes regression: http://bugzilla.kernel.org/show_bug.cgi?id=12216Tested-by: François Valenduc <francois.valenduc@tvcablenet.be>
Signed-off-by: Dave Airlie <airlied@redhat.com>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: don't cond_resched() when irqs_disabled()
  ACPI: fix 2.6.28 acpi.debug_level regression

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  drivers/ide/{cs5530.c,sc1200.c}: Move a dereference below a NULL test

In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: MIPS64R2: Fix buggy __arch_swab64
  MIPS: Fix preprocessor warnings flaged by GCC 4.4

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  ppp: fix segfaults introduced by netdev_priv changes
  net: Fix module refcount leak in kernel_accept()

Fix a typo (& and &&)
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Thanks to Troy Kisky <troy.kisky@boundarydevices.com> for noticing.

- DSP_A format has 1-bit data delay which corresponds to SSM6202 submode 2
- DSP_B has 0-bit data delay which corresponds to submode 1
- Currently driver sets them opposite so swap the submode setting
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

- OMAP McBSP DAI driver claims to support DSP_A format which has 1-bit data
  delay but configures link for 0-bit data delay which is in fact DSP_B
- Fix this by changing format from DSP_A to DSP_B
- Fix also TLV320AIC23 codec and OSK5912 machine drivers since the same
  error is populated also there
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>