- 13 Aug, 2009 33 commits
-
-
Eilon Greenstein authored
The new FW improves the packets per second rate. It required a lot of change in the FW which implies many changes in the driver to support it. It is now also possible for the driver to use a separate MSI-X vector for Rx and Tx - this also add some to the complicity of this change. All things said - after this patch, practically all performance matrixes show improvement. Though Vladislav Zolotarov is not signed on this patch, he did most of the job and deserves credit for that. Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eilon Greenstein authored
Signed-off-by:
-
françois romieu authored
Synced with Realtek's 1.013.00 r8101 driver. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw> Signed-off-by:
-
françois romieu authored
Synced with Realtek's 6.011.00 r8169 driver. Signed-off-by:
-
françois romieu authored
Synced with Realtek's 6.011.00 r8169 driver. Signed-off-by:
-
françois romieu authored
Synced with Realtek's 6.011.00 r8169 driver. Signed-off-by:
-
françois romieu authored
The driver displays the same 0x18000000 xid for RTL_GIGA_MAC_VER_06 and RTL_GIGA_MAC_VER_05 whereas the former ought to be identified as 0x98000000. Signed-off-by:
-
françois romieu authored
Noticed by Vincent Pelletier <plr.vincent@gmail.com>. Signed-off-by:
-
Rémi Denis-Courmont authored
seq_open_net() and seq_release() are needed for seq_file_net(). Signed-off-by:
Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by:
-
Sathya Perla authored
Any events rcvd after interrupts are disabled (in the driver unload path), must be cleared and notified before the event queues are destroyed Signed-off-by:
Sathya Perla <sathyap@serverengines.com> Signed-off-by:
-
Sathya Perla authored
Using "for(tail != head)" to traverse a queue from tail to head fails in the case of a fully filled queue. Use "for(used != 0)" instead. Signed-off-by:
-
Sathya Perla authored
Clear pending tx completions in be_close() (ndo.stop method) so that after unregister_netdev() calls be_close(), all tx skbs are freed and there are no more tx completions when txq is destroyed. Signed-off-by:
-
Jaswinder Singh Rajput authored
fix the following 'make includecheck' warning: drivers/net/smc911x.h: mach/dma.h is included more than once. Signed-off-by:
Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by:
-
Jaswinder Singh Rajput authored
fix the following 'make includecheck' warning: include/linux/icmpv6.h: linux/skbuff.h is included more than once. Signed-off-by:
-
Brice Goglin authored
Improve myri10ge parity error detection and recovery: 1) Don't restore PCI config space to a rebooted NIC until AFTER the host is quiescent. 2) Let myri10ge_close() know the NIC is dead, so it won't waste time waiting for a dead nic to respond to MXGEFW_CMD_ETHERNET_DOWN 3) When the NIC is quiet (link down, or otherwise idle link) use a pci config space read to detect a rebooted NIC. Otherwise we might never notice that a NIC rebooted Signed-off-by:
Andrew Gallatin <gallatin@myri.com> Signed-off-by:
Brice Goglin <brice@myri.com> Signed-off-by:
-
Julia Lawall authored
request_mem_region should be used with release_mem_region, not request_region. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r2@ expression start; @@ request_mem_region(start,...) @b2@ expression r2.start; @@ request_region(start,...) @depends on !b2@ expression r2.start; expression E; @@ - release_region + release_mem_region (start,E) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Jaswinder Singh Rajput authored
fix the following 'make includecheck' warning: drivers/net/pcmcia/axnet_cs.c: linux/etherdevice.h is included more than once. Signed-off-by:
-
Jaswinder Singh Rajput authored
fix the following 'make includecheck' warning: drivers/net/cs89x0.c: asm/irq.h is included more than once. Signed-off-by:
-
Julia Lawall authored
In general in this file, it is the status field, not the state field, that contains values like OPEN and CLOSED. Indeed, in the first error case, it is the field status that is initialized. I have thus assumed that all of the error handling code should be the same, and moved it to the end of the function to emphasize its commonality. Signed-off-by:
-
Julia Lawall authored
In this series of tests the constants have the form XRXMAC_STATUS, except in this one case. The values of XRXMAC_STAT_MSK_RXOCTET_CNT_EXP and XRXMAC_STATUS_RXOCTET_CNT_EXP are furthermore the same. Signed-off-by:
-
Dmitry Baryshkov authored
Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
-
Dmitry Baryshkov authored
Signed-off-by:
-
Dmitry Baryshkov authored
Signed-off-by:
-
Dmitry Baryshkov authored
1) fix ro->bound protection by socket lock 2) make ro->bound bit instead of int Signed-off-by:
-
Dmitry Baryshkov authored
Signed-off-by:
-
Dmitry Baryshkov authored
Signed-off-by:
-
Dmitry Baryshkov authored
Signed-off-by:
-
Dmitry Baryshkov authored
IEEE802154_SIOC_ADD_SLAVE was used to allocate 802.15.4 interfaces on the top of radio. It's not used anymore, drop it. Signed-off-by:
-
Mark Smith authored
In all rx'd SKB cases, atalk_rcv() either eventually jumps to or falls through to the label out:, which returns numeric 0. Numeric 0 corresponds to NET_RX_SUCCESS, which is incorrect in failed SKB cases. This patch makes atalk_rcv() provide the correct returns by: o explicitly returning NET_RX_SUCCESS in the two success cases o having the out: label return NET_RX_DROP, instead of numeric 0 o making the failed SKB labels and processing more consistent with other _rcv() routines in the kernel, simplifying validation and removing a backwards goto Signed-off-by:Mark Smith <markzzzsmith@yahoo.com.au> Signed-off-by:
-
Rémi Denis-Courmont authored
Instead of a large (physically) linear buffer, we generate a set of paged sk_buff, so no extra memory copy is involved. This removes high-order allocations and saves quite a bit of memory. Phonet MTU is 65541 bytes, so the two buffers were padded to 128 kilo-bytes each. Now, we create 17 page buffers, almost a 75% memory use reduction. Signed-off-by:
-
Rémi Denis-Courmont authored
With the current driver, the MTU is purely indicative, so there is no need to synchronize with the receive path. Signed-off-by:
-
David S. Miller authored
Conflicts: arch/microblaze/include/asm/socket.h
-
David S. Miller authored
This reverts commit 57921c31. On request from John Linville: It has been shown to create a new problem. There is work towards a solution to that one, but it isn't a simple clean-up. Signed-off-by:
-
- 12 Aug, 2009 1 commit
-
-
Cyrill Gorcunov authored
pernet data should allocated first and freed last on module init/exit routines otherwise it's possible to have unserialized calls to packet handling routines. Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
- 10 Aug, 2009 6 commits
-
-
Dan Carpenter authored
queue == __AR9170_NUM_TXQ would cause a bug on the next line. found by Smatch ( http://repo.or.cz/w/smatch.git ). Cc: stable@kernel.org Reported-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Christian Lamparter <chunkeey@web.de> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Christian Lamparter authored
When ar9170-2.fw was missing, the driver erroneously complained about missing the initialization values file ar9170-1.fw... Signed-off-by:
-
roel kluin authored
If the length is less or equal to frag_prefix_size in the first iteration we write skb_frags_rx[-1] and read from priv->frag_info[-1] Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
roel kluin authored
Prevent read from cards[-1] when no card was found. Signed-off-by:
-
roel kluin authored
An `options[cards_found]' that equals `sizeof(options_mapping)' is already beyond the array. Signed-off-by:
-
Rafael Laufer authored
Commit 1748376b, net: Use a percpu_counter for sockets_allocated added percpu_counter function calls to sctp_proc_init code path, but forgot to add them to sctp_proc_exit(). This resulted in a following Ooops when performing this test # modprobe sctp # rmmod -f sctp # modprobe sctp [ 573.862512] BUG: unable to handle kernel paging request at f8214a24 [ 573.862518] IP: [<c0308b8f>] __percpu_counter_init+0x3f/0x70 [ 573.862530] *pde = 37010067 *pte = 00000000 [ 573.862534] Oops: 0002 [#1] SMP [ 573.862537] last sysfs file: /sys/module/libcrc32c/initstate [ 573.862540] Modules linked in: sctp(+) crc32c libcrc32c binfmt_misc bridge stp bnep lp snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss arc4 joydev snd_pcm ecb pcmcia snd_seq_dummy snd_seq_oss iwlagn iwlcore snd_seq_midi snd_rawmidi snd_seq_midi_event yenta_socket rsrc_nonstatic thinkpad_acpi snd_seq snd_timer snd_seq_device mac80211 psmouse sdhci_pci sdhci nvidia(P) ppdev video snd soundcore serio_raw pcspkr iTCO_wdt iTCO_vendor_support led_class ricoh_mmc pcmcia_core intel_agp nvram agpgart usbhid parport_pc parport output snd_page_alloc cfg80211 btusb ohci1394 ieee1394 e1000e [last unloaded: sctp] [ 573.862589] [ 573.862593] Pid: 5373, comm: modprobe Tainted: P R (2.6.31-rc3 #6) 7663B15 [ 573.862596] EIP: 0060:[<c0308b8f>] EFLAGS: 00010286 CPU: 1 [ 573.862599] EIP is at __percpu_counter_init+0x3f/0x70 [ 573.862602] EAX: f8214a20 EBX: f80faa14 ECX: c48c0000 EDX: f80faa20 [ 573.862604] ESI: f80a7000 EDI: 00000000 EBP: f69d5ef0 ESP: f69d5eec [ 573.862606] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 573.862610] Process modprobe (pid: 5373, ti=f69d4000 task=c2130c70 task.ti=f69d4000) [ 573.862612] Stack: [ 573.862613] 00000000 f69d5f18 f80a70a8 f80fa9fc 00000000 fffffffc f69d5f30 c018e2d4 [ 573.862619] <0> 00000000 f80a7000 00000000 f69d5f88 c010112b 00000000 c07029c0 fffffffb [ 573.862626] <0> 00000000 f69d5f38 c018f83f f69d5f54 c0557cad f80fa860 00000001 c07010c0 [ 573.862634] Call Trace: [ 573.862644] [<f80a70a8>] ? sctp_init+0xa8/0x7d4 [sctp] [ 573.862650] [<c018e2d4>] ? marker_update_probe_range+0x184/0x260 [ 573.862659] [<f80a7000>] ? sctp_init+0x0/0x7d4 [sctp] [ 573.862662] [<c010112b>] ? do_one_initcall+0x2b/0x160 [ 573.862666] [<c018f83f>] ? tracepoint_module_notify+0x2f/0x40 [ 573.862671] [<c0557cad>] ? notifier_call_chain+0x2d/0x70 [ 573.862678] [<c01588fd>] ? __blocking_notifier_call_chain+0x4d/0x60 [ 573.862682] [<c016b2f1>] ? sys_init_module+0xb1/0x1f0 [ 573.862686] [<c0102ffc>] ? sysenter_do_call+0x12/0x28 [ 573.862688] Code: 89 48 08 b8 04 00 00 00 e8 df aa ec ff ba f4 ff ff ff 85 c0 89 43 14 74 31 b8 b0 18 71 c0 e8 19 b9 24 00 a1 c4 18 71 c0 8d 53 0c <89> 50 04 89 43 0c b8 b0 18 71 c0 c7 43 10 c4 18 71 c0 89 15 c4 [ 573.862725] EIP: [<c0308b8f>] __percpu_counter_init+0x3f/0x70 SS:ESP 0068:f69d5eec [ 573.862730] CR2: 00000000f8214a24 [ 573.862734] ---[ end trace 39c4e0b55e7cf54d ]--- Signed-off-by:
Rafael Laufer <rlaufer@cisco.com> Signed-off-by:
Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
-
