Merge branch 'master' into davinci-reset

Add cpufreq support for DA8xx/OMAP-L1xx frame buffer driver
Signed-off-by: Chaithrika U S <chaithrika@ti.com>

The clock divider value can be calculated from the pixel clock
value for the panel. This gives more flexiblity to the driver
to change the divider value on the fly as in the case of cpufreq
feature- support for which will be added shortly.
Signed-off-by: Chaithrika U S <chaithrika@ti.com>

On TI's DA830/OMAP-L137, DA850/OMAP-L138 and DM365, after
setting the 4BITECC_ADD_CALC_START bit in the NAND Flash
control register to 1 and before waiting for the NAND Flash
status register to be equal to 1, 2 or 3, we have to wait
till the ECC HW goes to correction state. Without this wait,
ECC correction calculations will not be proper.

This has been tested on DA830/OMAP-L137, DA850/OMAP-L138,
DM355 and DM365 EVMs.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Acked-by: Sneha Narnakaje <nsnehaprabha@ti.com>

Add cpufreq support to MMC driver. The clock divider value has to be
modified according to the controller input frequency.
Signed-off-by: Chaithrika U S <chaithrika@ti.com>

Currently DaVinci EDMA driver supports multiple EDMA channel
controller instances. edma_alloc_channel() api returns a 32
bit value which has the channel controller number in MSB and
the EDMA channel number in LSB. The variables which store the
value returned by edma_alloc_channel() have to be 32 bit wide
now.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Acked-by: Vipin Bhandari <vipin.bhandari@ti.com>

The ARM kernel supports writethrough data cache via the
CONFIG_CPU_DCACHE_WRITETHROUGH option.  However, that
functionality wasn't implemented in the arch/arm/boot/compressed
code.  It is now necessary due to a new ARM926EJS processor
that has an issue with writeback data cache.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>

The existing NAND infrastructure allows the default main and
mirror bad block tables to be overridden in nand_default_bbt().
However, the davinci_nand driver does not support this.  So,
add fields to the davinci driver's platform data so platform
code can pass in their own bbt's and make the driver honor
those overrides.
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

This patch adds support for MMC/SD controller driver for all DaVinci family
SoC. This patch supports davinci family SoC's DM6446, DM355, DM365 and
DA830/OMAPL137.

The patch has been tested on DM355 EVM.

The MMCSD controller specifications for DM355 can be found at
http://focus.ti.com/general/docs/litabsmultiplefilelist.tsp?literatureNumber=spruee2cSigned-off-by: Vipin Bhandari <vipin.bhandari@ti.com>
Signed-off-by: Purshotam Kumar <purushotam@ti.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>

The rtc-omap driver currently hardcodes the RTC to be
not capable of wakeup events. On the DA850/OMAP-L138
SoC, the RTC is a wake up source from its "deep sleep"
mode.

Let platform data set the wakeup capability flag instead.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

This driver features:

* Alarm support.
* Periodic interrupt by using a timer include into the RTC module.
* The update interrupt is not supported by this RTC module.

This driver was tested on a DM365 EVM by using the rtc-test application
from the Documentation/rtc.txt.
Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Use BIT for macro definitions wherever possible, remove
unused and redundant macros.
Signed-off-by: Chaithrika U S <chaithrika@ti.com>

Adds the driver for enabling keypad support for DaVinci platforms.

DM365 is the only platform that uses this driver at the moment.
Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com>

Correct typo to use mask_ale from platform data when set to non-zero.
Signed-off-by: Hemant Pedanekar <hemantp@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Implement memory accessor interface in the MTD layer which enables the
kernel to access flash data.

This patch adds two new members to the mtd_partition structure, a function
handler which will be called during setup of the partition and an argument
to be passed to this setup function.

Example:
+static struct mtd_partition spi_flash_partitions[] = {
+       [0] = {
+               .name       = "U-Boot",
+               .offset     = 0,
+               .size       = SZ_256K,
+               .mask_flags = MTD_WRITEABLE,
+       },
+       [1] = {
+               .name       = "U-Boot Environment",
+               .offset     = MTDPART_OFS_NXTBLK,
+               .size       = SZ_64K,
+               .mask_flags = MTD_WRITEABLE,
+       },
+       [2] = {
+               .name       = "Linux",
+               .offset     = MTDPART_OFS_NXTBLK,
+               .size       = SZ_7M,
+               .mask_flags = 0,
+       },
+       [3] = {
+               .name       = "MAC Address",
+               .offset     = MTDPART_OFS_NXTBLK,
+               .size       = SZ_64K,
+               .mask_flags = 0,
+               .setup      = davinci_get_mac_addr,
+               .context    = (void *)0,
+       },
+};

The davinci_get_mac_addr function reads the MAC address from
offset ZERO of last MTD partition.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add basic driver for the MSP430 on the DM 365 EVM; it's used
only to report commands from an IR remote.  (This assumes the
same remote used with other DaVinci EVM boards.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

This fixes Oops at kernel startup while "scanning" for TLV320AIC23IDx
addresses.
Signed-off-by: Alexander Vasiliev <alexvasiljev@gmail.com>
Signed-off-by: Brad Griffis <bgriffis@ti.com>
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

The Neuros OSD 2.0 is the hardware component of the Neuros Open
Internet Television Platform. Hardware is very close to Ti DM644X-EVM board.
It has: DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC,
USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video.
Additionaly realtime clock, IR remote control receiver,
IR Blaster based on MSP430 (firmware although is different
from used in DM644X-EVM), internal ATA-6 3.5” HDD drive
with PATA interface, two muxed red-green leds.

For more information please refer to
	http://wiki.neurostechnology.com/index.php/OSD_2.0_HDSigned-off-by: Andrey Porodko <panda@chelcom.ru>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

This patch fixes the following warning:

arch/arm/mach-davinci/board-sffsdr.c:99: warning: 'sffsdr_emac_pdata' defined but not used
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

A section mismatch is reported for gpio_led_platform_data
as it is referenced by a non annotated function (evm_led_setup)

This patch fixes the issue by converting the __initconst to const
as is the case in arch/arm/mach-davinci/board-dm644x-evm.c file.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

The general structures are defined at DM365 SoC file and the specific
platform data structure for the EVM is defined at board file.
Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Include high speed capabilities in MMC/SD platform data
for DA830/OMAP-L137 and DA850/OMAP-L138 EVMs.
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Using a device_initcall() for initializing the voltage regulator
on DA850 is not such a good idea because it gets called for all
platforms - even those who do not have a regulator implemented.
This leads to a big fat warning message during boot-up when
regulator cannot be found.

Instead, tie initialization of voltage regulator to cpufreq init.
Define a platform specific init call which in case of DA850 gets
used for initializing the regulator. On other future platforms it
can be used for other purposes.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>