Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Modifies the davinci_evm_dm646x_defconfig to add the emac support.
Signed-off-by: Chaithrika U.S <chaithrika@ti.com>

Adds support for AT24 I2C EEPROM on DM646X
Signed-off-by: Chaithrika U.S <chaithrika@ti.com>

Adds EMAC support for DM646x. With this patch only 10/100 mode
will work. A patch to support gigabit mode will be submitted
at a later point of time.
Signed-off-by: Chaithrika U.S <chaithrika@ti.com>

Indentation changes to DM644X EMAC resource structure
Signed-off-by: Chaithrika U.S <chaithrika@ti.com>

Adding Support for UART's on DM355
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Adding clocks specific to DM355
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Adding IRQ defintions for DaVinci DM355 and
default interrupt priorities for DM355
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

These PSC definitions are required for the DM355
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Adding Kconfig and Makefile option and board specific
file for DaVinci DM355
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Adds id for DM355
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Adding default config for DaVinci DM355
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

Adds default configuration file for dm646x.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>

Fixes UART mis-behavior on dm646x.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>

I2C initialization for dm646x.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>

Adds dm646x board support.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>

Adds clock related changes for dm646x.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>

Adds dm646x cpu type.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>

Interrupt priorities assignment for dm646x.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>

Adds defines for interrupt number assignments on dm646x.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>

Defines LPSC assignments for dm646x.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>

Replaces occurrence of dm6467 with dm646x.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>

Move arch/arm/mach-davinci/include/mach/hardware.h to arch/arm/mach-davinci/include/mach/dm644x.h
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>

Replaces occurrences of dm6443 with dm644x.

The cpu is decided based on the system_rev variable and it is being
compared with 6446 (Refer to arch/arm/mach-davinci/id.c for details).
So in the current tree, the function cpu_is_davinci_dm6443 will never
be true.
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

Conflicts:
	arch/arm/Kconfig
	arch/arm/mach-davinci/Makefile
	arch/arm/mach-davinci/board-evm.c
	arch/arm/mach-davinci/devices.c
	arch/arm/mach-davinci/gpio.c
	arch/arm/mach-davinci/include/mach/gpio.h
	drivers/i2c/busses/Makefile
	drivers/ide/arm/palm_bk3710.c
	drivers/mtd/nand/Kconfig
	drivers/mtd/nand/Makefile
	drivers/usb/musb/davinci.c
	drivers/usb/musb/musb_core.c
	sound/oss/Makefile

A patch from Russell to sync includes with mainline tree.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Build fixes for "HSMMC: Improve the interface for hsmmc_init()".
The header file needs to work without MMC support enabled, and
some board files needed to include it.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

On Wed, 5 Nov 2008, Tony Lindgren wrote:

> * Paul Walmsley <paul@pwsan.com> [081105 11:39]:
> >
> > The SGX device on OMAP3 does not support retention, so remove RET from the
> > list of possible SGX power states.  Problem debugged by Richard Woodruff
> > <r-woodruff2@ti.com>.
>
> Pushing.

Just FYI, that patch prevents the kernel from booting due to a bug in
pm34xx.c; patch below.

Even with the follwoing patch, the initial power state setup code in
pm34xx.c will bail out early since it still tries to set the SGX next
power state to retention, which it does not support.

- Paul

OMAP3 PM: use list_for_each_entry_safe() when deleting list entries

From: Paul Walmsley <paul@pwsan.com>

The error path in clkdms_setup() needs to use list_for_each_entry_safe()
when deleting entries from the list, or the kernel will crash.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Jouni Högander <jouni.hogander@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix one remaining user of system_rev.  This patch is needed for
3430SDP ES2 to boot after 4a4ada55.

Bisected by Timo-Pekka Launonen's <ext-timo-pekka.launonen@nokia.com>
list robot.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Timo-Pekka Launonen <ext-timo-pekka.launonen@nokia.com>
Cc: Lauri Leukkunen <lauri.leukkunen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The SGX device on OMAP3 does not support retention, so remove RET from the
list of possible SGX power states.  Problem debugged by Richard Woodruff
<r-woodruff2@ti.com>.
Signed-off-by: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Rename some hsmmc init functions to twl_mmc
Signed-off-by: Tony Lindgren <tony@atomide.com>

Improve the interface for hsmmc_init()

Based on earlier code snippet and patch by
David Brownell <dbrownell@users.sourceforge.net>.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Rename hsmmc.c into mmc-twl4030.c
Signed-off-by: Tony Lindgren <tony@atomide.com>

Misc clean-up for hsmmc init
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add support for the second controller hopefully in a generic way.
Also put the twl4030 specific voltage configuration into a separate
function.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix voltage defines, make card detect gpio controller specific
Signed-off-by: Tony Lindgren <tony@atomide.com>