Currently the unmask function for EINT interrupts was setting the mask
bit rather than clearing it.  This was also previously reported and
fixed by Kyungmin Park <kyungmin.park@samsung.com> and others.
Acked-By: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

We've discovered that our AT91SAM9260 board consumed too much power when
returning from a slowclock low-power mode.  RAM self-refresh is enabled in
a bootloader in our case, this is how we saw a difference.  Estimated ca.
30mA more on 4V battery than the same state before powersaving.

After a small research we found that there seems to be a bogus
sdram_selfrefresh_disable() call at the end of at91_pm_enter() call, which
overwrites the LPR register with uninitialized value.  Please find the
suggested patch attached.

This patch fixes correct restoring of LPR register of the Atmel AT91 SDRAM
controller when returning from a power saving mode.
Signed-off-by: Andrei Birjukov <andrei.birjukov@artecdesign.ee>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The 8390 driver was structured by Al Viro to allow the flexibility
required by platforms.  lib8390.c contains the core code which drivers
explicitly include:
- 8390.c includes lib8390.c to provide the standard ISA based driver.
- etherh.c includes it with the accessors defined for RiscPC platforms,
  where it is addressed via the MMIO accessors with a device dependent
  register spacing.

Other platform drivers do something similar.

However, b9a9b4b0 caused the kernel to contain not only the etherh
private build of lib8390 (included in etherh.c) but also lib8390.c
itself, and referred the new net_device_ops methods to the ISA version.
The result of this is is not pretty:

Unable to handle kernel paging request at virtual address 12032030
pgd = c8330000
[12032030] *pgd=00000000
Internal error: Oops: 18331805 [#1]
Modules linked in: ipv6
CPU: 0    Not tainted  (2.6.29-rc3 #167)
PC is at do_set_multicast_list+0xd0/0x190
LR is at bitrev32+0x28/0x34
pc : [<c017aab4>]    lr : [<c0139120>]    psr: a0000093
sp : c8321d9c  ip : c8321d84  fp : c8321dbc
r10: c80c6800  r9 : 00000000  r8 : c80c6b60
r7 : c80c6b80  r6 : cc80c800  r5 : c80c6800  r4 : 00000000
r3 : cc80c80c  r2 : 00000004  r1 : 00000007  r0 : e0000000
Flags: NzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
...

Fix up b9a9b4b0 by making etherh's net_device_ops refer to the internal
lib8390 functions, and remove the build of the ISA 8390.c driver.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

* hibernate:
  PM: Fix suspend_console and resume_console to use only one semaphore
  PM: Wait for console in resume
  PM: Fix pm_notifiers during user mode hibernation
  swsusp: clean up shrink_all_zones()
  swsusp: dont fiddle with swappiness
  PM: fix build for CONFIG_PM unset
  PM/hibernate: fix "swap breaks after hibernation failures"
  PM/resume: wait for device probing to finish
  Consolidate driver_probe_done() loops into one place

This fixes a race where a thread acquires the console while the
console is suspended, and the console is resumed before this
thread releases it. In this case, the secondary console
semaphore would be left locked, and the primary semaphore would
be released twice. This in turn would cause the console switch
on suspend or resume to hang forever.

Note that suspend_console does not actually lock the console
for clients that use acquire_console_sem, it only locks it for
clients that use try_acquire_console_sem. If we change
suspend_console to fully lock the console, then the kernel
may deadlock on suspend. One client of try_acquire_console_sem
is acquire_console_semaphore_for_printk, which uses it to
prevent printk from using the console while it is suspended.
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Avoids later waking up to a blinking cursor if the device woke up and
returned to sleep before the console switch happened.
Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Snapshot device is opened with O_RDONLY during suspend and O_WRONLY durig
resume.  Make sure we also call notifiers with correct parameter telling
them what we are really doing.
Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Move local variables to innermost possible scopes and use local
variables to cache calculations/reads done more than once.

No change in functionality (intended).
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sc.swappiness is not used in the swsusp memory shrinking path, do not
set it.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Compilation of kprobes.c with CONFIG_PM unset is broken due to some broken
config dependncies.  Fix that.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

http://bugzilla.kernel.org/show_bug.cgi?id=12239

The image writing code dropped a reference to the current swap device.
This doesn't show up if the hibernation succeeds - because it doesn't
affect the image which gets resumed.  But it means multiple _failed_
hibernations end up freeing the swap device while it is still use!

swsusp_write() finds the block device for the swap file using swap_type_of().
It then uses blkdev_get() / blkdev_put() to open and close the block device.

Unfortunately, blkdev_get() assumes ownership of the inode of the block_device
passed to it.  So blkdev_put() calls iput() on the inode.  This is by design
and other callers expect this behaviour.  The fix is for swap_type_of() to take
a reference on the inode using bdget().
Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

the resume code does not currently wait for device probing to finish.
Even without async function calls this is dicey and not correct,
but with async function calls during the boot sequence this is going
to get hit more...

This patch adds the synchronization using the newly introduced helper.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Greg KH <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

there's a few places that currently loop over driver_probe_done(), and
I'm about to add another one. This patch abstracts it into a helper
to reduce duplication.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Greg KH <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: remove incorrect __cpuinit for mce_cpu_features()
  MAINTAINERS: paravirt-ops maintainers update

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Fix multiuser mounts so server does not invalidate earlier security contexts
  [CIFS] improve posix semantics of file create
  [CIFS] Fix oops in cifs_strfromUCS_le mounting to servers which do not specify their OS
  cifs: posix fill in inode needed by posix open
  cifs: properly handle case where CIFSGetSrvInodeNumber fails
  cifs: refactor new_inode() calls and inode initialization
  [CIFS] Prevent OOPs when mounting with remote prefixpath.
  [CIFS] ipv6_addr_equal for address comparison

Impact: Bug fix on UP

Checkin 6ec68bff:
    x86, mce: reinitialize per cpu features on resume

introduced a call to mce_cpu_features() in the resume path, in order
for the MCE machinery to get properly reinitialized after a resume.
However, this function (and its successors) was flagged __cpuinit,
which becomes __init on UP configurations (on SMP suspend/resume
requires CPU hotplug and so this would not be seen.)

Remove the offending __cpuinit annotations for mce_cpu_features() and
its successor functions.

Cc: Andi Kleen <ak@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

When two different users mount the same Windows 2003 Server share using CIFS,
the first session mounted can be invalidated.  Some servers invalidate the first
smb session when a second similar user (e.g. two users who get mapped by server to "guest")
authenticates an smb session from the same client.

By making sure that we set the 2nd and subsequent vc numbers to nonzero values,
this ensures that we will not have this problem.

Fixes Samba bug 6004, problem description follows:
How to reproduce:

- configure an "open share" (full permissions to Guest user) on Windows 2003
Server (I couldn't reproduce the problem with Samba server or Windows older
than 2003)
- mount the share twice with different users who will be authenticated as guest.

 noacl,noperm,user=john,dir_mode=0700,domain=DOMAIN,rw
 noacl,noperm,user=jeff,dir_mode=0700,domain=DOMAIN,rw

Result:

- just the mount point mounted last is accessible:
Signed-off-by: Steve French <sfrench@us.ibm.com>

Samba server added support for a new posix open/create/mkdir operation
a year or so ago, and we added support to cifs for mkdir to use it,
but had not added the corresponding code to file create.

The following patch helps improve the performance of the cifs create
path (to Samba and servers which support the cifs posix protocol
extensions).  Using Connectathon basic test1, with 2000 files, the
performance improved about 15%, and also helped reduce network traffic
(17% fewer SMBs sent over the wire) due to saving a network round trip
for the SetPathInfo on every file create.

It should also help the semantics (and probably the performance) of
write (e.g. when posix byte range locks are on the file) on file
handles opened with posix create, and adds support for a few flags
which would have to be ignored otherwise.
Signed-off-by: Steve French <sfrench@us.ibm.com>

Fixes kernel bug #10451 http://bugzilla.kernel.org/show_bug.cgi?id=10451

Certain NAS appliances do not set the operating system or network operating system
fields in the session setup response on the wire.  cifs was oopsing on the unexpected
zero length response fields (when trying to null terminate a zero length field).

This fixes the oops.
Acked-by: Jeff Layton <jlayton@redhat.com>
CC: stable <stable@kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>

function needed to prepare for posix open
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

...if it does then we pass a pointer to an unintialized variable for
the inode number to cifs_new_inode. Have it pass a NULL pointer instead.

Also tweak the function prototypes to reduce the amount of casting.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Move new inode creation into a separate routine and refactor the
callers to take advantage of it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Fixes OOPs with message 'kernel BUG at fs/cifs/cifs_dfs_ref.c:274!'.
Checks if the prefixpath in an accesible while we are still in cifs_mount
and fails with reporting a error if we can't access the prefixpath

Should fix Samba bugs 6086 and 5861 and kernel bug 12192
Signed-off-by: Igor Mammedov <niallain@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (26 commits)
  drm/radeon: update sarea copies of last_ variables on resume.
  drm/i915: Keep refs on the object over the lifetime of vmas for GTT mmap.
  drm/i915: take struct mutex around fb unref
  drm: Use spread spectrum when the bios tells us it's ok.
  drm: Collapse identical i8xx_clock() and i9xx_clock().
  drm: Bring PLL limits in sync with DDX values.
  drm: Add locking around cursor gem operations.
  drm: Propagate failure from setting crtc base.
  drm: Check for a NULL encoder when reverting on error path
  drm/i915: Cleanup the hws on ringbuffer constrution failure.
  drm/i915: Don't add panel_fixed_mode to the probed modes list at LVDS init.
  drm: Release user fbs in drm_release
  drm/i915: Unpin the fb on error during construction.
  drm/i915: Unpin the hws if we fail to kmap.
  drm/i915: Unpin the ringbuffer if we fail to ioremap it.
  drm/i915: unpin for an invalid memory domain.
  drm/i915: Release and unlock on mmap_gtt error path.
  drm/i915: Set framebuffer alignment based upon the fence constraints.
  drm: Do not leak a new reference for flink() on an existing name
  drm/i915: Fix potential AB-BA deadlock in i915_gem_execbuffer()
  ...

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: use the right protections for split-up pagetables
  x86, vmi: TSC going backwards check in vmi clocksource

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] qla2xxx: Update version number to 8.03.00-k3.
  [SCSI] qla2xxx: Mask out 'reserved' bits while processing FLT regions.
  [SCSI] qla2xxx: Correct slab-error overwrite during vport creation and deletion.
  [SCSI] qla2xxx: Properly acknowledge IDC notification messages.
  [SCSI] qla2xxx: Remove interrupt request bit check in the response processing path in multiq mode.
  [SCSI] lpfc: introduce missing kfree
  [SCSI] libiscsi: Fix scsi command timeout oops in iscsi_eh_timed_out
  [SCSI] qla2xxx: fix Kernel Panic with Qlogic 2472 Card.
  [SCSI] ibmvfc: Increase cancel timeout
  [SCSI] ibmvfc: Fix rport relogin
  [SCSI] ibmvfc: Fix command timeout errors
  [SCSI] sg: fix device number in blktrace data
  [SCSI] scsi_scan: add missing interim SDEV_DEL state if slave_alloc fails
  [SCSI] ibmvscsi: Correct DMA mapping leak

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: check file pointer in btrfs_sync_file

Intel 8257x Ethernet boards have a feature called Serial Over Lan.

This feature works by emulating a serial port, and it is detected by
kernel as a normal 8250 port.  However, this emulation is not perfect, as
also noticed on changeset 7500b1f6.

Before this patch, the kernel were trying to check if the serial TX is
capable of work using IRQ's.

This were done with a code similar this:

        serial_outp(up, UART_IER, UART_IER_THRI);
        lsr = serial_in(up, UART_LSR);
        iir = serial_in(up, UART_IIR);
        serial_outp(up, UART_IER, 0);

        if (lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT)
		up->bugs |= UART_BUG_TXEN;

This works fine for other 8250 ports, but, on 8250-emulated SoL port, the
chip is a little lazy to down UART_IIR_NO_INT at UART_IIR register.

Due to that, UART_BUG_TXEN is sometimes enabled.  However, as TX IRQ keeps
working, and the TX polling is now enabled, the driver miss-interprets the
IRQ received later, hanging up the machine until a key is pressed at the
serial console.

This is the 6 version of this patch.  Previous versions were trying to
introduce a large enough delay between serial_outp and serial_in(up,
UART_IIR), but not taking forever.  However, the needed delay couldn't be
safely determined.

At the experimental tests, a delay of 1us solves most of the cases, but
still hangs sometimes.  Increasing the delay to 5us was better, but still
doesn't solve.  A very high delay of 50 ms seemed to work every time.

However, poking around with delays and pray for it to be enough doesn't
seem to be a good approach, even for a quirk.

So, instead of playing with random large arbitrary delays, let's just
disable UART_BUG_TXEN for all SoL ports.

[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This adds more documentation of the lowlevel API to avoid future bugs.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Impact: proper vcache flush on unmap_kernel_range()

flush_cache_vunmap() should be called before pages are unmapped.  Add
a call to it in unmap_kernel_range().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Nick Piggin <npiggin@suse.de>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: <stable@kernel.org>		[2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I noticed the old commit 8f5aa26c
("cpusets: update_cpumask documentation fix") is not a complete fix,
resulting in inconsistent paragraphs.  This patch fixes it and does other
fixes and updates:

- s/migrate_all_tasks()/migrate_live_tasks()/
- describe more cpuset control files
- s/cpumask_t/struct cpumask/
- document cpu hotplug and change of 'sched_relax_domain_level' may cause
  domain rebuild
- document various ways to query and modify cpusets
- the equivalent of "mount -t cpuset" is "mount -t cgroup -o cpuset,noprefix"
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

BUILD_DOCSRC should be controlled by "config" instead of "menuconfig".
I have no idea how I managed to use "menuconfig" here.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The "break" would just result in reusing a free'd pointer.  I don't have
the cards myself to test it though.  :/
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Caused by 736d5453 (sx.c: fix missed unlock_kernel() on error path in
sx_fw_ioctl()).  You guys keep breaking things this way in every single
kernel release in at least couple of places...  :-(
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It should be Documentation/build/kconfig.txt.

Introduced by commit 2af238e4
("kbuild: make *config usage docs").
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kzfree() is a wrapper for kfree() that additionally zeroes the underlying
memory before releasing it to the slab allocator.

Currently there is code which memset()s the memory region of an object
before releasing it back to the slab allocator to make sure
security-sensitive data are really zeroed out after use.

These callsites can then just use kzfree() which saves some code, makes
users greppable and allows for a stupid destructor that isn't necessarily
aware of the actual object size.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Matt Mackall <mpm@selenic.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the typo && -> ||.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

oprofile for MN10300 seems to have been broken by the advent of the new
tracing framework.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* Replace kmalloc() with uml_kmalloc() (fix build failure)

* Remove unnecessary UM_KERN_INFO in printk() (don't display '<6>' while
  printing info)
Signed-off-by: Luca Bigliardi <shammash@artha.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Reviewed-by: WANG Cong <wangcong@zeuux.org>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>