- 16 Jun, 2009 1 commit
-
-
Joerg Roedel authored
This patch fixes a bug in the overlap function which returned true if one region ends exactly before the second region begins. This is no overlap but the function returned true in that case. Cc: stable@kernel.org Reported-by: Andrew Randrianasulu <randrik@mail.ru> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
-
- 15 Jun, 2009 2 commits
-
-
Joerg Roedel authored
The current code is not very careful when it builds reference dma_debug_entries which get passed to hash_bucket_find(). But since this function changed to a best-fit algorithm these entries have to be more acurate. This patch adds this higher level of accuracy. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
-
Joerg Roedel authored
If we don't check for sg_call_ents the hash_bucket_find function might still return the wrong dma_debug_entry for sg mappings. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
-
- 09 Jun, 2009 5 commits
-
-
Ingo Molnar authored
Merge branch 'amd-iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into core/iommu
-
Joerg Roedel authored
That prefix is already included in the DUMP_printk macro. So there is no need to repeat it in the format string. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
-
Joerg Roedel authored
This fixes a bug with a device that could not be assigned to a KVM guest because it is still assigned to a dma_ops protection domain. [chrisw: simply remove WARN_ON(), will always fire since dev->driver will be pci-sub] Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
-
Joerg Roedel authored
Handling this event causes device assignment in KVM to fail because the device gets re-attached as soon as the pci-stub registers as the driver for the device. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
-
Joerg Roedel authored
-
- 08 Jun, 2009 5 commits
-
-
Joerg Roedel authored
This patch makes the driver_filter function more readable by reorganizing the code. The removal of a code code block to an upper indentation level makes hard-to-read line-wraps unnecessary. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
-
Joerg Roedel authored
There is no need to disable/enable irqs on each loop iteration. Just disable irqs for the whole time the loop runs. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
-
Joerg Roedel authored
The pr_* macros are shorter than the old printk(KERN_ ...) variant. Change the dma-debug code to use the new macros and save a few unnecessary line breaks. If lines don't break the source code can also be grepped more easily. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
-
Joerg Roedel authored
This patch changes the recent updates to dma-debug to conform with coding style guidelines of Linux and the -tip tree. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
-
Joerg Roedel authored
Last patch series introduced some new comment which does not fit the Kernel comment style guidelines. Fix it with this patch. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
-
- 07 Jun, 2009 3 commits
-
-
Ingo Molnar authored
Merge branch 'dma-debug/2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into core/iommu
-
Ingo Molnar authored
Merge reason: This branch was on an -rc5 base so pull almost-2.6.30 to resync with the latest upstream fixes and make sure the combination works fine. Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Joerg Roedel authored
Some device drivers map the same physical address multiple times to a dma address. Without an IOMMU this results in the same dma address being put into the dma-debug hash multiple times. With a first-fit match in hash_bucket_find() this function may return the wrong dma_debug_entry. This can result in false positive warnings. This patch fixes it by changing the first-fit behavior of hash_bucket_find() into a best-fit algorithm. Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com> Reported-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Cc: lethal@linux-sh.org Cc: just.for.lkml@googlemail.com Cc: hancockrwd@gmail.com Cc: jens.axboe@oracle.com Cc: bharrosh@panasas.com Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@kernel.org> LKML-Reference: <20090605104132.GE24836@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 06 Jun, 2009 1 commit
-
-
Mark Langsdorf authored
The current code to set up the GART as an IOMMU enables GART translations before it removes the aperture from the kernel memory map, sets the GART PTEs to UC, sets up the guard and scratch pages, or does a wbinvd(). This leaves the possibility of cache aliasing open and can cause system crashes. Re-order the code so as to enable the GART translations only after all safeguards are in place and the tlb has been flushed. AMD has tested this patch on both Istanbul systems and 1st generation Opteron systems with APG enabled and seen no adverse effects. Istanbul systems with HT Assist enabled sometimes see MCE errors due to cache artifacts with the unmodified code. Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com> Cc: <stable@kernel.org> Cc: Joerg Roedel <joerg.roedel@amd.com> Cc: akpm@linux-foundation.org Cc: jbarnes@virtuousgeek.org Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 04 Jun, 2009 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intelLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Remove a bad BUG_ON in the fence management code.
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: ignore EDID with really tiny modes. drm: don't associate _DRM_DRIVER maps with a master drm/i915: intel_lvds.c fix section mismatch drm: Hook up DPMS property handling in drm_crtc.c. Add drm_helper_connector_dpms. drm: set permissions on edid file to 0444 drm: add newlines to text sysfs files drm/radeon: fix ring free alignment calculations drm: fix irq naming for kms drivers.
-
Salman Qazi authored
While running 20 parallel instances of dd as follows: #!/bin/bash for i in `seq 1 20`; do dd if=/dev/zero of=/export/hda3/dd_$i bs=1073741824 count=1 & done wait on a 16G machine, we noticed that rather than just killing the processes, the entire kernel went down. Stracing dd reveals that it first does an mmap2, which makes 1GB worth of zero page mappings. Then it performs a read on those pages from /dev/zero, and finally it performs a write. The machine died during the reads. Looking at the code, it was noticed that /dev/zero's read operation had been changed by 557ed1fa ("remove ZERO_PAGE") from giving zero page mappings to actually zeroing the page. The zeroing of the pages causes physical pages to be allocated to the process. But, when the process exhausts all the memory that it can, the kernel cannot kill it, as it is still in the kernel mode allocating more memory. Consequently, the kernel eventually crashes. To fix this, I propose that when a fatal signal is pending during /dev/zero read operation, we simply return and let the user process die. Signed-off-by: Salman Qazi <sqazi@google.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Modified error return and comment trivially. - Linus] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rusty Russell authored
We don't set up the canary; let's disable stack protector on boot.c so we can get into lguest_init, then set it up. As a side effect, switch_to_new_gdt() sets up %fs for us properly too. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eric Anholt authored
This could be triggered by a gtt mapping fault on 965 that decides to remove the fence from another object that happens to be active currently. Since the other object doesn't rely on the fence reg for its execution, we don't wait for it to finish. We'll soon be not waiting on 915 most of the time as well, so just drop the BUG_ON. Signed-off-by: Eric Anholt <eric@anholt.net>
-
Adam Jackson authored
Some EDIDs lie and report tiny modes that aren't possible. Ignore these modes. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 03 Jun, 2009 10 commits
-
-
Ben Skeggs authored
A driver will use the _DRM_DRIVER map flag to indicate that it wants to be responsible for removing the map itself, bypassing the DRM's automagic cleanup code. Since the multi-master changes this has been broken, resulting in some drivers having their registers unmapped before it's finished with them. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jaswinder Singh Rajput authored
intel_no_lvds[] does not require __initdata as it is used only by void intel_lvds_init(struct drm_device *dev). Signed-off-by: Jaswinder Singh Rajput <jaswinder@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Keith Packard authored
Making the drm_crtc.c code recognize the DPMS property and invoke the connector->dpms function doesn't remove any capability from the driver while reducing code duplication. That just highlighted the problem with the existing DPMS functions which could turn off the connector, but failed to turn off any relevant crtcs. The new drm_helper_connector_dpms function manages all of that, using the drm_helper-specific crtc and encoder dpms functions, automatically computing the appropriate DPMS level for each object in the system. This fixes the current troubles in the i915 driver which left PLLs, pipes and planes running while in DPMS_OFF mode or even while they were unused. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Keith Packard authored
Without initializing the sysfs attributes for the edid file, it was created with mode 0, making it difficult for applications to use. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Keith Packard authored
The contents of various simple text files in sysfs should end with a newline to make them easier to read from the console. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
fd.o bz#21849 We were aligning to +16 dwords, instead of to the next 16dword boundary in the ring. Fix the calculation to go to the next 16dword boundary when space checking. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
allocating devname in the i915 driver was a hack originally and I forgot to figure out how to do this properly back then. So this is the cleaner version that just picks devname or driver name in the irq code. It removes the devname allocs from the i915 driver. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Jiri Slaby authored
In alloc_coherent there is an omitted unlock on the path where mapping fails. Add the unlock. [ Impact: fix lock imbalance in alloc_coherent ] Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pmac: Update PowerMac 32-bit defconfig
-
- 02 Jun, 2009 7 commits
-
-
Alan Cox authored
Ideally we should have a directory of drivers and a link to the 'active' driver. For now just show the first device which is effectively the existing semantics without a warning. This is an update on the original buggy patch that I then forgot to resubmit. Confusingly it was proposed by Red Hat, written by Etched Pixels fixed and submitted by Intel ... Resolves-Bug: http://bugzilla.kernel.org/show_bug.cgi?id=9749Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alan Cox authored
This matches Bartlomiej's patch for ide_pci_generic: c339dfdd In the libata case netcell has its own mini driver. I suspect this fix is actually only needed for some firmware revs but it does no harm either way. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup e1000: add missing length check to e1000 receive routine forcedeth: add phy_power_down parameter, leave phy powered up by default (v2) Bluetooth: Remove useless flush_work() causing lockdep warnings
-
git://oss.sgi.com/xfs/xfsLinus Torvalds authored
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: prevent deadlock in xfs_qm_shake() xfs: fix overflow in xfs_growfs_data_private xfs: fix double unlock in xfs_swap_extents()
-
Joerg Roedel authored
-
Joerg Roedel authored
This patch adds the driver filter feature to the dma-debug documentation. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
-
Joerg Roedel authored
This patch add the dma_debug_driver= boot parameter to enable the driver filter for early boot. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
-