Skip to content

L
linux-davinci
Switch branch/tag
  1. 02 Jun, 2009 7 commits
    • Takashi Iwai's avatar
      ALSA: ctxfi - Support SG-buffers · c76157d9
      Takashi Iwai authored 
      Use SG-buffers instead of contiguous pages.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      c76157d9
    • Takashi Iwai's avatar
      ALSA: ctxfi - Remove PAGE_SIZE limitation · cd391e20
      Takashi Iwai authored 
      Remove the limitation of PAGE_SIZE to be 4k by defining the own
page size and macros for 4k.  8kb page size could be natively supported,
but it's disabled right now for simplicity.

Also, clean up using upper_32_bits() macro.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      cd391e20
    • Takashi Iwai's avatar
      ALSA: ctxfi - Fix supported PCM formats · d2b9b96c
      Takashi Iwai authored 
      The device seems supporting only U8, S16, S24_3LE, S32.  Other linear
formats result in bad outputs.

Also, added the support for 32bit float format, which wasn't listed
in the original code.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      d2b9b96c
    • Takashi Iwai's avatar
      ALSA: ctxfi - Fix PCM device naming · 8372d498
      Takashi Iwai authored 
      PCM names for surround streams should be also fixed as well as the mixer
element names.  Also, a bit clean up for PCM name setup.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      8372d498
    • Takashi Iwai's avatar
      ALSA: ctxfi - Fix surround mixer names · 6585db94
      Takashi Iwai authored 
      We usually pick up "Surround" mixer for the rear output, and "Side"
for the extra surround.  Fix the channel mapping to follow it.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      6585db94
    • Takashi Iwai's avatar
      ALSA: ALSA: ctxfi - Release PCM resources at each prepare call · 822fa19b
      Takashi Iwai authored 
      The prepare callback can be called multiple times, thus it needs to
release and acquire the resource again by itself at the second or later
call.

Simply add pcm_release_resources() at the beginning of each prepare
callback in ctatc.c.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      822fa19b
    • Takashi Iwai's avatar
      ALSA: ctxfi - Fix Oops at mmapping · 8a4259bf
      Takashi Iwai authored 
      Replace a spinlock with a mutex protecting the vm block list at
mmap / munmap calls, which caused Oops like below:

BUG: sleeping function called from invalid context at mm/slub.c:1599
in_atomic(): 0, irqs_disabled(): 1, pid: 32065, name: xine
Pid: 32065, comm: xine Tainted: P           2.6.29.4-75.fc10.x86_64 #1
Call Trace:
  [<ffffffff81040685>] __might_sleep+0x105/0x10a
  [<ffffffff810c9fae>] kmem_cache_alloc+0x32/0xe2
  [<ffffffffa08e3110>] ct_vm_map+0xfa/0x19e [snd_ctxfi]
  [<ffffffffa08e1a07>] ct_map_audio_buffer+0x4c/0x76 [snd_ctxfi]
  [<ffffffffa08e2aa5>] atc_pcm_playback_prepare+0x1d7/0x2a8 [snd_ctxfi]
  [<ffffffff8105ef3f>] ? up_read+0x9/0xb
  [<ffffffff81186b61>] ? __up_read+0x7c/0x87
  [<ffffffffa08e36a6>] ct_pcm_playback_prepare+0x39/0x60 [snd_ctxfi]
  [<ffffffffa0886bcb>] snd_pcm_do_prepare+0x16/0x28 [snd_pcm]
  [<ffffffffa08867c7>] snd_pcm_action_single+0x2d/0x5b [snd_pcm]
  [<ffffffffa08881f3>] snd_pcm_action_nonatomic+0x52/0x6a [snd_pcm]
  [<ffffffffa088a723>] snd_pcm_common_ioctl1+0x404/0xc79 [snd_pcm]
  [<ffffffff810c52c8>] ? alloc_pages_current+0xb9/0xc2
  [<ffffffff810c9402>] ? new_slab+0x1a5/0x1cb
  [<ffffffff810ab9ea>] ? vma_prio_tree_insert+0x23/0xc1
  [<ffffffffa088b411>] snd_pcm_playback_ioctl1+0x213/0x230 [snd_pcm]
  [<ffffffff810b6c20>] ? mmap_region+0x397/0x4c9
  [<ffffffffa088bd9b>] snd_pcm_playback_ioctl+0x2e/0x36 [snd_pcm]
  [<ffffffff810ddc64>] vfs_ioctl+0x2a/0x78
  [<ffffffff810de130>] do_vfs_ioctl+0x462/0x4a2
  [<ffffffff81029cef>] ? default_spin_lock_flags+0x9/0xe
  [<ffffffff81374647>] ? trace_hardirqs_off_thunk+0x3a/0x6c
  [<ffffffff810de1c5>] sys_ioctl+0x55/0x77
  [<ffffffff8101133a>] system_call_fastpath+0x16/0x1b
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      8a4259bf
  3. 26 May, 2009 1 commit
  5. 20 May, 2009 1 commit
    • Takashi Iwai's avatar
      ALSA: ctxfi - Add depends on X86 · 3e3ee6dc
      Takashi Iwai authored 
      The ctxfi driver requires explicitly the 4k page size, and gives a
build error on architectures with non-4k pages.
As a workaround, just add the kconfig dependency on X86, which is
the only architecture ever tested.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      3e3ee6dc
  7. 14 May, 2009 5 commits
  9. 09 May, 2009 2 commits
  11. 08 May, 2009 14 commits
  13. 07 May, 2009 10 commits
    • David Howells's avatar
      NOMMU: Don't check vm_region::vm_start is page aligned in add_nommu_region() · 8c9ed899
      David Howells authored 
      Don't check vm_region::vm_start is page aligned in add_nommu_region() because
the region may reflect some non-page-aligned mapped file, such as could be
obtained from RomFS XIP.
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
Acked-by: default avatarGreg Ungerer <gerg@uclinux.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8c9ed899
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://neil.brown.name/md · ee7fee0b
      Linus Torvalds authored 
      * 'for-linus' of git://neil.brown.name/md:
  md: remove rd%d links immediately after stopping an array.
  md: remove ability to explicit set an inactive array to 'clean'.
  md: constify VFTs
  md: tidy up status_resync to handle large arrays.
  md: fix some (more) errors with bitmaps on devices larger than 2TB.
  md/raid10: don't clear bitmap during recovery if array will still be degraded.
  md: fix loading of out-of-date bitmap.
      ee7fee0b
    • Linus Torvalds's avatar
      random: make get_random_int() more random · 8a0a9bd4
      Linus Torvalds authored 
      It's a really simple patch that basically just open-codes the current
"secure_ip_id()" call, but when open-coding it we now use a _static_
hashing area, so that it gets updated every time.

And to make sure somebody can't just start from the same original seed of
all-zeroes, and then do the "half_md4_transform()" over and over until
they get the same sequence as the kernel has, each iteration also mixes in
the same old "current->pid + jiffies" we used - so we should now have a
regular strong pseudo-number generator, but we also have one that doesn't
have a single seed.

Note: the "pid + jiffies" is just meant to be a tiny tiny bit of noise. It
has no real meaning. It could be anything. I just picked the previous
seed, it's just that now we keep the state in between calls and that will
feed into the next result, and that should make all the difference.

I made that hash be a per-cpu data just to avoid cache-line ping-pong:
having multiple CPU's write to the same data would be fine for randomness,
and add yet another layer of chaos to it, but since get_random_int() is
supposed to be a fast interface I did it that way instead. I considered
using "__raw_get_cpu_var()" to avoid any preemption overhead while still
getting the hash be _mostly_ ping-pong free, but in the end good taste won
out.
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8a0a9bd4
    • Linus Torvalds's avatar
      Merge master.kernel.org:/home/rmk/linux-2.6-arm · 2c66fa7e
      Linus Torvalds authored 
      * master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation types
  [ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32)
  i.MX31: Disable CPU_32v6K in mx3_defconfig.
  mx3fb: Fix compilation with CONFIG_PM
  mx27ads: move PBC mapping out of vmalloc space
  MXC: remove BUG_ON in interrupt handler
  mx31: remove mx31moboard_defconfig
  ARM: ARCH_MXC should select HAVE_CLK
  mxc : BUG in imx_dma_request
  mxc : Clean up properly when imx_dma_free() used without imx_dma_disable()
  [ARM] mv78xx0: update defconfig
  [ARM] orion5x: update defconfig
  [ARM] Kirkwood: update defconfig
  [ARM] Kconfig typo fix:  "PXA930" -> "CPU_PXA930".
  [ARM] S3C2412: Add missing cache flush in suspend code
  [ARM] S3C: Add UDIVSLOT support for newer UARTS
  [ARM] S3C64XX: Add S3C64XX_PA_IIS{0,1} to <mach/map.h>
      2c66fa7e
    • Paul Gortmaker's avatar
      [ARM] 5507/1: support R_ARM_MOVW_ABS_NC and MOVT_ABS relocation types · ae51e609
      Paul Gortmaker authored 
      From: Bruce Ashfield <bruce.ashfield@windriver.com>

To fully support the armv7-a instruction set/optimizations, support
for the R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS relocation types is
required.

The MOVW and MOVT are both load-immediate instructions, MOVW loads 16
bits into the bottom half of a register, and MOVT loads 16 bits into the
top half of a register.

The relocation information for these instructions has a full 32 bit
value, plus an addend which is stored in the 16 immediate bits in the
instruction itself.  The immediate bits in the instruction are not
contiguous (the register # splits it into a 4 bit and 12 bit value),
so the addend has to be extracted accordingly and added to the value.
The value is then split and put into the instruction; a MOVW uses the
bottom 16 bits of the value, and a MOVT uses the top 16 bits.
Signed-off-by: default avatarDavid Borman <david.borman@windriver.com>
Signed-off-by: default avatarBruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      ae51e609
    • Kevin Hilman's avatar
      [ARM] 5506/1: davinci: DMA_32BIT_MASK --> DMA_BIT_MASK(32) · a029b706
      Kevin Hilman authored 
      As per commit 284901a9, use
DMA_BIT_MASK(n)
Signed-off-by: default avatarKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      a029b706
    • NeilBrown's avatar
      md: remove rd%d links immediately after stopping an array. · c4647292
      NeilBrown authored 
      md maintains link in sys/mdXX/md/ to identify which device has
which role in the array. e.g.
   rd2 -> dev-sda

indicates that the device with role '2' in the array is sda.

These links are only present when the array is active.  They are
created immediately after ->run is called, and so should be removed
immediately after ->stop is called.
However they are currently removed a little bit later, and it is
possible for ->run to be called again, thus adding these links, before
they are removed.

So move the removal earlier so they are consistently only present when
the array is active.
Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      c4647292
    • NeilBrown's avatar
      md: remove ability to explicit set an inactive array to 'clean'. · 5bf29597
      NeilBrown authored 
      Being able to write 'clean' to an 'array_state' of an inactive array
to activate it in 'clean' mode is both unnecessary and inconvenient.

It is unnecessary because the same can be achieved by writing
'active'.  This activates and array, but it still remains 'clean'
until the first write.

It is inconvenient because writing 'clean' is more often used to
cause an 'active' array to revert to 'clean' mode (thus blocking
any writes until a 'write-pending' is promoted to 'active').

Allowing 'clean' to both activate an array and mark an active array as
clean can lead to races:  One program writes 'clean' to mark the
active array as clean at the same time as another program writes
'inactive' to deactivate (stop) and active array.  Depending on which
writes first, the array could be deactivated and immediately
reactivated which isn't what was desired.

So just disable the use of 'clean' to activate an array.

This avoids a race that can be triggered with mdadm-3.0 and external
metadata, so it suitable for -stable.
Reported-by: default avatarRafal Marszewski <rafal.marszewski@intel.com>
Acked-by: default avatarDan Williams <dan.j.williams@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      5bf29597
    • Jan Engelhardt's avatar
      md: constify VFTs · 110518bc
      Jan Engelhardt authored 
      Signed-off-by: default avatarJan Engelhardt <jengelh@medozas.de>
Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      110518bc
    • NeilBrown's avatar
      md: tidy up status_resync to handle large arrays. · dd71cf6b
      NeilBrown authored 
      Two problems in status_resync.
1/ It still used Kilobytes as the basic block unit, while most code
   now uses sectors uniformly.
2/ It doesn't allow for the possibility that max_sectors exceeds
   the range of "unsigned long".

So
 - change "max_blocks" to "max_sectors", and store sector numbers
   in there and in 'resync'
 - Make 'rt' a 'sector_t' so it can temporarily hold the number of
   remaining sectors.
 - use sector_div rather than normal division.
 - change the magic '100' used to preserve precision to '32'.
   + making it a power of 2 makes division easier
   + it doesn't need to be as large as it was chosen when we averaged
     speed over the entire run.  Now we average speed over the last 30
     seconds or so.
Reported-by: default avatar"Mario 'BitKoenig' Holbe" <Mario.Holbe@TU-Ilmenau.DE>
Signed-off-by: default avatarNeilBrown <neilb@suse.de>
      dd71cf6b