Since interrupt handler is changed to use interrupt priority, we also need
to save and restore these interrupt controller registers in suspend/resume
routine.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Tested-by: Daniel Mack <daniel@caiaq.de>
Tested-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

Palm Tungsten C keyboard structure has swapped
rows/cols gpio structures and does not work.
This patch fixes it.
Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

Borzoi, Terrier and Akita use the same NAND Flash OOB layout, which
seems to be different from Spitz for some reason. Here is a fix.

When the code was ported to the platform data, the map was applied just
for Akita.

After this patch, Flash works again on Borzoi. Terrier still has a
problem with partition table different from Borzoi (unfixable without
reading of the system configuration in flash) and JFFS2 partitions can
be mounted (with some "Empty flash at ... ends at ..." in the syslog).
Signed-off-by: Stanislav Brabec <utx@penguin.cz>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: fix wireless drivers depends
  Staging: wireless drivers Kconfig change
  Staging: android: mark subsystem as broken
  Staging: remove stlc45xx driver
  Staging: rtl8187se/rtl8192e/rtl8192su: allow module unload
  Staging: vt6656: fix the memory free bug in vntwusb_disconnect()
  Staging: Panel: prevent driver from calling misc_deregister twice on same ressource
  Staging: hv: fix oops in vmbus - missing #include
  Staging: hv: fix oops in vmbus - netvsc list_head
  Staging: hv: fix oops in vmbus - udev events
  Staging: hv: Fix vmbus load hang caused by faulty data packing
  Staging: hv: Fix null pointer error after vmbus loading
  Staging: hv TODO patches

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: fsl_udc_core: Fix kernel oops on module removal
  USB: option: TLAYTECH TUE800 support
  USB: r8a66597-hcd: fix cannot detect a device when uses_new_polling is set
  USB: serial: sierra driver autopm fixes
  USB: serial: sierra driver send_setup() autopm fix
  USB: rndis_host: debug info clobbered before it is logged

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty: Mark generic_serial users as BROKEN

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  Documentation: ABI: /sys/devices/system/cpu/cpu#/node
  Documentation: ABI: /sys/devices/system/cpu/cpuidle/
  Documentation: ABI: /sys/devices/system/cpu/sched_[mc|smt]_power_savings
  Documentation: ABI: /sys/devices/system/cpu/cpu#/ topology files
  Documentation: ABI: /sys/devices/system/cpu/ topology files
  Documentation: ABI: document /sys/devices/system/cpu/
  Documentation: ABI: rename sysfs-devices-cache_disable properly
  Driver core: allow certain drivers prohibit bind/unbind via sysfs
  Driver core: fix driver_register() return value

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] smp: fix sigp sense handling
  [S390] smp: fix sigp stop handling
  [S390] cputime: fix overflow on 31 bit systems
  [S390] call home: fix string length handling
  [S390] call home: fix error handling in init function
  [S390] smp: fix prefix handling of offlined cpus
  [S390] s/r: cmm resume fix
  [S390] call home: fix local buffer usage in proc handler

* 'for-linus' of git://git.kernel.org/pub/scm/fs/xfs/xfs:
  xfs: fix xfs_quota remove error
  xfs: free temporary cursor in xfs_dialloc

* 'for-linus' of git://neil.brown.name/md:
  async_tx: fix asynchronous raid6 recovery for ddf layouts
  async_pq: rename scribble page
  async_pq: kill a stray dma_map() call and other cleanups
  md/raid6: kill a gcc-4.0.1 'uninitialized variable' warning
  raid6/async_tx: handle holes in block list in async_syndrome_val
  md/async: don't pass a memory pointer as a page pointer.
  md: Fix handling of raid5 array which is being reshaped to fewer devices.
  md: fix problems with RAID6 calculations for DDF.
  md/raid456: downlevel multicore operations to raid_run_ops
  md: drivers/md/unroll.pl replaced with awk analog
  md: remove clumsy usage of do_sync_mapping_range from bitmap code
  md: raid1/raid10: handle allocation errors during array setup.
  md/raid5: initialize conf->device_lock earlier
  md/raid1/raid10: add a cond_resched
  Revert "md: do not progress the resync process if the stripe was blocked"

Commit ef7562b7 ("dpt_i2o: Fix up
copy*user") had a silly typo: EINVAL should be -EINVAL.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: stable@kernel.org
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Don't pass NULL pointers to fput() in the error handling paths of the NOMMU
do_mmap_pgoff() as it can't handle it.

The following can be used as a test program:

	int main() { static long long a[1024 * 1024 * 20] = { 0 }; return a;}

Without the patch, the code oopses in atomic_long_dec_and_test() as called by
fput() after the kernel complains that it can't allocate that big a chunk of
memory.  With the patch, the kernel just complains about the allocation size
and then the program segfaults during execve() as execve() can't complete the
allocation of all the new ELF program segments.
Reported-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Robin Getz <rgetz@blackfin.uclinux.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Describe NUMA node symlink created for CPUs when CONFIG_NUMA is set.

Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Document cpuidle sysfs attributes by reading code, Documentation/cpuidle/,
and git logs.

Cc: Venki Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Document sched_[mc|smt]_power_savings by reading existing code and
git logs.

Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add brief descriptions for the following sysfs files:

	/sys/devices/system/cpu/cpu#/topology/core_id
	/sys/devices/system/cpu/cpu#/topology/core_siblings
	/sys/devices/system/cpu/cpu#/topology/core_siblings_list
	/sys/devices/system/cpu/cpu#/topology/physical_package_id
	/sys/devices/system/cpu/cpu#/topology/thread_siblings
	/sys/devices/system/cpu/cpu#/topology/thread_siblings_list

The descriptions in Documentation/cputopology.txt weren't very
informative, so I attempted a better description based on code
reading and hopeful guessing.

Updated Documentation/cputopology.txt with the better descriptions and
fixed some style issues.

Cc: Mike Travis <travis@sgi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add brief descriptions for the following sysfs files:

	/sys/devices/system/cpu/kernel_max
	/sys/devices/system/cpu/offline
	/sys/devices/system/cpu/online
	/sys/devices/system/cpu/possible
	/sys/devices/system/cpu/present

Excerpted the relevant information from Documentation/cputopology.txt
and pointed back to cputopology.txt as the authoritative source of
information.

Cc: Mike Travis <travis@sgi.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This interface has been around for a long time, but hasn't been
officially documented.

Document the top level sysfs directory for CPU attributes.
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Rename sysfs-devices-cache_disable to sysfs-devices-system-cpu, in
order to keep a stricter correlation between a sysfs directory and
its documentation.
Reported-by: David Rientjes <rientjes@google.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Platform drivers registered via platform_driver_probe() can be bound
to devices only once, upon registration, because discard their probe()
routines to save memory. Unbinding the driver through sysfs 'unbind'
leaves the device stranded and confuses users so let's not create
bind and unbind attributes for such drivers.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

In this patch:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=16dc42e018c2868211b4928f20a957c0c216126c
the check was added for another driver to already claim the same device
on the same bus. But the returned error code was wrong: to modprobe, the
-EEXIST means that _this_ driver is already installed. It therefore
doesn't produce the needed error message when _another_ driver is trying
to register for the same device.  Returning -EBUSY fixes the problem.
Signed-off-by: Stas Sergeev <stsp@aknet.ru>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

fsl_udc_release() calls dma_free_coherent() with an inappropriate
device passed to it, and since the device has no dma_ops, the following
oops pops up:

  Kernel BUG at d103ce9c [verbose debug info unavailable]
  Oops: Exception in kernel mode, sig: 5 [#1]
  ...
  NIP [d103ce9c] fsl_udc_release+0x50/0x80 [fsl_usb2_udc]
  LR [d103ce74] fsl_udc_release+0x28/0x80 [fsl_usb2_udc]
  Call Trace:
  [cfbc7dc0] [d103ce74] fsl_udc_release+0x28/0x80 [fsl_usb2_udc]
  [cfbc7dd0] [c01a35c4] device_release+0x2c/0x90
  [cfbc7de0] [c016b480] kobject_cleanup+0x58/0x98
  [cfbc7e00] [c016c52c] kref_put+0x54/0x6c
  [cfbc7e10] [c016b360] kobject_put+0x34/0x64
  [cfbc7e20] [c01a1d0c] put_device+0x1c/0x2c
  [cfbc7e30] [d103dbfc] fsl_udc_remove+0xc0/0x1e4 [fsl_usb2_udc]
  ...

This patch fixes the issue by passing dev->parent, which points to
a correct device.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Li Yang <leoli@freescale.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Guennadi Liakhovetski <lg@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add ID for Tlaytech TUE800 CDMA modem to the option driver.
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-By: Matthias Urlichs <matthias@urlichs.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch presents fixes for the autosuspend feature implementation in
sierra usb serial driver in  functions sierra_open(), sierra_close() and
stop_read_write_urbs().

The patch "sierra_close() must resume the device before it notifies it
of a closure" submitted by Oliver Neukum on Wed, October 14 has been
merged as fix in sierra_close() function.

The bug fix  in sierra_open() function restores the autopm interface
state on error condition.

The bug fix in in stop_read_write_urbs() function assures that both
receive and interrupt urbs are recycled.
Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch presents a fix for the autosuspend feature implementation in
sierra usb serial driver for function sierra_send_setup().  Because it
is possible to call sierra_send_setup() before sierra_open() or after
sierra_close() we added a get/put interface activity to assure that the
usb control can happen even when the device is autosuspended.
Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Tested-by: Matthew Safar <msafar@sierrawireless.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The MTU throttle-down if a RNDIS device doesn't support a particular
packet size is being incorrectly logged.  The attempted packet size is
being clobbered before it gets logged.

First patch; please inform if I'm doing this incorrectly.  Diff'd
against latest official source as per the FAQ; forward port to current
git version is straightforward.
Signed-off-by: George Nassar <george.nassar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

These drivers can (erroneously) be enabled even when
CONFIG_NET=n, CONFIG_NETDEVICES=n, CONFIG_WLAN=n, etc.
Stop this.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Change the wireless drivers to depend on CONFIG_WLAN instead of
CONFIG_WLAN_80211 which is going away soon.


Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It's causing lots of build errors, so just mark it as broken.  It is
scheduled to be removed in 2.6.33 anyway.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It's no longer needed as the p54spi driver is the same thing,
under a different name and in the correct portion of the kernel tree.


Cc: Javier Martinez Canillas <martinez.javier@gmail.com>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

On rtl81* additions, they had its wireless stack made builtin instead of
separated modules. But try_module_get/module_put in stack were kept,
they are uneeded with the stack builtin and makes rtl81* modules
impossible to remove on a system with an rtl81* card. request_module
calls are also uneeded with stack builtin, so remove them too.
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch is used to solve the memory bug when people plug out the wusb card then plug in.
Error logs are following:

root@smdk2440:~# ifdown eth1
AP deauthed me, reason=2.
Config_FileOperation file Not exist
Zone=[1][J][P]!!
WPA: Terminating
root@smdk2440:~#  ----> !!!!!!!!!!!!!!here plug out the wusbcard
usb 1-1: USB disconnect, address 4
----> !!!!!!!!!!!!!!!!!!!here plug in the wusb card
usb 1-1: new full speed USB device using s3c2410-ohci and address 5
usb 1-1: New USB device found, idVendor=160a, idProduct=3184
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: VNT USB-802.11 Wireless LAN Adapter
usb 1-1: Manufacturer: VIA Networking Technologies, Inc.
usb 1-1: configuration #1 chosen from 1 choice
VIA Networking Wireless LAN USB Driver Ver. 1.19_12
Copyright (c) 2004 VIA Networking Technologies, Inc.
kernel BUG at mm/slab.c:2974!
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 817 [#1] PREEMPT
Modules linked in: vt6656_stage
CPU: 0    Not tainted  (2.6.32-rc2 #14)
PC is at __bug+0x1c/0x28
LR is at __bug+0x18/0x28
pc : [<c002fb10>]    lr : [<c002fb0c>]    psr: 40000093
sp : c3867c68  ip : c3867bd0  fp : c3866000
r10: c3800600  r9 : c3802430  r8 : 00000004
r7 : c3802428  r6 : c3802660  r5 : c3802420  r4 : a0000013
r3 : 00000000  r2 : c3866000  r1 : 00000003  r0 : 00000024
Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 0000717f  Table: 330a8000  DAC: 00000017
Process khubd (pid: 152, stack limit = 0xc3866270)
Stack: (0xc3867c68 to 0xc3868000)
7c60:                   c0093fdc c0094088 000000d0 000000d0 00000000 000080d0
7c80: 00000000 a0000013 c39ebec0 c3800600 000080d0 00000001 c03f13cc 00000006
7ca0: c02b36f0 c0094574 c0043428 0001c9de c39ebec0 c39ebea0 c3000c00 c02a6a84
7cc0: 89705f41 c3000c00 c39ebec0 c39ebea0 c3000c00 bf036f24 c39ebec8 00000006
7ce0: 00000000 c3000c00 c39ebec0 c39ebea0 c3000c00 bf036f24 c39ebec8 00000006
7d00: 00000000 bf003398 c00aa514 c3867d20 0000a1ff c00e1448 c39d9f84 c39aabe8
7d20: c3867d50 c00e1888 c39aabe8 c39ebea0 c39ebec0 bf036ebc c3000c00 bf036f24
7d40: 0000bec8 01000000 00000000 c39ebea0 c39ebec0 bf036ebc c3000c00 bf036f24
7d60: c39ebec8 00000000 00000000 c0223798 c39ebec0 c01daa14 bf036eec c3867da0
7d80: c045a4f8 c01da6e4 c39ebec0 00000000 c01daa14 c39ebec0 c3867da0 c01d9870
7da0: c38331a8 c39fcb94 c005b3b4 c39ebec0 c39ebec0 c39ebef4 00000000 c01da890
7dc0: c39ebec0 c39ebec0 c3000c00 c01d97f4 00000000 c01d8470 c39ebea0 c3000c68
7de0: 00000000 c3000c68 c3218a00 c3abcd20 00000001 c39ebec0 c39ebea0 c3000c00
7e00: 00000000 c3000c68 c3218a00 c3abcd20 00000001 c0221ee8 00000001 00000000
7e20: 00000000 00000000 00001388 00000000 c3000c04 c3000c68 c3bc29c0 00000001
7e40: c3bc29c4 00000001 c03f4af8 00000000 c39fe780 c3000c00 00000001 c045ab04
7e60: c3867eb8 c045a3bc c3000c70 00000000 00000000 c0229238 c3000c68 c0223210
7e80: c3000c00 c045aaf0 c045ab04 c0223230 c3000c68 c01daa14 c045ab04 c01da6e4
7ea0: c3000c68 00000000 c01daa14 c3000c68 c3867eb8 c01d9870 c38331a8 c3862f54
7ec0: c005b3b4 c3000c68 c3000c68 c3000c9c 00000002 c01da890 c3867ef9 c3000c68
7ee0: c3829f60 c01d97f4 00000000 c01d8470 c38918e0 c3aaf468 39383102 c300343a
7f00: 00000001 c0219660 c03f1768 c3000c00 00000000 c3000c68 00000002 c3aaf814
7f20: 00000001 00000101 c38918e0 c021b6e0 00000002 00000000 00000000 c3000c00
7f40: c38917c0 c021c418 00000064 00000064 00000101 c3867f60 c005b920 c3867f94
7f60: c3891830 c3aaf400 c3866000 c3aaf400 c3aaf800 00000000 c38918e0 c3aaf400
7f80: 00000012 00000000 00000000 c3837920 c00574a0 c3867f94 c3867f94 00000101
7fa0: 01010001 c3867fd4 c381bf48 c3867fd4 c381bf48 00000000 c021ba3c 00000000
7fc0: 00000000 00000000 00000000 c00573dc 00000000 00000000 c3867fd8 c3867fd8
7fe0: 00000000 00000000 00000000 00000000 00000000 c002ce88 00000000 ffff0000
[<c002fb10>] (__bug+0x1c/0x28) from [<c0094088>] (cache_alloc_refill+0x13c/0x594)
[<c0094088>] (cache_alloc_refill+0x13c/0x594) from [<c0094574>] (__kmalloc+0x94/0xd0)
[<c0094574>] (__kmalloc+0x94/0xd0) from [<c02a6a84>] (alloc_netdev_mq+0x48/0x1b0)
[<c02a6a84>] (alloc_netdev_mq+0x48/0x1b0) from [<bf003398>] (vntwusb_found1+0x58/0x53c [vt6656_stage])
[<bf003398>] (vntwusb_found1+0x58/0x53c [vt6656_stage]) from [<c0223798>] (usb_probe_interface+0x130/0x180)
[<c0223798>] (usb_probe_interface+0x130/0x180) from [<c01da6e4>] (driver_probe_device+0xac/0x164)
[<c01da6e4>] (driver_probe_device+0xac/0x164) from [<c01d9870>] (bus_for_each_drv+0x50/0x90)
[<c01d9870>] (bus_for_each_drv+0x50/0x90) from [<c01da890>] (device_attach+0x50/0x68)
[<c01da890>] (device_attach+0x50/0x68) from [<c01d97f4>] (bus_probe_device+0x28/0x54)
[<c01d97f4>] (bus_probe_device+0x28/0x54) from [<c01d8470>] (device_add+0x3b4/0x4f0)
[<c01d8470>] (device_add+0x3b4/0x4f0) from [<c0221ee8>] (usb_set_configuration+0x524/0x5b8)
[<c0221ee8>] (usb_set_configuration+0x524/0x5b8) from [<c0229238>] (generic_probe+0x5c/0xa0)
[<c0229238>] (generic_probe+0x5c/0xa0) from [<c0223230>] (usb_probe_device+0x48/0x54)
[<c0223230>] (usb_probe_device+0x48/0x54) from [<c01da6e4>] (driver_probe_device+0xac/0x164)
[<c01da6e4>] (driver_probe_device+0xac/0x164) from [<c01d9870>] (bus_for_each_drv+0x50/0x90)
[<c01d9870>] (bus_for_each_drv+0x50/0x90) from [<c01da890>] (device_attach+0x50/0x68)
[<c01da890>] (device_attach+0x50/0x68) from [<c01d97f4>] (bus_probe_device+0x28/0x54)
[<c01d97f4>] (bus_probe_device+0x28/0x54) from [<c01d8470>] (device_add+0x3b4/0x4f0)
[<c01d8470>] (device_add+0x3b4/0x4f0) from [<c021b6e0>] (usb_new_device+0x100/0x174)
[<c021b6e0>] (usb_new_device+0x100/0x174) from [<c021c418>] (hub_thread+0x9dc/0xeec)
[<c021c418>] (hub_thread+0x9dc/0xeec) from [<c00573dc>] (kthread+0x78/0x80)
[<c00573dc>] (kthread+0x78/0x80) from [<c002ce88>] (kernel_thread_exit+0x0/0x8)
Code: e1a01000 e59f000c eb005014 e3a03000 (e5833000)
---[ end trace 2a51e0dbab9e4fbe ]---
note: khubd[152] exited with preempt_count 1
Signed-off-by: miaofng <miaofng@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch prevents the driver from calling misc_deregister twice on the same
ressouce when unloading the driver.
Unloading the driver without this patch results in a Kernel BUG like this:
Panel driver version 0.9.5 registered on parport0 (io=0x378).
BUG: unable to handle kernel paging request at 0000000000100108
IP: [<ffffffff803c02ee>] misc_deregister+0x2d/0x90
PGD 6caff067 PUD 762b7067 PMD 0
Oops: 0002 [#1] PREEMPT SMP
last sysfs file: /sys/devices/platform/w83627hf.656/in8_input
...

This patch fixes this issue, although maybe not in the best way possible :)

linux version v2.6.32-rc1 - linus git tree, Di 29. Sep 01:10:18 CEST 2009
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add missing #includes to make hv module compile successfull.
Signed-off-by: Milan Dadok <milan@dadok.name>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Remove incorrect list_head usage. Variable of type list_head was used in
some function's arguments as list item.
Signed-off-by: Milan Dadok <milan@dadok.name>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix typos in udev event send and guid variables copy
Signed-off-by: Milan Dadok <milan@dadok.name>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix vmbus load hang caused by wrong data packing.

Signed-off-by: Hank Janssen<hjanssen@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix null pointer error after vmbus loading. Remove code that checks for
dev_name, the affected structure is kzalloc-ed prior to this routine, so
it is always null at this stage.
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Update for more items
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>