Signed-off-by: Dmitri Monakhov <dmonakhov@openvz.org>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Joel Becker <Joel.Becker@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

In ocfs2/xattr, we must make sure the xattrs which have the same hash value
exist in the same bucket so that the search schema can work. But in the old
implementation, when we want to extend a bucket, we just move half number of
xattrs to the new bucket. This works in most cases, but if we are lucky
enough we will move 2 xattrs into 2 different buckets. This means that an
xattr from the previous bucket cannot be found anymore. This patch fix this
problem by finding the right position during extending the bucket and extend
an empty bucket if needed.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Cc: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

In ocfs2_page_mkwrite, we return -EINVAL when we found the page mapping
isn't updated, and it will cause the user space program get SIGBUS and
exit. The reason is that during race writeable mmap, we will do
unmap_mapping_range in ocfs2_data_downconvert_worker. The good thing is
that if we reuturn 0 in page_mkwrite, VFS will retry fault and then
call page_mkwrite again, so it is safe to return 0 here.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Patch sets journal descriptor to NULL after the journal is shutdown.
This ensures that jbd2_journal_release_jbd_inode(), which removes the
jbd2 inode from txn lists, can be called safely from ocfs2_clear_inode()
even after the journal has been shutdown.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

On failure, ocfs2_start_trans() returns values like ERR_PTR(-ENOMEM),
so we should check whether handle is NULL. Fix them to use IS_ERR().
Jan has made the patch for other part in ocfs2(thank Jan for it), so
this is just the fix for fs/ocfs2/xattr.c.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

We forgot to set i_nlink to 0 when returning due to error from ocfs2_mknod_locked()
and thus inode was not properly released via ocfs2_delete_inode() (e.g. claimed
space was not released). Fix it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

new_inode() does not return ERR_PTR() but NULL in case of failure. Correct
checking of the return value.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

On failure, ocfs2_start_trans() returns values like ERR_PTR(-ENOMEM).
Thus checks for !handle are wrong. Fix them to use IS_ERR().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Fix some typos in the xattr annotations.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Reported-by: Coly Li <coyli@suse.de>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Since now ocfs2 supports empty xattr buckets, we will never remove
the xattr index tree even if all the xattrs are removed, so this
function will never be called. So remove it.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

ocfs2_xattr_block_get() looks up the xattr in a startlingly familiar
way; it's identical to the function ocfs2_xattr_block_find().  Let's just
use the later in the former.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

There are a couple places that get an xattr bucket that may be reading
an existing one or may be allocating a new one.  They should specify the
correct journal access mode depending.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

The ocfs2_xattr_update_xattr_search() function can return an error when
trying to read blocks off of disk.  The caller needs to check this error
before using those (possibly invalid) blocks.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

If the xattr disk structures are corrupt, return -EIO, not -EFAULT.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

The xattr.c code is currently memcmp()ing naking buffer pointers.
Create the OCFS2_IS_VALID_XATTR_BLOCK() macro to match its peers and use
that.

In addition, failed signature checks were returning -EFAULT, which is
completely wrong.  Return -EIO.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Make the handler_map array as large as the possible value range to avoid
a fencepost error.

[ Utilize alternate method -- Joel ]
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Include/linux/xattr.h already has the definition about xattr prefix,
so remove the duplicate definitions in xattr.c.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

Because we merged the xattr sources into one file, some functions
no longer belong in the header file.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

This patch fixes the license in xattr.c and xattr.h.
Signed-off-by: Tiger Yang <tiger.yang@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Make the HP EliteBook 8530p use AD1884A model laptop
  ALSA: gusextreme: Fix build errors
  ALSA: hdsp: check for iobox and upload firmware during ioctl
  ALSA: HDSP: check for io box before uploading firmware
  ALSA: hda - Add another HP model (6730s) for AD1884A
  alsa: fix snd_BUG_on() and friends
  ALSA: hda - Add a quirk for MEDION MD96630
  ALSA: hda - Limit the number of GPIOs show in proc

Added a QUIRK to patch_analog.c for the HP Elitebook 8530p
(IDs 0x103c:0x30e7) to use AD1884A model 'laptop' by default.
Playback and Capture confirmed working.
Signed-off-by: Travis Place <wishie@wishie.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch reverts the following three commits which convert libata to
use block layer tagging.

 43a49cbd
 e013e13b
 2fca5ccf

Although using block layer tagging is the right direction, due to the
tight coupling among tag number, data structure allocation and
hardware command slot allocation, libata doesn't work correctly with
the current conversion.

The biggest problem is guaranteeing that tag 0 is always used for
non-NCQ commands.  Due to the way blk-tag is implemented and how SCSI
starts and finishes requests, such guarantee can't be made.  I'm not
sure whether this would actually break any low level driver but it
doesn't look like a good idea to break such assumption given the
frailty of ATA controllers.

So, for the time being, keep using the old dumb in-libata qc
allocation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axobe <jens.axboe@oracle.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gusextreme depends on opl3 support. Add the approriate select to Kconfig.
Also remove the unnecessary hwdep select.

Relevant build errors:
ERROR: "snd_opl3_hwdep_new" [sound/isa/gus/snd-gusextreme.ko] undefined!
ERROR: "snd_opl3_create" [sound/isa/gus/snd-gusextreme.ko] undefined!
Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

It's showing up as regressions; disabling it very likely just papers
over an underlying issue, but time is running out for 2.6.28, lets get
back to this for 2.6.29

Fixes: #11826 and #11893
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: Fixup deb-pkg target to generate separate firmware deb

The below is a simplistic fix for "make deb-pkg"; it splits the
firmware out to a linux-firmware-image package and adds an
(unversioned) Suggests to the linux package for this firmware.
Signed-Off-By: Jonathan McDowell <noodles@earth.li>
Acked-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

The "Exclude staging drivers" question is there so that we don't build
staging drivers for allyesconfig or allnoconfig settings, but it's very
irritating when you've already said "no" to staging drivers earlier.

There is absolutely no point in declining twice - once you've declined
the staging drivers, you're done.

So make the second question depend on the first question having been
answered in the affirmative.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-2.6.28' of git://linux-nfs.org/~bfields/linux:
  Fix nfsd truncation of readdir results

* 'cpus4096' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  cpumask: introduce new API, without changing anything, v3
  cpumask: new API, v2
  cpumask: introduce new API, without changing anything

Commit 8d7c4203 "nfsd: fix failure to set eof in readdir in some
situations" introduced a bug: on a directory in an exported ext3
filesystem with dir_index unset, a READDIR will only return about 250
entries, even if the directory was larger.

Bisected it back to this commit; reverting it fixes the problem.

It turns out that in this case ext3 reads a block at a time, then
returns from readdir, which means we can end up with buf.full==0 but
with more entries in the directory still to be read.  Before 8d7c4203
(but after c002a6c7 "Optimise NFS readdir hack slightly"), this would
cause us to return the READDIR result immediately, but with the eof bit
unset.  That could cause a performance regression (because the client
would need more roundtrips to the server to read the whole directory),
but no loss in correctness, since the cleared eof bit caused the client
to send another readdir.  After 8d7c4203, the setting of the eof bit
made this a correctness problem.

So, move nfserr_eof into the loop and remove the buf.full check so that
we loop until buf.used==0.  The following seems to do the right thing
and reduces the network traffic since we don't return a READDIR result
until the buffer is full.

Tested on an empty directory & large directory; eof is properly sent and
there are no more short buffers.
Signed-off-by: Doug Nazar <nazard@dragoninc.ca>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

Impact: cleanup

Clean up based on feedback from Andrew Morton and others:

 - change to inline functions instead of macros
 - add __init to bootmem method
 - add a missing debug check
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Previously I assumed that the receive queues of candidates don't
change during the GC.  This is only half true, nothing can be received
from the queues (see comment in unix_gc()), but buffers could be added
through the other half of the socket pair, which may still have file
descriptors referring to it.

This can result in inc_inflight_move_tail() erronously increasing the
"inflight" counter for a unix socket for which dec_inflight() wasn't
previously called.  This in turn can trigger the "BUG_ON(total_refs <
inflight_refs)" in a later garbage collection run.

Fix this by only manipulating the "inflight" counter for sockets which
are candidates themselves.  Duplicating the file references in
unix_attach_fds() is also needed to prevent a socket becoming a
candidate for GC while the skb that contains it is not yet queued.
Reported-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, all existing users of cnt32_to_63() are fine since the CPU
architectures where it is used don't do read access reordering, and user
mode preemption is disabled already.  It is nevertheless a good idea to
better elaborate usage requirements wrt preemption, and use an explicit
memory barrier on SMP to avoid different CPUs accessing the counter
value in the wrong order.  On UP a simple compiler barrier is
sufficient.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: struct device - replace bus_id with dev_name(), dev_set_name()
  mmc: increase SD write timeout for crappy cards

Use menuconfig instead of flat configs so that you can disable/enable
regulator items with one selection.  Also, use depends instead of
reverse selections to make life easier, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

currently, the error message when trying to run hdspmixer or hdspconf
if the breakout box is not connected is somehow misleading, since it
asks the user to upload the firmware.

this patch adds a test, whether the breakout box is connected and
tries to upload the firmware in the case, that it is not present, e.g.
because of power failures of the breakout box.

[Minor coding-style fixes by tiwai]
Signed-off-by: Tim Blechmann <tim@klingt.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

currently the hdsp driver tries to upload the firmware, even if the
io box is not connected. this patch adds a check for the io box
before trying to upload the firmware.
thus instead of messages complaining about the fifo status and firmware
loading failure, the driver gives a message that no multiface or
digiface is connected.

[A minor coding-style fix by tiwai]
Signed-off-by: Tim Blechmann <tim@klingt.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added model=laptop for another HP machine (103c:3614) with AD1884A
codec.
Signed-off-by: Michel Marti <mma@objectxp.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>