- 13 Jun, 2005 7 commits
-
-
David Brownell authored
This makes the EHCI driver spin a bit longer before concluding that the port reset failed. "Obviously safe." It allows some devices to enumerate that previously didn't. We've seen a bunch of these problem reports recently, this will make some go away. As reported by Michael Zapf <Michael.Zapf@uni-kassel.de>, some EHCI controllers seem to take forever to finish port resets and produce "port N reset error -110" type errors. Spinning a bit longer helps. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Alan Cox authored
The pwc chainsaw session left some setups not working. There is a sanity check on compression buffers that simply isn't right any more as we never allocate one. This doesn't address the email and other changes. I'll do those tomorrow if I get time, but it is the minimal fix for the code and basic feature set. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Benjamin Herrenschmidt authored
The current radeonfb memset's the framebuffer to 0 when loaded. This removes occasional artifacts but has the nasty side effect that if you load radeonfb without framebuffer console, you destroy the VGA text buffer, font, etc... radeon must not touch the framebuffer content when it doesn't "own" it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Geert Uytterhoeven authored
M68k: Mark Sun-3 NCR5380 SCSI broken until NCR5380_abort() and NCR5380_bus_reset() are replaced with real new-style EH routines (the old EH SCSI constants were removed in 2.6.12-rc3). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Geert Uytterhoeven authored
Now m68k no longer sets HAVE_ARCH_GET_SIGNAL_TO_DELIVER, can it be removed completely? Or may ARM26 still need it? Note that its usage was removed from kernel/signal.c about 2 months ago. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Geert Uytterhoeven authored
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 12 Jun, 2005 1 commit
-
-
David Brownell authored
Patch from David Brownell The ARM generic Kconfig filters out IDE options ... except for an error prone ARMload of special cases. This adds one general case to the systems that will offer IDE options: kernels with PCMCIA support, which probably want to use IDE to access CompactFlash cards. This might allow many (most?) of the other cases to disappear, for systems that only see IDE hardware through CF cards. Right now this one patch is used to gate access to CF cards, including MicroDrives, for both omap_cf and at91_cf drivers. Signed-off-by: David Brownell Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
- 11 Jun, 2005 2 commits
-
- 10 Jun, 2005 4 commits
-
-
Linus Torvalds authored
The patch to add them keeps on getting applied, over and over again ;) Hopefully no more.
-
Dave Airlie authored
This removes a bogus hack from the radeon IRQ handler. There is a better fix from myself and benh in DRM CVS but I'll wait until 2.6.13-rc so it gets more testing. Signed-off-by: Dave Airlie <airlied@linux.ie>
-
Dave Airlie authored
Add pci identifier for i945G chipset Signed-off-by: Dave Airlie <airlied@linux.ie>
-
Benjamin Herrenschmidt authored
Despite all the care lately in making the powermac sleep/wakeup as robust as possible, there is still a nasty related to the use of cpufreq on PMU based machines. Unfortunately, it affects paulus old powerbook so I have to fix it :) We didn't manage to understand what is precisely going on, it leads to memory corruption and might have to do with RAM not beeing properly refreshed when a cpufreq transition is done right before the sleep. The best workaround (and less intrusive at this point) we could come up with is included in this patch. We basically do _not_ force a switch to high speed on suspend anymore (that is what is causing the problem) on those machines. We still force a speed switch on wakeup (since we don't know what speed we are coming back from sleep at, and that seems to work fine). Since, during this short interval, the actual CPU speed might be incorrect, we also hack around by multiplying loops_per_jiffy by 2 (max speed factor on those machines) during early wakeup stage to make sure udelay's during that time aren't too short. For after 2.6.12, we'll change udelay implementation to use the CPU timebase (which is always constant) instead like we do on ppc64 and thus get rid of all those problems. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
- 09 Jun, 2005 20 commits
-
-
Michael Ellerman authored
My patch from a few weeks back (now in mainline), called "Cleanup skbs to prevent unregister_netdevice() hanging", can cause our TX timeout code to fire on machines with lots of VLANs (because it takes > 2 seconds between when we stop the queues and when we're finished stopping the connections). When that happens the TX timeout code freaks out and does a WARN_ON() because as far as it's concerned there shouldn't be a TX timeout happening, which is fair enough. I have a "proper" fix for this, which is to a) do refcounting on connections and b) implement a proper ack timer so we don't keep unacked skbs lying around for ever. But for 2.6.12 I propose just supressing the WARN_ON(). Users will still see the "NETDEV WATCHDOG" warning, but that's not nearly as bad as a WARN_ON() which users interpret as an Oops. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Eugene Surovegin authored
Add a definition for PPC 405EP which was lost somehow during 2.4 -> 2.6 transition. Recent change to arch/ppc/kernel/misc.S ("Fix incorrect CPU_FTR fixup usage for unified caches") triggered this bug and 405EP boards don't boot anymore. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Narendra Sankar authored
MSI functionality is broken on the GC_LE x86 chipset that Serverworks developed and that is being used in various platforms today. Broadcom is going to push out to the kernel MSI enabled Gigabit drivers (in the very near future), and we would like to make sure that MSI does not get enabled on any platforms using the GC_LE chipset (device id 0x17). Following the AMD 8131 example, I am including a patch to disable MSI functionality when a GCNB_LE is detected. Please let me know if there are any issues with this. This is a permanent fix for this chipset, as the hardware will not be updated. Signed-off-by: Narendra Sankar <nsankar@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Steve French authored
and add_to_page_cache fails. Thanks to Shaggy for pointing out the fix. Signed-off-by: Steve French (sfrench@us.ibm.com) Signed-off-by: Shaggy (shaggy@us.ibm.com)
-
Vincent Sanders authored
Patch from Vincent Sanders This fixes the "multiple definitions of cpufreq_get" build faliure on the hackkit SA1100 platform. Signed-off-by: Vincent Sanders Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Vincent Sanders authored
Patch from Vincent Sanders This fixes the "multiple definitions of cpufreq_get" build faliure on the Badge4 SA1100 platform. Signed-off-by: Vincent Sanders Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Christoph Lameter authored
current->blocked will be set to the value of current->thread_info->flags if the cmpxchg to update thread_info->flags fails. For performance reasons the store into current->blocked was placed in the cmpxchg loop. However, the cmpxchg overwrites the register holding the value to be stored. In the rare case of a retry the value of thread_info->flags will be written into current->blocked. The fix is to use another register so that the register containing the current->blocked value is not overwritten. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
-
Dave Neuer authored
Patch from Dave Neuer This fixes the "multiple definitions of cpufreq_get" errors on StrongARM-based iPAQs. Signed-off-by: Dave Neuer Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
Linus Torvalds authored
-
Russell King authored
Remove the remaining zero byte file left over from the Xscale fixes. Signed-off-by: Russell King <rmk@arm.linux.org.uk>
-
Ian Abbott authored
ftdi_sio: Avoid losing bytes at tty-ldisc. This patch was originally developed by Daniel Smertnig. I (Ian Abbott) made a few changes. It has been tested by both Daniel and I, at least for raw, non-canonical receive data processing. Here is Daniel's original description of the patch: === During a project in which I was using a FTDI 232BM to transmit data at relative high speeds (625kBit/s), I noticed a problem where data was lost even if flow control was enabled: The FTDI-Driver receives 512 Bytes of data over USB at a time, which consists of 8 64-Byte packets. Subtracting the 2 bytes of status information included in each packet this gives 496 "real" data bytes per read. This data is passed (indirectly, via the flip buffers) to the tty line discipline which takes care of throttling when there the free buffer space reaches TTY_THRESHOLD_THROTTLE (128). Because the FTDI driver processes up to 496 bytes at a time, throttling won't happen in time and the line discipline will discard the remaining bytes. To avoid this the patch passes data in 62-byte blocks to the tty layer and checks the available space in the ldisc-buffers. If there isn't enough free space, processing the rest of the data is delayed using a workqueue. Note: The original problem should be easily reproducible with a userspace program which does slow & small reads. === Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Daniel Smertnig <daniel.smertnig@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Pete Zaitcev authored
This smoothes two imperfections: - Increase number of LUNs per device from 4 to 9. The best solution would be to remove this limit altogether, but that has to wait until the time when more than 26 hosts are allowed. - Replace mdelay with msleep in a probing routine. Signed-off-by: Pete Zaitcev <zaitcev@yahoo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Scott Murray authored
Here's a patch that fixes up the pci_dev refcounting in the CPCI code. I've done some testing against it and it seems fine here. Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Albert Lee authored
Problem: Incorrect md5sum when using ATAPI PIO mode to verify a distro CD. Root cause: sg traverse problem. In __atapi_pio_bytes(), if qc->cursg++ is increased and "goto next_page" is executed, then sg is not updated to the new qc->cursg and the old sg is overwritten with the new data. Changes: - Replace "goto next_page" with "goto next_sg" to make sg updated. Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
-
Jens Axboe authored
Correct this. diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
-
- 08 Jun, 2005 6 commits
-
-
Paul Mackerras authored
This patch fixes some bugs in the ppc64 PER_LINUX32 implementation, noted by Juergen Kreileder: * uname(2) doesn't respect PER_LINUX32, it returns 'ppc64' instead of 'ppc' * Child processes of a PER_LINUX32 process don't inherit PER_LINUX32 Along the way I took the opportunity to move things around so that sys_ppc32.c only has 32-bit syscall emulation functions and to remove the obsolete "fakeppc" command line option. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Lars Marowsky-Bree authored
READA errors failing with EWOULDBLOCK/EAGAIN do not constitute a valid reason for failing the path; this lead to erratic errors on DM multipath devices. This error can be safely propagated upwards without failing the path. Acked-by: Kevin Corry <kevcorry@us.ibm.com> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: Lars Marowsky-Bree <lmb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Peter Chubb authored
There've been reports of problems with CONFIG_PREEMPT=y and the high floating point partition. This is caused by the possibility of preemption and rescheduling on a different processor while saving or restioirng the high partition. The only places where the FPU state is touched are in ptrace, in switch_to(), and where handling a floating-point exception. In switch_to() preemption is off. So it's only in trap.c and ptrace.c that we need to prevent preemption. Here is a patch that adds commentary to make the conditions clear, and adds appropriate preempt_{en,dis}able() calls to make it so. In trap.c I use preempt_enable_no_resched(), as we're about to return to user space where the preemption flag will be checked anyway. Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Ananth N Mavinakayanahalli authored
Remove spurious MSR_SE reset during kprobe processing. single_step_exception() already does it for us. Reset it to be safe when executing the fault_handler. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>