* Remove ide_unregister() call from ide_exit()
  (host drivers take care of unregistering hwif-s themselves).

* Remove ide_unregister() call from probe methods of
  bast-ide, palm_bk3710, ide-cs and delkin_cb host drivers
  (ide_find_port() returns only free ide_hwifs[] entries).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Rename ide_noacpi{tfs,onboot} to ide_acpi{gtf,onboot} (+ reverse logic).

* Move ide_*acpi* variables to ide-acpi.c and remove unnecessary initializers.

* Add "noacpi" / "acpigtf" / "acpionboot" parameters.

* Obsolete "ide=noacpi" / "ide=acpigtf" / "ide=acpionboot" kernel parameters.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add "doubler" parameter to enable support for IDE doublers.

* Obsolete "ide=doubler" kernel parameter.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add "cdrom=" and "chs=" parameters.

* Obsolete "hdx=cdrom" and "hdx=cyls,heads,sects" kernel parameters.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add "nodma|noflush|noprobe|nowerr=" parameters.

* Obsolete "hdx=noprobe|none|nowerr|nodma|noflush" kernel parameters.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove obsoleted "hdx=autotune" kernel parameter
  (we always auto-tune PIO if possible nowadays).

* Remove no longer needed ide_drive_t.autotune flag.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Don't set IDE_HFLAG_NO_AUTOTUNE host flag in sgiioc4 and icside
  host drivers - there is no need for it as they don't implement
  ->set_pio_mode method.

* Remove no longer needed IDE_HFLAG_NO_AUTOTUNE host flag.

There should be no functional changes caused by this patch.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Default to tuning PIO0 and disabling prefetch prior to probing
  devices for CONFIG_BLK_DEV_CMD640_ENHANCED=y case.

* Always auto-tune PIO.

* Remove no longer used retrieve_drive_counts().
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

We have "vlb|pci_clock=" parameters now.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add "vlb_clock=" parameter for specifying VLB clock frequency (in MHz).

* Add "pci_clock=" parameter for specifying PCI bus clock frequency (in MHz).

While at it:

* qd65xx.c: rename {active,recovery}_cycle variables to {act,rec}_cyc.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Bart:
- merge "ide-tape: remove pipeline-specific code from idetape_setup" patch
- cleanup __idetape_discard_read_pipeline()
- cleanup idetape_empty_write_pipeline()
- fix 't' assignment in idetape_setup()
- fix idetape_blkdev_ioctl() w.r.t. 'nr_stages'
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

[bart: sync patch with current code and fix idetape_init_read()]
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The driver is using now solely its own request queue.

- tape->next_stage is always NULL so it is safe to remove
  all code depending on tape->next_stage != NULL

- this patch removes the last place which sets
  IDETAPE_FLAG_PIPELINE_ACTIVE in tape->flags

[bart: add above explanations]
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

idetape_queue_pc_tail() is a wrapper for its __idetape_queue_pc_tail() counterpart
and has no other functionality. Remove it and call the "wrapped" function
directly.
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

As a side effect, remove unused idetape_kfree_stage() and
idetape_abort_pipeline()

[bart: resurrect taking tape->lock + clearing IDETAPE_FLAG_PIPELINE_ACTIVE]
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

The computation of the block offset of the the tape position (MTIOCPOS,
MTIOCGET) is not influenced by the stages queued in the pipeline anymore but by
the size of the current buffer which is going to be sent to the drive.

[bart: resurrect deleted idetape_wait_for_pipeline() call]
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Since we don't do pipeline read-ahead anymore, we don't have to look for
filemarks we have crossed. Therefore, remove the code chunk that does that and
pass on the command to the tape. As a side effect, remove unused
idetape_wait_first_stage().
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

In order to do away with queueing read requests on the pipeline, several things
have to be done:

1. Do not allocate additional pipeline stages in idetape_init_read() until
(tape->nr_stages < max_stages) and do only read operation preparations. As a
collateral result, idetape_add_stage_tail() becomes unused so remove it.

2. Queue the read request's buffer directly thru idetape_queue_rw_tail().

3. Remove now unused idetape_kmalloc_stage() and idetape_switch_buffers().

[bart: simplify the original patch]
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Pipeline handling calculations in idetape_calculate_speeds() can
go since they do not have any effect on other functionality besides:

1. info is only being exported through /proc as a read-only item
(controlled_pipeline_head_speed, uncontrolled_pipeline_head_speed)

2. used in idetape_restart_speed_control() which, in turn, is unrelated to
other code

3. used only for pipeline frames number accounting (tape->pipeline_head),
also unused elsewhere.

4.some variables are:
        only written to: tape->buffer_head;
        unused: tape->tape_head, tape->last_tape_head
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Refrain from adding more write requests to the pipeline and queue them
directly on the device's request queue instead.

[bart: re-do for minimal behavior changes]
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Prior to allocating a new pipeline stage, the code checked for the existence of
a cached pipeline stage to use. Do away with and stick to normal pipeline
stages only.

[bart: keep idetape_kmalloc_stage() for now]
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove obsoleted "hdx=noautotune" kernel parameter
(it has been obsoleted since 1 Nov 2004).

Then make ide_hwif_t.autotune a single bit flag
and remove no longer needed IDE_TUNE_* defines.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove obsoleted "idex=" kernel parameters.

* Make probe_* and cmd640_vlb variables static.

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove obsoleted "idex=reset" kernel parameter
(it has been obsoleted since 1 Nov 2004).

Then remove corresponding code from ide_probe_port()
and no longer used ->reset field from ide_hwif_t.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove obsoleted "idex=serialize" kernel parameter
(it has been obsoleted since 1 Nov 2004).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add "ignore_cable" parameter:

* "ide_core.ignore_cable=[interface_number]" boot option if IDE is built-in
  (i.e. "ide_core.ignore_cable=1" to force ignoring cable for "ide1")

* "ignore_cable=[interface_number]" module parameter (for ide_core module)
  if IDE is compiled as module

v2:
* Add ide_port_apply_params() helper
  - use it in ide_device_add_all() and ide_scan_port().

* Make it possible to later disable ignoring cable detection by passing
  "[interface_number]:0" to /sys/module/ide_core/parameters/ignore_cable
  (however sysfs interface is not enabled yet since it needs some other
   IDE changes to make it work reliable).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

	Fallout from commit ac95beedSigned-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootmem-v3

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-bootmem-v3:
  x86_64/mm: check and print vmemmap allocation continuous
  x86_64: fix setup_node_bootmem to support big mem excluding with memmap
  x86_64: make reserve_bootmem_generic() use new reserve_bootmem()
  mm: allow reserve_bootmem() cross nodes
  mm: offset align in alloc_bootmem()
  mm: fix alloc_bootmem_core to use fast searching for all nodes
  mm: make mem_map allocation continuous

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  kbuild: scripts/Makefile.modpost typo fix
  kbuild: soften MODULE_LICENSE check

On big systems with lots of memory, don't print out too much during
bootup, and make it easy to find if it is continuous.

on 256G 8 sockets system will get
 [ffffe20000000000-ffffe20002bfffff] PMD -> [ffff810001400000-ffff810003ffffff] on node 0
[ffffe2001c700000-ffffe2001c7fffff] potential offnode page_structs
 [ffffe20002c00000-ffffe2001c7fffff] PMD -> [ffff81000c000000-ffff8100255fffff] on node 0
[ffffe20038700000-ffffe200387fffff] potential offnode page_structs
 [ffffe2001c800000-ffffe200387fffff] PMD -> [ffff810820200000-ffff81083c1fffff] on node 1
 [ffffe20040000000-ffffe2007fffffff] PUD ->ffff811027a00000 on node 2
 [ffffe20038800000-ffffe2003fffffff] PMD -> [ffff811020200000-ffff8110279fffff] on node 2
[ffffe20054700000-ffffe200547fffff] potential offnode page_structs
 [ffffe20040000000-ffffe200547fffff] PMD -> [ffff811027c00000-ffff81103c3fffff] on node 2
[ffffe20070700000-ffffe200707fffff] potential offnode page_structs
 [ffffe20054800000-ffffe200707fffff] PMD -> [ffff811820200000-ffff81183c1fffff] on node 3
 [ffffe20080000000-ffffe200bfffffff] PUD ->ffff81202fa00000 on node 4
 [ffffe20070800000-ffffe2007fffffff] PMD -> [ffff812020200000-ffff81202f9fffff] on node 4
[ffffe2008c700000-ffffe2008c7fffff] potential offnode page_structs
 [ffffe20080000000-ffffe2008c7fffff] PMD -> [ffff81202fc00000-ffff81203c3fffff] on node 4
[ffffe200a8700000-ffffe200a87fffff] potential offnode page_structs
 [ffffe2008c800000-ffffe200a87fffff] PMD -> [ffff812820200000-ffff81283c1fffff] on node 5
 [ffffe200c0000000-ffffe200ffffffff] PUD ->ffff813037a00000 on node 6
 [ffffe200a8800000-ffffe200bfffffff] PMD -> [ffff813020200000-ffff8130379fffff] on node 6
[ffffe200c4700000-ffffe200c47fffff] potential offnode page_structs
 [ffffe200c0000000-ffffe200c47fffff] PMD -> [ffff813037c00000-ffff81303c3fffff] on node 6
 [ffffe200c4800000-ffffe200e07fffff] PMD -> [ffff813820200000-ffff81383c1fffff] on node 7

instead of a very long print out...
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

typical case: four sockets system, every node has 4g ram, and we are using:

	memmap=10g$4g

to mask out memory on node1 and node2

when numa is enabled, early_node_mem is used to get node_data and node_bootmap.

if it can not get memory from the same node with find_e820_area(), it will
use alloc_bootmem to get buff from previous nodes.

so check it and print out some info about it.

need to move early_res_to_bootmem into every setup_node_bootmem.
and it takes range that node has. otherwise alloc_bootmem could return addr
that reserved early.

depends on "mm: make reserve_bootmem can crossed the nodes".
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>