- 16 Oct, 2007 28 commits
-
-
Lachlan McIlroy authored
SGI-PV: 971603 SGI-Modid: xfs-linux-melb:xfs-kern:29871a Signed-off-by:
Lachlan McIlroy <lachlan@sgi.com> Signed-off-by:
David Chinner <dgc@sgi.com> Signed-off-by:
Tim Shimmin <tes@sgi.com>
-
Lachlan McIlroy authored
In xfs_fs_sync_super() treat a sync the same as a filesystem freeze. This is needed to force the log to disk for inodes which are not marked dirty in the Linux inode (the inodes are marked dirty on completion of the log I/O) and so sync_inodes() will not flush them. In xfs_fs_write_inode() a synchronous flush will not get an EAGAIN from xfs_inode_flush() and if an asynchronous flush returns EAGAIN we should pass it on to the caller. If we get an error while flushing the inode then re-dirty it so we can try again later. SGI-PV: 971670 SGI-Modid: xfs-linux-melb:xfs-kern:29860a Signed-off-by:
-
Lachlan McIlroy authored
Here 'agino' increments through the inodes in an allocation group. At the end of the innermost 'for' loop it will hold the value of the next inode to look at (ie the first inode in the next cluster/chunk). Assigning 'lastino' to 'agino' resets it to the last inode in the last inode cluster we just looked at. This causes us to look up the very same cluster and examine all the inodes all over again, and again, and again... We also want to set 'lastino' for the cases when we're not interested in the inode so that the next call to bulkstat won't re-examine the same uninteresting inodes. SGI-PV: 971064 SGI-Modid: xfs-linux-melb:xfs-kern:29840a Signed-off-by:
-
Christoph Hellwig authored
Simplify the prototype for xfs_create/xfs_mkdir/xfs_symlink by not passing down a bhv_vattr_t that just hogs stack space. Instead pass down the mode in a mode_t and in case of xfs_create the rdev as a scalar type as well. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29794a Signed-off-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
-
Christoph Hellwig authored
No need to call into xfs_getattr and put a big bhv_vattr_t on the stack just to get a little information from the XFS inode. Add a helper called xfs_ioc_fsgetxattr instead that deals with retrieving the information in a clean way. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29780a Signed-off-by:
-
Vlad Apostolov authored
In the following scenario xfs_bulkstat() returns incorrect stale inode state: 1. File_A is created and its inode synced to disk. 2. File_A is unlinked and doesn't exist anymore. 3. Filesystem sync is invoked. 4. File_B is created. File_B happens to reclaim File_A's inode. 5. xfs_bulkstat() is called and detects File_B but reports the incorrect File_A inode state. Explanation for the incorrect inode state is that inodes are not immediately synced on file create for performance reasons. This leaves the on-disk inode buffer uninitialized (or with old state from a previous generation inode) and this is what xfs_bulkstat() would report. The patch marks the on-disk inode buffer "dirty" on unlink. When the inode is reclaimed (by a new file create), xfs_bulkstat() would filter this inode by the "dirty" mark. Once the inode is flushed to disk, the on-disk buffer "dirty" mark is automatically removed and a following xfs_bulkstat() would return the correct inode state. Marking the on-disk inode buffer "dirty" on unlink is achieved by setting the on-disk di_nlink field to 0. Note that the in-core di_nlink has already been set to 0 and a corresponding transaction logged by xfs_droplink(). This is an exception from the rule that any on-disk inode buffer changes has to be followed by a disk write (inode flush). Synchronizing the in-core to on-disk di_nlink values in advance (before the actual inode flush to disk) should be fine in this case because the inode is already unlinked and it would never change its di_nlink again for this inode generation. SGI-PV: 970842 SGI-Modid: xfs-linux-melb:xfs-kern:29757a Signed-off-by:
Vlad Apostolov <vapo@sgi.com> Signed-off-by:
Alex Elder <aelder@sgi.com> Signed-off-by:
Mark Goodwin <markgw@sgi.com> Signed-off-by:
-
Christoph Hellwig authored
SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29705a Signed-off-by:
-
Vlad Apostolov authored
Fix for a regression caused by a recent patch that moved the DMAPI mount option processing inside xfs_parseargs(). The DMAPI mount option used to be processed in the DMAPI module loaded before xfs_parseargs() was invoked. SGI-PV: 970451 SGI-Modid: xfs-linux-melb:xfs-kern:29683a Signed-off-by:
-
Lachlan McIlroy authored
Synchronous writes currently log inode changes before syncing pages to disk. Since the file size is updated on I/O completion we wont be writing out the updated file size and if we crash the file will have the wrong size. This change moves the logging after the syncing of the pages to ensure we log the correct file size. SGI-PV: 970334 SGI-Modid: xfs-linux-melb:xfs-kern:29649a Signed-off-by:
-
Christoph Hellwig authored
m_growlock only needs plain binary mutex semantics, so use a struct mutex instead of a semaphore for it. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29512a Signed-off-by:
-
Christoph Hellwig authored
... or in the case of XLOG_TIC_ADD_OPHDR remove a useless macro entirely. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29511a Signed-off-by:
-
Christoph Hellwig authored
Now that struct bhv_vfs doesn't have any members left we can kill it and go directly from the super_block to the xfs_mount everywhere. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29509a Signed-off-by:
-
Christoph Hellwig authored
SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29508a Signed-off-by:
-
Christoph Hellwig authored
All flags are added to xfs_mount's m_flag instead. Note that the 32bit inode flag was duplicated in both of them, but only cleared in the mount when it was not nessecary due to the filesystem beeing small enough. Two flags are still required here - one to indicate the mount option setting, and one to indicate if it applies or not. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29507a Signed-off-by:
-
Christoph Hellwig authored
vfs_altfsid was just a pointer to mp->m_fixedfsid so we can trivially replace it with the latter. vfs_fsid also was identical to m_fixedfsid through rather obfuscated ways so we can kill it as well and simply its only user. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29506a Signed-off-by:
-
Christoph Hellwig authored
Also remove the now dead behavior code. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29505a Signed-off-by:
-
Christoph Hellwig authored
All vfs ops now take struct xfs_mount pointers and the behaviour related glue is split out into methods of its own. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29504a Signed-off-by:
-
Christoph Hellwig authored
Mount options are now parsed by the main XFS module and rejected if quota support is not available, and there are some new quota operation for the quotactl syscall and calls to quote in the mount, unmount and sync callchains. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29503a Signed-off-by:
-
Christoph Hellwig authored
Mount options are now parsed by the main XFS module and rejected if dmapi support is not available, and there is a new dm operation to send the mount event. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29502a Signed-off-by:
-
Christoph Hellwig authored
In the next patch we need to look at the mount structure until just before it's freed, so we need to be able to free it as the very last thing in xfs_unmount. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29501a Signed-off-by:
-
Christoph Hellwig authored
Now that struct bhv_vnode is empty we can just kill it. Retain bhv_vnode_t as a typedef for struct inode for the time being until all the fallout is cleaned up. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29500a Signed-off-by:
-
Christoph Hellwig authored
It's entirely unused except for ignored arguments in the mrlock initialization, so remove it. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29499a Signed-off-by:
-
Christoph Hellwig authored
struct bhv_vnode is on it's way out, so move the trace buffer to the XFS inode. Note that this makes the tracing macros rather misnamed, but this kind of fallout will be fixed up incrementally later on. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29498a Signed-off-by:
-
Christoph Hellwig authored
struct bhv_vnode is on it's way out, so move the I/O count to the XFS inode. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29497a Signed-off-by:
-
Christoph Hellwig authored
SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29496a Signed-off-by:
-
Christoph Hellwig authored
All flags previously handled at the vnode level are not in the xfs_inode where we already have a flags mechanisms and free bits for flags previously in the vnode. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29495a Signed-off-by:
-
Christoph Hellwig authored
We can easily get at the vfsp through the super_block but it will soon be gone anyway. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29494a Signed-off-by:
-
Christoph Hellwig authored
SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29493a Signed-off-by:
-
- 15 Oct, 2007 12 commits
-
-
Christoph Hellwig authored
All vnode ops now take struct xfs_inode pointers and the behaviour related glue is split out into methods of it's own. This required fixing xfs_create/mkdir/symlink to not mess with the inode pointer but rather use a separate boolean for error handling. Thanks to Dave Chinner for that fix. SGI-PV: 969608 SGI-Modid: xfs-linux-melb:xfs-kern:29492a Signed-off-by:
-
Vlad Apostolov authored
XFS inodes are dynamically allocated on demand, rather than being allocated at mkfs time. Chunks of 64 inodes are allocated at once, but they are never freed. Over time, this can lead to filesystem fragmentation, clusters of inodes and the btrees which point at them can be scattered around the system. By freeing clusters as they are emptied, we will reduce fragmentation of the free space after removing files. This in turn will allow us to make better placement decisions when repopulating a filesystem. The XFSMNT_IDELETE mount option enables freeing clusters when they get empty. Unfortunately a side effect of freeing inode clusters is that the inode generation numbers of such inodes would be reset to zero when the cluster is reclaimed. This is a problem in particular for a DMAPI enabled filesystem as the the DMAPI handles need to be unique and persistent in time. An unique DMAPI handle is built with the help of the inode generation number. When the last one is prematurely reset by an inode cluster reclaim, there is a high probability of different generation inodes to end up having identical DMAPI handles. To avoid the problem with identical DMAPI handles, the XFSMNT_IDELETE mount option should be set as default, only if the filesystem is not mounted with XFSMNT_DMAPI. SGI-PV: 969192 SGI-Modid: xfs-linux-melb:xfs-kern:29486a Signed-off-by:
-
David Chinner authored
One of the perpetual scaling problems XFS has is indexing it's incore inodes. We currently uses hashes and the default hash sizes chosen can only ever be a tradeoff between memory consumption and the maximum realistic size of the cache. As a result, anyone who has millions of inodes cached on a filesystem needs to tunes the size of the cache via the ihashsize mount option to allow decent scalability with inode cache operations. A further problem is the separate inode cluster hash, whose size is based on the ihashsize but is smaller, and so under certain conditions (sparse cluster cache population) this can become a limitation long before the inode hash is causing issues. The following patchset removes the inode hash and cluster hash and replaces them with radix trees to avoid the scalability limitations of the hashes. It also reduces the size of the inodes by 3 pointers.... SGI-PV: 969561 SGI-Modid: xfs-linux-melb:xfs-kern:29481a Signed-off-by:
-
Christoph Hellwig authored
Kill uio related functions and defines now that they're unused. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29480a Signed-off-by:
-
Christoph Hellwig authored
Simplify the readlink code to get rid of the last user of uio. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29479a Signed-off-by:
-
Christoph Hellwig authored
Currently xfs has a rather complicated internal scheme to allow for different directory formats in IRIX. This patch rips all code related to this out and pushes useage of the Linux filldir callback into the lowlevel directory code. This does not make the code any less portable because filldir can be used to create dirents of all possible variations (including the IRIX ones as proved by the IRIX binary emulation code under arch/mips/). This patch get rid of an unessecary copy in the readdir path, about 400 lines of code and one of the last two users of the uio structure. This version is updated to deal with dmapi aswell which greatly simplifies the get_dirattrs code. The dmapi part has been tested using the get_dirattrs tools from the xfstest dmapi suite1 with various small and large directories. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29478a Signed-off-by:
-
Christoph Hellwig authored
Creates a new xfs_dsb_t that is __be annotated and keeps xfs_sb_t for the incore one. xfs_xlatesb is renamed to xfs_sb_to_disk and only handles the incore -> disk conversion. A new helper xfs_sb_from_disk handles the other direction and doesn't need the slightly hacky table-driven approach because we only ever read the full sb from disk. The handling of shared r/o filesystems has been buggy on little endian system and fixing this required shuffling around of some code in that area. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29477a Signed-off-by:
-
Christoph Hellwig authored
Biggest bit is duplicating the dinode structure so we have one annotated for native endianess and one for disk endianess. The other significant change is that xfs_xlate_dinode_core is split into one helper per direction to allow for proper annotations, everything else is trivial. As a sidenode splitting out the incore dinode means we can move it into xfs_inode.h in a later patch and severely improving on the include hell in xfs. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29476a Signed-off-by:
-
Michal Piotrowski authored
In sgi mod# xfs-linux-melb:xfs-kern:29319a, the variable renaming was not complete and variable 'b' was left unchanged for non-lbd 32 bit machines. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29469a Signed-off-by:
Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by:
-
Eric Sandeen authored
SGI-PV: 969372 SGI-Modid: xfs-linux-melb:xfs-kern:29444a Signed-off-by:
Eric Sandeen <sandeen@sandeen.net> Signed-off-by:
-
Christoph Hellwig authored
SGI-PV: 968690 SGI-Modid: xfs-linux-melb:xfs-kern:29340a Signed-off-by:
-
Jesper Juhl authored
If we fail to open the the log device buftarg, we can fall through to error handling code that fails to check for a NULL log device buftarg before calling xfs_free_buftarg(). This patch fixes the issue by checking mp->m_logdev_targp against NULL in xfs_unmountfs_close() and doing the proper xfs_blkdev_put(logdev); and xfs_blkdev_put(rtdev); on (!mp->m_rtdev_targp) in xfs_mount(). Discovered by the Coverity checker. SGI-PV: 968563 SGI-Modid: xfs-linux-melb:xfs-kern:29328a Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
