Add a call to cancel_work_sync() in fbcon_exit() to cancel any pending
work in the fbcon workqueue.

The current implementation of fbcon_exit() sets the fbcon workqueue
function info->queue.func to NULL, but does not assure that there is no
work pending when it does so.  On occasion, depending on system timing,
there will still be pending work in the queue when fbcon_exit() is
called.  This results in a null pointer deference when run_workqueue()
tries to call the queue's work function.

Fixes errors on shutdown similar to these:

  Console: switching to colour dummy device 80x25
  Unable to handle kernel paging request for data at address 0x00000000
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, lru_add_drain_all() has two version.
  (1) use schedule_on_each_cpu()
  (2) don't use schedule_on_each_cpu()

Gerald Schaefer reported it doesn't work well on SMP (not NUMA) S390
machine.

  offline_pages() calls lru_add_drain_all() followed by drain_all_pages().
  While drain_all_pages() works on each cpu, lru_add_drain_all() only runs
  on the current cpu for architectures w/o CONFIG_NUMA. This let us run
  into the BUG_ON(!PageBuddy(page)) in __offline_isolated_pages() during
  memory hotplug stress test on s390. The page in question was still on the
  pcp list, because of a race with lru_add_drain_all() and drain_all_pages()
  on different cpus.

Actually, Almost machine has CONFIG_UNEVICTABLE_LRU=y. Then almost machine use
(1) version lru_add_drain_all although the machine is UP.

Then this ifdef is not valueable.
simple removing is better.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert

    commit e8ced39d
    Author: Mingming Cao <cmm@us.ibm.com>
    Date:   Fri Jul 11 19:27:31 2008 -0400

        percpu_counter: new function percpu_counter_sum_and_set

As described in

	revert "percpu counter: clean up percpu_counter_sum_and_set()"

the new percpu_counter_sum_and_set() is racy against updates to the
cpu-local accumulators on other CPUs.  Revert that change.

This means that ext4 will be slow again.  But correct.
Reported-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: <stable@kernel.org>		[2.6.27.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert

    commit 1f7c14c6
    Author: Mingming Cao <cmm@us.ibm.com>
    Date:   Thu Oct 9 12:50:59 2008 -0400

        percpu counter: clean up percpu_counter_sum_and_set()

Before this patch we had the following:

percpu_counter_sum(): return the percpu_counter's value

percpu_counter_sum_and_set(): return the percpu_counter's value, copying
that value into the central value and zeroing the per-cpu counters before
returning.

After this patch, percpu_counter_sum_and_set() has gone, and
percpu_counter_sum() gets the old percpu_counter_sum_and_set()
functionality.

Problem is, as Eric points out, the old percpu_counter_sum_and_set()
functionality was racy and wrong.  It zeroes out counters on "other" cpus,
without holding any locks which will prevent races agaist updates from
those other CPUS.

This patch reverts 1f7c14c6.  This means
that percpu_counter_sum_and_set() still has the race, but
percpu_counter_sum() does not.

Note that this is not a simple revert - ext4 has since started using
percpu_counter_sum() for its dirty_blocks counter as well.

Note that this revert patch changes percpu_counter_sum() semantics.

Before the patch, a call to percpu_counter_sum() will bring the counter's
central counter mostly up-to-date, so a following percpu_counter_read()
will return a close value.

After this patch, a call to percpu_counter_sum() will leave the counter's
central accumulator unaltered, so a subsequent call to
percpu_counter_read() can now return a significantly inaccurate result.

If there is any code in the tree which was introduced after
e8ced39d was merged, and which depends
upon the new percpu_counter_sum() semantics, that code will break.
Reported-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We should first delete the counter from percpu_counters list
before freeing memory, or a percpu_counter_hotcpu_callback()
could dereference a NULL pointer.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add missing id_table to the drivers in subject.  Patch is against the
latest git.  It should go in with 2.6.28 if possible, the drivers won't
work without the id_table bits.
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Reported-by: Imre Kaloz <kaloz@openwrt.org>
Tested-by: Imre Kaloz <kaloz@openwrt.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Running kmemtraced, which uses splice() on relayfs, causes a hard lock on
x86-64 SMP.  As described by Tom Zanussi:

  It looks like you hit the same problem as described here:

  commit 8191ecd1

      splice: fix infinite loop in generic_file_splice_read()

  relay uses the same loop but it never got noticed or fixed.

Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Tested-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mconsole_init() passed 256 bytes as length in os_create_unix_socket, while
the sizeof UNIX_PATH_MAX is 108. This patch fixes that problem and avoids
a big overrun bug reported on UML bootup.

sockaddr_un.sun_path is UNIX_PATH_MAX long which causes the problem.
Reported-by: Vikas K Managutte <vikki.km@gmail.com>
Reported-by: Sarvesh Kumar Lal Das <skldas@gmail.com>
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Reviewed-by: WANG Cong <wangcong@zeuux.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: <stable@kernel.org>		[please check with Jeff]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On second thoughts, this is just going to disturb people while telling us
things which we already knew.

Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] Fix alignment fault handling for ARMv6 and later CPUs
  [ARM] 5340/1: fix stack placement after noexecstack changes
  [ARM] 5339/1: fix __fls() on ARM
  [ARM] Orion: fix bug in pcie configuration cycle function field mask
  [ARM] omap: fix a pile of issues

* git://git.infradead.org/mtd-2.6:
  [MTD] [NAND] fix OOPS accessing flash operations over STM flash on PXA
  [MTD] [NAND] drivers/mtd/nand/pasemi_nand.c: Add missing pci_dev_put
  [MTD] [NAND] fsl_upm: fix build problem with 2.6.28-rc2
  [MTD] physmap: fix memory leak on physmap_flash_remove by using devres
  [MTD] m25p80: chip erase != block erase != sector erase
  [MTD] m25p80: fix detection of m25p16 flashes
  [MTD] m25p80: fix detection of SPI parts
  [MTD] [NAND] OMAP: OneNAND: header file relocation (part 2)
  [MTD] [NAND] OMAP: OneNAND: header file relocation

* 'audit.b59' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] fix broken timestamps in AVC generated by kernel threads
  [patch 1/1] audit: remove excess kernel-doc
  [PATCH] asm/generic: fix bug - kernel fails to build when enable some common audit code on Blackfin
  [PATCH] return records for fork() both to child and parent
  [PATCH] Audit: make audit=0 actually turn off audit

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ata: Fix experimental tags
  pata_ninja32: update ID table
  pata_sis: Remove bogus cable match
  ATA: piix, fix pointer deref on suspend
  pata_hpt366: fix clock detection

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: Disable the GM965 MSI errata workaround.
  drm/i915: Don't return error in evict_everything when we get to the end.
  drm/radeon: don't actually enable the IRQ regs until irq is enabled

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  powerpc/virtex5: Fix Virtex5 machine check handling

This new color expansion acceleration for radeonfb appears to trigger
problems with X on VT switch and suspend/resume on some machines. It
might be a problem in the VT layer or in X, but I haven't quite found
it yet, so in the meantime, this disables the acceleration by default,
reverting to 2.6.27 state. It can be enabled using the "accel_cexp"
module parameter or fbdev argument.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Timestamp in audit_context is valid only if ->in_syscall is set.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Delete excess kernel-doc notation in kernel/auditsc.c:

Warning(linux-2.6.27-git10//kernel/auditsc.c:1481): Excess function parameter or struct member 'tsk' description in 'audit_syscall_entry'
Warning(linux-2.6.27-git10//kernel/auditsc.c:1564): Excess function parameter or struct member 'tsk' description in 'audit_syscall_exit'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

If you enable some common audit code, the kernel fails to build.

In file included from lib/audit.c:17:
include/asm-generic/audit_write.h:3: error: '__NR_swapon' undeclared here (not in a function)
make[1]: *** [lib/audit.o] Error 1
make: *** [lib] Error 2

So do not use __NR_swapon if it isnt defined for a port.
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Currently audit=0 on the kernel command line does absolutely nothing.
Audit always loads and always uses its resources such as creating the
kernel netlink socket.  This patch causes audit=0 to actually disable
audit.  Audit will use no resources and starting the userspace auditd
daemon will not cause the kernel audit system to activate.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Various tags are now way out of date
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Some systems report SIS 5513 as both vendor/id and subvendor/id
string. In that case we can't distinguish the system by the id
svid/sdid and in fact the entry here breaks some boxes. At some
point we need to find another way to detect the Targa Visionary 1000,
until then this trades a hang for some users with lower performance
for others.

Closes: #12092
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Hi,

I've found this issue in the mmotm 2008-12-02-17-08.

--

Commit
ata_piix: add borked Tecra M4 to broken suspend list
introduced DMI variables checking, but they can be null, so that
we possibly dereference null.

Check if they are null and avoid checks in that case.

Solves:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
IP: [<ffffffff8043da97>] piix_pci_device_suspend+0x117/0x230
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: Alexandru Romanescu <a_romanescu@yahoo.co.uk>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

pata_hpt366 had its clock detection wrong and detected 25Mhz as 40Mhz
and vice-versa.  Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Since applying the fix suggested by the errata (disabling MSI), we've had
issues with interrupts being stuck on despite IIR being 0 on GM965 hardware.
Most reporters of the issue have confirmed that turning MSI back on fixes
things, and given the difficulties experienced in getting reliable MSI working
on Linux, it's believable that the errata was about software issues and not
actual hardware issues.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Returning -ENOMEM errored all the way out of execbuf, so the rendering never
occurred.
Signed-off-by: Dave Airlie <airlied@redhat.com>

vblank can try and enable the IRQ registers before we've set the interrupt
handler up.
Signed-off-by: Dave Airlie <airlied@redhat.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  tproxy: fixe a possible read from an invalid location in the socket match
  zd1211rw: use unaligned safe memcmp() in-place of compare_ether_addr()
  mac80211: use unaligned safe memcmp() in-place of compare_ether_addr()
  ipw2200: fix netif_*_queue() removal regression
  iwlwifi: clean key table in iwl_clear_stations_table function
  tcp: tcp_vegas ssthresh bug fix
  can: omit received RTR frames for single ID filter lists
  ATM: CVE-2008-5079: duplicate listen() on socket corrupts the vcc table
  netx-eth: initialize per device spinlock
  tcp: make urg+gso work for real this time
  enc28j60: Fix sporadic packet loss (corrected again)
  hysdn: fix writing outside the field on 64 bits
  b1isa: fix b1isa_exit() to really remove registered capi controllers
  can: Fix CAN_(EFF|RTR)_FLAG handling in can_filter
  Phonet: do not dump addresses from other namespaces
  netlabel: Fix a potential NULL pointer dereference
  bnx2: Add workaround to handle missed MSI.
  xfrm: Fix kernel panic when flush and dump SPD entries

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix default_spin_lock_flags() prototype
  AMD IOMMU: __unmap_single: check for bad_dma_address instead of 0
  AMD IOMMU: fix WARN_ON in dma_ops unmap path
  AMD IOMMU: fix typo in comment
  AMD IOMMU: fix loop counter in free_pagetable function
  AMD IOMMU: fix iommu_map_page function

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide: build-fix for CONFIG_BLK_DEV_IDEDMA_PMAC=n
  Revert "ide: respect current DMA setting during resume"

While 44003728 "[PATCH] switch all filesystems over to
d_obtain_alias" removed some cases where fh_to_dentry() and
fh_to_parent() could return NULL, there are still a few NULL returns
left in individual filesystems.  Thus it was a mistake for that commit
to remove the handling of NULL returns in the callers.

Revert those parts of 44003728 which removed the NULL handling.

(We could, alternatively, modify all implementations to return -ESTALE
instead of NULL, but that proves to require fixing a number of
filesystems, and in some cases it's arguably more natural to return
NULL.)

Thanks to David for original patch and Linus, Christoph, and Hugh for
review.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: David Howells <dhowells@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

IDE pmac host driver build fails with CONFIG_BLK_DEV_IDEDMA_PMAC=n
as reported by Kamalesh:

> drivers/ide/pmac.c: In function 'pmac_ide_set_pio_mode':
> drivers/ide/pmac.c:527: error: implicit declaration of function 'kauai_lookup_timing'
> drivers/ide/pmac.c:527: error: 'shasta_pio_timings' undeclared (first use in this function)
> drivers/ide/pmac.c:527: error: (Each undeclared identifier is reported only once
> drivers/ide/pmac.c:527: error: for each function it appears in.)
> drivers/ide/pmac.c:534: error: 'kauai_pio_timings' undeclared (first use in this function)
> drivers/ide/pmac.c: In function 'pmac_ide_do_resume':
> drivers/ide/pmac.c:914: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> drivers/ide/pmac.c: At top level:
> drivers/ide/pmac.c:1007: error: 'pmac_ide_init_dma' undeclared here (not in a function)
> drivers/ide/pmac.c: In function 'pmac_ide_setup_device':
> drivers/ide/pmac.c:1107: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> drivers/ide/pmac.c: In function 'pmac_ide_macio_attach':
> drivers/ide/pmac.c:1209: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> drivers/ide/pmac.c:1210: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> make[2]: *** [drivers/ide/pmac.o] Error 1

Fix it by removing the superfluous config option.
Reported-and-tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This reverts commit e9eb8388 since
it could break resume (thanks to Paul Collins for the report).

I'll look into sorting this out properly for 2.6.29
but for 2.6.28 it is the best to just revert my patch.
Reported-by: Paul Collins <paul@burly.ondioline.org>
Cc: rjw@sisk.pl
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

these warnings:

  arch/x86/kernel/paravirt-spinlocks.c: In function ‘default_spin_lock_flags’:
  arch/x86/kernel/paravirt-spinlocks.c:12: warning: passing argument 1 of ‘__raw_spin_lock’ from incompatible pointer type
  arch/x86/kernel/paravirt-spinlocks.c: At top level:
  arch/x86/kernel/paravirt-spinlocks.c:11: warning: ‘default_spin_lock_flags’ defined but not used

showed that the prototype of default_spin_lock_flags() was confused about
what type spinlocks have.

the proper type on UP is raw_spinlock_t.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: minor fix
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Impact: minor fix
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Impact: cleanup
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>