- 17 Sep, 2009 40 commits
-
-
Yi Li authored
Signed-off-by:
Yi Li <yi.li@analog.com> Signed-off-by:
Mike Frysinger <vapier@gentoo.org>
-
Barry Song authored
The board has some parallel flash hooked up to the async banks, so add appropriate physmap resources for it. Signed-off-by:
Barry Song <barry.song@analog.com> Signed-off-by:
-
Roel Kluin authored
Check whether index is within bounds before testing the element. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Stefan Pledl authored
I think we have to use the physical dimensions [mm] of the display for .width and .heigth in struct bfin_bf54xfb_mach_info bf54x_lq043_data which are copied to fbinfo->var.height/.width in bf54x-lq043fb.c. linux/fb.h describes this values as 'height/weight of picture in mm' Otherwise QT calcs the wrong dpi value and the displayed fonts are very small. Signed-off-by:
Stefan Pledl <stefan.pledl@mesutronic.de> Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Barry Song authored
The dm9000 driver expects two IORESOURCE_MEM to get at the device, so make sure we declare things properly. Signed-off-by:
-
Mike Frysinger authored
Signed-off-by: -
Michael Hennerich authored
Latest smc91x driver allows you to specify settings in board resources rather than needing CONFIG_BLACKFIN in the drivers/net/smc91x.h header. Signed-off-by:
-
Barry Song authored
The interrupt probe workaround doesn't work without hacks to common code, and the add-on card only needs a simple resistor to fix the problem, so drop the board-specific hack. Signed-off-by:
-
Graf Yang authored
Since the hardware only provides reporting for the last exception handled, and the values are valid only when executing the exception handler, we need to save the context for reporting at a later point. While we do this for one exception, it doesn't work properly when handling a second one as the original exception is clobbered by the double fault. So when double fault debugging is enabled, create a dedicated shadow of these values and save/restore out of there. Now the crash report properly displays the first exception as well as the second one. Signed-off-by:
Graf Yang <graf.yang@analog.com> Signed-off-by:
-
Cliff Cai authored
One too many zeros means we run way faster than the codec can handle. Signed-off-by:
Cliff Cai <cliff.cai@analog.com> Signed-off-by:
-
Graf Yang authored
The protect_page() function was incorrectly setting up the hardware tables based on possible access capabilities rather than the actual requested values. This means we would grant more access to mmap-ed pages than we should have. Once we fix this, we need to tweak the signal generated by such accesses to aline ourselves with other ports. This allows the LTP mmap0{5,6,7} cases to run properly. Signed-off-by: -
Jean Delvare authored
I2C_BOARD_INFO() already sets .type, no need to set it again. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Barry Song authored
Push the device table to the board resources as data interpretation can be changed on a per-board basis. Signed-off-by:
-
Sonic Zhang authored
The end of the stack may not be valid (and that could be OK), so do not attempt to parse it. If we do, we might use a bad pointer in kernel space which makes things panic(). Signed-off-by:
Sonic Zhang <sonic.zhang@analog.com> Signed-off-by:
-
Yi Li authored
Signed-off-by:
-
Barry Song authored
Add the bf538 version of bfin_clear_PPI_STATUS() to match all other ports. Signed-off-by:
-
Stefan Pledl authored
The initial BF54x port included some defines to keep code simple across different processors, but it just ended up causing the UART0 DMA IRQs to be set to the UART1 channels. Signed-off-by:
-
Robin Getz authored
Allow hardware errors to be caught during early portions of booting, and leave something in the shadow console that people can use to debug their system with (to be printed out by the bootloader on next reset). This enables the hardare error interrupts in head.S, allowing us to find hardware errors when they happen (well, as much as you can with a hardware error) and prints out the trace if it is enabled. This will catch errors (like booting the wrong image on a 533) which previously resulted in a infinite loop/hang, as well as random hardware errors before before setup_arch(). To disable this debug only feature - turn off EARLY_PRINTK. Signed-off-by:
Robin Getz <robin.getz@analog.com> Signed-off-by:
-
Robin Getz authored
Add a memory based shadow console to keep a copy of the printk buffer in a location which can be found externally. This allows bootloaders to locate and utilize the log buffer in case of silent (early/resume/etc...) crashes. Signed-off-by:
-
Mike Frysinger authored
The FDPIC arches support a standard set of ptrace requests so rather than define our own custom API, hook up those requests for common code to leverage. Signed-off-by: -
Mike Frysinger authored
Rather than defining the locks and initializing them all the time, only do so when we actually need them (i.e. the SRAM regions exist). This avoids dead data and code bloat during runtime. Signed-off-by: -
Sonic Zhang authored
Signed-off-by:
-
Michael Hennerich authored
The "TWI_KEYPAD" driver was renamed to "INPUT_PCF8574", so update the defines in the board resources accordingly. Signed-off-by:
-
Robin Getz authored
Remove code duplication, and only print out memory warnings when they are an actual problem. Signed-off-by:
-
Mike Frysinger authored
The current module relocation code has spotty handling wrt different memory regions (like L1 instruction). Rather than try to fix each little spot, use the new common memory functions to greatly simplify everything and make sure it is always correct. Signed-off-by: -
Mike Frysinger authored
The current module section handling code has a lot of verbose statements copied and pasted throughout which makes it pretty hard to digest at a glance. By unifying all of these up front, it is a lot easier to quickly get an idea of what is actually going on. Signed-off-by: -
Mike Frysinger authored
Signed-off-by: -
Mike Frysinger authored
Convert all printk() statements to use the common pr_xxx() funcs and use the new pr_fmt() function to standardize all of the output. Signed-off-by: -
Robin Getz authored
All kernel modules are required to be built with -mlong-calls and thus should not generate any of these relocations. If they do, it means the module has not been compiled properly, so rather than trying to handle them (and running into random run time errors) just error out on module load to force the module to be compiled correctly. Signed-off-by:
-
Mike Frysinger authored
Now that we have a Blackfin memory function to figure out how to properly access the different regions, drop the custom memory range checks in our ptrace code and use that. It makes the code nicer and fixes bugs where the ptrace logic wasn't handling all the different regions. Signed-off-by: -
Mike Frysinger authored
Unify the address display to shrink the code, and add missing decoding of a few special Blackfin-specific regions (L1 ROM and MMRs). Signed-off-by: -
Philippe Gerum authored
Signed-off-by:
Philippe Gerum <rpm@xenomai.org> Signed-off-by:
-
Philippe Gerum authored
Cleanup is performed in two ways: - remove extraneous updates of IPEND[4] w/ CONFIG_IPIPE, and document remaining use. - substitute pop-reg-from-stack instructions with plain SP fixups in all save-RETI-then-discard patterns. Signed-off-by:
-
Philippe Gerum authored
Signed-off-by:
-
Philippe Gerum authored
Signed-off-by:
-
Philippe Gerum authored
Signed-off-by:
-
Philippe Gerum authored
The purpose of the EVT14 handler may depend on whether CONFIG_IPIPE is enabled, albeit its implementation can be the same in both cases. When the interrupt pipeline is enabled, EVT14 can be used to raise the core priority level for the running code; when CONFIG_IPIPE is off, EVT14 can be used to lower this level before running softirq handlers. Rename evt14_softirq to evt_evt14 to pick an identifier that fits both, which allows to reuse the same vector setup code as well. Signed-off-by:
-
Philippe Gerum authored
ret_from_fork is always entered with hw interrupts off, which prevents real-time domains to preempt the Linux kernel during part of the initial context switch to the new task, which could in turn raise the worst-case latency figures. To avoid this, stall the root domain stage in the interrupt pipeline to keep the scheduling tail code free from Linux-handled IRQs, then enable hardware interrupts again. Signed-off-by:
-
Philippe Gerum authored
Signed-off-by:
-
Philippe Gerum authored
__ipipe_{stall, unstall}_root_raw() identifiers may leave the reader under the impression that only the virtual state is affected by these operations, which is wrong. Pick names following the convention used throughout the interrupt pipeline code. Signed-off-by:
-
