Skip to content

L
linux-davinci
Switch branch/tag
  1. 01 Feb, 2010 1 commit
    • Gui Jianfeng's avatar
      blk-cgroup: Fix potential deadlock in blk-cgroup · bcf4dd43
      Gui Jianfeng authored 
      I triggered a lockdep warning as following.

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.33-rc2 #1
-------------------------------------------------------
test_io_control/7357 is trying to acquire lock:
 (blkio_list_lock){+.+...}, at: [<c053a990>] blkiocg_weight_write+0x82/0x9e

but task is already holding lock:
 (&(&blkcg->lock)->rlock){......}, at: [<c053a949>] blkiocg_weight_write+0x3b/0x9e

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (&(&blkcg->lock)->rlock){......}:
       [<c04583b7>] validate_chain+0x8bc/0xb9c
       [<c0458dba>] __lock_acquire+0x723/0x789
       [<c0458eb0>] lock_acquire+0x90/0xa7
       [<c0692b0a>] _raw_spin_lock_irqsave+0x27/0x5a
       [<c053a4e1>] blkiocg_add_blkio_group+0x1a/0x6d
       [<c053cac7>] cfq_get_queue+0x225/0x3de
       [<c053eec2>] cfq_set_request+0x217/0x42d
       [<c052c8a6>] elv_set_request+0x17/0x26
       [<c0532a0f>] get_request+0x203/0x2c5
       [<c0532ae9>] get_request_wait+0x18/0x10e
       [<c0533470>] __make_request+0x2ba/0x375
       [<c0531985>] generic_make_request+0x28d/0x30f
       [<c0532da7>] submit_bio+0x8a/0x8f
       [<c04d827a>] submit_bh+0xf0/0x10f
       [<c04d91d2>] ll_rw_block+0xc0/0xf9
       [<f86e9705>] ext3_find_entry+0x319/0x544 [ext3]
       [<f86eae58>] ext3_lookup+0x2c/0xb9 [ext3]
       [<c04c3e1b>] do_lookup+0xd3/0x172
       [<c04c56c8>] link_path_walk+0x5fb/0x95c
       [<c04c5a65>] path_walk+0x3c/0x81
       [<c04c5b63>] do_path_lookup+0x21/0x8a
       [<c04c66cc>] do_filp_open+0xf0/0x978
       [<c04c0c7e>] open_exec+0x1b/0xb7
       [<c04c1436>] do_execve+0xbb/0x266
       [<c04081a9>] sys_execve+0x24/0x4a
       [<c04028a2>] ptregs_execve+0x12/0x18

-> #1 (&(&q->__queue_lock)->rlock){..-.-.}:
       [<c04583b7>] validate_chain+0x8bc/0xb9c
       [<c0458dba>] __lock_acquire+0x723/0x789
       [<c0458eb0>] lock_acquire+0x90/0xa7
       [<c0692b0a>] _raw_spin_lock_irqsave+0x27/0x5a
       [<c053dd2a>] cfq_unlink_blkio_group+0x17/0x41
       [<c053a6eb>] blkiocg_destroy+0x72/0xc7
       [<c0467df0>] cgroup_diput+0x4a/0xb2
       [<c04ca473>] dentry_iput+0x93/0xb7
       [<c04ca4b3>] d_kill+0x1c/0x36
       [<c04cb5c5>] dput+0xf5/0xfe
       [<c04c6084>] do_rmdir+0x95/0xbe
       [<c04c60ec>] sys_rmdir+0x10/0x12
       [<c04027cc>] sysenter_do_call+0x12/0x32

-> #0 (blkio_list_lock){+.+...}:
       [<c0458117>] validate_chain+0x61c/0xb9c
       [<c0458dba>] __lock_acquire+0x723/0x789
       [<c0458eb0>] lock_acquire+0x90/0xa7
       [<c06929fd>] _raw_spin_lock+0x1e/0x4e
       [<c053a990>] blkiocg_weight_write+0x82/0x9e
       [<c0467f1e>] cgroup_file_write+0xc6/0x1c0
       [<c04bd2f3>] vfs_write+0x8c/0x116
       [<c04bd7c6>] sys_write+0x3b/0x60
       [<c04027cc>] sysenter_do_call+0x12/0x32

other info that might help us debug this:

1 lock held by test_io_control/7357:
 #0:  (&(&blkcg->lock)->rlock){......}, at: [<c053a949>] blkiocg_weight_write+0x3b/0x9e
stack backtrace:
Pid: 7357, comm: test_io_control Not tainted 2.6.33-rc2 #1
Call Trace:
 [<c045754f>] print_circular_bug+0x91/0x9d
 [<c0458117>] validate_chain+0x61c/0xb9c
 [<c0458dba>] __lock_acquire+0x723/0x789
 [<c0458eb0>] lock_acquire+0x90/0xa7
 [<c053a990>] ? blkiocg_weight_write+0x82/0x9e
 [<c06929fd>] _raw_spin_lock+0x1e/0x4e
 [<c053a990>] ? blkiocg_weight_write+0x82/0x9e
 [<c053a990>] blkiocg_weight_write+0x82/0x9e
 [<c0467f1e>] cgroup_file_write+0xc6/0x1c0
 [<c0454df5>] ? trace_hardirqs_off+0xb/0xd
 [<c044d93a>] ? cpu_clock+0x2e/0x44
 [<c050e6ec>] ? security_file_permission+0xf/0x11
 [<c04bcdda>] ? rw_verify_area+0x8a/0xad
 [<c0467e58>] ? cgroup_file_write+0x0/0x1c0
 [<c04bd2f3>] vfs_write+0x8c/0x116
 [<c04bd7c6>] sys_write+0x3b/0x60
 [<c04027cc>] sysenter_do_call+0x12/0x32

To prevent deadlock, we should take locks as following sequence:

blkio_list_lock -> queue_lock ->  blkcg_lock.

The following patch should fix this bug.
Signed-off-by: default avatarGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: default avatarJens Axboe <jens.axboe@oracle.com>
      bcf4dd43
  3. 30 Jan, 2010 1 commit
  5. 28 Jan, 2010 1 commit
  7. 25 Jan, 2010 2 commits
  9. 24 Jan, 2010 5 commits
  11. 22 Jan, 2010 3 commits
  13. 21 Jan, 2010 21 commits
  15. 20 Jan, 2010 6 commits
    • Lothar Wassmann's avatar
      USB: isp1362: fix build failure on ARM systems via irq_flags cleanup · 0a2fea2e
      Lothar Wassmann authored 
      There was some left over #ifdef ARM logic that is outdated but no one
really noticed.  So instead of relying on this tricky logic, properly
load and utilize the platform irq_flags resources.
Reported-by: default avatarBen Hutchings <ben@decadent.org.uk>
Signed-off-by: default avatarLothar Wassmann <LW@KARO-electronics.de>
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      0a2fea2e
    • Lothar Wassmann's avatar
      USB: isp1362: better 64bit printf warning fixes · 96b85179
      Lothar Wassmann authored 
      Some hosts that treat the return value of sizeof differently from unsigned
long might still hit warnings.  So use %zu for sizeof() values.  This is a
better version of the previous commit b0a9cf29.
Signed-off-by: default avatarLothar Wassmann <LW@KARO-electronics.de>
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      96b85179
    • Ryan May's avatar
      USB: fix usbstorage for 2770:915d delivers no FAT · 10d2cdb6
      Ryan May authored 
      Resolves kernel.org bug 14914.

Remove entry for 2770:915d (usb digital camera with mass storage
support) from unusual_devs.h. The fix triggered by the entry causes
the file system on the camera to be completely inaccessible (no
partition table, the device is not mountable).

The patch works, but let me clarify a few things about it.  All the
patch does is remove the entry for this device from the
drivers/usb/storage/unusual_devs.h, which is supposed to help with a
problem with the device's reported size (I think).  I'm pretty sure it
was originally added for a reason, so I'm not sure removing it won't
cause other problems to reappear.  Also, I should note that this
unusual_devs.h entry was present (and activating workarounds) in
2.6.29, but in that version everything works fine.  Starting with
2.6.30, things no longer work.
Signed-off-by: default avatarRyan May <rmay31@gmail.com>
Cc: Rohan Hart <rohan.hart17@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      10d2cdb6
    • Colin Tuckley's avatar
      USB: Fix level of isp1760 Reloading ptd error message · c0d74142
      Colin Tuckley authored 
      This error message is not actually an error, it's an information
message. It is triggered when a transfer which ended in a NAQ is
retried successfully by the hardware.
Signed-off-by: default avatarColin Tuckley <colin.tuckley@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      c0d74142
    • Alexander Beregalov's avatar
      USB: FHCI: avoid NULL pointer dereference · ae35fe9e
      Alexander Beregalov authored 
      Assign fhci only if usb is not NULL.
Signed-off-by: default avatarAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      ae35fe9e
    • Sarah Sharp's avatar
      USB: Fix duplicate sysfs problem after device reset. · 04a723ea
      Sarah Sharp authored 
      Borislav Petkov reports issues with duplicate sysfs endpoint files after a
resume from a hibernate.  It turns out that the code to support alternate
settings under xHCI has issues when a device with a non-default alternate
setting is reset during the hibernate:

[  427.681810] Restarting tasks ...
[  427.681995] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000
[  427.682019] usb usb3: usb resume
[  427.682030] ohci_hcd 0000:00:12.0: wakeup root hub
[  427.682191] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[  427.682205] usb 1-2: usb wakeup-resume
[  427.682226] usb 1-2: finish reset-resume
[  427.682886] done.
[  427.734658] ehci_hcd 0000:00:12.2: port 2 high speed
[  427.734663] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
[  427.746682] hub 3-0:1.0: hub_reset_resume
[  427.746693] hub 3-0:1.0: trying to enable port power on non-switchable hub
[  427.786715] usb 1-2: reset high speed USB device using ehci_hcd and address 2
[  427.839653] ehci_hcd 0000:00:12.2: port 2 high speed
[  427.839666] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT
[  427.847717] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS
[  427.915497] hub 1-2:1.0: remove_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 1
[  427.915774] hub 1-2:1.0: remove_intf_ep_devs: bNumEndpoints: 1
[  427.915934] hub 1-2:1.0: if: ffff88022f9e8800: endpoint devs removed.
[  427.916158] hub 1-2:1.0: create_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 0, ->unregistering: 0
[  427.916434] hub 1-2:1.0: create_intf_ep_devs: bNumEndpoints: 1
[  427.916609]  ep_81: create, parent hub
[  427.916632] ------------[ cut here ]------------
[  427.916644] WARNING: at fs/sysfs/dir.c:477 sysfs_add_one+0x82/0x96()
[  427.916649] Hardware name: System Product Name
[  427.916653] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/ep_81'
[  427.916658] Modules linked in: binfmt_misc kvm_amd kvm powernow_k8 cpufreq_ondemand cpufreq_powersave cpufreq_userspace freq_table cpufreq_conservative ipv6 vfat fat
+8250_pnp 8250 pcspkr ohci_hcd serial_core k10temp edac_core
[  427.916694] Pid: 278, comm: khubd Not tainted 2.6.33-rc2-00187-g08d869aa-dirty #13
[  427.916699] Call Trace:

The problem is caused by a mismatch between the USB core's view of the
device state and the USB device and xHCI host's view of the device state.

After the device reset and re-configuration, the device and the xHCI host
think they are using alternate setting 0 of all interfaces.  However, the
USB core keeps track of the old state, which may include non-zero
alternate settings.  It uses intf->cur_altsetting to keep the endpoint
sysfs files for the old state across the reset.

The bandwidth allocation functions need to know what the xHCI host thinks
the current alternate settings are, so original patch set
intf->cur_altsetting to the alternate setting 0.  This caused duplicate
endpoint files to be created.

The solution is to not set intf->cur_altsetting before calling
usb_set_interface() in usb_reset_and_verify_device().  Instead, we add a
new flag to struct usb_interface to tell usb_hcd_alloc_bandwidth() to use
alternate setting 0 as the currently installed alternate setting.
Signed-off-by: default avatarSarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: default avatarBorislav Petkov <petkovbb@googlemail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      04a723ea