- 31 Oct, 2008 3 commits
-
-
Rafael J. Wysocki authored
Adapt the e100 driver to the reworked PCI PM * Use the observation that it is sufficient to call pci_enable_wake() once, unless it fails Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Tested-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Rafael J. Wysocki authored
Adapt the skge driver to the reworked PCI PM * Use device_set_wakeup_enable() and friends as needed * Remove an open-coded reference to the standard PCI PM registers * Use pci_prepare_to_sleep() and pci_back_from_sleep() in the ->suspend() and ->resume() callbacks * Use the observation that it is sufficient to call pci_enable_wake() once, unless it fails Tested on Asus L5D (Yukon-Lite rev 7). Signed-off-by:
-
- 30 Oct, 2008 2 commits
-
-
Eric Dumazet authored
Spotted by Alexander Beregalov Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Harvey Harrison authored
As a bonus, removes some unnecessary byteswapping. Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
- 29 Oct, 2008 20 commits
-
-
Stephen Hemminger authored
If macvlan's are used, it is useful to propgate speed and other settings from underlying device up for application usage. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Acked-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
gcc warns when using the # modifier with the %p format specifier, so we can't use this to omit the colons when needed, introduces %pi6 instead. Signed-off-by:
-
Harvey Harrison authored
For use in printing IPv4, or IPv6 addresses in the usual way: %i4 and %I4 are currently equivalent and print the address in dot-separated decimal x.x.x.x %I6 prints 16-bit network order hex with colon separators: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx %i6 omits the colons. Signed-off-by:
-
Eric Dumazet authored
Corey Minyard found a race added in commit 271b72c7 (udp: RCU handling for Unicast packets.) "If the socket is moved from one list to another list in-between the time the hash is calculated and the next field is accessed, and the socket has moved to the end of the new list, the traversal will not complete properly on the list it should have, since the socket will be on the end of the new list and there's not a way to tell it's on a new list and restart the list traversal. I think that this can be solved by pre-fetching the "next" field (with proper barriers) before checking the hash." This patch corrects this problem, introducing a new sk_for_each_rcu_safenext() macro. Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
This patch mimics commit 57413ebc (tcp: calculate tcp_mem based on low memory instead of all memory) The udp_mem array which contains limits on the total amount of memory used by UDP sockets is calculated based on nr_all_pages. On a 32 bits x86 system, we should base this on the number of lowmem pages. Signed-off-by:
-
Eric Dumazet authored
Goals are : 1) Optimizing handling of incoming Unicast UDP frames, so that no memory writes should happen in the fast path. Note: Multicasts and broadcasts still will need to take a lock, because doing a full lockless lookup in this case is difficult. 2) No expensive operations in the socket bind/unhash phases : - No expensive synchronize_rcu() calls. - No added rcu_head in socket structure, increasing memory needs, but more important, forcing us to use call_rcu() calls, that have the bad property of making sockets structure cold. (rcu grace period between socket freeing and its potential reuse make this socket being cold in CPU cache). David did a previous patch using call_rcu() and noticed a 20% impact on TCP connection rates. Quoting Cristopher Lameter : "Right. That results in cacheline cooldown. You'd want to recycle the object as they are cache hot on a per cpu basis. That is screwed up by the delayed regular rcu processing. We have seen multiple regressions due to cacheline cooldown. The only choice in cacheline hot sensitive areas is to deal with the complexity that comes with SLAB_DESTROY_BY_RCU or give up on RCU." - Because udp sockets are allocated from dedicated kmem_cache, use of SLAB_DESTROY_BY_RCU can help here. Theory of operation : --------------------- As the lookup is lockfree (using rcu_read_lock()/rcu_read_unlock()), special attention must be taken by readers and writers. Use of SLAB_DESTROY_BY_RCU is tricky too, because a socket can be freed, reused, inserted in a different chain or in worst case in the same chain while readers could do lookups in the same time. In order to avoid loops, a reader must check each socket found in a chain really belongs to the chain the reader was traversing. If it finds a mismatch, lookup must start again at the begining. This *restart* loop is the reason we had to use rdlock for the multicast case, because we dont want to send same message several times to the same socket. We use RCU only for fast path. Thus, /proc/net/udp still takes spinlocks. Signed-off-by: -
Eric Dumazet authored
UDP sockets are hashed in a 128 slots hash table. This hash table is protected by *one* rwlock. This rwlock is readlocked each time an incoming UDP message is handled. This rwlock is writelocked each time a socket must be inserted in hash table (bind time), or deleted from this table (close time) This is not scalable on SMP machines : 1) Even in read mode, lock() and unlock() are atomic operations and must dirty a contended cache line, shared by all cpus. 2) A writer might be starved if many readers are 'in flight'. This can happen on a machine with some NIC receiving many UDP messages. User process can be delayed a long time at socket creation/dismantle time. This patch prepares RCU migration, by introducing 'struct udp_table and struct udp_hslot', and using one spinlock per chain, to reduce contention on central rwlock. Introducing one spinlock per chain reduces latencies, for port randomization on heavily loaded UDP servers. This also speedup bindings to specific ports. udp_lib_unhash() was uninlined, becoming to big. Some cleanups were done to ease review of following patch (RCUification of UDP Unicast lookups) Signed-off-by:
-
Harvey Harrison authored
Open code NIP6_FMT in the one call inside sscanf and one user of NIP6() that could use %p6 in the netfilter code. Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Replace all uses of IPOIB_GID_FMT, IPOIB_GID_RAW_ARG() and IPOIB_GID_ARG() Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Stephen Hemminger authored
This enables more ethtool information. The speed and settings of the underlying device are propagated up. This makes services like SNMP that use ethtool to get speed setting, work when managing a vlan, without adding silly heurtistics into SNMP daemon. For the driver info, just use existing driver strings. Signed-off-by:
-
Daniel Lezcano authored
The veth network device is stored in a list in the netdev private. AFAICS, this list is never used so I removed this list from the code. Signed-off-by:
Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by:
-
Daniel Lezcano authored
The veth private structure contains a netdev pointer refering to its peer. This field is never used and it is pointless because if we can access, the veth_priv, that means we already have the netdev which is stored in veth_priv->dev. Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
- 28 Oct, 2008 14 commits
-
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
The iscsi_ibft.c changes are almost certainly a bugfix as the pointer 'ip' is a u8 *, so they never print the last 8 bytes of the IPv6 address, and the eight bytes they do print have a zero byte with them in each 16-bit word. Other than that, this should cause no difference in functionality. Signed-off-by:
-
Harvey Harrison authored
The define in kernel.h can be done away with at a later time. Signed-off-by:
-
Harvey Harrison authored
Takes a pointer to a IPv6 address and formats it in the usual colon-separated hex format: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx Each 16 bit word is printed in network-endian byteorder. %#p6 is also supported and will omit the colons. %p6 is a replacement for NIP6_FMT and NIP6() %#p6 is a replacement for NIP6_SEQFMT and NIP6() Note that NIP6() took a struct in6_addr whereas this takes a pointer to a struct in6_addr. Signed-off-by:
-
Martin Willi authored
Add new_mapping() implementation to the netlink xfrm_mgr to notify address/port changes detected in UDP encapsulated ESP packets. Signed-off-by:
Martin Willi <martin@strongswan.org> Signed-off-by:
-
Alexey Dobriyan authored
call_rcu() will unconditionally rewrite RCU head anyway. Applies to struct neigh_parms struct neigh_table struct net struct cipso_v4_doi struct in_ifaddr struct in_device rt->u.dst Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Acked-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Alexey Dobriyan authored
ifdef out * struct sk_buff::sp (pointer) * struct dst_entry::xfrm (pointer) * struct sock::sk_policy (2 pointers) Signed-off-by:
-
Patrick McHardy authored
Signed-off-by:
-
Eric W. Biederman authored
To make testing of the network namespace simpler allow the network namespace code and the sysfs code to be compiled and run at the same time. To do this only virtual devices are allowed in the additional network namespaces and those virtual devices are not placed in the kobject tree. Since virtual devices don't actually do anything interesting hardware wise that needs device management there should be no loss in keeping them out of the kobject tree and by implication sysfs. The gain in ease of testing and code coverage should be significant. Changelog: v2: As pointed out by Benjamin Thery it only makes sense to call device_rename in the initial network namespace for now. Signed-off-by:Eric W. Biederman <ebiederm@xmission.com> Acked-by:
Benjamin Thery <benjamin.thery@bull.net> Tested-by:
Serge Hallyn <serue@us.ibm.com> Acked-by:
-
Johannes Berg authored
A number of places still use %02x:...:%02x because it's in debug statements or for no real reason. Make a few of them use %pM. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Johannes Berg authored
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by:
-
Johannes Berg authored
Also remove a few stray DECLARE_MAC_BUF that were no longer used at all. Signed-off-by:
-
Harvey Harrison authored
Add format specifiers for printing out six colon-separated bytes: MAC addresses (%pM): xx:xx:xx:xx:xx:xx %#pM is also supported and omits the colon separators. Signed-off-by:
-
Neil Horman authored
This is a patch to provide on demand route cache rebuilding. Currently, our route cache is rebulid periodically regardless of need. This introduced unneeded periodic latency. This patch offers a better approach. Using code provided by Eric Dumazet, we compute the standard deviation of the average hash bucket chain length while running rt_check_expire. Should any given chain length grow to larger that average plus 4 standard deviations, we trigger an emergency hash table rebuild for that net namespace. This allows for the common case in which chains are well behaved and do not grow unevenly to not incur any latency at all, while those systems (which may be being maliciously attacked), only rebuild when the attack is detected. This patch take 2 other factors into account: 1) chains with multiple entries that differ by attributes that do not affect the hash value are only counted once, so as not to unduly bias system to rebuilding if features like QOS are heavily used 2) if rebuilding crosses a certain threshold (which is adjustable via the added sysctl in this patch), route caching is disabled entirely for that net namespace, since constant rebuilding is less efficient that no caching at all Tested successfully by me. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
- 27 Oct, 2008 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: fw-sbp2: fix races firewire: fw-sbp2: delay first login to avoid retries firewire: fw-ohci: initialization failure path fixes firewire: fw-ohci: don't leak dma memory on module removal firewire: fix struct fw_node memory leak firewire: Survive more than 256 bus resets
-
