- 10 Jun, 2009 2 commits
-
-
Mike Frysinger authored
The function graph tracer is called just "function_graph" (no trailing "_tracer" needed). Signed-off-by:
Mike Frysinger <vapier@gentoo.org> LKML-Reference: <1244623722-6325-1-git-send-email-vapier@gentoo.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org>
-
Li Zefan authored
Fix building failures when CONFIG_BLOCK == n. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> LKML-Reference: <4A2F1520.8020003@cn.fujitsu.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
- 09 Jun, 2009 5 commits
-
-
Steven Rostedt authored
When reading the trace buffer, there is a race that when a module is unloaded it removes events that is stilled referenced in the buffers. This patch adds the protection around the unloading of the events from modules and the reading of the trace buffers. Signed-off-by: -
Steven Rostedt authored
The code to update the print formats for events requires a vprintf format in the trace_seq. This patch adds that interface. Signed-off-by: -
Steven Rostedt authored
The sector field is either u64 or unsigned long depending on the arch. This patch casts the sector to unsigned long long to prevent the printf warnings. [ Impact: remove compile warnings ] Signed-off-by: -
Li Zefan authored
TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to this tracepoint: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions ... Cons: - no dev_t info for the output of plug, unplug_timer and unplug_io events. no dev_t info for getrq and sleeprq events if bio == NULL. no dev_t info for rq_abort,...,rq_requeue events if rq->rq_disk == NULL. This is mainly because we can't get the deivce from a request queue. But this may change in the future. - A packet command is converted to a string in TP_assign, not TP_print. While blktrace do the convertion just before output. Since pc requests should be rather rare, this is not a big issue. - In blktrace, an event can have 2 different print formats, but a TRACE_EVENT has a unique format, which means we have some unused data in a trace entry. The overhead is minimized by using __dynamic_array() instead of __array(). I've benchmarked the ioctl blktrace vs the splice based TRACE_EVENT tracing: dd dd + ioctl blktrace dd + TRACE_EVENT (splice) 1 7.36s, 42.7 MB/s 7.50s, 42.0 MB/s 7.41s, 42.5 MB/s 2 7.43s, 42.3 MB/s 7.48s, 42.1 MB/s 7.43s, 42.4 MB/s 3 7.38s, 42.6 MB/s 7.45s, 42.2 MB/s 7.41s, 42.5 MB/s So the overhead of tracing is very small, and no regression when using those trace events vs blktrace. And the binary output of TRACE_EVENT is much smaller than blktrace: # ls -l -h -rw-r--r-- 1 root root 8.8M 06-09 13:24 sda.blktrace.0 -rw-r--r-- 1 root root 195K 06-09 13:24 sda.blktrace.1 -rw-r--r-- 1 root root 2.7M 06-09 13:25 trace_splice.out Following are some comparisons between TRACE_EVENT and blktrace: plug: kjournald-480 [000] 303.084981: block_plug: [kjournald] kjournald-480 [000] 303.084981: 8,0 P N [kjournald] unplug_io: kblockd/0-118 [000] 300.052973: block_unplug_io: [kblockd/0] 1 kblockd/0-118 [000] 300.052974: 8,0 U N [kblockd/0] 1 remap: kjournald-480 [000] 303.085042: block_remap: 8,0 W 102736992 + 8 <- (8,8) 33384 kjournald-480 [000] 303.085043: 8,0 A W 102736992 + 8 <- (8,8) 33384 bio_backmerge: kjournald-480 [000] 303.085086: block_bio_backmerge: 8,0 W 102737032 + 8 [kjournald] kjournald-480 [000] 303.085086: 8,0 M W 102737032 + 8 [kjournald] getrq: kjournald-480 [000] 303.084974: block_getrq: 8,0 W 102736984 + 8 [kjournald] kjournald-480 [000] 303.084975: 8,0 G W 102736984 + 8 [kjournald] bash-2066 [001] 1072.953770: 8,0 G N [bash] bash-2066 [001] 1072.953773: block_getrq: 0,0 N 0 + 0 [bash] rq_complete: konsole-2065 [001] 300.053184: block_rq_complete: 8,0 W () 103669040 + 16 [0] konsole-2065 [001] 300.053191: 8,0 C W 103669040 + 16 [0] ksoftirqd/1-7 [001] 1072.953811: 8,0 C N (5a 00 08 00 00 00 00 00 24 00) [0] ksoftirqd/1-7 [001] 1072.953813: block_rq_complete: 0,0 N (5a 00 08 00 00 00 00 00 24 00) 0 + 0 [0] rq_insert: kjournald-480 [000] 303.084985: block_rq_insert: 8,0 W 0 () 102736984 + 8 [kjournald] kjournald-480 [000] 303.084986: 8,0 I W 102736984 + 8 [kjournald] Changelog from v2 -> v3: - use the newly introduced __dynamic_array(). Changelog from v1 -> v2: - use __string() instead of __array() to minimize the memory required to store hex dump of rq->cmd(). - support large pc requests. - add missing blk_fill_rwbs_rq() in block_rq_requeue TRACE_EVENT. - some cleanups. Signed-off-by: -
Steven Rostedt authored
The update of ret got mistakenly added to the if statement of rb_try_to_discard. The variable ret should be 1 on commit and zero otherwise. [ Impact: fix compiler warning and real bug ] Signed-off-by:
-
- 08 Jun, 2009 1 commit
-
-
Peter Zijlstra authored
On Sun, 7 Jun 2009, Ingo Molnar wrote: > Testing tracer sched_switch: <6>Starting ring buffer hammer > PASSED > Testing tracer sysprof: PASSED > Testing tracer function: PASSED > Testing tracer irqsoff: > ============================================= > PASSED > Testing tracer preemptoff: PASSED > Testing tracer preemptirqsoff: [ INFO: possible recursive locking detected ] > PASSED > Testing tracer branch: 2.6.30-rc8-tip-01972-ge5b9078-dirty #5760 > --------------------------------------------- > rb_consumer/431 is trying to acquire lock: > (&cpu_buffer->reader_lock){......}, at: [<c109eef7>] ring_buffer_reset_cpu+0x37/0x70 > > but task is already holding lock: > (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0 > > other info that might help us debug this: > 1 lock held by rb_consumer/431: > #0: (&cpu_buffer->reader_lock){......}, at: [<c10a019e>] ring_buffer_consume+0x7e/0xc0 The ring buffer is a generic structure, and can be used outside of ftrace. If ftrace traces within the use of the ring buffer, it can produce false positives with lockdep. This patch passes in a static lock key into the allocation of the ring buffer, so that different ring buffers will have their own lock class. Reported-by:Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1244477919.13761.9042.camel@twins> [ store key in ring buffer descriptor ] Signed-off-by:
-
- 05 Jun, 2009 1 commit
-
-
Ingo Molnar authored
Merge branch 'tip/tracing/ftrace-4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace
-
- 04 Jun, 2009 1 commit
-
-
Ingo Molnar authored
Merge reason: this mini-topic had outstanding problems that delayed its merge, so it does not fast-forward. Signed-off-by:
-
- 03 Jun, 2009 8 commits
-
-
Steven Rostedt authored
The current method of printing out a stack trace is to add a new line and print out the trace: yum-updatesd-3120 [002] 573.691303: => do_softirq => irq_exit => smp_apic_timer_interrupt => apic_timer_interrupt This looks a bit awkward, and if we have both stack and user stack traces running, it would be nice to have a title to tell them apart, although it is easy to tell by the output. This patch adds an annotation to the start of the stack traces: init-1 [003] 929.304979: <stack trace> => user_path_at => vfs_fstatat => vfs_stat => sys_newstat => system_call_fastpath cat-3459 [002] 1016.824040: <user stack trace> => <0000003aae6c0250> => <00007ffff4b06ae4> => <69636172742f6775> Signed-off-by: -
Steven Whitehouse authored
Here is an updated patch to include the extra call to trace_seq_init() as requested. This is vs. the latest -tip tree and fixes the use of multiple __print_flags and __print_symbolic in a single tracer. Also tested to ensure its working now: mount.gfs2-2534 [000] 235.850587: gfs2_glock_queue: 8.7 glock 1:2 dequeue PR mount.gfs2-2534 [000] 235.850591: gfs2_demote_rq: 8.7 glock 1:0 demote EX to NL flags:DI mount.gfs2-2534 [000] 235.850591: gfs2_glock_queue: 8.7 glock 1:0 dequeue EX glock_workqueue-2529 [000] 235.850666: gfs2_glock_state_change: 8.7 glock 1:0 state EX => NL tgt:NL dmt:NL flags:lDpI glock_workqueue-2529 [000] 235.850672: gfs2_glock_put: 8.7 glock 1:0 state NL => IV flags:I Signed-off-by:
Steven Whitehouse <swhiteho@redhat.com> LKML-Reference: <1244037123.29604.603.camel@localhost.localdomain> Signed-off-by:
-
walimis authored
According to "events/ftrace/user_stack/format", fix the output of user stack. before fix: sh-1073 [000] 31.137561: <b7f274fe> <- <0804e33c> <- <080835c1> after fix: sh-1072 [000] 37.039329: => <b7f8a4fe> => <0804e33c> => <080835c1> Signed-off-by:
walimis <walimisdev@gmail.com> LKML-Reference: <1244016090-7814-3-git-send-email-walimisdev@gmail.com> Signed-off-by:
-
walimis authored
According to "events/ftrace/kernel_stack/format", output format of kernel stack should use "=>" instead of "<=". The second problem is that we shouldn't skip the first entry in the stack, although it seems to be duplicated when used in the "function" tracer, but events also use it. If we skip the first one, we will drop the topmost entry of the stack. The last problem is that if the last entry is ULONG_MAX(0xffffffff), we should drop it, otherwise it will print a NULL name line. before fix: sh-1072 [000] 26.957239: sched_process_fork: parent sh:1072 child sh:1073 sh-1072 [000] 26.957262: <= syscall_call <= sh-1072 [000] 26.957744: sched_switch: task sh:1072 [120] (R) ==> sh:1073 [120] sh-1072 [000] 26.957752: <= preempt_schedule <= wake_up_new_task <= do_fork <= sys_clone <= syscall_call <= After fix: sh-1075 [000] 39.791848: sched_process_fork: parent sh:1075 child sh:1076 sh-1075 [000] 39.791871: => sys_clone => syscall_call sh-1075 [000] 39.792713: sched_switch: task sh:1075 [120] (R) ==> sh:1076 [120] sh-1075 [000] 39.792722: => schedule => preempt_schedule => wake_up_new_task => do_fork => sys_clone => syscall_call Signed-off-by: -
walimis authored
The last entry in the stack_dump_trace is ULONG_MAX, which is not a valid entry, but max_stack_trace.nr_entries has accounted for it. So when printing the header, we should decrease it by one. Before fix, print as following, for example: Depth Size Location (53 entries) <--- should be 52 ----- ---- -------- 0) 3264 108 update_wall_time+0x4d5/0x9a0 ... 51) 80 80 syscall_call+0x7/0xb ^^^ it's correct. Signed-off-by:
-
Steven Rostedt authored
Every buffer page in the ring buffer includes its own time stamp. When an event is recorded to the ring buffer with a delta time greater than what can be held in the event header, a time stamp event is created. If the the create timestamp falls over to the next buffer page, it is redundant because the buffer page holds a full time stamp. This patch will try to discard the time stamp when it falls to the start of the next page. This change also fixes a issues with disarding events. If most events are discarded, timestamps will start to creep into the ring buffer. If we do not discard the timestamps then they can fill up the ring buffer over time and waste space. This change will keep time stamps from filling up over another page. If something is recorded in the buffer page, and the rest is filtered, then the time stamps can only fill up to the end of the page. [ Impact: prevent time stamps from filling ring buffer ] Reported-by:
Tim Bird <tim.bird@am.sony.com> Signed-off-by:
-
Steven Rostedt authored
There are times that a race may happen that we add a timestamp in a nested write. This timestamp would just contain a zero delta and serves no purpose. Now that we have a way to discard events, this patch will try to discard the timestamp instead of just wasting the space in the ring buffer. Signed-off-by: -
Tim Bird authored
There's a bug in ring_buffer_discard_commit. The wrong pointer is being compared in order to check if the event can be freed from the buffer rather than discarded (i.e. marked as PAD). I noticed this when I was working on duration filtering. The bug is not deadly - it just results in lots of wasted space in the buffer. All filtered events are left in the buffer and marked as discarded, rather than being removed from the buffer to make space for other events. Unfortunately, when I fixed this bug, I got errors doing a filtered function trace. Multiple TIME_EXTEND events pile up in the buffer, and trigger the following loop overage warning in rb_iter_peek(): again: ... if (RB_WARN_ON(cpu_buffer, ++nr_loops > 10)) return NULL; I'm not sure what the best way is to fix this. I don't know if I should extend the loop threshhold, or if I should make the test more complex (ignore TIME_EXTEND events), or just get rid of this loop check completely. Note that if I implement a workaround for this, then I see another problem from rb_advance_iter(). I haven't tracked that one down yet. In general, it seems like the case of removing filtered events has not been working properly, and so some assumptions about buffer invariant conditions need to be revisited. Here's the patch for the simple fix: Compare correct pointer for checking if an event can be freed rather than left as discarded in the buffer. Signed-off-by:
-
- 02 Jun, 2009 10 commits
-
-
Steven Rostedt authored
A race was found that if one were to enable and disable the function profiler repeatedly, then the system can panic. This was because a profiled function may be preempted just before disabling interrupts. While the profiler is disabled and then reenabled, the preempted function could start again, and access the hash as it is being initialized. This just adds a check in the irq disabled part to check if the profiler is enabled, and if it is not then it will just exit. When the system is disabled, the profile_enabled variable is cleared before calling the unregistering of the function profiler. This unregistering calls stop machine which also acts as a synchronize schedule. [ Impact: fix panic in enabling/disabling function profiler ] Signed-off-by: -
Steven Rostedt authored
The trace_pipe did not recognize the latency format flag and would produce different output than the trace file. The problem was partly due that the trace flags in the iterator was not set as well as the trace_pipe zeros out part of the iterator (including the flags) to be able to use the same routines as the trace file. trace_flags of the iterator should not cause any problems when not zeroed out by for trace_pipe. Reported-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Steven Rostedt authored
After converting the softirq tracer to use te flags options, this caused a regression with the name. Since the flag was used directly it was printed out (i.e. HRTIMER_SOFTIRQ). This patch only shows the softirq name without the SOFTIRQ part. [ Impact: fix regression of output from softirq events ] Signed-off-by: -
Steven Whitehouse authored
A patch to allow the use of __print_symbolic and __print_flags from a module. This allows the current GFS2 tracing patch to build. Signed-off-by:
-
Li Zefan authored
__string() is limited: - it's a char array, but we may want to define array with other types - a source string should be available, but we may just know the string size We introduce __dynamic_array() to break those limitations, and __string() becomes a wrapper of it. As a side effect, now __get_str() can be used in TP_fast_assign but not only TP_print. Take XFS for example, we have the string length in the dirent, but the string itself is not NULL-terminated, so __dynamic_array() can be used: TRACE_EVENT(xfs_dir2, TP_PROTO(struct xfs_da_args *args), TP_ARGS(args), TP_STRUCT__entry( __field(int, namelen) __dynamic_array(char, name, args->namelen + 1) ... ), TP_fast_assign( char *name = __get_str(name); if (args->namelen) memcpy(name, args->name, args->namelen); name[args->namelen] = '\0'; __entry->namelen = args->namelen; ), TP_printk("name %.*s namelen %d", __entry->namelen ? __get_str(name) : NULL __entry->namelen) ); [ Impact: allow defining dynamic size arrays ] Signed-off-by: -
Li Zefan authored
Currently TP_fast_assign has a limitation that we can't define local variables in it. Here's one use case when we introduce __dynamic_array(): TP_fast_assign( type *p = __get_dynamic_array(item); foo(p); bar(p); ), [ Impact: allow defining local variables in TP_fast_assign ] Signed-off-by:
-
Li Zefan authored
"tsize" should be "\tsize". Also remove the space before "__str_loc". Before: # cat tracing/events/irq/irq_handler_entry/format ... field:int irq; offset:12; size:4; field: __str_loc name; offset:16;tsize:2; ... After: # cat tracing/events/irq/irq_handler_entry/format ... field:int irq; offset:12; size:4; field:__str_loc name; offset:16; size:2; ... [ Impact: standardize __string field description in events format file ] Signed-off-by:Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
-
Steven Rostedt authored
Both event tracer and sched switch plugin are selected by default by all generic tracers. But if no generic tracer is enabled, their options appear. But ether one of them will select the other, thus it only makes sense to have the default tracers be selected by one option. [ Impact: clean up kconfig menu ] Signed-off-by: -
Steven Rostedt authored
There are two options that are selected by all tracers, but we want to have those options available when no tracer is selected. These are The event tracer and sched switch tracer. The are enabled by all tracers, but if a tracer is not selected we want the options to appear. All tracers including them select TRACING. Thus what we would like to do is: config EVENT_TRACER bool "prompt" depends on TRACING select TRACING But that gives us a bug in the kbuild system since we just created a circular dependency. We only want the prompt to show when TRACING is off. This patch adds GENERIC_TRACER that all tracers will select instead of TRACING. The two options (sched switch and event tracer) will select TRACING directly and depend on !GENERIC_TRACER. This solves the cicular dependency. [ Impact: hide options that are selected by default ] Signed-off-by: -
Steven Rostedt authored
When using ftrace=function on the command line to trace functions on boot up, one can not filter out functions that are commonly called. This patch adds two new ftrace command line commands. ftrace_notrace=function-list ftrace_filter=function-list Where function-list is a comma separated list of functions to filter. The ftrace_notrace will make the functions listed not be included in the function tracing, and ftrace_filter will only trace the functions listed. These two act the same as the debugfs/tracing/set_ftrace_notrace and debugfs/tracing/set_ftrace_filter respectively. The simple glob expressions that are allowed by the filter files can also be used by the command line interface. ftrace_notrace=rcu*,*lock,*spin* Will not trace any function that starts with rcu, ends with lock, or has the word spin in it. Note, if the self tests are enabled, they may interfere with the filtering set by the command lines. Signed-off-by:
-
- 01 Jun, 2009 10 commits
-
-
Frederic Weisbecker authored
register_stat_tracer() uses list_for_each_entry_safe to check whether a tracer is already present in the list. But we don't delete anything from the list here, so we don't need the safe version [ Impact: cleanup list use is stat tracing ] Signed-off-by: -
Li Zefan authored
- remove duplicate code in stat_seq_init() - update comments to reflect the change from stat list to stat rbtree [ Impact: clean up ] Signed-off-by:
-
Li Zefan authored
When closing a trace_stat file, we destroy the rbtree constructed during file open, but there is memory leak that the root node is not freed. [ Impact: fix memory leak when closing a trace_stat file ] Signed-off-by:
-
Li Zefan authored
Currently the output of trace_stat/workqueues is totally reversed: # cat /debug/tracing/trace_stat/workqueues ... 1 17 17 210 37 `-blk_unplug_work+0x0/0x57 1 3779 3779 181 11 |-cfq_kick_queue+0x0/0x2f 1 3796 3796 kblockd/1:120 ... The correct output should be: 1 3796 3796 kblockd/1:120 1 3779 3779 181 11 |-cfq_kick_queue+0x0/0x2f 1 17 17 210 37 `-blk_unplug_work+0x0/0x57 It's caused by "tracing/stat: replace linked list by an rbtree for sorting" (53059c9b67a62a3dc8c80204d3da42b9267ea5a0). dummpy_cmp() should return -1, so rb_node will always be inserted as right-most node in the rbtree, thus we sort the output in ascending order. [ Impact: fix the output of trace_stat/workqueues ] Signed-off-by: -
Frederic Weisbecker authored
When the stat tracing framework prepares the entries from a tracer to output them to the user, it starts by computing a linear sort through a linked list to give the entries ordered by relevance to the user. This is quite ugly and causes a small latency when we begin to read the file. This patch changes that by turning the linked list into a red-black tree. Athough the whole iteration using the start and next tracer callbacks while opening the file remain the same, it is now much more fast and scalable. The rbtree guarantees O(log(n)) insertions whereas a linked list with linear sorting brought us a O(n) despair. Now the (visible) latency has disapeared. [ Impact: kill the latency while starting to read a stat tracer file ] Signed-off-by: -
Frederic Weisbecker authored
The "trace" prefix in struct trace_stat_session type is annoying while reading the trace_stat.c file. It makes the lines longer, and is not that much useful to explain the sense of this type. Just keep "struct stat_session" for this type. [ Impact: make the code a bit more readable ] Signed-off-by: -
Zhaolei authored
The blankline between each cpu's workqueue stat is not necessary, because the cpu number is enough to part them by eye. Old style also caused a blankline below headline, and made code complex by using lock, disableirq and get cpu var. Old style: # CPU INSERTED EXECUTED NAME # | | | | 0 8644 8644 events/0 0 0 0 cpuset ... 0 1 1 kdmflush 1 35365 35365 events/1 ... New style: # CPU INSERTED EXECUTED NAME # | | | | 0 8644 8644 events/0 0 0 0 cpuset ... 0 1 1 kdmflush 1 35365 35365 events/1 ... [ Impact: provide more readable code ] Signed-off-by:
Zhao Lei <zhaolei@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Zhaolei authored
cpu_workqueue_stats->first_entry is useless because we can retrieve the header of a cpu workqueue using: if (&cpu_workqueue_stats->list == workqueue_cpu_stat(cpu)->list.next) [ Impact: cleanup ] Signed-off-by:
-
Zhaolei authored
No need to use list_for_each_entry_safe() in iteration without deleting any node, we can use list_for_each_entry() instead. [ Impact: cleanup ] Signed-off-by:
-
Zhaolei authored
v3: zhaolei@cn.fujitsu.com: Change TRACE_EVENT definition to new format introduced by Steven Rostedt: consolidate trace and trace_event headers v2: kosaki@jp.fujitsu.com: print the function names instead of addr, and zap the work addr v1: zhaolei@cn.fujitsu.com: Make workqueue tracepoints use TRACE_EVENT macro TRACE_EVENT is a more generic way to define tracepoints. Doing so adds these new capabilities to the tracepoints: - zero-copy and per-cpu splice() tracing - binary tracing without printf overhead - structured logging records exposed under /debug/tracing/events - trace events embedded in function tracer output and other plugins - user-defined, per tracepoint filter expressions Then, this patch converts DEFINE_TRACE to TRACE_EVENT in workqueue related tracepoints. [ Impact: expand workqueue tracer to events tracing ] Signed-off-by:KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
- 27 May, 2009 2 commits
-
-
Zhaolei authored
"call" is an argument of macro, but it is also used as a local variable name of function in macro. We should keep this local variable name distinct from any CPP macro parameter name if both are in the same macro scope, although it hasn't caused any problem yet. [ Impact: robustify macro ] Signed-off-by:
-
Heiko Carstens authored
s390 code uses smp_processor_id() in __raw_spin_lock() code which reveals that a (raw) spinlock is taken without preemption disabled. This can potentially deadlock. To fix this explicitly disable and enable preemption. BUG: using smp_processor_id() in preemptible [00000000] code: cat/2278 caller is trace_find_cmdline+0x40/0xfc CPU: 0 Not tainted 2.6.30-rc7-dirty #39 Process cat (pid: 2278, task: 000000003faedb68, ksp: 000000003b33b988) 000000003b33b988 000000003b33bae0 0000000000000002 0000000000000000 000000003b33bb80 000000003b33baf8 000000003b33baf8 00000000000175d6 0000000000000001 000000003b33b988 000000003f9b0000 000000000000000b 000000000000000c 000000003b33bb40 000000003b33bae0 0000000000000000 0000000000000000 00000000000175d6 000000003b33bae0 000000003b33bb28 Call Trace: ([<00000000000174b2>] show_trace+0x112/0x170) [<0000000000017582>] show_stack+0x72/0x100 [<0000000000441538>] dump_stack+0xc8/0xd8 [<000000000025c350>] debug_smp_processor_id+0x114/0x130 [<00000000000bf0e4>] trace_find_cmdline+0x40/0xfc [<00000000000c35d4>] trace_print_context+0x58/0xac [<00000000000bb676>] print_trace_line+0x416/0x470 [<00000000000bc8fe>] s_show+0x4e/0x428 [<000000000013834e>] seq_read+0x36a/0x5d4 [<0000000000112a78>] vfs_read+0xc8/0x174 [<0000000000112c58>] SyS_read+0x74/0xc4 [<000000000002c7ae>] sysc_noemu+0x10/0x16 [<000002000012436c>] 0x2000012436c 1 lock held by cat/2278: #0: (&p->lock){+.+.+.}, at: [<0000000000138056>] seq_read+0x72/0x5d4 [ Impact: fix preempt-unsafe raw spinlock ] Signed-off-by:Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by:
-
