- 24 Jul, 2009 40 commits
-
-
Luis R. Rodriguez authored
There are a lot of gaps here. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
This saves us 2733 bytes. text data bss dec hex filename 252265 3628 1584 257477 3edc5 ath9k-has-b-rate.ko 249905 3628 1584 255117 3e48d ath9k.ko Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Siged-off-by:
-
Luis R. Rodriguez authored
Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
What this does is get us our next lower rate so call it that, ath_rc_get_lower_rix(). Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
This is just calling another helper, so just use the other helper directly. This should make it clear that when do not find the next rate we stick to the current one. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
This is not used, remove this. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
This is not used, and when we need to get the lowest rate we should simply use mac80211's own rate_lowest_index(sband, sta). Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
This has no functional change and just cleans up the code to be more legible and removes a useless variable for Multi Rate Retry. For regular frames we use 2 retries for MRR segments [0-2]. For the last MRR segment [3] we use 4. MRR[0] = 2 MRR[1] = 2 MRR[2] = 2 MRR[3] = 4 Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
This removes the work around implemented for transmitting on an unsupported band on iwlwifi. This was added via the patch: 8e1856e82cb8f541e925738bebfbc473420cda68: iwlwifi: fix rs_get_rate WARN_ON() Cc: Mohamed Abbas <mohamed.abbas@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Luis R. Rodriguez authored
The case where no vaid rate is found should not happen now but to help debugging and downgrade this to a warn. Signed-off-by:
-
Luis R. Rodriguez authored
When we're associated we should be able to send data to target sta. If we cannot we may be trying to use the incorrect band to talk to the sta. Lets catch any such cases, warn, and drop the frames to not invalidate assumptions being made on rate control algorithms when they have a valid sta to communicate with. Any such cases should be handled and fixed. Signed-off-by:
-
Jiri Slaby authored
Add omitted mutex_unlock to one of wl12xx_op_start fail paths (when wl12xx_chip_wakeup fails). [v2] Power off the device, because: \= cite from http://marc.info/?l=linux-kernel&m=124755028209880&w=2 If the chip cannot be booted, why should it remain powered on? In some rare cases, the chip might fail to initialize, but can recover if powered off and on again, so turning it off at this point is the right thing to do. =/ Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Reviewed-by:
Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by:
-
Johannes Berg authored
iwl_dump_nic_error_log can be static and iwl_dump_nic_event_log doesn't need to be exported. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Hin-Tak Leung authored
Adding more detailed info about Asus motherboards and Ralink devices. Signed-off-by:
Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by:
Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by:
-
Hin-Tak Leung authored
New device supported by the zd1211rw driver reported to linux-wireless. Device string from lsusb: "ID 083a:e501 Accton Technology Corp. ZD1211B" RF type from dmesg: zd1211b chip 083a:e501 v4810 high 00-1a-2a AL2230_RF pa0 g--NS Signed-off-by:
-
Johannes Berg authored
The work that we cancel there requires the cfg80211_mutex, so we can't cancel it under the mutex, which is fine, we can just move it to after the locked section. Signed-off-by:
-
Johannes Berg authored
In "mac80211: monitor the connection" I forgot to add code to cancel the new timers & work when the interface is brought down, which isn't a problem if you just bring it down, but _is_ a problem when you destroy the interface. Correct this lapse. Signed-off-by:
-
Julia Lawall authored
The result of container_of should not be NULL. In particular, in this case the argument to the enclosing function has passed though INIT_WORK, which dereferences it, implying that its container cannot be NULL. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ identifier fn,work,x,fld; type T; expression E1,E2; statement S; @@ static fn(struct work_struct *work) { ... when != work = E1 x = container_of(work,T,fld) ... when != x = E2 - if (x == NULL) S ... } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
Zhu Yi <yi.zhu@intel.com> Signed-off-by:
-
Gábor Stefanik authored
cfg80211_set_wpa_version completely missed the use case when disabling WPA, considering IW_AUTH_WPA_VERSION_DISABLED an invalid argument. This caused weird error messages in wpa_supplicant. Signed-off-by:
-
Ivo van Doorn authored
The DEVICE_STATE_DISABLED_RADIO_HW flag is only read but never set, it is an ancient part of one of the many versions of the rfkill implementations in rt2x00. It is about time is disappears. Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Christian Lamparter authored
This patch roughly implements xmit aggregation for ar9170-like device. Not all AP are compatible with the driver(and firmware) yet, so YMMV. A more refined code will definitely need the final HT specification to be available for the public, lots of firmware modification and possibly a redesigned driver just for good measure. Sadly, these conditions won't come true anytime soon... Signed-off-by:
Christian Lamparter <chunkeey@web.de> Signed-off-by:
-
Christian Lamparter authored
This patch enhances the eeprom parser to generate customized channel list for every device. Signed-off-by:
-
Johannes Berg authored
The "what-was-I-thinking-if-anything" patch. Clearly, if cfg80211_send_disassoc() does wdev_lock() and then calls __cfg80211_send_disassoc(), the latter shouldn't lock again. And the sme_state test is ... no further comments. Signed-off-by:
-
Stefan Steuerwald authored
Implement set_tim callback for all rt2x00 drivers, this makes the device wake up powersaving stations properly while in AP mode. The only way to update the beacon is by simply calling mac80211 and requesting the new beacon. This means the set_tim() event is mostly the same as a beacon_done() event which was already defined in rt2x00lib. Signed-off-by:
Stefan Steuerwald <salsasepp@googlemail.com> Signed-off-by:
-
Johannes Berg authored
When connected to a BSS, or joined to an IBSS, we'll want to know in userspace without using wireless extensions, so report the BSS status in the BSS list. Userspace can query the BSS list, display all the information and retrieve the station information as well. For example (from hwsim): $ iw dev wlan1 scan dump BSS 02:00:00:00:00:00 (on wlan1) -- associated freq: 2462 beacon interval: 100 capability: ESS ShortSlotTime (0x0401) signal: -50.00 dBm SSID: j Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0 DS Paramater set: channel 11 ERP: <no flags> Extended supported rates: 24.0 36.0 48.0 54.0 Signed-off-by:
-
Johannes Berg authored
Pavel reported that you can't set the SSID from "foo" to "bar". I tried reproducing, but used different values, with different lengths, and thus never saw the obvious problem. Reported-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
-
Johannes Berg authored
This variable is only used internally, _while_ connected. If we use it, the sequence # iwconfig wlan1 essid foo <connects> # iwconfig wlan1 essid "" <disconnects> # iwconfig will still display "foo" as the SSID afterwards, which is obviously quite bogus. Fix this by only displaying the wext SSID, if present. Signed-off-by:
-
Johannes Berg authored
There's no reason to think that hwsim has any actual signal strength, but for testing it is very useful to have it report _some_ value to the stack so I can see if the value ends up being reported correctly Signed-off-by:
-
Johannes Berg authored
Instead of using the wext BSSID which may be NULL if you haven't explicitly set one, we should instead use the current_bss pointer -- if that's NULL we aren't connected anyway. Fixes missing signal quality output reported to me internally at Intel. Signed-off-by:
-
Helmut Schaa authored
In cfg80211_scan_request n_channels refers to the total number of channels to scan. Update the misleading comment accordingly. Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
-
Johannes Berg authored
1) there's a spin_lock() that needs to be spin_lock_bh() 2) action frames of size 24 might cause an out-of-bounds memory access (for the 25th byte only, so no big deal) Signed-off-by:
-
Johannes Berg authored
The cfg80211_sme_disassoc() function is already holding a lock here that cfg80211_mlme_deauth() would take, so it needs to use __cfg80211_mlme_deauth() instead. Signed-off-by:
-
Johannes Berg authored
With the recent MLME rework I accidentally removed the connection monitoring code. In order to add it back, this patch will add new code to monitor both for beacon loss and for the connection actually working, with possibly separate triggers. When no unicast frames have been received from the AP for (currently) two seconds, we will send the AP a probe request. Also, when we don't see beacons from the AP for two seconds, we do the same (but those times need not be the same due to the way the code is now written). Additionally, clean up the parameters to the ieee80211_set_disassoc() function that I need here, those are all useless except sdata. Signed-off-by:
-
Johannes Berg authored
We have, sometimes, multiple things that want to run but don't have their own timer. Introduce a new function to mac80211's mlme run_again() that makes sure that the timer will run again at the _first_ needed time, use that function and also properly reprogram the timer once it fired. Signed-off-by:
-
Reinette Chatre authored
We need to provide a reasonable minimum that will result in a working setup if used. Set minimum to be 10 to provide for 4 standard TX queues + 1 command queue + 2 (unused) HCCA queues + 4 HT queues (one per AC). We allow the user to change the number of queues used via a module parameter and use this minimum value to check if it is valid. Without this patch a user can select a value for the number of queues that will result in a failing setup. Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Acked-by:
-
Reinette Chatre authored
* Rename maximum number of queue (TFD_QUEUE_MAX) to IWL39_NUM_QUEUES to be consistent with rest of iwlwifi. * Remove unused defines. * Fix loops that iterate over number of TX queues to stop when maximum is reached (currently it is maximum + 1). * Remove queues_num module parameter as it is not used. Signed-off-by:
-
Reinette Chatre authored
debugfs files are created with 644 permissions which gives everybody read access. This presents a security issue if a user opens the file and holds it open at the time the driver removes the file. At this point invalid memory will be accessed. Fix this by only allowing root to read debugfs files. Signed-off-by:
-
Wey-Yi Guy authored
This move the show_qos file from sysfs to debugfs because the "one value per file" sysfs rule. The file is located in /sys/kernel/debug/ieee80211/phy0/iwlagn/data Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Zhu Yi authored
This patch avoids memcpy from wdev->wext.ibss.bssid if it is NULL. This could happen if we SIOCGIWAP before SIOCSIWAP. Signed-off-by:
-
Marcin Slusarz authored
Different revisions of WUSB54GC-EU use different chipsets - v2 uses rtl8187, but v3 uses Ralink RT3070. Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Przemyslaw Kulczycki <azrael@autocom.pl> Cc: John W. Linville <linville@tuxdriver.com> Cc: Linux wireless <linux-wireless@vger.kernel.org> Signed-off-by:
-
