- 10 Mar, 2008 4 commits
-
-
Jesper Juhl authored
In drivers/pci/hotplug/ibmphp_ebda.c::ebda_rsrc_controller(), storage is allocated with kzalloc() and assigned to 'tmp_slot'. Then lots of stuff, like ->flag, ->supported_speed etc is set in tmp_slot. A bit further down there's then this test : if (!bus_info_ptr1) { rc = -ENODEV; goto error; } At this point, tmp_slot has not been assigned to anything, so when erroring-out we want to free it, but nothing at the 'error:' label free's 'tmp_slot' - and we can't really free 'tmp_slot' at 'error:' since we may jump to that label later when 'tmp_slot' *has* been used and we do not want it freed. So, the only sane option left seems to be to kfree(tmp_slot) just before jumping to the 'error:' label in the one place where this is what actually makes sense. The following patch does just that and thus kills off a tiny potential memory leak. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Andrew Morton authored
a) DECLARE_PCI_DEVICE_TABLE is misnamed. It is used to *define* tables, not to declare them. It should be called DEFINE_PCI_DEVICE_TABLE. b) It's lame, anyway. We could implement any number of such helper thingies, but we choose not to. So I wouldn't go adding code which uses this thing until it has a correct name, and until we've decided that we actually want to live with it. From: Andrew Morton <akpm@linux-foundation.org> Cc: Jonas Bonn <jonas@southpole.se> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Linus Torvalds authored
-
Jesper Juhl authored
Don't include linux/backing-dev.h twice in mm/filemap.c, it's pointless. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 09 Mar, 2008 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrtLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt: time: remove obsolete CLOCK_TICK_ADJUST time: don't touch an offlined CPU's ts->tick_stopped in tick_cancel_sched_timer() time: prevent the loop in timespec_add_ns() from being optimised away ntp: use unsigned input for do_div()
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] skcipher: Fix section mismatches
-
Ivan Kokshaysky authored
This fixes a boot panic due to a typo in the recent iommu patchset from FUJITA Tomonori <tomof@acm.org> - the code used dma_get_max_seg_size() instead of dma_get_seg_boundary(). It also removes a couple of unnecessary BUG_ON() and ALIGN() macros. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reported-and-tested-by: Bob Tracy <rct@frus.com> Acked-by: FUJITA Tomonori <tomof@acm.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Gregory Haskins authored
We currently set the root-domain online span automatically when the domain is added to the cpu if the cpu is already a member of cpu_online_map. This was done as a hack/bug-fix for s2ram, but it also causes a problem with hotplug CPU_DOWN transitioning. The right way to fix the original problem is to actually respond to CPU_UP events, instead of CPU_ONLINE, which is already too late. This solves the hung reboot regression reported by Andrew Morton and others. Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Roman Zippel authored
The first version of the ntp_interval/tick_length inconsistent usage patch was recently merged as bbe4d18a http://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=bbe4d18ac2e058c56adb0cd71f49d9ed3216a405 While the fix did greatly improve the situation, it was correctly pointed out by Roman that it does have a small bug: If the users change clocksources after the system has been running and NTP has made corrections, the correctoins made against the old clocksource will be applied against the new clocksource, causing error. The second attempt, which corrects the issue in the NTP_INTERVAL_LENGTH definition has also made it up-stream as commit e13a2e61 http://git.kernel.org/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e13a2e61dd5152f5499d2003470acf9c838eab84 Roman has correctly pointed out that CLOCK_TICK_ADJUST is calculated based on the PIT's frequency, and isn't really relevant to non-PIT driven clocksources (that is, clocksources other then jiffies and pit). This patch reverts both of those changes, and simply removes CLOCK_TICK_ADJUST. This does remove the granularity error correction for users of PIT and Jiffies clocksource users, but the granularity error but for the majority of users, it should be within the 500ppm range NTP can accommodate for. For systems that have granularity errors greater then 500ppm, the "ntp_tick_adj=" boot option can be used to compensate. [johnstul@us.ibm.com: provided changelog] [mattilinnanvuori@yahoo.com: maek ntp_tick_adj static] Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Acked-by: john stultz <johnstul@us.ibm.com> Signed-off-by: Matti Linnanvuori <mattilinnanvuori@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: mingo@elte.hu Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Karsten Wiese authored
Silences WARN_ONs in rcu_enter_nohz() and rcu_exit_nohz(), which appeared before caused by (repeated) calls to: $ echo 0 > /sys/devices/system/cpu/cpu1/online $ echo 1 > /sys/devices/system/cpu/cpu1/online Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: johnstul@us.ibm.com Cc: Rafael Wysocki <rjw@sisk.pl> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Segher Boessenkool authored
Since some architectures don't support __udivdi3(). Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Cc: john stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
David Howells authored
The kernel NTP code shouldn't hand 64-bit *signed* values to do_div(). Make it instead hand 64-bit unsigned values. This gets rid of a couple of warnings. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
- 08 Mar, 2008 3 commits
-
-
Roland McGrath authored
In commit ee7c82da ("wait_task_stopped: simplify and fix races with SIGCONT/SIGKILL/untrace"), the magic (short) cast when storing si_code was lost in wait_task_stopped. This leaks the in-kernel CLD_* values that do not match what userland expects. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Herbert Xu authored
The previous patch to move chainiv and eseqiv into blkcipher created a section mismatch for the chainiv exit function which was also called from __init. This patch removes the __exit marking on it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Roland McGrath authored
This makes 64-bit ptrace calls setting the 64-bit orig_ax field for a 32-bit task sign-extend the low 32 bits up to 64. This matches what a 64-bit debugger expects when tracing a 32-bit task. This follows on my "x86_64 ia32 syscall restart fix". This didn't matter until that was fixed. The debugger ignores or zeros the high half of every register slot it sets (including the orig_rax pseudo-register) uniformly. It expects that the setting of the low 32 bits always has the same meaning as a 32-bit debugger setting those same 32 bits with native 32-bit facilities. This never arose before because the syscall restart check never matched any -ERESTART* values due to lack of sign extension. Before that fix, even 32-bit ptrace setting orig_eax to -1 failed to trigger the restart check anyway. So this was never noticed as a regression of 64-bit debuggers vs 32-bit debuggers on the same 64-bit kernel. Signed-off-by: Roland McGrath <roland@redhat.com> [ Changed to just do the sign-extension unconditionally on x86-64, since orig_ax is always just a small integer and doesn't need the full 64-bit range ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 07 Mar, 2008 25 commits
-
-
Karsten Keil authored
This adds another Broadcom BCM2045 based device to the blacklist, with these settings the micro dongle works on my system. Signed-off-by: Karsten Keil <kkeil@suse.de> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vmLinus Torvalds authored
* 'slab-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/vm: slub: fix typo in Documentation/vm/slub.txt slab: NUMA slab allocator migration bugfix slub: Do not cross cacheline boundaries for very small objects slab - use angle brackets for include of kmalloc_sizes.h slab numa fallback logic: Do not pass unfiltered flags to page allocator slub statistics: Fix check for DEACTIVATE_REMOTE_FREES
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: update references to Documentation/ide/ide.txt (v2) ide: move ide.txt to Documentation/ide/ ide: fix buggy code in ide_register_hw() ide: fix enabling DMA on it821x in "smart" mode ide-cd: mark REQ_TYPE_ATA_PC write requests with REQ_RW flag
-
Randy Dunlap authored
Fix all references to Documentation/ide/ide.txt. Add/update ide/00-INDEX file. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Randy Dunlap authored
Cleanup some of Documentation directory: Move Documentation/ide.txt to the ide/ sub-directory. Fix trailing whitespace while there. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Peter Teoh authored
Relocating the index to come after finding the hwif pointer. Signed-off-by: Peter Teoh <htmldeveloper@gmail.com> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
ide_tune_dma() should return '1' if IDE_HFLAG_NO_SET_MODE host flag is set. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
On Thursday 06 March 2008, walt wrote: > For me, this commit causes the problem it's intended to fix: > > commit 9f10d9ee > Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> > Date: Tue Feb 26 21:50:35 2008 +0100 > > ide-cd: fix 'ireason' handling for REQ_TYPE_ATA_PC requests > > This fixes some hangs caused by not finishing the transfer before ending > the request and also makes use of 'ireason == 1' quirk for spurious IRQs. > > When I mount a CD there is a long delay, and I see this error message: > > hdc: ide_cd_check_ireason: wrong transfer direction! > cdrom: failed setting lba address space > hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest } > ide: failed opcode was: unknown > hdc: drive not ready for command > <repeated many times> > > When I revert this commit everything works properly again, including > CD burning. It turned out that REQ_TYPE_ATA_PC write requests were not marked as such (the previous commit assumed them to be). Reported-by: walt <w41ter@gmail.com> Tested-by: walt <w41ter@gmail.com> Reviewed-by: Borislav Petkov <petkovbb@googlemail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds authored
* 'hotfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Fix dentry revalidation for NFSv4 referrals and mountpoint crossings NFS: Fix the fsid revalidation in nfs_update_inode() SUNRPC: Fix a nfs4 over rdma transport oops NFS: Fix an f_mode/f_flags confusion in fs/nfs/write.c
-
Trond Myklebust authored
As long as the directory contents haven't changed, we should just let the path walk proceed to cross the mountpoint. Apart from being an optimisation in the case of 'nohide' mountpoint traversals, it also fixes an issue with referrals: referral inodes don't have valid filehandles, so calling nfs_revalidate_inode() on them is a bug. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
When we detect that we've crossed a mountpoint on the remote server, we must take care not to use that inode to revalidate the fsid on our current superblock. To do so, we label the inode as a remote mountpoint, and check for that in nfs_update_inode(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Tom Talpey authored
Prevent an RPC oops when freeing a dynamically allocated RDMA buffer, used in certain special-case large metadata operations. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: James Lentini <jlentini@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
O_SYNC is stored in filp->f_flags. Thanks to Al Viro for pointing out the bug. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Tilman Schmidt authored
The card state mutex was only initialized when a device was connected, but used during unload unconditionally, leading to an Oops if a driver was loaded and unloaded again without ever connecting a device. Fix this by initializing the mutex as soon as the structure is allocated. Also add a missing mutex unlock revealed in the same execution path. This fixes a possible Oops in 2.6.25-rc that was introduced by commit e468c048 ("Gigaset: permit module unload"). Thanks to Roland Kletzing for reporting this problem. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Tested-by: Roland Kletzing <devzero@web.de> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel: sched: don't allow rt_runtime_us to be zero for groups having rt tasks sched: rt-group: fixup schedulability constraints calculation sched: fix the wrong time slice value for SCHED_FIFO tasks sched: export task_nice sched: balance RT task resched only on runqueue sched: retain vruntime
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86-boot: don't request VBE2 information x86: re-add reboot fixups x86: fix typo in step.c x86: fix merge mistake in i387.c x86: clear DF before calling signal handler
-
Ingo Molnar authored
randconfig testing found a bootup lockup in drivers/char/esp.c because of a spinlock that wasn't correctly initialized. I'm not sure why it became more prominent in 2.6.25-rc4, the bug seems rather old and i've been doing allyesconfig bootups for ages with CONFIG_ESP enabled. This fixes this bootup lockup: PM: Adding info for No Bus:ttyP63 ttyP32 at 0x0240 (irq = 0) is an ESP primary port BUG: spinlock lockup on CPU#0, swapper/1, f56dd004 Pid: 1, comm: swapper Not tainted 2.6.25-rc4-sched-devel.git-x86-latest.git #402 [<c03ac6f4>] _raw_spin_lock+0x134/0x140 [<c08649be>] _spin_lock_irqsave+0x5e/0x80 [<c0b9fbfe>] ? espserial_init+0x2be/0x6e0 [<c0b9fbfe>] espserial_init+0x2be/0x6e0 [<c0b877a3>] kernel_init+0x83/0x260 [<c0b9f940>] ? espserial_init+0x0/0x6e0 [<c010416a>] ? restore_nocheck_notrace+0x0/0xe [<c0b87720>] ? kernel_init+0x0/0x260 [<c0b87720>] ? kernel_init+0x0/0x260 [<c0104507>] kernel_thread_helper+0x7/0x10 ======================= kzalloc() is not the way to initialize spinlocks anymore. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dhaval Giani authored
This patch checks if we can set the rt_runtime_us to 0. If there is a realtime task in the group, we don't want to set the rt_runtime_us as 0 or bad things will happen. (that task wont get any CPU time despite being TASK_RUNNNG) Signed-off-by: Dhaval Giani <dhaval@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Peter Zijlstra authored
it was only possible to configure the rt-group scheduling parameters beyond the default value in a very small range. that's because div64_64() has a different calling convention than do_div() :/ fix a few untidies while we are here; sysctl_sched_rt_period may overflow due to that multiplication, so cast to u64 first. Also that RUNTIME_INF juggling makes little sense although its an effective NOP. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Miao Xie authored
Function sys_sched_rr_get_interval returns wrong time slice value for SCHED_FIFO tasks. The time slice for SCHED_FIFO tasks should be 0. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Pavel Roskin authored
The API is trivial, and so is the implementation. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Steven Rostedt authored
Sripathi Kodi reported a crash in the -rt kernel: https://bugzilla.redhat.com/show_bug.cgi?id=435674 this is due to a place that can reschedule a task without holding the tasks runqueue lock. This was caused by the RT balancing code that pulls RT tasks to the current run queue and will reschedule the current task. There's a slight chance that the pulling of the RT tasks will release the current runqueue's lock and retake it (in the double_lock_balance). During this time that the runqueue is released, the current task can migrate to another runqueue. In the prio_changed_rt code, after the pull, if the current task is of lesser priority than one of the RT tasks pulled, resched_task is called on the current task. If the current task had migrated in that small window, resched_task will be called without holding the runqueue lock for the runqueue that the task is on. This race condition also exists in the mainline kernel and this patch adds a check to make sure the task hasn't migrated before calling resched_task. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Tested-by: Sripathi Kodi <sripathik@in.ibm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Peter Zijlstra authored
Kei Tokunaga reported an interactivity problem when moving tasks between control groups. Tasks would retain their old vruntime when moved between groups, this can cause funny lags. Re-set the vruntime on group move to fit within the new tree. Reported-by: Kei Tokunaga <tokunaga.keiich@jp.fujitsu.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Peter Korsgaard authored
The new x86 setup code (4fd06960) broke booting on an old P3/500MHz with an onboard Voodoo3 of mine. After debugging it, it turned out to be caused by the fact that the vesa probing now asks for VBE2 data. Disassembing the video BIOS shows that it overflows the vesa_general_info structure when VBE2 data is requested because the source addresses for the information strings which get strcpy'ed to the buffer lie outside the 32K BIOS code (and hence contain long sequences of 0xff's). E.G.: get_vbe_controller_info: 00002A9C 60 pushaw 00002A9D 1E push ds 00002A9E 0E push cs 00002A9F 1F pop ds 00002AA0 2BC9 sub cx,cx 00002AA2 6626813D56424532 cmp dword [es:di],0x32454256 ; "VBE2" 00002AAA 7501 jnz .1 00002AAC 41 inc cx .1: 00002AAD 51 push cx 00002AAE B91400 mov cx,0x14 00002AB1 BED47F mov si, controller_header 00002AB4 57 push di 00002AB5 F3A4 rep movsb ; copy vbe1.2 header 00002AB7 B9EC00 mov cx,0xec 00002ABA 2AC0 sub al,al 00002ABC F3AA rep stosb ; zero pad remainder 00002ABE 5F pop di 00002ABF E8EB0D call word get_memory 00002AC2 C1E002 shl ax,0x2 00002AC5 26894512 mov [es:di+0x12],ax ; total memory 00002AC9 26C745040003 mov word [es:di+0x4],0x300 ; VBE version 00002ACF 268C4D08 mov [es:di+0x8],cs 00002AD3 268C4D10 mov [es:di+0x10],cs 00002AD7 59 pop cx 00002AD8 E361 jcxz .done ; VBE2 requested? 00002ADA 8D9D0001 lea bx,[di+0x100] 00002ADE 53 push bx 00002ADF 87DF xchg bx,di ; di now points to 2nd half 00002AE1 26C747140001 mov word [es:bx+0x14],0x100 ; sw rev 00002AE7 26897F06 mov [es:bx+0x6],di ; oem string 00002AEB 268C4708 mov [es:bx+0x8],es 00002AEF BE5280 mov si,0x8052 ; oem string 00002AF2 E87A1B call word strcpy 00002AF5 26897F0E mov [es:bx+0xe],di ; video mode list 00002AF9 268C4710 mov [es:bx+0x10],es 00002AFD B91E00 mov cx,0x1e 00002B00 BEE87F mov si,vidmodes 00002B03 F3A5 rep movsw 00002B05 26897F16 mov [es:bx+0x16],di ; oem vendor 00002B09 268C4718 mov [es:bx+0x18],es 00002B0D BE2480 mov si,0x8024 ; oem vendor 00002B10 E85C1B call word strcpy 00002B13 26897F1A mov [es:bx+0x1a],di ; oem product 00002B17 268C471C mov [es:bx+0x1c],es 00002B1B BE3880 mov si,0x8038 ; oem product 00002B1E E84E1B call word strcpy 00002B21 26897F1E mov [es:bx+0x1e],di ; oem product rev 00002B25 268C4720 mov [es:bx+0x20],es 00002B29 BE4580 mov si,0x8045 ; oem product rev 00002B2C E8401B call word strcpy 00002B2F 58 pop ax 00002B30 B90001 mov cx,0x100 00002B33 2BCF sub cx,di 00002B35 03C8 add cx,ax 00002B37 2AC0 sub al,al 00002B39 F3AA rep stosb ; zero pad .done: 00002B3B 1F pop ds 00002B3C 61 popaw 00002B3D B84F00 mov ax,0x4f 00002B40 C3 ret (The full BIOS can be found at http://peter.korsgaard.com/vgabios.bin if interested). The old setup code didn't ask for VBE2 info, and the new code doesn't actually do anything with the extra information, so the fix is to simply not request it. Other BIOS'es might have the same problem. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Jan Beulich noticed that the reboot fixups went missing during reboot.c unification. (commit 4d022e35) Geode and a few other rare boards with special reboot quirks are affected. Reported-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-