When profile= is used, a large buffer is allocated early at boot.  This
can be larger than what the page allocator can provide so it prints a
warning.  However, the caller is able to handle the situation so this
patch suppresses the warning.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The page allocator warns once when an order >= MAX_ORDER is specified.
This is to catch callers of the allocator that are always falling back to
their worst-case when it was not expected.  However, there are cases where
the caller is behaving correctly but cannot suppress the warning.  This
patch allows the warning to be suppressed by the callers by specifying
__GFP_NOWARN.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After commit ec64f515 ("cgroup: fix
frequent -EBUSY at rmdir"), cgroup's rmdir (especially against memcg)
doesn't return -EBUSY by temporary ref counts.  That commit expects all
refs after pre_destroy() is temporary but...it wasn't.  Then, rmdir can
wait permanently.  This patch tries to fix that and change followings.

 - set CGRP_WAIT_ON_RMDIR flag before pre_destroy().
 - clear CGRP_WAIT_ON_RMDIR flag when the subsys finds racy case.
   if there are sleeping ones, wakes them up.
 - rmdir() sleeps only when CGRP_WAIT_ON_RMDIR flag is set.
Tested-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reported-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: Paul Menage <menage@google.com>
Acked-by: Balbir Sigh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Under certain circumstances msleep(1) within the loop, which waits for the
EEPROM to be finished, might take longer than the timeout.  On the next
loop the status register might now return to be ready and therefore the
loop finishes.  The following check now tests if a timeout occurred and if
so returns an error although the device reported it was ready.

This fix replaces testing the occurrence of the timeout by testing the
"not ready" bit in the status register.
Signed-off-by: Sebastian Heutling <heutling@who-ing.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The bug was introduced by commit cc31edce
("cgroups: convert tasks file to use a seq_file with shared pid array").

We cache a pid array for all threads that are opening the same "tasks"
file, but the pids in the array are always from the namespace of the
last process that opened the file, so all other threads will read pids
from that namespace instead of their own namespaces.

To fix it, we maintain a list of pid arrays, which is keyed by pid_ns.
The list will be of length 1 at most time.
Reported-by: Paul Menage <menage@google.com>
Idea-by: Paul Menage <menage@google.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: Serge Hallyn <serue@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The generic atomic64_t implementation in lib/ did not export the functions
it defined, which means that modules that use atomic64_t would not link on
platforms (such as 32-bit powerpc).  For example, trying to build a kernel
with CONFIG_NET_RDS on such a platform would fail with:

    ERROR: "atomic64_read" [net/rds/rds.ko] undefined!
    ERROR: "atomic64_set" [net/rds/rds.ko] undefined!

Fix this by exporting the atomic64_t functions to modules.  (I export the
entire API even if it's not all currently used by in-tree modules to avoid
having to continue fixing this in dribs and drabs)
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As reported in Red Hat bz #509671, i_blocks for files on hugetlbfs get
accounting wrong when doing something like:

   $ > foo
   $ date  > foo
   date: write error: Invalid argument
   $ /usr/bin/stat foo
     File: `foo'
     Size: 0          Blocks: 18446744073709547520 IO Block: 2097152 regular
...

This is because hugetlb_unreserve_pages() is unconditionally removing
blocks_per_huge_page(h) on each call rather than using the freed amount.
If there were 0 blocks, it goes negative, resulting in the above.

This is a regression from commit a5516438
("hugetlb: modular state for hugetlb page size")

which did:

-	inode->i_blocks -= BLOCKS_PER_HUGEPAGE * freed;
+	inode->i_blocks -= blocks_per_huge_page(h);

so just put back the freed multiplier, and it's all happy again.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Andi Kleen <andi@firstfloor.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-cmos has two drivers, one PNP and one platform.  When PNP has not
succeeded probing, platform is registered.  However, it tries to
unregister both drivers unconditionally, instead of only unregistering
those that were successfully registered.  This causes runtime warnings to
be emitted from the driver core code.

Fix this with a boolean variable for each driver indicating whether
registering was successful.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Brownell <david-b@pacbell.net>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Greg KH <greg@kroah.com>
Cc: Ozan Caglayan <ozan@pardus.org.tr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When data is read through DMA, the last element must be read separately
through the RX register.  It cannot be transferred by the DMA.  For
further details see e.g.  OMAP35x TRM (table 19-16).

Without the fix the driver causes extra clocks to be clocked to the bus
after DMA RX operations.  This can cause interesting behaviour with some
devices.
Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
[aaro.koskinen@nokia.com: Simplified the patch while keeping the idea.]
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently mcspi wake-ups are not enabled.  This might cause cases where
OMAP is not waking up on mcspi events.
Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixed off-by-one bug in loop indexes - some elements beyond windows' array
were accessed, which might result in memory access violations when
removing/suspending the device.
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Intel X38 MCHBAR is a 64bits register, base from 0x48, so its higher base
is 0x4C.
Signed-off-by: Lu Zhihe <tombowfly@gmail.com>
Signed-off-by: Doug Thompson <dougthompson@xmission.com>
Cc: <stable@kernel.org>		[2.6.30.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Setting
 "crashkernel=512M-2G:64M,2G-:128M"
does not work but it turns to work if it has a trailing-whitespace,
like
 "crashkernel=512M-2G:64M,2G-:128M ".

It was because of a bug in the parser, running over the cmdline.

This patch adds a check of the termination.
Reported-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Tested-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix a post-2.6.31 regression which was introduced by
2ff05b2b ("oom: move oom_adj value from
task_struct to mm_struct").

After moving the oom_adj value from the task struct to the mm_struct, the
oom_adj value was no longer properly inherited by child processes.

Copying over the oom_adj value at fork time fixes that bug.

[kosaki.motohiro@jp.fujitsu.com: test for current->mm before dereferencing it]
Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Paul Menage <manage@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If a task is oom killed and still cannot find memory when trying with
no watermarks, it's better to fail the allocation attempt than to loop
endlessly.  Direct reclaim has already failed and the oom killer will
be a no-op since current has yet to die, so there is no other
alternative for allocations that are not __GFP_NOFAIL.
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix a post-2.6.24 performace regression caused by
3dfa5721 ("page-allocator: preserve PFN
ordering when __GFP_COLD is set").

Narayanan reports "The regression is around 15%.  There is no disk controller
as our setup is based on Samsung OneNAND used as a memory mapped device on a
OMAP2430 based board."

The page allocator tries to preserve contiguous PFN ordering when returning
pages such that repeated callers to the allocator have a strong chance of
getting physically contiguous pages, particularly when external fragmentation
is low.  However, of the bulk of the allocations have __GFP_COLD set as they
are due to aio_read() for example, then the PFNs are in reverse PFN order.
This can cause performance degration when used with IO controllers that could
have merged the requests.

This patch attempts to preserve the contiguous ordering of PFNs for users of
__GFP_COLD.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reported-by: Narayananu Gopalakrishnan <narayanan.g@samsung.com>
Tested-by: Narayanan Gopalakrishnan <narayanan.g@samsung.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A 32-bit perl can't handle 64-bit addresses without using the BigInt
package.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Objects passed to kmemleak_seq_next() have an incremented reference
count (hence not freed) but they may point via object_list.next to
other freed objects. To avoid this, the whole start/next/stop sequence
must be protected by rcu_read_lock().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'drm-radeon-kms' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (35 commits)
  drm/radeon: set fb aperture sizes for framebuffer handoff.
  drm/ttm: fix highuser vs dma32 confusion.
  drm/radeon: Fix size used for benchmarking BO copies.
  drm/radeon: Add radeon.test parameter for running BO GPU copy tests.
  drm/radeon/kms: allow interruptible waits for objects.
  drm/ttm: powerpc: Fix Highmem cache flushing.
  x86: Export kmap_atomic_prot() needed for TTM.
  drm/ttm: Fix ttm in-kernel copying of pages with non-standard caching attributes.
  drm/ttm: Fix an oops and sync object leak.
  drm/radeon/kms: vram sizing on certain r100 chips needs workaround.
  drm/radeon: Pay more attention to object placement requested by userspace.
  drm/radeon: Fall back to evicting BOs with memcpy if necessary.
  drm/radeon: Don't unreserve twice on failure to validate.
  drm/radeon/kms: fix bandwidth computation on avivo hardware
  drm/radeon/kms: add initial colortiling support.
  drm/radeon/kms: fix hotspot handling on pre-avivo chips
  drm/radeon/kms: enable frac fb divs on rs600/rs690/rs740
  drm/radeon/kms: add PLL flag to prefer frequencies <= the target freq
  drm/radeon/kms: block RN50 from using 3D engine.
  drm/radeon/kms: fix VRAM sizing like DDX does it.
  ...

* 'zero-length' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  Remove zero-length file drivers/char/vr41xx_giu.c

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: accept late unlocking of HPA
  libata: Updates and fixes for pata_at91 driver
  ata_piix: Add new short cable ID
  ata_piix: Add new laptop short cable IDs
  ahci: add device IDs for Ibex Peak ahci controllers
  libata: remove superfluous NULL pointer checks
  libata: add missing NULL pointer check to ata_eh_reset()
  pata_pcmcia: add CNF-CDROM-ID

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  driver core: documentation: make it clear that sysfs is optional
  driver core: sysdev: do not send KOBJ_ADD uevent if kobject_init_and_add fails
  Dynamic debug: fix typo: -/->
  driver core: firmware_class:fix memory leak of page pointers array
  sysfs: fix hardlink count on device_move

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  staging: udlfb: Add vmalloc.h include
  staging: remove aten2011 driver
  Staging: android: lowmemorykiller.c: fix it for "oom: move oom_adj value from task_struct to mm_struct"
  Staging: serqt_usb2: fix memory leak in error case
  Staging: serqt_usb2: add missing calls to tty_kref_put()

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (34 commits)
  USB: xhci: Stall handling bug fixes.
  USB: xhci: Support for 64-byte contexts
  USB: xhci: Always align output device contexts to 64 bytes.
  USB: xhci: Scratchpad buffer allocation
  USB: Fix parsing of SuperSpeed Endpoint Companion descriptor.
  USB: xhci: Fail gracefully if there's no SS ep companion descriptor.
  USB: xhci: Handle babble errors on transfers.
  USB: xhci: Setup HW retries correctly.
  USB: xhci: Check if the host controller died in IRQ handler.
  USB: xhci: Don't oops if the host doesn't halt.
  USB: xhci: Make debugging more verbose.
  USB: xhci: Correct Event Handler Busy flag usage.
  USB: xhci: Handle short control packets correctly.
  USB: xhci: Represent 64-bit addresses with one u64.
  USB: xhci: Use GFP_ATOMIC while holding spinlocks.
  USB: xhci: Deal with stalled endpoints.
  USB: xhci: Set TD size in transfer TRB.
  USB: xhci: fix less- and greater than confusion
  USB: usbtest: no need for USB_DEVICEFS
  USB: musb: fix CONFIGDATA register read issue
  ...

We really don't want to mark the pty as a low-latency device, because as
Alan points out, the ->write method can be called from an IRQ (ppp?),
and that means we can't use ->low_latency=1 as we take mutexes in the
low_latency case.

So rather than using low_latency to force the written data to be pushed
to the ldisc handling at 'write()' time, just make the reader side (or
the poll function) do the flush when it checks whether there is data to
be had.

This also fixes the problem with lost data in an emacs compile buffer
(bugzilla 13815), and we can thus revert the low_latency pty hack
(commit 3a542974: "pty: quickfix for the
pty ENXIO timing problems").
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
[ Modified to do the tty_flush_to_ldisc() inside input_available_p() so
  that it triggers for both read and poll()  - Linus]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This will allow efi/vesa to handoff to radeon.
Signed-off-by: Dave Airlie <airlied@redhat.com>

DMA32 and highmem are sort of exclusive.

Noticed by AndrewR on #radeon.
Signed-off-by: Dave Airlie <airlied@redhat.com>

The incorrect size caused benchmark results to be inflated by a factor of 4.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

If enabled, during initialization BO GTT->VRAM and VRAM->GTT GPU copies are
tested across the whole GTT aperture.

This has helped uncover the benchmark copy size bug and verify the maximum
aperture size supported by the AGP bridge in my PowerBook.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Blocking here isn't something the X server mouse appreciates,
avoid the block and let userspace retry the waits.

libdrm_radeon userspace library is also expecting EBUSY not ERESTART
Signed-off-by: Dave Airlie <airlied@redhat.com>

Temporarily maps highmem pages while flushing to get a valid virtual
address to flush.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This functionality is needed to kmap_atomic() highmem pages that may
potentially have or are about to set up other mappings with
non-standard caching attributes.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

For x86 this affected highmem pages only, since they were always kmapped
cache-coherent, and this is fixed using kmap_atomic_prot().

For other architectures that may not modify the linear kernel map we
resort to vmap() for now, since kmap_atomic_prot() generally uses the
linear kernel map for lowmem pages. This of course comes with a
performance impact and should be optimized when possible.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The code was potentially dereferencig a NULL sync object pointer.
At the same time a sync object reference was potentially leaked.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

If an rn50/r100/m6/m7 GPU has < 64MB RAM, i.e. 8/16/32, the
aperture used to calculate the MC_FB_LOCATION needs to be worked
out from the CONFIG_APER_SIZE register, and not the actual vram size.

TTM VRAM size was also being initialised wrong, use actual vram size
to initialise it.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Previously we were basically always setting the GTT and VRAM flags regardless of
what userspace requested.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Otherwise if there's no GTT space we would fail the eviction, leading to
cascaded failure.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This is done later in radeon_object_list_unvalidate(). Doing it twice triggers
a BUG in TTM, rendering X on KMS unusable until reboot.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Fix bandwidth computation and crtc priority in memory controller
so that crtc memory request are fullfill in time to avoid display
artifact.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>