Force fb_var_screeninfo color format on all Blackfin Framebuffer Drivers.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A number of drivers in drivers/gpio return -ENODEV when confronted with
missing setup parameters such as the platform data.  However, returning
-ENODEV causes the driver layer to silently ignore the driver as it
assumes the probe did not find anything and was only speculative.

To make life easier to discern why a driver is not being attached, change
to returning -EINVAL, which is a better description of the fact that the
driver data was not valid.

Also add a set of dev_dbg() statements to the error paths to provide an
better explanation of the error as there may be more that one point in the
driver.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For some reason I have to slowdown clock to touchscreen device.

In atmel_spi_setup() there is comment that max_speed_hz == 0 means as slow
as possible and divider is set to maximum value.  But in
atmel_spi_transfer() function is check against not zero max_speed_hz with
EINVAL returned.

Probably driver should setup divider for each transfer based on
transfer->speed_hz value, but I think that would be not necessary overhead
as all used devices have constant clock.

Below patch works fine for me.
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix the following problem, related to hardware flow control (CTS/RTS):
Transmitting while CTS line is asserted in DMA mode, due to not checking
for tx-stopped condition.

We found these problems while testing the UARTs with hardware
flow-control.
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: "Andrew Victor" <avictor.za@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update Documentation/sysctl/vm.txt and Documentation/filesystems/proc.txt.
 More specifically, the section on /proc/sys/vm in
Documentation/filesystems/proc.txt was removed and a link to
Documentation/sysctl/vm.txt added.

Most of the verbiage from proc.txt was simply moved in vm.txt, with new
addtional text for "swappiness" and "stat_interval".
Signed-off-by: Peter W Morreale <pmorreale@novell.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 58dab916, which
makes my Nehalem come to a nasty crawling almost-halt.  It looks like it
turns off caching of regular kernel RAM, with the understandable
slowdown of a few orders of magnitude as a result.
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] SN specific version of dma_get_required_mask()
  [IA64] generic_defconfig: Enable SATA_VITESSE
  [IA64] dump stack on kernel unaligned warnings
  [IA64] Turn on CONFIG_HAVE_UNSTABLE_CLOCK
  [IA64] Update to use account_{steal,idle}_ticks

Update employer's care-of address in CREDITS file, and remove references
to some _very_ old stuff I'd forgotten I'd ever done.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix invalid amp value for STAC925x
  ASoC: Fix the power update function for snd_soc_dapm_value_mux
  sound: virtuoso: do not overwrite EEPROM on Xonar D2/D2X
  ALSA: hda - Fix HP dv5 mic input
  ALSA: hda - Fix missing initialization of NID 0x0e for STAC925x
  ALSA: USB quirk for Logitech Quickcam Pro 9000 name
  ALSA: hda - Fix stac92hd83xxx_amp_nids[]
  ALSA: hda - Add automatic model setting for Samsung Q45
  ALSA: hda - Don't reset HP pinctl in patch_sigmatel.c
  ALSA: hda: stac92hd8xxx amp mixers
  ALSA: hda - Fix silent headphone output on Panasonic CF-74
  ALSA: hda - Update model descriptions in patch_sigmatel.c
  ALSA: hda - Use queue_delayed_work()
  ALSA: hda - Add quirk for another HP dv5
  ALSA: hda - Add support of NVidia MCP78 HDMI
  ALSA: hda - Fix a typo
  ALSA: hda - More fixes on Gateway entries
  ALSA: patch_sigmatel: Add missing Gateway entries and autodetection
  ALSA: hda - Add a new function to seek for a codec ID

This patch is for Alan Cox as it related to the tty layer.
Hopefully the hso driver is again relatively stable with this fix.
Signed-off-by: Denis Joseph Barrow <D.Barow@option.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The HSO changes for kref introduced a recursive spinlock take. All
functions which call put_rxbuf_data already have serial->serial_lock
grabbed.

[Comment to code added-AC]
Signed-off-by: Denis Joseph Barrow <D.Barrow@option.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 4a90f09b added kref stuff to
ftdi_sio, but missed tty_kref_put at one exit point in
ftdi_process_read.
Signed-off-by: Jim Paris <jim@jtan.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This was not implemented correctly for the pnx8xxx_uart driver.

[From further discussion:
Correct, you can look to it as two separate bugs:
a) the next character is not ignored while it should;
b) the status bits 31-8 are copied to the 'ch' variable while they shouldn't.

Both bugs prevent correct break signal handling (and therefore correct
behaviour of the magic SysRq key). Bug b didn't cause too much trouble
earlier because in most situations the status bits are all zero; for
this case they unfortunately aren't.
]
Signed-off-by: Mischa Jonker <mischa.jonker@nxp.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add SupraExpress 336i PnP Voice Modem

Tested and working with the following device: (output from lspnp -v)
01:01.00 SUP1381 (unknown)
    state = active
	io 0x2f8-0x2ff
	irq 3
Signed-off-by: Daniel Gagnon <daniel.gagnon@yahoo.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Most of netmos 9835 hardware is handled by parport-serial.  IBM introduces
a device which doesn't have any parallel ports and have screwed subdevice
PCI id (not corresponding to port numbers).

Handle this device (9710:9835 1014:0299) properly.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If you issue an ioctl to flush a tty as the line discipline is changing or
otherwise unplugged you can get a crash. The bug is very old but the rest
of the BKL lock dropping and some very "good" luck on Ingo's part caught
an example.

Use the correct ldisc_ref form so that we wait for the ldisc change to
complete and then flush
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Create a platform specific version of dma_get_required_mask()
for ia64 SN Altix. All SN Altix platforms support 64 bit DMA
addressing regardless of the size of system memory.
Create an ia64 machvec for dma_get_required_mask, with the
SN version unconditionally returning DMA_64BIT_MASK.
Signed-off-by: John Keller <jpk@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

CONFIG_SATA_VITESSE=y was not added to generic_defconfig when
sn2_defconfig was removed.  SGI Altix systems that use an IO10
base IO card to drive the root device are unable to boot without
the Vitesse controller.
Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Often the cause of kernel unaligned access warnings is not
obvious from just the ip displayed in the warning.  This adds
the option via proc to dump the stack in addition to the warning.
The default is off (just display the 1 line warning).  To enable
the stack to be shown: echo 1 > /proc/sys/kernel/unaligned-dump-stack
Signed-off-by: Doug Chapman <doug.chapman@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

sched_clock() on ia64 is based on ar.itc, so is never
completely synchronized between cpus. On some platforms
(e.g. certain models of SGI Altix) it may be running at
radically different frequencies.

Based on a patch from Dimitri Sivanich which set this
just for SN2 && GENERIC kernels ... it is needed for
all ia64 machines.
Signed-off-by: Tony Luck <tony.luck@intel.com>

This patch fixes the following errors caused by
79741dd3 which changed
the prototypes of account_steal_time() and account_idle_time().

>   CC      arch/ia64/xen/time.o
> arch/ia64/xen/time.c: In function 'consider_steal_time':
> arch/ia64/xen/time.c:132: warning: passing argument 1 of 'account_steal_time' makes integer from pointer without a cast
> arch/ia64/xen/time.c:132: error: too many arguments to function 'account_steal_time'
> arch/ia64/xen/time.c:133: warning: passing argument 1 of 'account_steal_time' makes integer from pointer without a cast
> arch/ia64/xen/time.c:133: error: too many arguments to function 'account_steal_time'

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>

The value set in the commit 2465fb66
is actually wrong.  The value range is from 0 to 0x1f while the patch
sets to 0x7f.  Let's fix it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Modify the check for the mux type to also handle the
snd_soc_dapm_value_mux type in a same way as the snd_soc_dapm_mux.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

On the Asus Xonar D2 and D2X models, the SPI chip select signal for the
fourth DAC shares its pin with the serial clock for the EEPROM that
contains the PCI subdevice ID values.  It appears that when DAC
registers are written and some other unknown conditions occur (probably
noise on the EEPROM's chip select line), the EEPROM gets overwritten
with garbage, which makes it impossible to properly detect the card
later.

Therefore, we better avoid DAC register writes and make sure that the
driver works with the DAC's registers' default values.  Consequently,
the sample format is now I2S instead of left-justified (no user-visible
change), and the DAC's volume/mute registers cannot be used anymore
(volume changes are now done by the software volume plugin).
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (29 commits)
  powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/
  powerpc/83xx: Make serial ports work on MPC8315E-RDB w/ FSL U-Boots
  powerpc/e500mc: Doorbells need to be taken w/exceptions disabled
  powerpc: Enable PS3 options and QPACE in ppc64_defconfig
  powerpc/powermac: Fix occasional SMP boot failure
  powerpc/cacheinfo: Rename cache_dir per-cpu variable
  hvc_console: Use kzalloc() instead of kmalloc() + memset()
  hvc_console: Do not set low_latency when using interrupts
  hvc_console: Call free_irq() only if request_irq() was successful
  hvc_console: Change an mb() to smp_mb() and add some comments
  powerpc: Cleanup from l64 to ll64 change: drivers/net
  powerpc: Cleanup from l64 to ll64 change: drivers/char
  powerpc: Cleanup from l64 to ll64 change: arch code
  powerpc: Change u64/s64 to a long long integer type
  powerpc/kexec: Check crash_base for relocatable kernel
  powerpc: Make dummy section a valid note header
  Xilinx: SPI: updated driver for device tree
  drivers/of: Add the of_find_i2c_device_by_node function.
  powerpc/xsysace: add compatible string for non-ipcore instance
  powerpc/mpc52xx: remove dead code from GPIO driver
  ...

* 'syscalls' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (44 commits)
  [CVE-2009-0029] s390 specific system call wrappers
  [CVE-2009-0029] System call wrappers part 33
  [CVE-2009-0029] System call wrappers part 32
  [CVE-2009-0029] System call wrappers part 31
  [CVE-2009-0029] System call wrappers part 30
  [CVE-2009-0029] System call wrappers part 29
  [CVE-2009-0029] System call wrappers part 28
  [CVE-2009-0029] System call wrappers part 27
  [CVE-2009-0029] System call wrappers part 26
  [CVE-2009-0029] System call wrappers part 25
  [CVE-2009-0029] System call wrappers part 24
  [CVE-2009-0029] System call wrappers part 23
  [CVE-2009-0029] System call wrappers part 22
  [CVE-2009-0029] System call wrappers part 21
  [CVE-2009-0029] System call wrappers part 20
  [CVE-2009-0029] System call wrappers part 19
  [CVE-2009-0029] System call wrappers part 18
  [CVE-2009-0029] System call wrappers part 17
  [CVE-2009-0029] System call wrappers part 16
  [CVE-2009-0029] System call wrappers part 15
  ...

Add swab.h to kbuild.asm and remove the individual entries from
each arch, mark as unifdef as some arches have some kernel-only
bits inside.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Adjust the arch overrides to the new names as well.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  [XFS] Update maintainers
  [XFS] use scalable vmap API
  [XFS] remove old vmap cache
  [XFS] make xfs_ino_t an unsigned long long
  [XFS] truncate readdir offsets to signed 32 bit values
  [XFS] fix compile of xfs_btree_readahead_lblock on m68k
  [XFS] Remove macro-to-function indirections in the mask code
  [XFS] Remove macro-to-function indirections in attr code
  [XFS] Remove several unused typedefs.
  [XFS] pass XFS_IGET_BULKSTAT to xfs_iget for handle operations

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  IDE: fix sparse signed-ness errors with host->host_busy
  ide: fix suspend regression
  tx4938ide: Fix build error due to read_sff_dma_status moving
  ide: remove unused CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
  sl82c105: remove dead code
  via82cxxx: fix cable warning message
  ide: can't use SSD/non-rotational queue flag for all CFA devices
  it821x.c: use dev->revision instead of pci_read_config_byte
  it821x: Add ultra_mask quirk for Vortex86SX
  ide: fix accidental LOCKDEP breakage caused by local_irq_set() removal

Fix HP dv5 (103c:3603) built-in mic input.

Reference: kernel bug 12440
	http://bugzilla.kernel.org/show_bug.cgi?id=12440Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@kernel.org

The host_busy field in struct ide_host defaults to a
signed-long, where most arch's test_and_set_bit_*
macros use an unsigned long.

Change to using an unsigned long, which on ARM removes
the following sparse errors:

drivers/ide/ide-io.c:681:8: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:681:8:    expected unsigned long volatile *p
drivers/ide/ide-io.c:681:8:    got long volatile *<noident>
drivers/ide/ide-io.c:681:8: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:681:8:    expected unsigned long volatile *p
drivers/ide/ide-io.c:681:8:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

On Monday 12 January 2009, Simon Holm Thøgersen wrote:
> commit 295f0004 ("ide: don't execute the next queued command from the
> hard-IRQ context (v2)") breaks suspend to disk for me. On
> 'echo disk > /sys/power/state' the systems hangs, letting me switch
> virtual consoles, but not responding to Alt+SysRq

Restart the request queue early for REQ_TYPE_PM_RESUME requests
(though there is only one resume request for the whole resume
sequence it stays in the queue until is fully completed and now
depends on kblockd for processing consequential resume states).
Reported-and-bisected-by: Simon Holm Thøgersen <odie@cs.aau.dk>
Tested-by: Simon Holm Thøgersen <odie@cs.aau.dk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>