- 10 Nov, 2008 2 commits
-
-
Hugo Villeneuve authored
The TI DVEVM board uses the SND_SOC_DAIFMT_CBM_CFM & I2S formats, but the Lyrtech SFFSDR board uses the SND_SOC_DAIFMT_CBM_CFS & RIGHT-JUSTIFIED formats. Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Christian Pellegrin authored
fixes playing/recording of 8 bit audio files. Generated on 20081108 against v2.6.27 Signed-off-by: Christian Pellegrin <chripell@fsfe.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 07 Nov, 2008 1 commit
-
-
Troy Kisky authored
Add support for more sample rates, different crystals and split playback/capture rates. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Arun KS <arunks@mistralsolutions.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 Nov, 2008 1 commit
-
-
Grazvydas Ignotas authored
According to TRM, 256*Fs clock output should be enabled when TWL4030 is in slave mode, not master. This allows sound to work on OMAP3 Pandora, which uses 256*Fs clock. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 05 Nov, 2008 3 commits
-
-
David Anders authored
The S3C24xx dma does not allow more than one buffer to be enqueue prior to the dma transfers starting. This patch adds an additional parameter to s3c24xx_pcm_enqueue() to allow for passing an initial dma maximum load value. Signed-off-by: David Anders <danders at amltd.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Rather than try to remember to keep the core version number updated (which hasn't been happening) just remove it. It was much more useful when ASoC was out of tree. Signed-off-by: Mark brown <broonie@opensource.wolfsonmicro.com>
-
Marek Vasut authored
this patch adds asoc audio driver for pxa27x based Palm PDAs. I tested it for palmtx, t5 and ld, it should work with palmz72 as well (slapin, please test). I sent it here some time ago, but now I got to fixing bugs in it. It should be somehow mostly ok and ready for applying. [Converted to use snd_soc_dapm_nc_pin() and bool Kconfig -- broonie] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 Nov, 2008 3 commits
-
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Huang Weiyi authored
The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. sound/soc/codecs/ad73311.c This patch removes the said #include <version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Troy Kisky authored
Call device_create_file only once in snd_soc_dapm_sys_add function. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 31 Oct, 2008 8 commits
-
-
Takashi Iwai authored
-
Takashi Iwai authored
-
Sedji Gaouaou authored
Add audio support for the Atmel AT91SAM9G20ek board(uing wolfson 8731). It is based on the former eti_b1_wm8731.c file, using the atmel scc API. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Sedji Gaouaou authored
The Ateml AT91 and AVR32 SoC share common IP for audio and can share the same driver code using the atmel-ssc API provided for both architectures. Do this, creating a new unified atmel ASoC architecture to replace the previous at32 and at91 ones. [This was contributed as a patch series for reviewability but has been squashed down to a single commit to help preserve both the history and bisectability. A small bugfix from Jukka is included.] Tested-by: Jukka Hynninen <ext-jukka.hynninen@vaisala.com> Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Steve Sakoman authored
Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Steve Sakoman authored
Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Steve Sakoman authored
Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Stephen Rothwell authored
sound/soc/soc-dapm.c: In function 'snd_soc_dapm_sys_add': sound/soc/soc-dapm.c:828: error: 'ret' undeclared (first use in this function) Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 30 Oct, 2008 12 commits
-
-
Takashi Iwai authored
The last change to Kconfig ca53fb24 added a wrong item SND_SOC_AC97, which must be SND_SOC_AC97_CODEC. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Timur Tabi authored
Disable the automatic volume control feature of the CS4270 audio codec. This feature, which is enabled by default, causes volume change commands to be delayed. Sometimes the volume change happens after playback is started. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Move the bus dependencies in SND_SOC_ALL_CODECS into the individual codec options rather than have them centrally. This allows the inclusion of AC97 codecs when testing on platforms with AC97 support and will also handle codecs on multi-function devices more gracefully. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
The WM9713 comes out of cold reset in low power mode so always requires a warm reset to bring up the AC97 link after a cold reset. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
The SSP ports PXA series processors can be used to implement a variety of audio interface formats. This patch implements support for I2S, DSP A and DSP B modes on these ports. This patch is based on the previous out of tree pxa2xx-ssp driver (which was originally written by Liam Girdwood with updates from Philipp Zabel and Nicola Perrino) and pxa3xx-ssp driver (originally written by Seth Forsee based on the pxa2xx-ssp driver). Testing coverage is not complete currently. Tested-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
As well as ensuring that UI-relevant parts of control names don't get truncated in the DAPM code this avoids conflicts in long control names that differ only at the end of a long string. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
Since we can query the playback stream power state directly we do not need to infer if it is powered up from the timer being scheduled. Doing this avoids problems that previously existed with streams being incorrectly determined to be powered up caused when the timer is scheduled when streams are closed after being partially set up. Reported-by: Nobin Mathew <nobin.mathew@gmail.com> Reported-by: Jukka Hynninen <ext-jukka.hynninen@vaisala.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Troy Kisky authored
i.e. echo 6 59 >/sys/kernel/debug/soc-audio.0/codec_reg will set register 0x06 to a value of 0x59. Also, pop_time debugfs interface setup is moved so that it is setup in the same function as codec_reg Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
-
Mark Brown authored
The control had an extra space at the end of the name. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Jon Smirl authored
Fix missing unsigned for irqsave flags in psc i2s driver Make attribute visiblity static Collect all sysfs errors before checking status [Word wrapped DEVICE_ATTR() lines for 80 columns -- broonie] Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Mark Brown authored
When ASoC was converted to support full int width masks SOC_SINGLE_VALUE() omitted the assignment of rshift, causing the control operatins to report some mono controls as stereo. This happened to work some of the time due to a confusion between shift and min in snd_soc_info_volsw(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 28 Oct, 2008 1 commit
-
-
Takashi Iwai authored
-
- 27 Oct, 2008 2 commits
-
-
Cliff Cai authored
- Setting the TFS pin selector for SPORT 0 based on whether the selected port id F or G. If the port is F then no conflict should exist for the TFS. When Port G is selected and EMAC then there is a conflict between the PHY interrupt line and TFS. Current settings prevent the conflict by ignoring the TFS pin when Port G is selected. This allows both ssm2602 using Port G and EMAC concurrently. - some code cleanup Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
-
- 26 Oct, 2008 7 commits
-
-
Linus Torvalds authored
.. fix all the worst problems in -rc1
-
Geert Uytterhoeven authored
If CONFIG_AMIGA_BUILTIN_SERIAL=m, I get the following warnings: | drivers/char/amiserial.c: At top level: | drivers/char/amiserial.c:2138: warning: data definition has no type or storage class | drivers/char/amiserial.c:2138: warning: type defaults to 'int' in declaration of 'console_initcall' | drivers/char/amiserial.c:2138: warning: parameter names (without types) in function declaration | drivers/char/amiserial.c:2134: warning: 'amiserial_console_init' defined but not used because console_initcall() is not defined (nor really sensible) in the modular case. So disable serial console support if the driver is modular. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Davide Libenzi authored
In commit f337b9c5 ("epoll: drop unnecessary test") Thomas found that there is an unnecessary (always true) test in ep_send_events(). The callback never inserts into ->rdllink while the send loop is performed, and also does the ~EP_PRIVATE_BITS test. Given we're holding the mutex during this time, the conditions tested inside the loop are always true. HOWEVER. The test "!ep_is_linked(&epi->rdllink)" wasn't there because we insert into ->rdllink, but because the send-events loop might terminate before the whole list is scanned (-EFAULT). In such cases, when the loop terminates early, and when a (leftover) file received an event while we're performing the lockless loop, we need such test to avoid to double insert the epoll items. The list_splice() done a few steps below, will correctly re-insert the ones that were left on "txlist". This should fix the kenrel.org bugzilla entry 11831. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Arjan van de Ven authored
Some userland apps seem to pass in a "0" for the seconds, and several seconds worth of usecs to select(). The old kernels accepted this just fine, so the new kernels must too. However, due to the upscaling of the microseconds to nanoseconds we had some cases where we got math overflow, and depending on the GCC version (due to inlining decisions) that actually resulted in an -EINVAL return. This patch fixes this by adding the excess microseconds to the seconds field. Also with thanks to Marcin Slusarz for spotting some implementation bugs in the diagnostics patches. Reported-by: Carlos R. Mafra <crmafra2@gmail.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Arjan van de Ven authored
The default for the regulatory compatibility option is wrong; if you picked the default you ended up with a non-functional wifi system (at least I did on Fedora 9 with iwl4965). I don't think even the October 2008 releases of the various distros has the new userland so clearly the default is wrong, and also we can't just go about deleting this in 2.6.29... Change the default to "y" and also adjust the config text a little to reflect this. This patch fixes regression #11859 With thanks to Johannes Berg for the diagnostics Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Rothwell authored
/scratch/sfr/next/kernel/cgroup.c: In function 'cgroup_tasks_start': /scratch/sfr/next/kernel/cgroup.c:2107: warning: unused variable 'i' Introduced in commit cc31edce "cgroups: convert tasks file to use a seq_file with shared pid array". Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: (abituguru3) enable DMI probing feature on AW9D-MAX hwmon: (abituguru3) Cosmetic whitespace fixes hwmon: (adt7473) Fix voltage conversion routines hwmon: (lm90) Add support for the LM99 16 degree offset hwmon: (lm90) Fix handling of hysteresis value hwmon-vid: Add support for AMD family 10h CPUs hwmon: (w83781d) Fix linking when built-in
-