- 12 Oct, 2007 40 commits
-
-
Matthew Wilcox authored
Move as much as possible outside the critical section in queuecommand, eg: - Set the scsi_done field before acquiring the lock - Call asc_scsi_done after dropping the lock Also remove a comment suggesting we should enable interrupts (now we do) and do some minor reformatting for readability. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Matthew Wilcox authored
The `active' list was used in the reset handler -- but the midlayer guarantees that list is empty by the time the reset handler is invoked. It was also checked in the interrupt routines to be sure that this command belonged to this board, but we don't need to check that either. We can then delete the asc_prt_target_stats() function as it will never print anything, along with asc_enqueue(), asc_dequeue_list(), asc_rmqueue(), asc_scsi_done_list(), struct asc_queue, ASC_QUEUE_EMPTY, ASC_TID_ALL, ASC_FRONT, ASC_BACK, and all the REQ* macros. Also remove this item from the todo list. Signed-off-by:
-
Matthew Wilcox authored
- Move the guts of asc_scsi_done_list() into a new function, asc_scsi_done. - Call asc_scsi_done() in asc_isr_callback() and adv_isr_callback(). The comment was wrong; scsi_done cannot enable interrupts. - All other places which queued an scp on the done list are error paths for queuecommand, and so we can just call asc_scsi_done() in queuecommand if we receive an error. - We no longer need to keep a list of done requests in advansys_interrupt Signed-off-by:
-
Matthew Wilcox authored
The midlayer guarantees it won't call ->queuecommand for a host which is handling a reset condition. Signed-off-by:
-
Matthew Wilcox authored
If the adapter is busy, return the request to the midlayer rather than queueing it in the driver. asc_execute_queue() and asc_dequeue() become unused, and we don't need to print out stats on the waiting queue any more. Signed-off-by:
-
Matthew Wilcox authored
Move the error reporting into AscInitGetConfig, AdvInitGetConfig and AscInitSetConfig. Signed-off-by:
-
Matthew Wilcox authored
It's just data, so format it to something that looks more visually appealing (and saves some lines) Signed-off-by:
-
Matthew Wilcox authored
Split AdvLoadMicrocode out of AdvInitAsc3550Driver, AdvInitAsc38C0800Driver and AdvInitAsc38C1600Driver. Signed-off-by:
-
Matthew Wilcox authored
Split AdvBuildCarrierFreelist out of AdvInitAsc3550Driver, AdvInitAsc38C0800Driver and AdvInitAsc38C1600Driver. Signed-off-by:
-
Matthew Wilcox authored
You can't have two drivers for the same bus type with the same name. Since ISA and VLB are both isa_drivers, rename the VLB one to advansys_vlb. Signed-off-by:
-
Swen Schillig authored
Cleanup the whitepace from the entire zfcp driver to prevent to have those changes in future feature or function patches. Signed-off-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
-
Mariusz Kozlowski authored
alloc_fcdev() calls alloc_netdev() which uses kzalloc to alloc all the memory together with dev->priv region hence no zeroing of structs inside struct mpt_lan_priv needed. Signed-off-by:
Mariusz Kozlowski <m.kozlowski@tuxland.pl> Acked-by:
"Moore, Eric Dean" <Eric.Moore@lsil.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Jesper Juhl authored
The Coverity checker spotted two potential memory leaks in drivers/message/fusion/mptbase.c::mpt_attach(). There are two returns that may leak the storage allocated for 'ioc' (sizeof(MPT_ADAPTER) bytes). A simple fix would be to simply add two kfree() calls before the return statements, but a better fix (that this patch implements) is to reorder the code so that if we hit the first return condition we don't have to do the allocation at all and then just add a kfree() call for the second case. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Acked-by:
-
Mariusz Kozlowski authored
This patch does kmalloc + memset conversion to kzalloc anSigned-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> d simplifies mptctl_probe(). drivers/message/fusion/mptctl.c | 82092 -> 81884 (-208 bytes) drivers/message/fusion/mptctl.o | 201784 -> 200648 (-1136 bytes) Signed-off-by:
-
Jan Engelhardt authored
Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by:
Jan Engelhardt <jengelh@gmx.de> Acked-by:
-
FUJITA Tomonori authored
srp transport works for target drivers without supported_mode attribute but it would be better to use it explicitly. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
-
FUJITA Tomonori authored
This adds minimum target driver support like the srp transport does: - fc_remote_port_{rolechg,delete} calls scsi_tgt_it_nexus_{create,destroy} for target drivers. - add callbacks to notify target drivers of the nexus and tmf operation results to fc_function_template. Signed-off-by:Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
FUJITA Tomonori authored
This adds supported_mode and active_mode attributes to /sys/class/sys_host/hostX/ for specifying the mode that a lld supports and the currently activated mode. The output format is similar to fc rport roles: luce:/sys/class/scsi_host/host0$ cat supported_mode Initiator luce:/sys/class/scsi_host/host0$ cat active_mode Initiator The mode values uses bitmap since we would support dual-mode llds in the future like this: luce:/sys/class/scsi_host/host0$ cat supported_mode Initiator, Target The supported_mode attribute looks at a scsi_host_template and the active_mode attribute looks at a scsi_host. We would add a hook to a scsi_host_template to change the active_mode attribute dynamically. But now there is no hook since no lld supports that feature. Signed-off-by:
-
FUJITA Tomonori authored
should use host->can_queue instead of host->hostt->can_queue. Signed-off-by:
-
Gilbert Wu authored
Add new HBA PCI ID (0x416) for ASC58300 which has eight port SAS and SATA PCI-X 133MHz low profile host bus adapter with two mini SAS 4x external connectors. Signed-off-by:
Gilbert Wu <gilbert_wu@adaptec.com> Signed-off-by:
-
Salyzyn, Mark authored
Add the SMC LP, SUN EM and Adaptec 5405 cards to the aacraid documentation list of supported products. These cards are picked up with family match, so no associated code changes. Signed-off-by:
Mark Salyzyn <aacraid@adaptec.com> Signed-off-by:
-
HighPoint Linux Team authored
updated patch based on Jeff Garzik's comments. - check adapter firmware version and use appropriate interface accordingly - add new PCI device IDs and use PCI_VDEVICE macro - update driver version string - remove unused data structures - remove unnecessary typecasts Signed-off-by:
HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by:
-
Christof Schmitt authored
Already register the debug feature before the zfcp adapter is set online. This allows to use the debug feature to investigate the online/offline sequence. Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
-
Swen Schillig authored
cleanup, using ERP request mempool for all ERP versions of the exchange functions (exchange_config (ECD), exchange_port (EPD) ) providing individual versions of the ECD, EPD functions for ERP and other purposes (_sync). Signed-off-by:
-
Christof Schmitt authored
This change has already been discussed on linux-scsi: http://marc.info/?t=118771096400003 http://marc.info/?t=118760913100005Signed-off-by:
James Smart <James.Smart@Emulex.Com> Signed-off-by:
-
Christof Schmitt authored
Remove braces for only one statement Signed-off-by:
-
Christof Schmitt authored
zfcp_adapter_enqueue initialized adapter->ccw_device twice with the same value. Remove the second assignment, since it is not necessary. Signed-off-by:
-
Heiko Carstens authored
Avoid "if (whatever) ;" constructs since they seem to confuse people, even if there is a comment. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Christof Schmitt authored
correct indentation for nested if-else Signed-off-by:
-
Mariusz Kozlowski authored
In NCR_D700, a4000t, aic7xxx_old, bvme6000, dpt_i2o, gdth, lpfc, megaraid, mvme16x osst, pluto, qla2xxx, zorro7xx Signed-off-by:
-
Prakash, Sathya authored
Recently LSI Logic Corp was renamed as LSI Corp, so whereever there is a reference of LSI Logic, it is changed to LSI in mpt fusion driver code. signed-off-by:
Sathya Prakash <sathya.prakash@lsi.com> Acked-by:
Eric Moore <Eric.Moore@lsi.com> Signed-off-by:
-
Prakash, Sathya authored
When there is state change in FC links, a message is displayed with old and new link speed. signed-off-by:
-
Prakash, Sathya authored
The data structure definitions from mptsas.c are moved to a new header file mptsas.h signed-off-by:
-
Prakash, Sathya authored
The call back index requires only u8 but in lot of places it is referred as int, now everywhere the call back index variables are declared as u8 with uniform name cb_idx signed-off-by:
-
Prakash, Sathya authored
Added support for sending the task management requests through High priority request FIFO instead of Doorbell writes when firmware support High priority FIFO. signed-off-by:
-
Eric Moore authored
Per request from Matthew Wilcox - using PCI_VENDOR_ATTO. Add support for ATTO UL4D, they are rebranded 53C1030. The changes are 1. Adding a new PCI vendor ID in pci table 2. The spi_port_page_2 is in different format than that of LSI generic spi_port_page_2 and hence mapping code is added. signed-off-by:
-
Eric Moore authored
A new PCI_VENDOR_ID for pci_ids.h. signed-off-by:
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Gabriel C authored
In file included from drivers/scsi/g_NCR5380_mmio.c:9: drivers/scsi/g_NCR5380.c:559:5: warning: "NCR53C400_PSEUDO_DMA" is not defined Signed-off-by:
Gabriel Craciunescu <nix.or.die@googlemail.com> Signed-off-by:
-
