- Support for the Philips LPH8923 LCD panel
- Support for the Epson HWA742 LCD controller

- Support for frame buffer located in SRAM and/or SDRAM
- Support for boot loader initialized LCD controller / frame buffer
  content.

- LCD panels will now register a device in the relevant board-* files
  instead of specifying the LCD type as an OMAP_TAG_LCD. The controller
  type is still specified in OMAP_TAG_LCD.
- A new ATAG OMAP_TAG_FBMEM is used to describe the frame buffer memory
  configuration (SRAM and SDRAM regions)

- Changed the OMAP1 LCD controller driver to export its functions
  through the lcd_ctrl object.
- OMAP1 pixel clock divider will now round up in lcdc.c
- Changed the OMAP1 SoSSI driver to export its functions through the
  lcd_ctrl_extif object.
- OMAP1 SoSSI clock calculation goes through all possible clock
  dividers. Rounding of clock tick values now takes places at each
  timing parameter.

- OMAP2 RFBI clock calculation goes through all possible clock
  dividers. Rounding of clock tick values now takes places at each
  timing parameter.
- OMAP2 pixel clock divider will now round up in dispc.c
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Juha Yrjl <juha.yrjola@nokia.com>

Presently we have OMAP_TAG_SERIAL_CONSOLE that wraps in to
add_preferred_console() for the serial console, this does the same
thing with OMAP_TAG_STI_CONSOLE so it's selectable who gets tty
control.
Signed-off-by: Paul Mundt <paul.mundt@nokia.com>

This patch adds a Bluetooth HCI driver for the TI BRF6150
chip with Nokia H4 extensions. The chip is e.g. on the Nokia 770.
Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Juha Yrjl <juha.yrjola@nokia.com>

The converted driver originated from David Brownell, with some
modifications by Imre.
Signed-off-by: Imre Deak <imre.deak@nokia.com>
Signed-off-by: Juha Yrjl <juha.yrjola@nokia.com>

Signed-off-by: Juha Yrjl <juha.yrjola@nokia.com>

Signed-off-by: Juha Yrjl <juha.yrjola@nokia.com>

Signed-off-by: Juha Yrjl <juha.yrjola@nokia.com>

Signed-off-by: Juha Yrjl <juha.yrjola@nokia.com>

Signed-off-by: Juha Yrjölä <juha.yrjola@nokia.com>

Avoid other SA_TRIGGER_* flags triggering BUG()

This implements a simple subsystem for the OMAP serial tracing interface,
as found in omap16xx and omap24xx.

There's a few things implemented in this patch:

        - STI console support
        - STI netlink support
        - STI RX FIFO support

In addition to this, we also provide a general tracing framework that can
be used by both the kernel and userspace (and imask control for allowing
DSP-side STI manipulation).

Since the IRQ is multiplexed, drivers register for the bits they're
interested in (the RX FIFO is an example of this).

The netlink interface exists for streaming data bi-directionally. This is
currently done using NETLINK_USERSOCK, which ends up being somewhat
limiting.

All of these things have been tested on both OMAP1 and OMAP2, and it
takes in to account some of the protocol differences.

New way to handle irq trigger mode is to pass it as flag to
request_irq()  instead of using special ARM function
set_irq_mode().

Signed-off-by: Dirk Behme <dirk.behme_at_gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The new way to pass level detection is with the SA_TRIGGER_*
flags wit request_irq instead of set_irq_type().

As we may get other flags in the trigger, we must mask the flag
instead of comparing it directly.

Needs to be fixed.

Quick fix to make drivers compile and work again. Needs
to be verified.

Current implementation of omap_i2c_isr doesn't work on OMAP5910 (Too
much work in one IRQ). Interrupt service routine is broken in these
aspects:
* it tries to ack interrupt by writing to read-only status register.
* it doesn't ackowledge interrupt properly by reading interrupt vector
  register.
I'm assuming that driver works correctly on other OMAPs (right? ;-)), so
proposed patch adds interrupt service routine for 15xx cpus and deletes
rev1 stuff from omap_i2c_isr. Tested on OMAP5910 with DS1339 clock on
I2C bus.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

omap_i2c_xfer is supposed to return number of messages successfuly
transfered. Remove bogus condition which causes it to fail when
transfering one message.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

After converting the cpu physical address to shub2 physical
addressing, the address was run through TO_PHYS() which
clobbered a high node offset bit causing the BTE to fail
on shub2 nodes with large memory.  This fix corrects
that problem.

Signed-off-by: Russ Anderson (rja@sgi.com)
Signed-off-by: Tony Luck <tony.luck@intel.com>

When we pull the PPP protocol off the skb, we forgot to update the
hardware RX checksum.  This may lead to messages such as

	dsl0: hw csum failure.

Similarly, we need to clear the hardware checksum flag when we use
the existing packet to store the decompressed result.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

I thought we had fixed up all non-gpl USB drivers, and was wrong to do
this.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The non-NUMA case would do an unmatched "free_alien_cache()" on an alien
pointer that had never been allocated.

It might not matter from a code generation standpoint (since in the
non-NUMA case, the code doesn't actually _do_ anything), but it not only
results in a compiler warning, it's really really ugly too.

Fix the compiler warning by just having a matching dummy allocation.
That also avoids an unnecessary #ifdef in the code.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

On a system where libintl.h is present, but the NLS functionality is
supplied by a separate library instead of the system C library, an attempt
to "make config" or "make menuconfig" will fail with link errors, ex:

  scripts/kconfig/mconf.o:mconf.c:(.text+0xf63): undefined reference to
    `_libintl_gettext'

This patch attempts to correct the problem by detecting whether or not NLS
support requires linking with libintl.
Signed-off-by: Samuel J Robb <sam.robb@timesys.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Due to the usage of set_64bit in include/asm-i386/pgtable-3level.h,
HIGHMEM64G must depend on X86_CMPXCHG64.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix gcc4.1 compile warnings "value computed is not used" with
set_current_state() and set_task_state() on i386/SMP and x86-64.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Show first field of kernel version in register dumps like x86_64 does.

Changes output from e.g.:
	(2.6.16-rc1)
to:
	(2.6.16-rc1 #12)
Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

i386 CPU init code accesses freed init memory when booting a newly-started
processor after CPU hotplug.  The cpu_devs array is searched to find the
vendor and it contains pointers to freed data.

Fix that by:

        1. Zeroing entries for freed vendor data after bootup.
        2. Changing Transmeta, NSC and UMC to all __init[data].
        3. Printing a warning (once only) and setting this_cpu
           to a safe default when the vendor is not found.

This does not change behavior for AMD systems.  They were broken already
but no error was reported.
Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

When walking a path, the LOOKUP_CONTINUE flag is used by some filesystems
(for instance NFS) in order to determine whether or not it is looking up
the last component of the path.  It this is the case, it may have to look
at the intent information in order to perform various tasks such as atomic
open.

A problem currently occurs when link_path_walk() hits a symlink.  In this
case LOOKUP_CONTINUE may be cleared prematurely when we hit the end of the
path passed by __vfs_follow_link() (i.e.  the end of the symlink path)
rather than when we hit the end of the path passed by the user.

The solution is to have link_path_walk() clear LOOKUP_CONTINUE if and only
if that flag was unset when we entered the function.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This fixes locking and bugs in cpu_down and cpu_up paths of the NUMA slab
allocator.  Sonny Rao <sonny@burdell.org> reported problems sometime back on
POWER5 boxes, when the last cpu on the nodes were being offlined.  We could
not reproduce the same on x86_64 because the cpumask (node_to_cpumask) was not
being updated on cpu down.  Since that issue is now fixed, we can reproduce
Sonny's problems on x86_64 NUMA, and here is the fix.

The problem earlier was on CPU_DOWN, if it was the last cpu on the node to go
down, the array_caches (shared, alien) and the kmem_list3 of the node were
being freed (kfree) with the kmem_list3 lock held.  If the l3 or the
array_caches were to come from the same cache being cleared, we hit on
badness.

This patch cleans up the locking in cpu_up and cpu_down path.  We cannot
really free l3 on cpu down because, there is no node offlining yet and even
though a cpu is not yet up, node local memory can be allocated for it.  So l3s
are usually allocated at keme_cache_create and destroyed at
kmem_cache_destroy.  Hence, we don't need cachep->spinlock protection to get
to the cachep->nodelist[nodeid] either.

Patch survived onlining and offlining on a 4 core 2 node Tyan box with a 4
dbench process running all the time.
Signed-off-by: Alok N Kataria <alokk@calsoftinc.com>
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Cc: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Earlier, we had to disable on chip interrupts while taking the
cachep->spinlock because, at cache_grow, on every addition of a slab to a slab
cache, we incremented colour_next which was protected by the cachep->spinlock,
and cache_grow could occur at interrupt context.  Since, now we protect the
per-node colour_next with the node's list_lock, we do not need to disable on
chip interrupts while taking the per-cache spinlock, but we just need to
disable interrupts when taking the per-node kmem_list3 list_lock.
Signed-off-by: Alok N Kataria <alokk@calsoftinc.com>
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Cc: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

colour_next is used as an index to add a colouring offset to a new slab in the
cache (colour_off * colour_next).  Now with the NUMA aware slab allocator, it
makes sense to colour slabs added on the same node sequentially with
colour_next.

This patch moves the colouring index "colour_next" per-node by placing it on
kmem_list3 rather than kmem_cache.

This also helps simplify locking for CPU up and down paths.
Signed-off-by: Alok N Kataria <alokk@calsoftinc.com>
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Cc: Christoph Lameter <christoph@lameter.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>