- 05 Oct, 2009 25 commits
-
-
Jeremy Fitzhardinge authored
commit 577eebea upstream. -fstack-protector uses a special per-cpu "stack canary" value. gcc generates special code in each function to test the canary to make sure that the function's stack hasn't been overrun. On x86-64, this is simply an offset of %gs, which is the usual per-cpu base segment register, so setting it up simply requires loading %gs's base as normal. On i386, the stack protector segment is %gs (rather than the usual kernel percpu %fs segment register). This requires setting up the full kernel GDT and then loading %gs accordingly. We also need to make sure %gs is initialized when bringing up secondary cpus too. To keep things consistent, we do the full GDT/segment register setup on both architectures. Because we need to avoid -fstack-protected code before setting up the GDT and because there's no way to disable it on a per-function basis, several files need to have stack-protector inhibited. [ Impact: allow Xen booting with stack-protector enabled ] Signed-off-by:
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Chuck Ebbert authored
commit 20d1752f upstream. commit ac683924 ("[CIFS] Allow raw ntlmssp code to be enabled with sec=ntlmssp") added a new bit to the allowed security flags mask but seems to have inadvertently removed Lanman security from the allowed flags. Add it back. Signed-off-by:
Chuck Ebbert <cebbert@redhat.com> Signed-off-by:
Steve French <sfrench@us.ibm.com> Signed-off-by:
-
Tyler Hicks authored
commit 9c2d2056 upstream. When calling vfs_unlink() on the lower dentry, d_delete() turns the dentry into a negative dentry when the d_count is 1. This eventually caused a NULL pointer deref when a read() or write() was done and the negative dentry's d_inode was dereferenced in ecryptfs_read_update_atime() or ecryptfs_getxattr(). Placing mutt's tmpdir in an eCryptfs mount is what initially triggered the oops and I was able to reproduce it with the following sequence: open("/tmp/upper/foo", O_RDWR|O_CREAT|O_EXCL|O_NOFOLLOW, 0600) = 3 link("/tmp/upper/foo", "/tmp/upper/bar") = 0 unlink("/tmp/upper/foo") = 0 open("/tmp/upper/bar", O_RDWR|O_CREAT|O_NOFOLLOW, 0600) = 4 unlink("/tmp/upper/bar") = 0 write(4, "eCryptfs test\n"..., 14 <unfinished ...> +++ killed by SIGKILL +++ https://bugs.launchpad.net/ecryptfs/+bug/387073Reported-by:
Loïc Minier <loic.minier@canonical.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: ecryptfs-devel@lists.launchpad.net Signed-off-by:
Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by:
-
Tyler Hicks authored
commit 38919598 upstream. When searching through the global authentication tokens for a given key signature, verify that a matching key has not been revoked and has not expired. This allows the `keyctl revoke` command to be properly used on keys in use by eCryptfs. Acked-by:
Serge Hallyn <serue@us.ibm.com> Cc: ecryptfs-devel@lists.launchpad.net Signed-off-by:
-
Tyler Hicks authored
commit df6ad33b upstream. Returns -ENOTSUPP when attempting to use filename encryption with something other than a password authentication token, such as a private token from openssl. Using filename encryption with a userspace eCryptfs key module is a future goal. Until then, this patch handles the situation a little better than simply using a BUG_ON(). Acked-by:
-
Tyler Hicks authored
commit ac22ba23 upstream. If the lower inode is read-only, don't attempt to open the lower file read/write and don't hand off the open request to the privileged eCryptfs kthread for opening it read/write. Instead, only try an unprivileged, read-only open of the file and give up if that fails. This patch fixes an oops when eCryptfs is mounted on top of a read-only mount. Acked-by:
-
Tyler Hicks authored
commit b0105eae upstream. Returns an error when an unrecognized cipher code is present in a tag 3 packet or an ecryptfs_crypt_stat cannot be initialized. Also sets an crypt_stat->tfm error pointer to NULL to ensure that it will not be incorrectly freed in ecryptfs_destroy_crypt_stat(). Acked-by:
-
Jan Kara authored
commit 580be083 upstream. In theory it could happen that on one CPU we initialize a new inode but clearing of I_NEW | I_LOCK gets reordered before some of the initialization. Thus on another CPU we return not fully uptodate inode from iget_locked(). This seems to fix a corruption issue on ext3 mounted over NFS. [akpm@linux-foundation.org: add some commentary] Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ivan Kokshaysky authored
commit d68721eb upstream. This brings Alpha AGP platforms in sync with the change to struct agp_memory (unsigned long *memory => struct page **pages). Only compile tested (I don't have titan/marvel hardware), but this change looks pretty straightforward, so hopefully it's ok. Signed-off-by:
Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by:
-
Wolfgang Muees authored
commit d08ebedd upstream. Some time ago, I have send a patch to the mmc_spi subsystem changing the error codes. This was after a discussion with Pierre about using EINVAL only for non-recoverable errors. This patch was accepted as http://git.kernel.org/linus/fdd858db7113ca64132de390188d7ca00701013d Unfortunately, several weeks later, I realized that this patch has opened a little can of worms because there are SD cards on the market which a) claim that they support the switch command AND b) refuse to execute this command if operating in SPI mode. So, such a card would get unusuable in an embedded linux system in SPI mode, because the init sequence terminates with an error. This patch adds the missing error codes to the caller of the switch command and restores the old behaviour to fail gracefully if these commands can not execute. Signed-off-by:
Wolfgang Muees <wolfgang.mues@auerswald.de> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Aaro Koskinen authored
commit 532f649f upstream. The patch enables the driver to be used on platforms such as ARM where an I/O address is a 32-bit memory address. The patch avoids the following kernel oops: debian:~# modprobe sisfb [ 73.070000] sisfb: Video ROM found [ 73.080000] sisfb: Video RAM at 0x80000000, mapped to 0xe0a00000, size 1024k [ 73.090000] sisfb: MMIO at 0x84080000, mapped to 0xe0b80000, size 256k [ 73.090000] sisfb: Memory heap starting at 800K, size 32K [ 73.360000] Unable to handle kernel paging request at virtual address 6e000844 [ 73.380000] pgd = df230000 [ 73.380000] [6e000844] *pgd=00000000 [ 73.380000] Internal error: Oops: 8f5 [#1] [ 73.380000] Modules linked in: sisfb(+) fb cfbcopyarea cfbimgblt cfbfillrect [ 73.380000] CPU: 0 Not tainted (2.6.31-iop32x #1) [ 73.380000] PC is at SiS_SetRegANDOR+0x10/0x38 [sisfb] [ 73.380000] LR is at SiS_SetSCLKHigh+0x38/0x94 [sisfb] [ 73.380000] pc : [<bf01dc00>] lr : [<bf0238f8>] psr: 60000013 [ 73.380000] sp : df38fd00 ip : 6e000000 fp : 00000002 [ 73.380000] r10: 00000108 r9 : 00000000 r8 : 00000108 [ 73.380000] r7 : df064258 r6 : 00000110 r5 : 6e000844 r4 : 0000010a [ 73.380000] r3 : 00000001 r2 : 0000000e r1 : 00000011 r0 : 00000844 [ 73.380000] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 73.380000] Control: 0000397f Table: bf230000 DAC: 00000015 [ 73.380000] Process modprobe (pid: 1849, stack limit = 0xdf38e270) [ 73.380000] Stack: (0xdf38fd00 to 0xdf390000) [ 73.380000] fd00: 0000010a 00000108 df064258 df064258 df064258 00000000 00000000 bf02c4e0 [ 73.380000] fd20: 00000114 bf02c50c 00000013 00000114 0000010a df064258 00000000 bf02c980 [ 73.380000] fd40: 00009c66 00000004 00000001 df064250 a0010000 a6a2a0a0 df064250 00000003 [ 73.380000] fd60: df064250 00000000 df064258 0000fffd 00000000 00000000 00000000 bf033948 [ 73.380000] fd80: 00000000 00000000 00000000 bf019e2c 00000000 df064a70 bf03b470 00010000 [ 73.380000] fda0: 00000000 df064250 00000000 df831c00 00000012 bf039f70 00000000 c00abed8 [ 73.380000] fdc0: 000008a6 000008a4 df0649b0 df064878 df064258 df064000 00000000 00000000 [ 73.380000] fde0: 00000001 00008000 00000001 00030000 df81c930 bf049f88 df831c00 00000000 [ 73.380000] fe00: bf049f58 df3952a0 c0447708 bf049f88 bf049fe0 c0191980 df831c00 c0191b10 [ 73.380000] fe20: df831c58 bf049f58 df831c00 bf04aca8 df3952a0 df831c58 df831c58 bf049f88 [ 73.380000] fe40: c01ba1b4 c01ba0a0 df831c58 df831c8c bf049f88 c01ba1b4 df3952a0 00000000 [ 73.380000] fe60: c03e265c c01ba240 00000000 df38fe78 bf049f88 c01b990c df812938 df81b8d0 [ 73.380000] fe80: df3952a0 df807780 00000000 00000060 bf049f88 c01b9224 bf0429c8 00000000 [ 73.380000] fea0: bf049f58 00000000 bf049f88 00000000 00000000 bf04aea8 00000000 c01ba4e4 [ 73.380000] fec0: e09861a0 bf049f58 00000000 bf049f88 00000000 c0191f20 00000000 00000000 [ 73.380000] fee0: c03f7bac bf04d418 0000fff2 0000fff1 bf04ad08 0002f260 0002f260 e0986038 [ 73.380000] ff00: e0986150 e098568b df143340 e0990280 00000036 c03d8b00 fffffffd 00000000 [ 73.380000] ff20: bf04acfc 00000000 fffffffc 0003cf4b 00018098 c03f7bac 00000000 bf04d000 [ 73.380000] ff40: df38e000 00000000 bedc0984 c00272a4 ffffffff c005bc88 00000000 00000000 [ 73.380000] ff60: 0003cf4b 0003cf4b 00018098 bf04acfc 00000000 c0027fe8 df38e000 00000000 [ 73.380000] ff80: bedc0984 c006882c 00001000 00000003 00000000 00009064 00000000 00008edc [ 73.380000] ffa0: 00000080 c0027e20 00009064 00000000 4014e000 0003cf4b 00018098 0003cf4b [ 73.380000] ffc0: 00009064 00000000 00008edc 00000080 00000000 00000000 40025000 bedc0984 [ 73.380000] ffe0: 00000000 bedc08fc 0000b6b0 400e8f34 60000010 4014e000 00000000 00000000 [ 73.380000] [<bf01dc00>] (SiS_SetRegANDOR+0x10/0x38 [sisfb]) from [<df064258>] (0xdf064258) [ 73.380000] Code: e92d0030 e20110ff e280546e e3a0c46e (e5c51000) [ 73.680000] ---[ end trace 62a93e01df37a5f2 ]--- Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by:
-
Paul Mundt authored
commit a9ece53c upstream. Commit b478b782 "kallsyms, tracing: output more proper symbol name" introduces a "bugfix" that introduces a segfault in kallsyms in my configurations. The cause is the introduction of prefix_underscores_count() which attempts to count underscores, even in symbols that do not have them. As a result, it just uselessly runs past the end of the buffer until it crashes: CC init/version.o LD init/built-in.o LD .tmp_vmlinux1 KSYM .tmp_kallsyms1.S /bin/sh: line 1: 16934 Done sh-linux-gnu-nm -n .tmp_vmlinux1 16935 Segmentation fault | scripts/kallsyms > .tmp_kallsyms1.S make: *** [.tmp_kallsyms1.S] Error 139 This simplifies the logic and just does a straightforward count. Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Reviewed-by:
Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Paulo Marques <pmarques@grupopie.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Ian Armstrong authored
commit 2ddce3fd upstream. Attempting to unload a framebuffer module calls unregister_framebuffer() which in turn gets fbcon to release it. If fbcon has no framebuffers linked to a console, it will also unbind itself from the console driver. However, if fbcon never registered itself as a console driver, the unbind will fail causing the framebuffer device entry to persist. In most cases this failure will result in an oops when attempting to access the now non-existent device. This patch ensures that the fbcon unbind request will succeed even if a bind was never done. It tracks if a successful bind ever occurred & will only attempt to unbind if needed. If there never was a bind, it simply returns with no error. Signed-off-by:
Ian Armstrong <ian@iarmst.demon.co.uk> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Alex Chiang authored
commit 7e24bc1c upstream. Similar to commit b6adc195 (PCI hotplug: acpiphp wants a 64-bit _SUN), pci_slot.ko reads and creates sysfs directories based on the _SUN method. Certain HP platforms return 64 bits in _SUN. This change to pci_slot.ko allows us to see the correct sysfs directories. Reported-by:
Chad Smith <chad.smith@hp.com> Signed-off-by:
Alex Chiang <achiang@hp.com> Signed-off-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Henrique de Moraes Holschuh authored
commit 6da25bf5 upstream. X40 (firmware 1V) and T41 (firmware 1R) have been confirmed to work well with the new defaults, so we can stop pestering people to confirm that fact. For now, whitelist just these two firmware types. It is best to have at least one more firmware type confirmed for Radeon 9xxx and Intel GMA-2 ThinkPads before removing the confirmation requests entirely. Reported-by:
Robert de Rooy <robert.de.rooy@gmail.com> Signed-off-by:
Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by:
-
Andrew Morton authored
commit 00d3803b upstream. drivers/mfd/ab3100-core.c:647: error: ab3100_init_settings causes a section type conflict Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Jory A. Pratt authored
commit c47efe55 upstream. The arch/*/boot/Makefile use cc-options to check for GCC command options and cc-options use the hardened specs when checking for GCC command options. When -fPIE is pass to cc1 it can't use -ffreestanding or -fno-toplevel-reorder. Then it fail to build stuff with -ffreestanding and -fno-toplevel-reorder. Thanks to Fredric Johansson for finding the main problem behind a failed build using a hardened toolchain. Signed-off-by:
Magnus Granberg <zorry@ume.nu> Signed-off-by:
Jory A. Pratt <anarchy@gentoo.org> Cc: Fredric Johansson <johansson_fredric@hotmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Peter Korsgaard authored
commit 3163eaba upstream. Fixes `s3c_fb_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.devexit.text' of drivers/built-in.o With CONFIG_HOTPLUG=n, functions marked with __devexit gets removed, so make sure we use __devexit_p when referencing pointers to them. Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Acked-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Manuel Lauss authored
commit ce60c488 upstream. Add ID for Telit UC-864G GPS/UMTS/WCDMA modem and GPS receiver to the option driver. Signed-off-by:
Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by:
-
Huzaifa Sidhpurwala authored
commit a67d8e6c upstream. A few days ago i got the latest ZTE EVDO modem shown at: http://img.alibaba.com/photo/240150115/ZTE_AC2726_EVDO_USB_Data_Modem.jpg It seems that the latest kernel does not have support for it. I wrote a small patch for the options.c module to add the relevant usb ids to it. From: Huzaifa Sidhpurwala <sidhpurwala.huzaifa@gmail.com> Signed-off-by:
-
Mike Frysinger authored
commit 0271edd4 upstream. Since early printk only makes sense/works when the serial driver is built into the kernel, disable the option for this driver when it is going to be built as a module. Otherwise we get build failures due to the ifdef handling. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Michal Hocko authored
commit 80938332 upstream. Currently we are not including randomized stack size when calculating mmap_base address in arch_pick_mmap_layout for topdown case. This might cause that mmap_base starts in the stack reserved area because stack is randomized by 1GB for 64b (8MB for 32b) and the minimum gap is 128MB. If the stack really grows down to mmap_base then we can get silent mmap region overwrite by the stack values. Let's include maximum stack randomization size into MIN_GAP which is used as the low bound for the gap in mmap. Signed-off-by:
Michal Hocko <mhocko@suse.cz> LKML-Reference: <1252400515-6866-1-git-send-email-mhocko@suse.cz> Acked-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Christian Lamparter authored
commit f7f71173 upstream. This patch adds a new usbid for Zcomax XG-705A to the device table. Reported-by:
Jari Jaakola <jari.jaakola@gmail.com> Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Robert Hancock authored
commit 90950a25 upstream. On a Compaq Presario V3000 laptop (NVIDIA MCP51 chipset), pata_amd selects PIO0 mode for the PATA DVD-RAM drive instead of MWDMA2 which it supports: ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2 ata4: nv_mode_filter: 0x39f&0x7001->0x1, BIOS=0x0 (0x0) ACPI=0x7001 (60:600:0x11) ata4.00: configured for PIO0 For some reason, the BIOS-set UDMA configuration returns 0 and the ACPI _GTM reports that UDMA2 and PIO0 are enabled. This causes nv_mode_filter to end up allowing only PIO0 and UDMA0-2. Since the drive doesn't support UDMA we end up using PIO0. Since the controllers should always support PIO4, MWDMA2 and UDMA2 regardless of what cable type is used, let's make sure we don't filter out these modes regardless of what wacky settings the BIOS is using. Signed-off-by:
Robert Hancock <hancockrwd@gmail.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Sheng Yang authored
commit 95eb84a7 upstream QNX update WP bit when paging enabled, which is not covered yet. This one fix QNX boot with EPT. Signed-off-by:
Sheng Yang <sheng@linux.intel.com> Signed-off-by:
Avi Kivity <avi@redhat.com> Signed-off-by:
-
- 24 Sep, 2009 15 commits
-
-
Greg Kroah-Hartman authored
-
Brian King authored
commit 46db2f86 upstream. The SLB can change sizes across a live migration, which was not being handled, resulting in possible machine crashes during migration if migrating to a machine which has a smaller max SLB size than the source machine. Fix this by first reducing the SLB size to the minimum possible value, which is 32, prior to migration. Then during the device tree update which occurs after migration, we make the call to ensure the SLB gets updated. Also add the slb_size to the lparcfg output so that the migration tools can check to make sure the kernel has this capability before allowing migration in scenarios where the SLB size will change. BenH: Fixed #include <asm/mmu-hash64.h> -> <asm/mmu.h> to avoid breaking ppc32 build Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Jean Delvare authored
commit 6b5096e4 upstream. One more form factor for Compaq Evo D510, which needs the same quirk as the other form factors. Apparently there's no hardware monitoring chip on that one, but SPD EEPROMs, so it's still worth unhiding the SMBus. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Tested-by:
Nuzhna Pomoshch <nuzhna_pomoshch@yahoo.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Alexander Duyck authored
commit 6f1186be upstream. This patch adds the most recent additions to the list of 82576 device IDs to the list of devices needing the SR-IOV quirk. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Tejun Heo authored
commit ac8672ea upstream. ata_tf_read_block() has off-by-one error when converting CHS address to LBA. The bug isn't very visible because ata_tf_read_block() is used only when generating sense data for a failed RW command and CHS addressing isn't used too often these days. This problem was spotted by Atsushi Nemoto. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
-
Marcelo Tosatti authored
commit 1444885a upstream. Otherwise its possible to starve the host by programming lapic timer with a very high frequency. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
Avi Kivity authored
commit ee3d29e8 upstream. The jump target should not be sign extened; use an unsigned decode flag. Signed-off-by:
-
Izik Eidus authored
commit 3b80fffe upstream. First check if the list is empty before attempting to look at list entries. Signed-off-by:
Izik Eidus <ieidus@redhat.com> Signed-off-by:
-
Avi Kivity authored
commit c9eaf20f upstream. Absolute jumps use zero extended immediate operands. Signed-off-by:
-
Gleb Natapov authored
commit 5fff7d27 upstream. Don't call adjust_vmx_controls() two times for the same control. It restores options that were dropped earlier. This loses us the cr8 exit control, which causes a massive performance regression Windows x64. Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
-
Jan Kiszka authored
commit 07708c4a upstream. So far unprivileged guest callers running in ring 3 can issue, e.g., MMU hypercalls. Normally, such callers cannot provide any hand-crafted MMU command structure as it has to be passed by its physical address, but they can still crash the guest kernel by passing random addresses. To close the hole, this patch considers hypercalls valid only if issued from guest ring 0. This may still be relaxed on a per-hypercall base in the future once required. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
Glauber Costa authored
commit a20316d2 upstream. The use of __pa() to calculate the address of a C-visible symbol is wrong, and can lead to unpredictable results. See arch/x86/include/asm/page.h for details. It should be replaced with __pa_symbol(), that does the correct math here, by taking relocations into account. This ensures the correct wallclock data structure physical address is passed to the hypervisor. Signed-off-by:
Glauber Costa <glommer@redhat.com> Signed-off-by:
-
Avi Kivity authored
commit 0a79b009 upstream. Debug registers may only be accessed from cpl 0. Unfortunately, vmx will code to emulate the instruction even though it was issued from guest userspace, possibly leading to an unexpected trap later. Signed-off-by:
-
Gleb Natapov authored
commit 65a82211 upstream. This bug was introduced by b4a2f5e7. Signed-off-by:
-
Marcelo Tosatti authored
commit 6ba66178 upstream. Commit b8bcfe99 made paravirt pte updates synchronous in interrupt context. Unfortunately the KVM pv mmu code caches the lazy/nonlazy mode internally, so a pte update from interrupt context during a lazy mmu operation can be batched while it should be performed synchronously. https://bugzilla.redhat.com/show_bug.cgi?id=518022 Drop the internal mode variable and use paravirt_get_lazy_mode(), which returns the correct state. Signed-off-by:
-
