- 25 Jan, 2008 40 commits
-
-
Adrian Bunk authored
This patch makes the following needlessly global code static: - dst_gpio_outb() - dst_gpio_inb() - rdc_8820_reset() - dst_pio_enable() - dst_command() - struct tuner_list[] Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Roel Kluin authored
Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> CC: Antti Palosaari <crope@iki.fi> CC: Carl Lundqvist <comabug@gmail.com> CC: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
Thanks to Trent Piepho for pointing this out. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Hauppauge firmwares can be decoded using tveeprom. This patch adds HVR-900 as a tveeprom client. It also adds xc3028 tuner entry to tveeprom. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
The status registers require a dword for setting register. Fix it on all occurrences, and at xc3028_get_reg. Also, improves the hardware/firmware detection printk. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Tuner-type were correctly filled only by the hint function. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
The default_mode_mask global is replaced by a list of tuner structs. The tuner driver now walks that list to see which radio and/or tv tuner devices are registered to a given i2c adapter. The default_mode_mask global had to go since this is no longer supported with the new bus-based I2C API. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
To ensure prevention of detecting a tda9885/6/7 as a tda8290 or tda8295, we will rule out the tda988x before testing the tda8290 / tda8295 id registers. We read 8 bytes from the chip. If they are all equal, then it is not a tda829x, or some other error has occurred. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
From: Mauro Carvalho Chehab <mchehab@infradead.org> In file included from drivers/media/video/em28xx/em28xx-i2c.c:31: drivers/media/video/tuner-xc2028.h:10:26: error: dvb_frontend.h: No such file or directory In file included from drivers/media/video/em28xx/em28xx-i2c.c:31: drivers/media/video/tuner-xc2028.h:32: warning: 'struct dvb_frontend' declared inside parameter list drivers/media/video/tuner-xc2028.h:32: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
From: Mauro Carvalho Chehab <mchehab@infradead.org> drivers/media/video/tda8290.c:27:21: error: tda827x.h: No such file or directory drivers/media/video/tda8290.c:28:22: error: tda18271.h: No such file or directory drivers/media/video/tda8290.c:52: error: field 'cfg' has incomplete type drivers/media/video/tda8290.c: In function 'tda829x_find_tuner': drivers/media/video/tda8290.c:590: error: implicit declaration of function 'tda18271_attach' drivers/media/video/tda8290.c:598: error: implicit declaration of function 'tda827x_attach' Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Sascha Sommer authored
Adds autodetection support for the Cinergy200 USB and the VGear PocketTV. Whenever a usb device with generic empia em2800 usb ids is detected the device gets scanned for connected i2c devices. If the device list matches an em2800 device in the device list the model id gets changed accordingly. Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
Prevent the tda8295 from falsely being detected as a tda9887 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Sascha Sommer authored
attached patch adds support for the vgear pockettv. It seems to require a write to another register for audio to work. I checked my old cinergydrv and we did the same register write there. I therefore enabled it for all em2800 based devices. Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Sascha Sommer authored
The attached patch modifies the em28xx driver so that there can be ioctls from multiple different threads. This is necessary for capture apps like MPlayer that use different threads for capturing and channel tuning. Now the locking is only done for the ioctls that change properties of the device or access the i2c bus. It also removes some locks that look unnecessary: In em28xx_init_dev: the videodevice is not registered yet so nothing can access the hardware meanwhile, the device struct is not assigned to the interface yet so no race with disconnect is possible In em28xx_release_resources: it gets only called when dev->lock is already held Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
This patch adds a function to allow trying to detect boards that shares the generic IDs. The current detection method is based at eeprom checksum. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
- Television is now default; - Add HVR950 name at the entry. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Used scripts/Lindent + manual check + scripts/checkpatch.pl Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Trent Piepho authored
The ttpci Kconfig file has bugs that cause it to fail in certain Kconfig situations. The basic problem is that it selects certain drivers, but does not depend on the dependencies of those drivers. See http://article.gmane.org/gmane.comp.video.video4linux/35072 Using the Kconfig file also has some annoyances. For instance one can't turn off AV7110 support unless you go down several options and first turn off budget-patch support. Normally user selectable drivers are not forced on like this. The "AV7110 cards with Budget Patch" option is disabled if "Budget cards" isn't on. Normally a driver appears nested under a driver it depends on, but since drivers that don't depend on "Budget cards" are between the two options, the config programs can't display the tree correctly. The Makefile has an issue too. Some modules, ttpci-eeprom and budget-core, appear in the Makefile under several different config symbols. If more than one of these symbols is on, they will get added the to list of objects multiple times. The normal convention is to have a config symbol just the common object(s) and have the users of the that object either depend on or select that config symbol. This patch fixes all these issues. ttpci-eepom is under a new config symbol, and so is the budget-core module. The four different budget card types appear as sub-drivers under a main "SAA7146 DVB cards" option. Turning on budget-patch doesn't force AV7110. Drivers using SAA7146_VV have the necessary VIDEO_DEV dependency, so that it isn't possible to select SAA7146_VV without V4L being on. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Trent Piepho authored
Someone wasn't using the v4l-dvb commit scripts and so didn't run the automatic whitespace cleaner on their code. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Marco Schluessler authored
Remove V4L1 code. Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Marco Schluessler authored
remove wrong include <linux/videodev.h> Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
Alter the tuner_foo printk macros to indicate which module is generating the message. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
The tuner sub-module will usually log its type during its _attach() function, then tuner-core reports which type was attached when control is returned. In most cases, we expect to see the same message reported from both locations. We only need to see this second message if debug is enabled. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
This driver is used by the ASUS Falcon2 cx23416-based cards. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Douglas Schilling Landgraf authored
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Douglas Schilling Landgraf authored
zr364: make file_operations const Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-