- 10 Jul, 2009 8 commits
-
-
Krzysztof Helt authored
Remove call to the fb_set_par() before the register_framebuffer(). This fixes a problem with uninitialized the fb_info->mm_lock mutex introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap locking" Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: when ATTR_READONLY is set, only clear write bits on non-directories cifs: remove cifsInodeInfo->inUse counter cifs: convert cifs_get_inode_info and non-posix readdir to use cifs_iget [CIFS] update cifs version number cifs: add and use CIFSSMBUnixSetFileInfo for setattr calls cifs: make a separate function for filling out FILE_UNIX_BASIC_INFO cifs: rename CIFSSMBUnixSetInfo to CIFSSMBUnixSetPathInfo cifs: add pid of initiating process to spnego upcall info cifs: fix regression with O_EXCL creates and optimize away lookup cifs: add new cifs_iget function and convert unix codepath to use it
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) cxgb3: Fix crash caused by stashing wrong netdev_queue ixgbe: Fix coexistence of FCoE and Flow Director in 82599 memory barrier: adding smp_mb__after_lock net: adding memory barrier to the poll and receive callbacks netpoll: Fix carrier detection for drivers that are using phylib includecheck fix: include/linux, rfkill.h p54: tx refused but queue active Atheros Kconfig needs to be dependent on WLAN_80211 mac80211: fix docbook mac80211_hwsim: avoid NULL access ssb: Add support for 4318E b43: Add support for 4318E zd1211rw: adding SONY IFU-WLM2 (054c:0257) as a zd1211b device zd1211rw: 07b8:6001 is a ZD1211B r6040: bump driver version to 0.24 and date to 08 July 2009 r6040: restore MIER register correctly when IRQ line is shared ipv4: Fix fib_trie rebalancing, part 4 (root thresholds) davinci_emac: fix kernel oops when changing MAC address while interface is down igb: set lan id prior to configuring phy mac80211: minstrel: avoid accessing negative indices in rix_to_ndx() ...
-
Dave Jones authored
Looks like the change in ad361c98 wasn't compile tested. Signed-off-by:
Dave Jones <davej@redhat.com> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Roland Dreier authored
Commit c3a8c5b6 ("cxgb3: move away from LLTX") exposed a bug in how cxgb3 looks up the netdev_queue it stashes away in a qset during initialization. For multiport devices, the TX queue index it uses is offset by the first_qset index of each port. This leads to a crash once LLTX is removed, since hard_start_xmit is called with one TX queue lock held, while the TX reclaim timer task grabs a different (wrong) TX queue lock when it frees skbs. Fix this by removing the first_qset offset used to look up the TX queue passed into t3_sge_alloc_qset() from setup_sge_qsets(). Signed-off-by:
Roland Dreier <rolandd@cisco.com> Acked-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
-
Yi Zou authored
Fix coexistence of Fiber Channel over Ethernet (FCoE) and Flow Director (FDIR) in 82599 and remove the disabling of FDIR when FCoE is enabled. Currently, FDIR is turned off when FCoE is enabled under the assumption that FCoE is always enabled with DCB being turned on. However, FDIR does not have to be turned off all the time when FCoE is enabled since FCoE can be enabled without DCB being turned on, e.g., use link pause only. This patch makes sure that when DCB is turned on or off, FDIR is turned on or off correspondingly; and when FCoE is enabled, it does not disable FDIR, rather, it will have FDIR set up properly so FCoE and FDIR can coexist regardless of DCB being on or off. Signed-off-by:
Yi Zou <yi.zou@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Jiri Olsa authored
Adding smp_mb__after_lock define to be used as a smp_mb call after a lock. Making it nop for x86, since {read|write|spin}_lock() on x86 are full memory barriers. Signed-off-by:Jiri Olsa <jolsa@redhat.com> Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Jiri Olsa authored
Adding memory barrier after the poll_wait function, paired with receive callbacks. Adding fuctions sock_poll_wait and sk_has_sleeper to wrap the memory barrier. Without the memory barrier, following race can happen. The race fires, when following code paths meet, and the tp->rcv_nxt and __add_wait_queue updates stay in CPU caches. CPU1 CPU2 sys_select receive packet ... ... __add_wait_queue update tp->rcv_nxt ... ... tp->rcv_nxt check sock_def_readable ... { schedule ... if (sk->sk_sleep && waitqueue_active(sk->sk_sleep)) wake_up_interruptible(sk->sk_sleep) ... } If there was no cache the code would work ok, since the wait_queue and rcv_nxt are opposit to each other. Meaning that once tp->rcv_nxt is updated by CPU2, the CPU1 either already passed the tp->rcv_nxt check and sleeps, or will get the new value for tp->rcv_nxt and will return with new data mask. In both cases the process (CPU1) is being added to the wait queue, so the waitqueue_active (CPU2) call cannot miss and will wake up CPU1. The bad case is when the __add_wait_queue changes done by CPU1 stay in its cache, and so does the tp->rcv_nxt update on CPU2 side. The CPU1 will then endup calling schedule and sleep forever if there are no more data on the socket. Calls to poll_wait in following modules were ommited: net/bluetooth/af_bluetooth.c net/irda/af_irda.c net/irda/irnet/irnet_ppp.c net/mac80211/rc80211_pid_debugfs.c net/phonet/socket.c net/rds/af_rds.c net/rfkill/core.c net/sunrpc/cache.c net/sunrpc/rpc_pipe.c net/tipc/socket.c Signed-off-by:
-
- 09 Jul, 2009 12 commits
-
-
Jeff Layton authored
cifs: when ATTR_READONLY is set, only clear write bits on non-directories On windows servers, ATTR_READONLY apparently either has no meaning or serves as some sort of queue to certain applications for unrelated behavior. This MS kbase article has details: http://support.microsoft.com/kb/326549/ Don't clear the write bits directory mode when ATTR_READONLY is set. Reported-by: pouchat@peewiki.net Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Steve French <sfrench@us.ibm.com>
-
Jeff Layton authored
cifs: remove cifsInodeInfo->inUse counter It was purported to be a refcounter of some sort, but was never used that way. It never served any purpose that wasn't served equally well by the I_NEW flag. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Jeff Layton authored
cifs: convert cifs_get_inode_info and non-posix readdir to use cifs_iget Rather than allocating an inode and filling it out, have cifs_get_inode_info fill out a cifs_fattr and call cifs_iget. This means a pretty hefty reorganization of cifs_get_inode_info. For the readdir codepath, add a couple of new functions for filling out cifs_fattr's from different FindFile response infolevels. Finally, remove cifs_new_inode since there are no more callers. Signed-off-by:
-
Steve French authored
Signed-off-by: -
Jeff Layton authored
cifs: add and use CIFSSMBUnixSetFileInfo for setattr calls When there's an open filehandle, SET_FILE_INFO is apparently preferred over SET_PATH_INFO. Add a new variant that sets a FILE_UNIX_INFO_BASIC infolevel via SET_FILE_INFO and switch cifs_setattr_unix to use the new call when there's an open filehandle available. Signed-off-by:
-
Jeff Layton authored
cifs: make a separate function for filling out FILE_UNIX_BASIC_INFO The SET_FILE_INFO variant will need to do the same thing here. Break this code out into a separate function that both variants can call. Signed-off-by:
-
Jeff Layton authored
cifs: rename CIFSSMBUnixSetInfo to CIFSSMBUnixSetPathInfo ...in preparation of adding a SET_FILE_INFO variant. Signed-off-by:
-
Jeff Layton authored
cifs: add pid of initiating process to spnego upcall info This will allow the upcall to poke in /proc/<pid>/environ and get the value of the $KRB5CCNAME env var for the process. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix compile failure in cpufreq.c
-
Anton Vorontsov authored
Using early netconsole and gianfar driver this error pops up: netconsole: timeout waiting for carrier It appears that net/core/netpoll.c:netpoll_setup() is using cond_resched() in a loop waiting for a carrier. The thing is that cond_resched() is a no-op when system_state != SYSTEM_RUNNING, and so drivers/net/phy/phy.c's state_queue is never scheduled, therefore link detection doesn't work. I belive that the main problem is in cond_resched()[1], but despite how the cond_resched() story ends, it might be a good idea to call msleep(1) instead of cond_resched(), as suggested by Andrew Morton. [1] http://lkml.org/lkml/2009/7/7/463Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
-
-
Roland Dreier authored
Commit ad361c98 ("Remove multiple KERN_ prefixes from printk formats") broke the build for fealnx because it added some "printk(PR_CONT ..." calls, when PR_CONT doesn't exist; it should be "printk(KERN_CONT ..." Signed-off-by:
-
- 08 Jul, 2009 20 commits
-
-
Dave Jones authored
managed_policy is out of scope for the non-smp case. Declare it locally where used (twice) Signed-off-by: -
Jeff Layton authored
cifs: fix regression with O_EXCL creates and optimize away lookup Signed-off-by:
Shirish Pargaonkar <shirishp@gmail.com> CC: Stable Kernel <stable@kernel.org> Signed-off-by:
-
Krzysztof Helt authored
Remove not needed locking of the fb_info->mm_lock mutex before a frambuffer is registered. This fixes a problem with uninitialized the fb_info->mm_lock mutex introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap locking" Signed-off-by:
-
Krzysztof Helt authored
Remove call to the fsl_diu_set_par before the register_framebuffer(). This fixes a problem with uninitialized the fb_info->mm_lock mutex introduced by the commit 537a1bf0 " fbdev: add mutex for fb_mmap locking" Signed-off-by:
"Kai Jiang" <b18973@freescale.com> Signed-off-by:
-
Jaswinder Singh Rajput authored
fix the following 'make includecheck' warning: include/linux/rfkill.h: linux/types.h is included more than once. Signed-off-by:
Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
In the mainline kernel, p54usb will fail because the TX queue length can become < 0. This problem has been reported as Bugzilla #13725. The failure is expressed by the following message in the logs: WARNING: at net/mac80211/tx.c:1325 ieee80211_tx+0x23c/0x298 [mac80211]() Hardware name: HP Pavilion dv2700 Notebook PC tx refused but queue active This problem has been recently observed in the wireless-testing tree, where a full solution is being tested. That fix is too invasive for 2.6.31-rcX, but the simple change supplied here will prevent the failure. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Jay Sternberg authored
Atheros top level menu needs a "depends WLAN_80211" to properly indent within menuconfig and xconfig interfaces. This is purely a visual issue but it effects all subsequent drivers. The issue is the top level menu does not include a dependency on WLAN_80211 so within the tree structure, Atheros is at the same level as WLAN_80211 but when WLAN_80211 collapsed, the menu disappears along with all subsequent drives, so it is really a subordinate. Signed-off-by:
Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by:
-
Johannes Berg authored
These two functions no longer exist in mac80211, so trying to insert them generates warnings in the document. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Johannes Berg authored
There's a race condition -- started can be set to true before channel is set due to the way mac80211 callbacks currently work (->start should probably pass the channel we would like to have initially). For now simply add a check to hwsim to avoid dereferencing the NULL channel pointer. Signed-off-by:
-
Clyde McPherson authored
Added support for the Broadcom 4318E chipset on PCMCIA/CF cards. The 4318E can do 802.11A/B/G, only B and G mode are supported in b43. Signed-off-by:
Clyde McPherson <ccmcphe@verizon.net> Signed-off-by:
-
Clyde McPherson authored
Added support for the Broadcom 4318E chipset on PCMCIA/CF cards. The 4318E can do 802.11A/B/G, only B and G mode are supported in b43. Signed-off-by:
-
Hin-Tak Leung authored
Yevgen Kotikov reported success on the sourceforge zd1211-devs list with the following details: Brand/retail: SONY IFU-WLM2 USB-IDs: Vendor: 0x054C Device: 0x0257 chip ID: zd1211b chip 054c:0257 v4802 high 00-0b-6b AL2230_RF pa0 ----- FCC ID: unknown Signed-off-by:
Hin-Tak Leung <htl10@users.sourceforge.net> Tested-by:
Yevgen Kotikov <yevgen.kotikov@gmail.com> Signed-off-by:
-
Pascal Terjan authored
On a shuttle machine here we got 07b8:6001 device, handled by zd1211rw, which does not work. Scanning is OK but association does not work, we get "direct probe to AP xxx timed out" It appears that this simple patch makes the device work perfectly. This id was already there in initial import of the driver so I don't know if it has ever been working as ZD1211 (which would mean they changed it and kept the id :( ). Signed-off-by:
Pascal Terjan <pterjan@mandriva.com> Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
-
Florian Fainelli authored
When the r6040 device IRQ line is shared we will enter the driver interrupt service routine, mask off the device interrupt enable register (MIER) and return with IRQ_NONE, we would then leave the device with interrupts disabled, this patch fixes that issue. Reported-by:
Steve Holland <sdh4@iastate.edu> Signed-off-by:
Joe Chou <joe.chou@rdc.com.tw> Signed-off-by:
-
Jarek Poplawski authored
Pawel Staszewski wrote: <blockquote> Some time ago i report this: http://bugzilla.kernel.org/show_bug.cgi?id=6648 and now with 2.6.29 / 2.6.29.1 / 2.6.29.3 and 2.6.30 it back dmesg output: oprofile: using NMI interrupt. Fix inflate_threshold_root. Now=15 size=11 bits ... Fix inflate_threshold_root. Now=15 size=11 bits cat /proc/net/fib_triestat Basic info: size of leaf: 40 bytes, size of tnode: 56 bytes. Main: Aver depth: 2.28 Max depth: 6 Leaves: 276539 Prefixes: 289922 Internal nodes: 66762 1: 35046 2: 13824 3: 9508 4: 4897 5: 2331 6: 1149 7: 5 9: 1 18: 1 Pointers: 691228 Null ptrs: 347928 Total size: 35709 kB </blockquote> It seems, the current threshold for root resizing is too aggressive, and it causes misleading warnings during big updates, but it might be also responsible for memory problems, especially with non-preempt configs, when RCU freeing is delayed long after call_rcu. It should be also mentioned that because of non-atomic changes during resizing/rebalancing the current lookup algorithm can miss valid leaves so it's additional argument to shorten these activities even at a cost of a minimally longer searching. This patch restores values before the patch "[IPV4]: fib_trie root node settings", commit: 965ffea4 from v2.6.22. Pawel's report: <blockquote> I dont see any big change of (cpu load or faster/slower routing/propagating routes from bgpd or something else) - in avg there is from 2% to 3% more of CPU load i dont know why but it is - i change from "preempt" to "no preempt" 3 times and check this my "mpstat -P ALL 1 30" always avg cpu load was from 2 to 3% more compared to "no preempt" [...] cat /proc/net/fib_triestat Basic info: size of leaf: 20 bytes, size of tnode: 36 bytes. Main: Aver depth: 2.44 Max depth: 6 Leaves: 277814 Prefixes: 291306 Internal nodes: 66420 1: 32737 2: 14850 3: 10332 4: 4871 5: 2313 6: 942 7: 371 8: 3 17: 1 Pointers: 599098 Null ptrs: 254865 Total size: 18067 kB </blockquote> According to this and other similar reports average depth is slightly increased (~0.2), and root nodes are shorter (log 17 vs. 18), but there is no visible performance decrease. So, until memory handling is improved or added parameters for changing this individually, this patch resets to safer defaults. Reported-by:
Pawel Staszewski <pstaszewski@itcare.pl> Reported-by:
Jorge Boncompte [DTI2] <jorge@dti2.net> Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Tested-by:
-
Pablo Bitton authored
Check that network interface is running before changing its MAC address. Otherwise, rxch is accessed when it's NULL - causing a kernel oops. Moreover, check that the new MAC address is valid. Signed-off-by:
Pablo Bitton <pablo.bitton@gmail.com> Signed-off-by:
Chaithrika U S <chaithrika@ti.com> Tested-by:
-
Alexander Duyck authored
The igb driver was defaulting to using the lock for pci-e function 0 for all of the phys due to the fact that the lan id was not being set prior to initialization. This change makes it so that the function id is set prior to checking for the phy id. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
-
Yinghai Lu authored
Alex found that specjbb2005 still can not run with hugepages on an x86-64 machine. This only happens when numa is not compiled in. The root cause: node_set_state will not set it back for us in that case, so don't clear that when numa is not select in config [ v2: use node_clear_state instead ] Reported-and-Tested-by:
Alex Shi <alex.shi@intel.com> Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Reviewed-by:
Christoph Lameter <cl@linux-foundation.org> Signed-off-by:
-
Joe Perches authored
Commit 5fd29d6c ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
