- 21 Jul, 2008 40 commits
-
-
Anton Vorontsov authored
If the net queue has not been started, we'll get this nice oops and non-working ethernet: PHY: 0:01 - Link is Up - 1000/Full ------------[ cut here ]------------ kernel BUG at net/core/dev.c:1328! Oops: Exception in kernel mode, sig: 5 [#1] MPC837x RDB Modules linked in: NIP: c02544a0 LR: c01a17d0 CTR: c01a16ac REGS: cf837e40 TRAP: 0700 Not tainted (2.6.26-05253-g14b395e3) MSR: 00021032 <ME,IR,DR> CR: 22042044 XER: 00000000 TASK = cf819400[5] 'events/0' THREAD: cf836000 GPR00: c01a17d0 cf837ef0 cf819400 c03d8d08 cf8469a0 00000064 00000000 00000000 GPR08: c03d8d08 00000001 00000001 cf899ba0 22044044 00000000 0fffd000 00000000 GPR16: 0fff3028 0fff6cf0 00000000 0fff8390 0ff494a0 00000004 00000000 00000000 GPR24: c0361a00 00001058 cf9f6600 00009032 cf846800 cf846b80 00000001 00000014 NIP [c02544a0] __netif_schedule+0x28/0x8c LR [c01a17d0] adjust_link+0x124/0x1cc Call Trace: [cf837ef0] [c03fb3a0] 0xc03fb3a0 (unreliable) [cf837f10] [c01a17d0] adjust_link+0x124/0x1cc [cf837f40] [c01a8e28] phy_state_machine+0x2e0/0x448 [cf837f60] [c0040254] run_workqueue+0xc8/0x168 [cf837f90] [c00408d8] worker_thread+0x70/0xd0 [cf837fd0] [c0044630] kthread+0x48/0x84 [cf837ff0] [c0012610] kernel_thread+0x44/0x60 Instruction dump: 7c0803a6 4e800020 3d20c03e 9421ffe0 7c0802a6 7c681b78 39298d08 7c694a78 7d290034 90010024 bfa10014 5529d97e <0f090000> 39600002 38030024 7d200028 ---[ end trace 13dfd73ee42d0c30 ]--- Since the driver is using phylib (which is doing netif_carrier_on/off()), we should simply remove netif_tx_schedule_all() from adjust_link(). Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Based upon a bug report by Alexey Dobriyan, the patch is also tested by him and confirmed to fix the problem. Packet flow during link state events should not be done by waking and stopping the TX queue anyways, that is handled transparently by netif_carrier_{on,off}(). So, remove the netif_{wake,stop}_queue() calls in the link check code, and add the necessary netif_start_queue() call to atl1_up(). Signed-off-by: -
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
* 'for-2.6.27' of git://linux-nfs.org/~bfields/linux: (51 commits) nfsd: nfs4xdr.c do-while is not a compound statement nfsd: Use C99 initializers in fs/nfsd/nfs4xdr.c lockd: Pass "struct sockaddr *" to new failover-by-IP function lockd: get host reference in nlmsvc_create_block() instead of callers lockd: minor svclock.c style fixes lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_lock lockd: eliminate duplicate nlmsvc_lookup_host call from nlmsvc_testlock lockd: nlm_release_host() checks for NULL, caller needn't file lock: reorder struct file_lock to save space on 64 bit builds nfsd: take file and mnt write in nfs4_upgrade_open nfsd: document open share bit tracking nfsd: tabulate nfs4 xdr encoding functions nfsd: dprint operation names svcrdma: Change WR context get/put to use the kmem cache svcrdma: Create a kmem cache for the WR contexts svcrdma: Add flush_scheduled_work to module exit function svcrdma: Limit ORD based on client's advertised IRD svcrdma: Remove unused wait q from svcrdma_xprt structure svcrdma: Remove unneeded spin locks from __svc_rdma_free svcrdma: Add dma map count and WARN_ON ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: gpu: re-order GPU subdirectory vs char for AGP vs DRM startup.
-
David Miller authored
Reported by Linus. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: pkt_sched: Fix build with NET_SCHED disabled.
-
git://git.o-hand.com/linux-mfdLinus Torvalds authored
* 'for-linus' of git://git.o-hand.com/linux-mfd: mfd: let asic3 use mem resource instead of bus_shift mfd: remove DS1WM register definitions from asic3.h mfd: add ASIC3_CONFIG_GPIO templates mfd: fix the asic3 irq demux code mfd: asic3 should depend on gpiolib mfd: fix asic3 config array initialisation mfd: move asic3 probe functions into __init section mfd: Use uppercase only for asic3 macros and defines mfd: use dev_* macros for asic3 debugging mfd: New asic3 gpio configuration code mfd: asic3 children platform data removal mfd: asic3 gpiolib support
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (277 commits) V4L/DVB (8415): gspca: Infinite loop in i2c_w() of etoms. V4L/DVB (8414): videodev/cx18: fix get_index bug and error-handling lock-ups V4L/DVB (8411): videobuf-dma-contig.c: fix 64-bit build for pre-2.6.24 kernels V4L/DVB (8410): sh_mobile_ceu_camera: fix 64-bit compiler warnings V4L/DVB (8397): video: convert select VIDEO_ZORAN_ZR36060 into depends on V4L/DVB (8396): video: Fix Kbuild dependency for VIDEO_IR_I2C V4L/DVB (8395): saa7134: Fix Kbuild dependency of ir-kbd-i2c V4L/DVB (8394): ir-common: CodingStyle fix: move EXPORT_SYMBOL_GPL to their proper places V4L/DVB (8393): media/video: Fix depencencies for VIDEOBUF V4L/DVB (8392): media/Kconfig: Convert V4L1_COMPAT select into "depends on" V4L/DVB (8390): videodev: add comment and remove magic number. V4L/DVB (8389): videodev: simplify get_index() V4L/DVB (8387): Some cosmetic changes V4L/DVB (8381): ov7670: fix compile warnings V4L/DVB (8380): saa7115: use saa7115_auto instead of saa711x as the autodetect driver name. V4L/DVB (8379): saa7127: Make device detection optional V4L/DVB (8378): cx18: move cx18_av_vbi_setup to av-core.c and rename to cx18_av_std_setup V4L/DVB (8377): ivtv/cx18: ensure the default control values are correct V4L/DVB (8376): cx25840: move cx25840_vbi_setup to core.c and rename to cx25840_std_setup V4L/DVB (8374): gspca: No conflict of 0c45:6011 with the sn9c102 driver. ...
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (21 commits) [MIPS] Remove unused maltasmp.h. [MIPS] Remove unused saa9730_uart.h. [MIPS] Rename MIPS sys_pipe syscall entry point to something MIPS-specific. [MIPS] 32-bit compat: Delete unused sys_truncate64 and sys_ftruncate64. [MIPS] TXx9: Fix some sparse warnings [MIPS] TXx9: Add 64-bit support [MIPS] TXx9: Cleanups for 64-bit support [MIPS] Cobalt: Fix I/O port resource range [MIPS] don't leak setup_early_printk() in userspace header [MIPS] Remove include/asm-mips/mips-boards/sead{,int}.h [MIPS] Remove asm-mips/mips-boards/atlas{,int}.h [MIPS] mips/sgi-ip22/ip28-berr.c: fix the build [MIPS] TXx9: Miscellaneous build fixes [MIPS] Routerboard 532: Support for base system [MIPS] IP32: Use common SGI button driver [MIPS] IP22: Use common SGI button driver [MIPS] IP22, IP28: Fix merge bug [MIPS] Tinker with constraints in <asm/atomic.h> to fix build error. [MIPS] Add missing prototypes to asm/page.h [MIPS] Fix missing prototypes in asm/fpu.h ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvmLinus Torvalds authored
* 'kvm-updates-2.6.27' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (70 commits) KVM: Adjust smp_call_function_mask() callers to new requirements KVM: MMU: Fix potential race setting upper shadow ptes on nonpae hosts KVM: x86 emulator: emulate clflush KVM: MMU: improve invalid shadow root page handling KVM: MMU: nuke shadowed pgtable pages and ptes on memslot destruction KVM: Prefix some x86 low level function with kvm_, to avoid namespace issues KVM: check injected pic irq within valid pic irqs KVM: x86 emulator: Fix HLT instruction KVM: Apply the kernel sigmask to vcpus blocked due to being uninitialized KVM: VMX: Add ept_sync_context in flush_tlb KVM: mmu_shrink: kvm_mmu_zap_page requires slots_lock to be held x86: KVM guest: make kvm_smp_prepare_boot_cpu() static KVM: SVM: fix suspend/resume support KVM: s390: rename private structures KVM: s390: Set guest storage limit and offset to sane values KVM: Fix memory leak on guest exit KVM: s390: dont allocate dirty bitmap KVM: move slots_lock acquision down to vapic_exit KVM: VMX: Fake emulate Intel perfctr MSRs KVM: VMX: Fix a wrong usage of vmcs_config ...
-
David S. Miller authored
The stab bits can't be referenced uniless the full packet scheduler layer is enabled. Reported by Stephen Rothwell. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (1232 commits) iucv: Fix bad merging. net_sched: Add size table for qdiscs net_sched: Add accessor function for packet length for qdiscs net_sched: Add qdisc_enqueue wrapper highmem: Export totalhigh_pages. ipv6 mcast: Omit redundant address family checks in ip6_mc_source(). net: Use standard structures for generic socket address structures. ipv6 netns: Make several "global" sysctl variables namespace aware. netns: Use net_eq() to compare net-namespaces for optimization. ipv6: remove unused macros from net/ipv6.h ipv6: remove unused parameter from ip6_ra_control tcp: fix kernel panic with listening_get_next tcp: Remove redundant checks when setting eff_sacks tcp: options clean up tcp: Fix MD5 signatures for non-linear skbs sctp: Update sctp global memory limit allocations. sctp: remove unnecessary byteshifting, calculate directly in big-endian sctp: Allow only 1 listening socket with SO_REUSEADDR sctp: Do not leak memory on multiple listen() calls sctp: Support ipv6only AF_INET6 sockets. ...
-
git://www.jni.nu/crisLinus Torvalds authored
* 'for-linus' of git://www.jni.nu/cris: [CRISv10] Clean up compressed/misc.c [CRISv10] Correct whitespace damage. [CRIS] Correct definition of subdirs for install_headers. [CRIS] Correct image makefiles to allow using a separate OBJ-directory. [CRIS] Build fixes for compressed and rescue images for v10 and v32: It looks at least odd to apply spin_unlock to a mutex. cris: compile fixes for 2.6.26-rc5
-
Geert Uytterhoeven authored
On recent kernels, I get the following error when using an initrd: | initrd overwritten (0x00b78000 < 0x07668000) - disabling it. My Amiga 4000 has 12 MiB of RAM at physical address 0x07400000 (virtual 0x00000000). The initrd is located at the end of RAM: 0x00b78000 - 0x00c00000 (virtual). The overwrite test compares the (virtual) initrd location to the (physical) first available memory location, which fails. This patch converts initrd_start to a page frame number, so it can safely be compared with min_low_pfn. Before the introduction of discontiguous memory support on m68k (12d810c1), min_low_pfn was just left untouched by the m68k-specific code (zero, I guess), and everything worked fine. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Akinobu Mita authored
dio_bus_match() can use dio_match_device(). Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Julia Lawall authored
As noted by Akinobu Mita in patch b1fceac2, alloc_bootmem and related functions never return NULL and always return a zeroed region of memory. Thus a NULL test or memset after calls to these functions is unnecessary. This was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; statement S; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) .. when != E ( - BUG_ON (E == NULL); | - if (E == NULL) S ) @@ expression E,E1; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) .. when != E - memset(E,0,E1); // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
As noted by Akinobu Mita in patch b1fceac2, alloc_bootmem and related functions never return NULL and always return a zeroed region of memory. Thus a NULL test or memset after calls to these functions is unnecessary. This was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; statement S; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) .. when != E ( - BUG_ON (E == NULL); | - if (E == NULL) S ) @@ expression E,E1; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) .. when != E - memset(E,0,E1); // </smpl> Signed-off-by:
-
Geert Uytterhoeven authored
Looking at older kernel sources the APOLLO_ELPLUS option was added somewhere during kernel 2.1, but even kernel 2.2.0 does not contain any driver that would be enabled through it... Reported-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Adrian Bunk authored
It seems the driver was removed back in kernel 2.3 but the options were forgotten. Reported-by:
-
Adrian Bunk authored
When the driver was removed back in 2002 the option was forgotten. Reported-by:
-
Geert Uytterhoeven authored
Add the missing call to apollo_parse_bootinfo(), which had been lost from a big Apollo support patch by Peter De Schrijver in 1999. Thanks to Adrian Bunk for noticing! Signed-off-by:
-
Adrian Bunk authored
m68k: remove stale ARCH_SUN4 #define Signed-off-by:
-
Adrian Bunk authored
This patch contains the following possible cleanups: - make the following needlessly global code static: - config.c: sun3_bootmem_alloc() - config.c: sun3_sched_init() - dvma.c: dvma_page() - idprom.c: struct Sun_Machines[] - mmu_emu.c: struct ctx_alloc[] - sun3dvma.c: iommu_use[] - sun3ints.c: led_pattern[] - remove the unused sbus.c Signed-off-by:
-
Adrian Bunk authored
This patch makes the following needlessly global functions static: - q40_reset() - q40_halt() - q40_disable_irqs() - q40_gettimeoffset() - q40_hwclk() - q40_get_ss() - q40_set_clock_mmss() Signed-off-by:
-
Adrian Bunk authored
This patch contains the following possible cleanups: - make the following needlessly global code (always) static: - baboon.c: struct baboon - baboon.c: baboon_irq() - config.c: mac_orig_videoaddr - config.c: mac_identify() - config.c: mac_report_hardware() - config.c: mac_debug_console_write() - config.c: mac_sccb_console_write() - config.c: mac_scca_console_write() - config.c: mac_init_scc_port() - oss.c: oss_irq() - oss.c: oss_nubus_irq() - psc.c: psc_debug_dump() - psc.c: psc_dma_die_die_die() - via.c: rbv_clear - remove the unused bootparse.c - #if 0 the following unused functions: - config.c: mac_debugging_short() - config.c: mac_debugging_long() - remove the following unused code: - config.c: mac_bisize - config.c: mac_env - config.c: mac_SCC_init_done - config.c: mac_SCC_reset_done - config.c: mac_init_scca_port() - config.c: mac_init_sccb_port() Signed-off-by:
-
Adrian Bunk authored
This patch contains the following possible cleanups: - make the following needlessly global functions (always) static: - atari_mfp_console_write() - atari_scc_console_write() - atari_midi_console_write() - atari_init_mfp_port() - atari_init_scc_port() - atari_init_midi_port() - #if 0 the following unused functions: - atari_mfp_console_wait_key() - atari_scc_console_wait_key() - atari_midi_console_wait_key() - remove the following unused variables: - atari_MFP_init_done - atari_SCC_init_done Signed-off-by:
-
Adrian Bunk authored
This patch contains the following possible cleanups: - amiints.c: add a proper prototype for amiga_init_IRQ() in include/asm-m68k/amigaints.h - make the following needlessly global code static: - config.c: amiga_model - config.c: amiga_psfreq - config.c: amiga_serial_console_write() - #if 0 the following unused functions: - config.c: amiga_serial_puts() - config.c: amiga_serial_console_wait_key() - config.c: amiga_serial_gets() - remove the following unused variable: - config.c: amiga_masterclock Signed-off-by: -
Adrian Bunk authored
This patch fixes the following build error: <-- snip --> .. Building modules, stage 2. MODPOST 1203 modules ERROR: "c2p" [drivers/video/amifb.ko] undefined! .. make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by:
-
Adrian Bunk authored
This patch fixes the following build error: <-- snip --> .. Building modules, stage 2. MODPOST 1203 modules ERROR: "amiga_vblank" [drivers/video/amifb.ko] undefined! .. make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by:
-
Adrian Bunk authored
This patch adds the missing MODULE_LICENSE("GPL"). Reported-by: -
Geert Uytterhoeven authored
Register the Atari-specific video modes with sysfs, so you can see them in /sys/class/graphics/fb0/modes and change the video mode by writing to /sys/class/graphics/fb0/mode. Signed-off-by:
-
Geert Uytterhoeven authored
Register the Amiga-specific video modes with sysfs, so you can see them in /sys/class/graphics/fb0/modes and change the video mode by writing to /sys/class/graphics/fb0/mode. Signed-off-by:
-
akinobu.mita@gmail.com authored
zorro: use memory_read_from_buffer Signed-off-by:
-
Robert P. J. Day authored
ZORRO: Replace deprecated __initcall with equivalent device_initcall. Signed-off-by:
-
Adrian Bunk authored
Unless I miss something that's code for a sparc machine even the sparc code no longer supports that got copied to m68k when these files were copied. Signed-off-by:
-
Adrian Bunk authored
It seems to match the intention behind multi_defconfig to make it the default defconfig. Signed-off-by:
-
Mathieu Desnoyers authored
> This is a no-no for those archs that still use -traditional. > > I dunno if this is a problem for you at the moment and the > > right fix is anyway to nuke -traditional. > > > > Sam Signed-off-by:
Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by:
-
Geert Uytterhoeven authored
Allow no CPU/platform type for allnoconfig - Provide a dummy value for FPSTATESIZE if no CPU type was selected - Provide a dummy value for NR_IRQS if no platform type was selected - Warn the user if no CPU or platform type was selected Note: you still cannot build an allnoconfig kernel, as CONFIG_SWAP=n doesn't build and we cannot easily fix that (http://groups.google.com/group/linux.kernel/browse_thread/thread/d430c78b07e1827b) Signed-off-by:
-
Cyrill Gorcunov authored
This patch includes page.h header into linker script that allow us to use PAGE_SIZE macro instead of numeric constant Signed-off-by:
Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
According to the tests in do_initcalls(), the proper error code in case no device is found is -ENODEV, not -ENXIO or -EIO. Signed-off-by:
-
