Add a new mm function apply_to_page_range() which applies a given function to
every pte in a given virtual address range in a given mm structure.  This is a
generic alternative to cut-and-pasting the Linux idiomatic pagetable walking
code in every place that a sequence of PTEs must be accessed.

Although this interface is intended to be useful in a wide range of
situations, it is currently used specifically by several Xen subsystems, for
example: to ensure that pagetables have been allocated for a virtual address
range, and to construct batched special pagetable update requests to map I/O
memory (in ioremap()).

[akpm@linux-foundation.org: fix warning, unpleasantly]
Signed-off-by: Ian Pratt <ian.pratt@xensource.com>
Signed-off-by: Christian Limpach <Christian.Limpach@cl.cam.ac.uk>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Matt Mackall <mpm@waste.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

serial_core, use pr_debug
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The MPSC serial driver assumes that interrupt is always on to pick up the
DMA transmit ops that aren't submitted while the DMA engine is active.
However when irqs are off for a period of time such as operations under
kernel crash dump console messages do not show up due to additional DMA ops
are being dropped.  This makes console writes to process through all the tx
DMAs queued up before submitting a new request.

Also, the current locking mechanism does not protect the hardware registers
and ring buffer when a printk is done during the serial write operations.
The additional per port transmit lock provides a finer granular locking and
protects registers being clobbered while printks are nested within UART
writes.
Signed-off-by: Dave Jiang <djiang@mvista.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

At present, the serial core always allows setserial in userspace to change the
port address, irq and base clock of any serial port.  That makes sense for
legacy ISA ports, but not for (say) embedded ns16550 compatible serial ports
at peculiar addresses.  In these cases, the kernel code configuring the ports
must know exactly where they are, and their clocking arrangements (which can
be unusual on embedded boards).  It doesn't make sense for userspace to change
these settings.

Therefore, this patch defines a UPF_FIXED_PORT flag for the uart_port
structure.  If this flag is set when the serial port is configured, any
attempts to alter the port's type, io address, irq or base clock with
setserial are ignored.

In addition this patch uses the new flag for on-chip serial ports probed in
arch/powerpc/kernel/legacy_serial.c, and for other hard-wired serial ports
probed by drivers/serial/of_serial.c.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add support for the integrated serial ports of the MIPS RM9122 processor
and its relatives.

The patch also does some whitespace cleanup.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Serial driver patch for the PMC-Sierra MSP71xx devices.

There are three different fixes:

1 Fix for DesignWare APB THRE errata: In brief, this is a non-standard
  16550 in that the THRE interrupt will not re-assert itself simply by
  disabling and re-enabling the THRI bit in the IER, it is only re-enabled
  if a character is actually sent out.

  It appears that the "8250-uart-backup-timer.patch" in the "mm" tree
  also fixes it so we have dropped our initial workaround.  This patch now
  needs to be applied on top of that "mm" patch.

2 Fix for Busy Detect on LCR write: The DesignWare APB UART has a feature
  which causes a new Busy Detect interrupt to be generated if it's busy
  when the LCR is written.  This fix saves the value of the LCR and
  rewrites it after clearing the interrupt.

3 Workaround for interrupt/data concurrency issue: The SoC needs to
  ensure that writes that can cause interrupts to be cleared reach the UART
  before returning from the ISR.  This fix reads a non-destructive register
  on the UART so the read transaction completion ensures the previously
  queued write transaction has also completed.
Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

PCI drivers have the new_id file in sysfs which allows new IDs to be added
at runtime.  The advantage is to avoid re-compilation of a driver that
works for a new device, but it's ID table doesn't contain the new device.
This mechanism is only meant for testing, after the driver has been tested
successfully, the ID should be added in source code so that new revisions
of the kernel automatically detect the device.

The implementation follows the PCI implementation. The interface is documented
in Documentation/pcmcia/driver.txt. Computations should be done in userspace,
so the sysfs string contains the raw structure members for matching.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is a minor correctness fix: since the at91_cf driver probe() routine
is in the init section, it should use platform_driver_probe() instead of
leaving that pointer around in the driver struct after init section
removal.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This introduce krealloc() that reallocates memory while keeping the contents
unchanged.  The allocator avoids reallocation if the new size fits the
currently used cache.  I also added a simple non-optimized version for
mm/slob.c for compatibility.

[akpm@linux-foundation.org: fix warnings]
Acked-by: Josef Sipek <jsipek@fsl.cs.sunysb.edu>
Acked-by: Matt Mackall <mpm@selenic.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This was broken.  It adds complexity, for no good reason.  Rather than
separate __pa() and __pa_symbol(), we should deprecate __pa_symbol(),
and preferably __pa() too - and just use "virt_to_phys()" instead, which
is more readable and has nicer semantics.

However, right now, just undo the separation, and make __pa_symbol() be
the exact same as __pa().  That fixes the bugs this patch introduced,
and we can do the fairly obvious cleanups later.

Do the new __phys_addr() function (which is now the actual workhorse for
the unified __pa()/__pa_symbol()) as a real external function, that way
all the potential issues with compile/link-time optimizations of
constant symbol addresses go away, and we can also, if we choose to, add
more sanity-checking of the argument.

Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (38 commits)
  kconfig: fix mconf segmentation fault
  kbuild: enable use of code from a different dir
  kconfig: error out if recursive dependencies are found
  kbuild: scripts/basic/fixdep segfault on pathological string-o-death
  kconfig: correct minor typo in Kconfig warning message.
  kconfig: fix path to modules.txt in Kconfig help
  usr/Kconfig: fix typo
  kernel-doc: alphabetically-sorted entries in index.html of 'htmldocs'
  kbuild: be more explicit on missing .config file
  kbuild: clarify the creation of the LOCALVERSION_AUTO string.
  kbuild: propagate errors from find in scripts/gen_initramfs_list.sh
  kconfig: refer to qt3 if we cannot find qt libraries
  kbuild: handle compressed cpio initramfs-es
  kbuild: ignore section mismatch warning for references from .paravirtprobe to .init.text
  kbuild: remove stale comment in modpost.c
  kbuild/mkuboot.sh: allow spaces in CROSS_COMPILE
  kbuild: fix make mrproper for Documentation/DocBook/man
  kbuild: remove kconfig binaries during make mrproper
  kconfig/menuconfig: do not hardcode '.config'
  kbuild: override build timestamp & version
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (66 commits)
  KVM: Remove unused 'instruction_length'
  KVM: Don't require explicit indication of completion of mmio or pio
  KVM: Remove extraneous guest entry on mmio read
  KVM: SVM: Only save/restore MSRs when needed
  KVM: fix an if() condition
  KVM: VMX: Add lazy FPU support for VT
  KVM: VMX: Properly shadow the CR0 register in the vcpu struct
  KVM: Don't complain about cpu erratum AA15
  KVM: Lazy FPU support for SVM
  KVM: Allow passing 64-bit values to the emulated read/write API
  KVM: Per-vcpu statistics
  KVM: VMX: Avoid unnecessary vcpu_load()/vcpu_put() cycles
  KVM: MMU: Avoid heavy ASSERT at non debug mode.
  KVM: VMX: Only save/restore MSR_K6_STAR if necessary
  KVM: Fold drivers/kvm/kvm_vmx.h into drivers/kvm/vmx.c
  KVM: VMX: Don't switch 64-bit msrs for 32-bit guests
  KVM: VMX: Reduce unnecessary saving of host msrs
  KVM: Handle guest page faults when emulating mmio
  KVM: SVM: Report hardware exit reason to userspace instead of dmesg
  KVM: Retry sleeping allocation if atomic allocation fails
  ...

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (82 commits)
  [ARM] Add comments marking in-use ptrace numbers
  [ARM] Move syscall saving out of the way of utrace
  [ARM] 4360/1: S3C24XX: regs-udc.h remove unused macro
  [ARM] 4358/1: S3C24XX: mach-qt2410.c: remove linux/mmc/protocol.h header
  [ARM] mm 10: allow memory type to be specified with ioremap
  [ARM] mm 9: add additional device memory types
  [ARM] mm 8: define mem_types table L1 bit 4 to be for ARMv6
  [ARM] iop: add missing parens in macro
  [ARM] mm 7: remove duplicated __ioremap() prototypes
  ARM: OMAP: fix OMAP1 mpuio suspend/resume oops
  ARM: OMAP: MPUIO wake updates
  ARM: OMAP: speed up gpio irq handling
  ARM: OMAP: plat-omap changes for 2430 SDP
  ARM: OMAP: gpio object shrinkage, cleanup
  ARM: OMAP: /sys/kernel/debug/omap_gpio
  ARM: OMAP: Implement workaround for GPIO wakeup bug in OMAP2420 silicon
  ARM: OMAP: Enable 24xx GPIO autoidling
  [ARM] 4318/2: DSM-G600 Board Support
  [ARM] 4227/1: minor head.S fixups
  [ARM] 4328/1: Move i.MX UART regs to driver
  ...

Conflicts:

	include/asm-arm/arch-ixp4xx/io.h

Merge branches 'arm-mm', 'at91', 'clkevts', 'imx', 'iop', 'misc', 'netx', 'ns9xxx', 'omap', 'pxa', 'rpc', 's3c' and 'sa1100' into devel

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

utrace removes the ptrace_message field in task_struct.  Move our use
of this field into a new member in thread_info called "syscall"
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

I have found small bug in mconf, when you run it without any argument it
will sigsegv.

Without patch:
$ scripts/kconfig/mconf
Segmentation fault

With patch:
$ scripts/kconfig/mconf
can't find file (null)
Signed-off-by: Marcin Garski <mgarski@post.pl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

To introduce support for source in one directory but output files
in another directory during a non O= build prefix all paths
with $(src) repsectively $(obj).
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Sample:
config FOO
	bool "This is foo"
	depends on BAR

config BAR
	bool "This is bar"
	depends on FOO

This will result in following error message:
error: found recursive dependency: FOO -> BAR -> FOO

And will then exit with exit code equal 1 so make will stop.
Inspired by patch from: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: Roman Zippel <zippel@linux-m68k.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Fix typo in cifs readme from previous commit
  [CIFS] Make sec=none force an anonymous mount
  [CIFS] Change semaphore to mutex for cifs lock_sem
  [CIFS] Fix oops in reset_cifs_unix_caps on reconnect
  [CIFS] UID/GID override on CIFS mounts to Samba
  [CIFS] prefixpath mounts to servers supporting posix paths used wrong slash
  [CIFS] Update cifs version to 1.49
  [CIFS] Replace kmalloc/memset combination with kzalloc
  [CIFS]  Add IPv6 support
  [CIFS] New CIFS POSIX mkdir performance improvement (part 2)
  [CIFS] New CIFS POSIX mkdir performance improvement
  [CIFS] Add write perm for usr to file on windows should remove r/o dos attr
  [CIFS] Remove unnecessary parm to cifs_reopen_file
  [CIFS] Switch cifsd to kthread_run from kernel_thread
  [CIFS] Remove unnecessary checks

Signed-off-by: Steve French <sfrench@us.ibm.com>

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (231 commits)
  [PATCH] i386: Don't delete cpu_devs data to identify different x86 types in late_initcall
  [PATCH] i386: type may be unused
  [PATCH] i386: Some additional chipset register values validation.
  [PATCH] i386: Add missing !X86_PAE dependincy to the 2G/2G split.
  [PATCH] x86-64: Don't exclude asm-offsets.c in Documentation/dontdiff
  [PATCH] i386: avoid redundant preempt_disable in __unlazy_fpu
  [PATCH] i386: white space fixes in i387.h
  [PATCH] i386: Drop noisy e820 debugging printks
  [PATCH] x86-64: Fix allnoconfig error in genapic_flat.c
  [PATCH] x86-64: Shut up warnings for vfat compat ioctls on other file systems
  [PATCH] x86-64: Share identical video.S between i386 and x86-64
  [PATCH] x86-64: Remove CONFIG_REORDER
  [PATCH] x86-64: Print type and size correctly for unknown compat ioctls
  [PATCH] i386: Remove copy_*_user BUG_ONs for (size < 0)
  [PATCH] i386: Little cleanups in smpboot.c
  [PATCH] x86-64: Don't enable NUMA for a single node in K8 NUMA scanning
  [PATCH] x86: Use RDTSCP for synchronous get_cycles if possible
  [PATCH] i386: Add X86_FEATURE_RDTSCP
  [PATCH] i386: Implement X86_FEATURE_SYNC_RDTSC on i386
  [PATCH] i386: Implement alternative_io for i386
  ...

Fix up trivial conflict in include/linux/highmem.h manually.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It still used the long-deprecated "pci_module_init()" interface, rather
than the proper "pci_register_driver()" one.

[ I don't have the hardware, and I doubt many do, but the fix is
  trivial and obvious, and can't be worse than not compiling ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

  CC      fs/nfs/nfsroot.o
fs/nfs/nfsroot.c:131: error: tokens causes a section type conflict
make[2]: *** [fs/nfs/nfsroot.o] Error 1

This is due to mixing const and non-const content in the same section
which halfway recent gccs absolutely hate.  Fixed by dropping the const.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TG3]: Add TG3_FLAG_SUPPORT_MSI flag.
  [TG3]: Eliminate the TG3_FLAG_5701_REG_WRITE_BUG flag.
  [TG3]: Eliminate the TG3_FLAG_GOT_SERDES_FLOWCTL flag.
  [TG3]: Remove reset during MAC address changes.
  [TG3]: WoL fixes.
  [TG3]: Clear GPIO mask before storing.
  [TG3]: Improve NVRAM sizing.
  [TG3]: Fix TSO bugs.
  [MAC80211]: Add maintainers entry for mac80211.
  [MAC80211]: Add debugfs attributes.
  [MAC80211]: Add mac80211 wireless stack.
  [MAC80211]: Add generic include/linux/ieee80211.h
  [NETLINK]: Remove references to process ID
  [AF_IUCV]: Compile fix - adopt to skbuff changes.

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (87 commits)
  [SCSI] fusion: fix domain validation loops
  [SCSI] qla2xxx: fix regression on sparc64
  [SCSI] modalias for scsi devices
  [SCSI] sg: cap reserved_size values at max_sectors
  [SCSI] BusLogic: stop using check_region
  [SCSI] tgt: fix rdma transfer bugs
  [SCSI] aacraid: fix aacraid not finding device
  [SCSI] aacraid: Correct SMC products in aacraid.txt
  [SCSI] scsi_error.c: Add EH Start Unit retry
  [SCSI] aacraid: [Fastboot] Panics for AACRAID driver during 'insmod' for kexec test.
  [SCSI] ipr: Driver version to 2.3.2
  [SCSI] ipr: Faster sg list fetch
  [SCSI] ipr: Return better qc_issue errors
  [SCSI] ipr: Disrupt device error
  [SCSI] ipr: Improve async error logging level control
  [SCSI] ipr: PCI unblock config access fix
  [SCSI] ipr: Fix for oops following SATA request sense
  [SCSI] ipr: Log error for SAS dual path switch
  [SCSI] ipr: Enable logging of debug error data for all devices
  [SCSI] ipr: Add new PCI-E IDs to device table
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/voyager-2.6:
  [VOYAGER] add smp alternatives
  [VOYAGER] Use modern techniques to setup and teardown low identiy mappings.
  [VOYAGER] Convert the monitor thread to use the kthread API
  [VOYAGER] clockevents driver: bring voyager in to line
  [VOYAGER] clockevents: correct boot cpu is zero assumption
  [VOYAGER] add smp_call_function_single

The S3C2410_UDC_SETIX() macro is not used and won't be used by the udc
driver, so delete it.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

linux/mmc/protocol.h header is gone, thus breaking the build of the
mach-qt2410.c file. As this header is not used, I'm removing it. The
right headers may still be added later if needed.
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

And fix up the code to always allow MSI on 5714 A2.

Call tg3_find_peer() earlier because we need that information before
we can determine whether we can set TG3_FLAG_SUPPORT_MSI or not.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Without the following patch, the kernel does not automatically detect
2GB CompactFlash cards from Transcend.
Signed-off-by: Fabrice Aeschbacher <fabrice.aeschbacher@siemens.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Peter Stuge <peter@stuge.se>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

HPT36x chip don't seem to have the channel enable bits, so prevent the IDE core
from checking them...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Michal Kepien <michal.kepien@poczta.onet.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* fix ->speedproc to set the drive speed

* this driver doesn't support SWDMA so use the correct ->swdma_mask

* BUG() if an unsupported mode is passed to ->speedproc
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This driver doesn't support SWDMA so use the correct ->swdma_mask.

While at it:

* no need to call config_chipset_for_pio() in config_chipset_for_dma(),
  if DMA is not available config_chipset_for_pio() will be called
  by siimage_config_drive_for_dma() and if DMA is available
  config_siimage_chipset_for_pio() will be called by siimage_tune_chipset()

* remove needless config_chipset_for_pio() wrapper

* bump driver version
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* limit max PIO mode to PIO4, this driver doesn't support PIO5 and attempt
  to setup PIO5 by it821x_tuneproc() could result in incorrect PIO timings
  + incorrect base clock being set for controller in the passthrough mode

* move code limiting max PIO according to the pair device capabilities from
  config_it821x_chipset_for_pio() to it821x_tuneproc() so the check is also
  applied for mode change requests coming through ->tuneproc and ->speedproc
  interfaces

* set device speed in it821x_tuneproc()

* in it821x_tune_chipset() call it821x_tuneproc() also if the controller is
  in the smart mode (so the check for pair device max PIO is done)

* rename it821x_tuneproc() to it821x_tune_pio(), then add it821x_tuneproc()
  wrapper which does the max PIO mode check;  it worked by the pure luck
  previously, pio[4] and pio_want[4] arrays were used with index == 255
  so random PIO timings and base clock were set for the controller in the
  passthrough mode, thankfully PIO timings and base clock were corrected
  later by config_it821x_chipset_for_pio() call (but it was not called for
  PIO-only devices during resume and for user requested PIO autotuning)

* remove config_it821x_chipset_for_pio() call from config_chipset_for_dma()
  as the driver sets ->autotune to 1 and ->tuneproc does the proper job now

* convert the last user of config_it821x_chipset_for_pio() to use
  it821x_tuneproc(drive, 255) and remove no longer needed function

While at it:

* fix few comments

* bump driver version
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

There is no reason to limit DMA to ide_cdrom type devices.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

If DMA tuning fails always set the best PIO mode.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Teach the driver's tuneproc() method to do PIO auto-runing properly since it
treated 5 instead of 255 as auto-tune request, and also passed the mode limit
of PIO5 to ide_get_best_pio_mode() despite supporting up to PIO4 only.

While at it, also:

- remove the driver's wrong claim about supporting SWDMA modes;

- stop hooking ide_dma_timeout() method as the handler clearly doesn't fit for
  the task...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Fold the parts of the ide_dma_end() methods identical to __ide_dma_end() into a
mere call to it.
Start using faster versions of the ide_dma_end() and ide_dma_test_irq() methods
for the PCI0646U and newer chips that have the duplicate interrupt status bits
in the I/O mapped MRDMODE register, determing what methods to use at the driver
load time. Do some cleanup/renaming in the "old" ide_dma_test_irq() method too.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>