- 24 Jul, 2009 40 commits
-
-
Luis R. Rodriguez authored
We were treating ieee80211_regdom module parameter hints as core hints, this means we were not letting the user help compliance further when using the module parameter. It also meant that users with a device with a custom regulatory domain set (wiphy->custom_regulatory) using this module parameter were being stuck to the original default core static regualtory domain. We fix this by using the static cfg80211_regdomain alpha2 as the core hint and treating the module parameter separately. All iwlwifi and ath5k/ath9k/ar9170 devices which world roam set the wiphy->custom_regulatory. This change allows users using this module parameter to have it trated as a a proper user hint and not have it ignored. Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Luis R. Rodriguez authored
This uses the new configuration changes indicated up by mac80211 when all interfaces are marked idle. We need to do a little more work as we have our own set of virtual wiphys within ath9k. Only when all virtual wiphys are inactive do we allow an idle state change for a wiphy to trigger disabling the radio. Signed-off-by:
-
Gabor Juhos authored
These functions are changing the power mode of the chip, but this may have unpredictable effects, if another code are trying to set the power mode via 'ath9k_hw_setpower' in the same time from another context. Changes-licensed-under: ISC Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Signed-off-by:
-
Gabor Juhos authored
Uninline these functions before we add functional changes to them. Changes-licensed-under: ISC Signed-off-by:
-
Gabor Juhos authored
Because ath9k_setpower is called from various contexts, we have to protect it against concurrent calls. Changes-licensed-under: ISC Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Update tx BA window and complete the frame as failed one if we can't clone the holding descriptor due to unavailability of descriptors. Signed-off-by:
-
Vasanthakumar Thiagarajan authored
oops, this one should be part of the original patch "ath9k: downgrade assert in ath_clone_txbuf()" Signed-off-by:
-
Senthil Balasubramanian authored
The hardware doesn't generate interrupts in some cases and so work around this by monitoring the TX status periodically and reset the chip if required. This behavior of the hardware not generating the TX interrupts can be noticed through ath9k debugfs interrupt statistics when heavy traffic is being sent from STA to AP. One can easily see this behavior when the STA is transmitting at a higher rates. The interrupt statistics in the debugfs interface clearly shows that only RX interrupts alone being generated and TX being stuck. TX should be monitored through a timer and reset the chip only when frames are queued to the hardware but TX interrupts are not generated for the same even after one second. Also, we shouldn't remove holding descriptor from AC queue if it happens to be the only descriptor and schedule TX aggregation regarless of queue depth as it improves scheduling of AMPDUs from software to hardware queue. Signed-off-by:
Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by:
-
Senthil Balasubramanian authored
Running iperf along with p2p traffic on both TX and RX side then stop one side, then stop the other side, then start it up again, eventually the STA gets into a mode that it can not pass data at all. A hardware workaround for invalid RSSI can make FIFO write pointer to jump over read pointer, causing RX data corruption and repeated DMA. Both TX and RX works fine when the workaround is disabled. To replace the original hardware work around, software looks for frames with post delimiter CRC error and mark the RSSI invalid so that the upperlayer will not use the RSSI associated with this frame. So disable the hardware workaround by updating the appropriate registers. Signed-off-by:
-
Senthil Balasubramanian authored
RSSI reported by the RX descriptor requires little manipulation. Manipulate and report the correct RSSI to the stack. This will fix the improper signal levels reported by iwconfig iw dev wlanX station dump. Also the Link Quality reported seems to be varying (falls to zero also sometimes) when iperf is run from STA to AP. Also use the default noise floor for now as the one reported during the caliberation seems to be wrong. The Signal and Link Quality before this patch (taken while TX is in progress from STA to AP) 09:59:13.285428037 Link Quality=29/70 Signal level=-81 dBm 09:59:13.410660084 Link Quality=20/70 Signal level=-90 dBm 09:59:13.586864392 Link Quality=21/70 Signal level=-89 dBm 09:59:13.710296281 Link Quality=21/70 Signal level=-89 dBm 09:59:13.821683064 Link Quality=25/70 Signal level=-85 dBm 09:59:13.933402989 Link Quality=24/70 Signal level=-86 dBm 09:59:14.045839276 Link Quality=26/70 Signal level=-84 dBm 09:59:14.193926673 Link Quality=23/70 Signal level=-87 dBm 09:59:14.306230262 Link Quality=31/70 Signal level=-79 dBm 09:59:14.419459667 Link Quality=26/70 Signal level=-84 dBm 09:59:14.530711167 Link Quality=37/70 Signal level=-73 dBm 09:59:14.642593962 Link Quality=29/70 Signal level=-81 dBm 09:59:14.754361169 Link Quality=21/70 Signal level=-89 dBm 09:59:14.866217355 Link Quality=21/70 Signal level=-89 dBm 09:59:14.976963623 Link Quality=28/70 Signal level=-82 dBm 09:59:15.089149809 Link Quality=26/70 Signal level=-84 dBm 09:59:15.205039887 Link Quality=27/70 Signal level=-83 dBm 09:59:15.316368003 Link Quality=23/70 Signal level=-87 dBm 09:59:15.427684036 Link Quality=36/70 Signal level=-74 dBm 09:59:15.539756380 Link Quality=21/70 Signal level=-89 dBm 09:59:15.650549093 Link Quality=22/70 Signal level=-88 dBm 09:59:15.761171672 Link Quality=32/70 Signal level=-78 dBm 09:59:15.872793750 Link Quality=23/70 Signal level=-87 dBm 09:59:15.984421694 Link Quality=22/70 Signal level=-88 dBm 09:59:16.097315093 Link Quality=21/70 Signal level=-89 dBm The link quality and signal level after this patch (take while TX is in progress from STA to AP) 17:21:25.627848091 Link Quality=65/70 Signal level=-45 dBm 17:21:25.762805607 Link Quality=65/70 Signal level=-45 dBm 17:21:25.875521888 Link Quality=66/70 Signal level=-44 dBm 17:21:25.987468448 Link Quality=66/70 Signal level=-44 dBm 17:21:26.100628151 Link Quality=66/70 Signal level=-44 dBm 17:21:26.213129671 Link Quality=66/70 Signal level=-44 dBm 17:21:26.324923070 Link Quality=65/70 Signal level=-45 dBm 17:21:26.436831357 Link Quality=65/70 Signal level=-45 dBm 17:21:26.610356973 Link Quality=65/70 Signal level=-45 dBm 17:21:26.723340047 Link Quality=65/70 Signal level=-45 dBm 17:21:26.835715293 Link Quality=64/70 Signal level=-46 dBm 17:21:26.949542748 Link Quality=64/70 Signal level=-46 dBm 17:21:27.062261613 Link Quality=65/70 Signal level=-45 dBm 17:21:27.174511563 Link Quality=64/70 Signal level=-46 dBm 17:21:27.287616232 Link Quality=64/70 Signal level=-46 dBm 17:21:27.400598119 Link Quality=64/70 Signal level=-46 dBm 17:21:27.511381404 Link Quality=64/70 Signal level=-46 dBm 17:21:27.624530421 Link Quality=65/70 Signal level=-45 dBm 17:21:27.737807109 Link Quality=64/70 Signal level=-46 dBm 17:21:27.850861352 Link Quality=65/70 Signal level=-45 dBm 17:21:27.963369436 Link Quality=64/70 Signal level=-46 dBm 17:21:28.076582289 Link Quality=64/70 Signal level=-46 dBm Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Move its only member (u8 per) to struct ath_rate_priv. Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Get rid of rssi reduce interval. Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
ath9k rate control is based on only PER (packet error rate), remove unused code which was intented to do rssi based rate selection. Signed-off-by:
-
Luis R. Rodriguez authored
After the cleanup we just use get_rate as a wrapper, skip the wrapper. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
All current rate control algorithms agree to send management and no-ack frames at the lowest rate. They also agree to do this when sta and the private rate control data is NULL. We add a hlper to mac80211 for this and simplify the rate control algorithm code. Developers wishing to make enhancements to rate control algorithms are for broadcast/multicast can opt to not use this in their gate_rate() mac80211 callback. Cc: Zhu Yi <yi.zhu@intel.com> Acked-by:
Reinette Chatre <reinette.chatre@intel.com> Cc: ipw3945-devel@lists.sourceforge.net Cc: Gabor Juhos <juhosg@openwrt.org> Acked-by:
Felix Fietkau <nbd@openwrt.org> Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
iwl-agn-rs.c already uses this. Cc: Zhu Yi <yi.zhu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: ipw3945-devel@lists.sourceforge.net Signed-off-by:
-
Luis R. Rodriguez authored
Cc: Felix Fietkau <nbd@openwrt.org> Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
We check for this condition early on in our mac80211 get_rate() callback ath_get_rate(), so remove this check later down the path. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
The purpose is to find the highest rate we can use. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
There are a lot of gaps here. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
This saves us 2733 bytes. text data bss dec hex filename 252265 3628 1584 257477 3edc5 ath9k-has-b-rate.ko 249905 3628 1584 255117 3e48d ath9k.ko Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Siged-off-by:
-
Luis R. Rodriguez authored
Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
What this does is get us our next lower rate so call it that, ath_rc_get_lower_rix(). Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
This is just calling another helper, so just use the other helper directly. This should make it clear that when do not find the next rate we stick to the current one. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
This is not used, remove this. Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
This is not used, and when we need to get the lowest rate we should simply use mac80211's own rate_lowest_index(sband, sta). Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
This has no functional change and just cleans up the code to be more legible and removes a useless variable for Multi Rate Retry. For regular frames we use 2 retries for MRR segments [0-2]. For the last MRR segment [3] we use 4. MRR[0] = 2 MRR[1] = 2 MRR[2] = 2 MRR[3] = 4 Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by:
-
Luis R. Rodriguez authored
This removes the work around implemented for transmitting on an unsupported band on iwlwifi. This was added via the patch: 8e1856e82cb8f541e925738bebfbc473420cda68: iwlwifi: fix rs_get_rate WARN_ON() Cc: Mohamed Abbas <mohamed.abbas@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Luis R. Rodriguez authored
The case where no vaid rate is found should not happen now but to help debugging and downgrade this to a warn. Signed-off-by:
-
Luis R. Rodriguez authored
When we're associated we should be able to send data to target sta. If we cannot we may be trying to use the incorrect band to talk to the sta. Lets catch any such cases, warn, and drop the frames to not invalidate assumptions being made on rate control algorithms when they have a valid sta to communicate with. Any such cases should be handled and fixed. Signed-off-by:
-
Jiri Slaby authored
Add omitted mutex_unlock to one of wl12xx_op_start fail paths (when wl12xx_chip_wakeup fails). [v2] Power off the device, because: \= cite from http://marc.info/?l=linux-kernel&m=124755028209880&w=2 If the chip cannot be booted, why should it remain powered on? In some rare cases, the chip might fail to initialize, but can recover if powered off and on again, so turning it off at this point is the right thing to do. =/ Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Reviewed-by:
Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by:
-
Johannes Berg authored
iwl_dump_nic_error_log can be static and iwl_dump_nic_event_log doesn't need to be exported. Signed-off-by:
-
Hin-Tak Leung authored
Adding more detailed info about Asus motherboards and Ralink devices. Signed-off-by:
Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by:
Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by:
-
Hin-Tak Leung authored
New device supported by the zd1211rw driver reported to linux-wireless. Device string from lsusb: "ID 083a:e501 Accton Technology Corp. ZD1211B" RF type from dmesg: zd1211b chip 083a:e501 v4810 high 00-1a-2a AL2230_RF pa0 g--NS Signed-off-by:
-
Johannes Berg authored
The work that we cancel there requires the cfg80211_mutex, so we can't cancel it under the mutex, which is fine, we can just move it to after the locked section. Signed-off-by:
-
Johannes Berg authored
In "mac80211: monitor the connection" I forgot to add code to cancel the new timers & work when the interface is brought down, which isn't a problem if you just bring it down, but _is_ a problem when you destroy the interface. Correct this lapse. Signed-off-by:
-
Julia Lawall authored
The result of container_of should not be NULL. In particular, in this case the argument to the enclosing function has passed though INIT_WORK, which dereferences it, implying that its container cannot be NULL. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ identifier fn,work,x,fld; type T; expression E1,E2; statement S; @@ static fn(struct work_struct *work) { ... when != work = E1 x = container_of(work,T,fld) ... when != x = E2 - if (x == NULL) S ... } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
Zhu Yi <yi.zhu@intel.com> Signed-off-by:
-
Gábor Stefanik authored
cfg80211_set_wpa_version completely missed the use case when disabling WPA, considering IW_AUTH_WPA_VERSION_DISABLED an invalid argument. This caused weird error messages in wpa_supplicant. Signed-off-by:
-
