- 19 Aug, 2009 2 commits
-
-
Wu Fengguang authored
The BIOS pin configs are in fact correct and shall not be overwritten. Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Wu Fengguang authored
HP Compaq 6530s and 6531s internal speaker is silence or becomes silence within 1 minute after fresh boot. It is found that pin 0x1c must be set to PIN_OUT mode to make the speaker work. This is weird - line-in pin 0x1c and speaker pin 0x16 seem to be unrelated. The codec differences before/after patch are: @@ Node 0x17 [Pin Complex] wcaps 0x40020b: Pin Default 0x41a6e130: [N/A] Mic at Ext Rear Conn = Digital, Color = White DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE - Pin-ctls: 0x24: IN + Pin-ctls: 0x40: OUT @@ Node 0x1c [Pin Complex] wcaps 0x40018d: Pin Default 0x41813021: [N/A] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x2, Sequence = 0x1 - Pin-ctls: 0x24: IN VREF_80 + Pin-ctls: 0x40: OUT VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 1 0x24 Tests show that it won't impact (external) Mic recording. Reported-by:"Lin, Ming M" <ming.m.lin@intel.com> Signed-off-by:
-
- 11 Aug, 2009 1 commit
-
-
Takashi Iwai authored
ALC269 and ALC861-VD parsers override the ADC definitions unconditionally without checking the spec definition. This causes the problem when any inconsistent ADC is set up in the device quirk (like ALC272 with digital-mic). This patch avoids the overriding by adding the proper checks. Reference: Novell bnc#529467 https://bugzilla.novell.com/show_bug.cgi?id=529467Signed-off-by:
-
- 10 Aug, 2009 1 commit
-
-
Takashi Iwai authored
Without the initialization of vmaster NID, the dB information got confused for ALC269 codec. Reference: Novell bnc#527361 https://bugzilla.novell.com/show_bug.cgi?id=527361Signed-off-by:
-
- 03 Aug, 2009 9 commits
-
-
Roel Kluin authored
Check whether index is within bounds before testing the element. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Chengu Wang authored
The commit 24918b61 statically changes the model from dell-bios to dell-3stack to solve the sound decreasing regression (http://lkml.org/lkml/2008/9/12/203), however it leads to another problem that the 2nd headphone jack doesn't work (https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3987). So I think the commit 249**2dc is just a workaround. I would like to give a true solution here. The datasheet for STAC9228 says, GPIO2 is the same pin as VOL DOWN, and the EAPD pin is GPIO0. This is why the sound decreases if we set EAPD as GPIO2. This patch changes EAPD to GPIO0 to solve the problem. Signed-off-by:
Chengu Wang <wangchengu@gmail.com> Signed-off-by:
-
Wu Fengguang authored
To help disclose hardware bugs. Signed-off-by:
-
Wu Fengguang authored
Signed-off-by:
-
Wu Fengguang authored
This converts the last CORBWP access outside of reg_lock. Signed-off-by:
-
Wu Fengguang authored
Just for safety. azx_init_cmd_io() and azx_free_cmd_io() may be called when switching to single command mode. Signed-off-by:
-
Wu Fengguang authored
Now that each codec will have its own module, it is possible for the user to load one codec while another one is running. So cmd_mutex would be a safe addition to probe_codec(). Signed-off-by:
-
Wu Fengguang authored
Recently we hit a bug in our dev board, whose HDMI codec#3 may emit redundant/spurious responses, which were then taken as responses to command for another onboard Realtek codec#2, and mess up both codecs. Extend the azx_rb.cmds and azx_rb.res to array and track each codec's commands/responses separately. This helps keep good codec safe from broken ones. Signed-off-by:
-
Takashi Iwai authored
Use model=lenovo instead of model=dallas for Toshiba Satellite A135-S4527 with ALC861-VD codec. Reference: Novell bnc#526325 https://bugzilla.novell.com/show_bug.cgi?id=526325Signed-off-by:
-
- 31 Jul, 2009 1 commit
-
-
Takashi Iwai authored
The name buf with size 16 is too short for some codec names, e.g. truncated like "ALC861-VD Analo". Now the size is doubled. Signed-off-by:
-
- 29 Jul, 2009 1 commit
-
-
Roel Kluin authored
e->sad[] is declared with size ELD_MAX_SAD=16, but the guard allows range 0-31. Signed-off-by:
-
- 27 Jul, 2009 1 commit
-
-
Takashi Iwai authored
Added a quirk entry for Dell Studio 1555. Reference: Novell bnc#525244 https://bugzilla.novell.com/show_bug.cgi?id=525244Signed-off-by:
-
- 24 Jul, 2009 1 commit
-
-
Takashi Iwai authored
The master mute switch is wrongly implemented as checking the pointer instead of its value, thus it can be never muted. This patch fixes the issue. Reference: Novell bnc#404873 https://bugzilla.novell.com/show_bug.cgi?id=404873Signed-off-by:
-
- 22 Jul, 2009 2 commits
-
-
Takashi Iwai authored
The commit 099db17e introduced a regression at suspend/resume where the GPIO1 bit isn't properly restored, thus the speaker output gets muted initially after resume. The fix is simple, use the cached write for storing GPIO data. Reference: Novell bnc#522764 https://bugzilla.novell.com/show_bug.cgi?id=522764Signed-off-by:
-
Takashi Iwai authored
Use snprint() for creating the jack name string instead of sprintf() in patch_sigmatel.c. Signed-off-by:
-
- 20 Jul, 2009 2 commits
-
-
Takashi Iwai authored
The recent rewrite of the codec parser for STAC9872 caused a regression for some Sony VAIO models that don't give proper pin default configs by BIOS. Even using model=vaio doesn't work because the pin definitions are set after the pin overrides. This patch fixes the pin definitions in patch_stac9872() to be put in the right place before the pin overrides. Also the patch adds the new quirk entry for VAIO F/S to have the correct pin default configs. Signed-off-by: -
Hao Song authored
Gateway T6834c laptops need EAPD always on while the default behavior for the STAC9205 reference board is to turn it off upon every HP plug. By using the special "eapd" model, which is first introduced for Gateway T1616 laptops for this same reason, this peculiarity can be properly handled. Signed-off-by:
Hao Song <baritono.tux@gmail.com> Cc: <stable@kernel.org> Signed-off-by:
-
- 19 Jul, 2009 1 commit
-
-
Jaroslav Kysela authored
To prevent "Too many connections" message and the error path for some HDMI codecs (which makes onboard audio unusable), check for invalid zero connections for CONNECT_LIST verb. Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Signed-off-by:
-
- 10 Jul, 2009 1 commit
-
-
Jaroslav Kysela authored
On some IbexPeak systems with ALC889A errors like "azx_get_response timeout, switching to polling mode: last cmd=0xaf9f000b" are produced, because non-existent codec #10 is wrongly accessed. The problem is that snd_hda_get_connections() returns out-of-range result for NID 0x1c (something like 0xf8f9 or 0xffff). This patch adds a check to alc880_parse_auto_config() to avoid using of this out-of-range NIDs. A better fix maybe to improve snd_hda_get_connections() routine to check for valid NID ranges if NIDs are expected as result. Signed-off-by:
-
- 09 Jul, 2009 2 commits
-
-
David Heidelberger authored
Simplify ALC882_TARGA and return gpio3 to ALC883_TARGA_DIG and ALC883_TARGA_2ch_DIG, which I accidentally removed in commit id 64a8be74Signed-off-by:
David Heidelberger <d.okias@gmail.com> Signed-off-by:
-
Paul Vojta authored
In the beep tone calculation for IDT/STAC codecs, lower numbers correspond to higher frequencies and vice versa. The current code has this backwards, resulting in beep frequencies which are way too high (and sound bad on tinny laptop speakers, resulting in complaints). [Also added hz <= 0 check by tiwai] Signed-off-by:
Paul Vojta <vojta@math.berkeley.edu> Signed-off-by:
-
- 08 Jul, 2009 3 commits
-
-
Darren Salt authored
There is a regression, introduced in aa202455 (in alsa-kernel) which I noticed when trying to use the headphone socket on my EeeCPC 901: the output was *very* quiet, practically silent. This patch corrects the control types to that which was obviously intended in the referenced commit. Signed-off-by:
Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by:
-
Andiry Brienza authored
HDA driver disabled HD audio 64bit address support for all AMD SB600/SB700/SB800 platforms with commit 09240cf4 due to one SB600 issue reported by community, but we do not see the similar issue on SB700/SB800 platforms. This patch is to refine the workaround for SB600 only. Signed-off-by:
Andiry Xu <andiry.xu@amd.com> Signed-off-by:
-
Takashi Iwai authored
Check the widget type and don't take invalid widgets while parsing the capture source in patch_via.c. Also, fixed some compile warnings introduced in the previous commit. Signed-off-by:
-
- 07 Jul, 2009 3 commits
-
-
Takashi Iwai authored
The fixed widget NIDs in patch_via.c seem wrong for some codecs, and it resulted in the invalid capture source selection. This patch adds the code to parse the topology instead of using fixed numbers in order to get the right MUX widget id corresponding to the ADCs. Signed-off-by: -
Takashi Iwai authored
If the output pin is used and EAPD capability is present, turn on the EAPD bit. This fixes the silent output problem on ASUS laptops with VT1708S codec. Signed-off-by: -
Takashi Iwai authored
Minor clean up for initializing the digital-in pin. No functional changes. Signed-off-by:
-
- 05 Jul, 2009 1 commit
-
-
Takashi Iwai authored
Release resources cleanly after errors in the sanity check in azx_pcm_open(). Signed-off-by:
-
- 04 Jul, 2009 1 commit
-
-
Herton Ronaldo Krzesinski authored
Signed-off-by:
Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by:
-
- 03 Jul, 2009 5 commits
-
-
Takashi Iwai authored
Add some sanity checks of struct snd_pcm_hardware fields in the PCM open callback of hda driver. This makes a bit easier to debug any PCM setup errors in the codec side. Signed-off-by: -
Takashi Iwai authored
The PCM rates bit field may have been changed by the codec open callback. In that case, we need to reset rate_min and rate_max. So, simply call snd_pcm_lib_hw_rates() again after the codec open callback. Signed-off-by: -
Takashi Iwai authored
Check whether formats and rates don't result in zero due to the restriction of SPDIF sharing. If any of them can be zero, disable the SPDIF sharing mode instead. Otherwise it will lead to a PCM configuration error. Signed-off-by: -
Takashi Iwai authored
The mixer elements created for ASUS eeePC 1000 with ALC269 aren't standard but strange words like "LineOut". Rename the element names to follow the standard one like "Headphone" and "Speaker". Also, split the volumes to each so that the virtual master can control them. The alc269_fujitsu_mixer is removed because it's now identical with the new eeepc mixer. Signed-off-by: -
Takashi Iwai authored
HP laptops with AD1984A codecs (at least mobile models) need to set GPIO1 appropriately to indicate the mute state. The BIOS checks this bit to judge whether the mute on or off is sent via F8 key. Without changing this bit, the BIOS can be confused and may toggle the mute wrongly. Reference: Novell bnc#515266 https://bugzilla.novell.com/show_bug.cgi?id=515266Signed-off-by:
-
- 01 Jul, 2009 2 commits
-
-
Takashi Iwai authored
Added a quirk model=laptop for HP 6930p (103c:30dc) with AD1984A codec. Signed-off-by: -
Takashi Iwai authored
Signed-off-by:
-
